ALCATEL-IND1-VIRTUALROUTER-MIB

All MIBs › ALCATEL-IND1-VIRTUALROUTER-MIB

Organization: Alcatel-Lucent

Last Updated: 2013-08-23

Category: Routing Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch virtual router MIB for managing VRF routing instances, interface assignments, and route leaking.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-VIRTUALROUTER-MIB?

ALCATEL-IND1-VIRTUALROUTER-MIB is a proprietary Alcatel-Lucent OmniSwitch enterprise MIB for configuring Virtual Router (VRF) instances, letting a single switch host multiple isolated routing tables for services such as multi-tenant routing and route leaking. It exposes configuration data including virtual router names, associated routing profiles, and resource-limit parameters such as max route maps, sequences, TLVs, access lists, and address blocks. Its monitoring value is primarily software/configuration-state oriented: confirming which virtual router instances exist, their row status (active/provisioned), and whether configured resource limits are close to or have hit capacity, which can indicate a scaling problem before it causes routing failures. It builds on general VRF/virtual-routing concepts common across router vendors but implements them via Alcatel-specific objects. It is deployed on OmniSwitch platforms used for multi-tenant or segmented routing environments, such as service-provider edge or enterprise multi-department networks. Engineers can download the ALCATEL-IND1-VIRTUALROUTER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-VIRTUALROUTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch (virtual routing/VRF-capable switches)

Monitoring Examples

An operator would walk alaVirtualRouterNameTable/alaVirtualRouterNameEntry to enumerate configured VRF instances via alaVirtualRouterName and alaVirtualRouterNameIndex, checking alaVirtualRouterNameRowStatus to confirm each is active. Comparing configured usage against alaVirtualRouterMaxRouteMaps, alaVirtualRouterMaxAccessLists, and alaVirtualRouterMaxAddressBlocks would reveal whether a VRF is approaching its provisioning ceiling, a leading indicator of route-map or ACL failures. alaVirtualRouterProfile lets an admin confirm which resource profile (and thus which limit set) a given VRF is using.

What Can Be Monitored

configured VRF instances and names
VRF row/provisioning status
route-map/sequence/ACL resource limits vs. usage
address block limits
virtual router profile assignment

