All MIBs › APTIS-MONITOR-MIB › sessionStatusInactiveTxStartDataRate
sessionStatusInactiveTxStartDataRate
Module: APTIS-MONITOR-MIB
OID (symbolic): APTIS-MONITOR-MIB::sessionStatusInactiveTxStartDataRate
OID (numeric): 1.3.6.1.4.1.2637.2.2.103.1.39
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The transmit DCE data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle.
What is sessionStatusInactiveTxStartDataRate?
Read-only transmit-side DCE data rate recorded for this now-ended session: for modem sessions it's the initial rate reported by modem negotiation (it may not track later rate changes during the call), for ISDN it's the actual data service rate of the call, and for Frame Relay or other interfaces it's the nominal speed of the physical interface. As with the receive-side rate, it is not a measure of current line utilization, effective bandwidth, or a QoS guarantee, and for a PPP multilink call it reflects only this one link, not the combined bundle rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2637.2.2.103.1.39 snmpwalk -v2c -c public <target> APTIS-MONITOR-MIB::sessionStatusInactiveTxStartDataRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2637.2.2.103.1.39.1 snmpget -v2c -c public <target> APTIS-MONITOR-MIB::sessionStatusInactiveTxStartDataRate.1
Start monitoring Nortel Networks Aptis DSL concentrator/access multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APTIS-MONITOR-MIB::sessionStatusInactiveTxStartDataRate OID value, configure state conditions and alerts, and monitor any Nortel Networks Aptis DSL concentrator/access multiplexer (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2637 | aptis | APTIS-MIB |
| 1.3.6.1.4.1.2637.2 | aptis_generic | APTIS-MIB |
| 1.3.6.1.4.1.2637.2.2 | aptis_monitoring | APTIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2637.2.2.103 | sessionStatusInactiveTable | APTIS-MONITOR-MIB |
| 1.3.6.1.4.1.2637.2.2.103.1 | sessionStatusInactiveEntry | APTIS-MONITOR-MIB |
| 1.3.6.1.4.1.2637.2.2.103.1.39 | sessionStatusInactiveTxStartDataRate | APTIS-MONITOR-MIB |