All MIBs › APTIS-MONITOR-MIB › sessionStatusActiveTxStartDataRate
sessionStatusActiveTxStartDataRate
Module: APTIS-MONITOR-MIB
OID (symbolic): APTIS-MONITOR-MIB::sessionStatusActiveTxStartDataRate
OID (numeric): 1.3.6.1.4.1.2637.2.2.102.1.39
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The transmit DCE data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle.
What is sessionStatusActiveTxStartDataRate?
Reports the transmit DCE data rate for this session — the transmit-direction counterpart to sessionStatusActiveRxStartDataRate: for modem calls it's the DCE rate from initial negotiation (may not reflect later changes), for ISDN it's the actual data service rate, and for Frame Relay or other interface types it's the nominal interface speed, possibly shared across sessions. It is read-only, is explicitly not a guarantee of quality-of-service or current line utilization, and for PPP multilink sessions it reflects only this one link rather than the bundle's combined rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2637.2.2.102.1.39 snmpwalk -v2c -c public <target> APTIS-MONITOR-MIB::sessionStatusActiveTxStartDataRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2637.2.2.102.1.39.1 snmpget -v2c -c public <target> APTIS-MONITOR-MIB::sessionStatusActiveTxStartDataRate.1
Start monitoring Nortel Networks Aptis DSL concentrator/access multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APTIS-MONITOR-MIB::sessionStatusActiveTxStartDataRate OID value, configure state conditions and alerts, and monitor any Nortel Networks Aptis DSL concentrator/access multiplexer (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2637 | aptis | APTIS-MIB |
| 1.3.6.1.4.1.2637.2 | aptis_generic | APTIS-MIB |
| 1.3.6.1.4.1.2637.2.2 | aptis_monitoring | APTIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2637.2.2.102 | sessionStatusActiveTable | APTIS-MONITOR-MIB |
| 1.3.6.1.4.1.2637.2.2.102.1 | sessionStatusActiveEntry | APTIS-MONITOR-MIB |
| 1.3.6.1.4.1.2637.2.2.102.1.39 | sessionStatusActiveTxStartDataRate | APTIS-MONITOR-MIB |