Imported Objects

From ALCATEL-IND1-BASE

routingIND1Vrf

OBJECT-IDENTITY

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
alaVirtualRouterCompliance	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2.1.1			The compliance statement for routers running Route Maps and implementing the ALCATEL-IND1-VIRTUALROUTER MIB.
alaVirtualRouterConfig	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1
alaVirtualRouterConfigMIBGroup	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2.2.1			A collection of objects to support management of global configuration parameters of the Virtual Router Module.
I32 alaVirtualRouterMaxAccessLists	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.8	Integer32	read-only	The maximum number of access-lists allowed in this VRF.
I32 alaVirtualRouterMaxAddressBlocks	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.9	Integer32	read-only	The maximum number of access-list address blocks allowed in this VRF.
I32 alaVirtualRouterMaxMatchInterfaces	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.10	Integer32	read-only	The maximum number of route-map match interfaces allowed in this VRF.
I32 alaVirtualRouterMaxRouteMaps	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.5	Integer32	read-only	The maximum number of route-maps allowed in this VRF.
I32 alaVirtualRouterMaxSequences	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.6	Integer32	read-only	The maximum number of route-map sequences allowed in this VRF.
I32 alaVirtualRouterMaxTlvs	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.7	Integer32	read-only	The maximum number of route-map TLV blocks allowed in this VRF.
STR alaVirtualRouterName	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.1	SnmpAdminString	not-accessible	The name of a Virtual Router.
alaVirtualRouterNameEntry	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1		not-accessible	Each entry binds a Virtual Router Name to a Virtual Router index.
I32 alaVirtualRouterNameIndex	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.2	Integer32	read-only	The index associated with the Virtual Router name.
ROW alaVirtualRouterNameRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.3	RowStatus	read-create	Controls creation and deletion of Row Status entries.
alaVirtualRouterNameTable	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1		not-accessible	Table containing Virtual Router Name to Virtual Router Index bindings. There is always an entry for the default Virtual Router which has the name default
T/F alaVirtualRouterNoAutoLoadVrrp	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.11	TruthValue	read-create	If true, do not automatically load VRRP in max profile VRF.
STR alaVirtualRouterProfile	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.4	SnmpAdminString	read-create	The profile name of the VRF. Profiles place constraints on what the VRF can contain.
alaVirtualRouterProfileEntry	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1		not-accessible	Each entry defines a VRF profile.
I32 alaVirtualRouterProfileMaxAccessLists	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.5	Integer32	read-write	The maximum number of route-map access-lists supported in this VRF profile. Access-lists contain IPv4 or IPv6 addresses.
I32 alaVirtualRouterProfileMaxAddressBlocks	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.6	Integer32	read-write	The maximum number of route-map address blocks supported in this VRF profile. Address blocks are used to hold the access-lists routes.
I32 alaVirtualRouterProfileMaxMatchInterfaces	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.7	Integer32	read-write	The maximum number of route-map interfaces that can be configured match clauses supported in this VRF profile.
I32 alaVirtualRouterProfileMaxRouteMaps	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.2	Integer32	read-write	The maximum number of route-maps supported in this VRF profile.
I32 alaVirtualRouterProfileMaxSequences	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.3	Integer32	read-write	The maximum number of route-map sequences supported in this VRF profile.
I32 alaVirtualRouterProfileMaxTlvs	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.4	Integer32	read-write	The maximum number of route-map TLVs supported in this VRF profile. TLVs are used to store match and set clauses.
STR alaVirtualRouterProfileName	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.1	SnmpAdminString	not-accessible	The name of the profile.
alaVirtualRouterProfileTable	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3		not-accessible	Table contains capabilities of a VRF profile.
INT alaVrConfigBgpStatus	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.5	INTEGER	read-write	Controls the load status of BGP on this router. Loaded(1) is the only valid Set value.
INT alaVrConfigDvmrpStatus	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.7	INTEGER	read-write	Controls the load status of DVMRP on this router. Loaded(1) is the only valid Set value.
alaVrConfigEntry	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1		not-accessible	Each entry exists for each VRF in the alaVrtualRouterNameTable. The entry represents the status of routing protocols on a VRF instance.
I32 alaVrConfigIndex	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.1	Integer32	not-accessible	The index associated with the Virtual Router name.
INT alaVrConfigIsisStatus	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.4	INTEGER	read-write	Controls the load status of ISIS on this router. Loaded(1) is the only valid Set value.
INT alaVrConfigMplsLdpStatus	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.10	INTEGER	read-only	Controls the load status of MPLS LDP on this router. Loaded(1) is the only valid Set value.
INT alaVrConfigOspf3Status	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.9	INTEGER	read-write	Controls the load status of OSPFv3 on this router. Loaded(1) is the only valid Set value.
INT alaVrConfigOspfStatus	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.3	INTEGER	read-write	Controls the load status of OSPF on this router. Loaded(1) is the only valid Set value.
INT alaVrConfigPimStatus	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.6	INTEGER	read-write	Controls the load status of PIM on this router. Loaded(1) is the only valid Set value.
INT alaVrConfigRipngStatus	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.8	INTEGER	read-write	Controls the load status of Ripng on this router. Loaded(1) is the only valid Set value.
INT alaVrConfigRipStatus	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.2	INTEGER	read-write	Controls the load status of RIP on this router. Loaded(1) is the only valid Set value.
alaVrConfigTable	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2		not-accessible	Table containing Virtual Router protocol configuration.
INT alaVrConfigVrrpStatus	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.11	INTEGER	read-write	Controls the load status of VRRP on this router. Loaded(1) is the only valid Set value.
alcatelIND1VirtualRouterMIB	1.3.6.1.4.1.6486.801.1.2.1.10.15.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of Virtual Router instances. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1VirtualRouterMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2.1
alcatelIND1VirtualRouterMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2
alcatelIND1VirtualRouterMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2.2
alcatelIND1VirtualRouterMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1

RFC description

Manages virtual router instances and inter-VR routing on Alcatel-Lucent 7x50 platforms.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-VIRTUALROUTER-MIB

What Is ALCATEL-IND1-VIRTUALROUTER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description