APTIS-MONITOR-MIB :: sessionStatusHistoryRxStartDataRate

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPTIS-MONITOR-MIBsessionStatusHistoryRxStartDataRate

sessionStatusHistoryRxStartDataRate

Module: APTIS-MONITOR-MIB

OID (symbolic): APTIS-MONITOR-MIB::sessionStatusHistoryRxStartDataRate

OID (numeric): 1.3.6.1.4.1.2637.2.2.107.1.40

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The receive data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle.

What is sessionStatusHistoryRxStartDataRate?

This records the receive data rate negotiated at session start. Like transmit rate, it varies by connection type. For example, 33600 bps might be the initial receive rate for a modem session.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2637.2.2.107.1.40
snmpwalk -v2c -c public <target> APTIS-MONITOR-MIB::sessionStatusHistoryRxStartDataRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2637.2.2.107.1.40.1
snmpget -v2c -c public <target> APTIS-MONITOR-MIB::sessionStatusHistoryRxStartDataRate.1

Start monitoring Nortel Networks Aptis DSL concentrator/access multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APTIS-MONITOR-MIB::sessionStatusHistoryRxStartDataRate OID value, configure state conditions and alerts, and monitor any Nortel Networks Aptis DSL concentrator/access multiplexer (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2637aptisAPTIS-MIB
1.3.6.1.4.1.2637.2aptis_genericAPTIS-MIB
1.3.6.1.4.1.2637.2.2aptis_monitoringAPTIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2637.2.2.107sessionStatusHistoryTableAPTIS-MONITOR-MIB
1.3.6.1.4.1.2637.2.2.107.1sessionStatusHistoryEntryAPTIS-MONITOR-MIB
1.3.6.1.4.1.2637.2.2.107.1.40sessionStatusHistoryRxStartDataRateAPTIS-MONITOR-MIB