| OID symbolic | OID numeric | Type | Access | Description |
|---|
| alcatelIND1VRRPMIB | 1.3.6.1.4.1.6486.801.1.2.1.28.1 | | | This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary VRRP MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE |
| alcatelIND1VRRPMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1 | | | |
| alaVRRPConfig | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1 | | | |
| I32 alaVRRPStartDelay | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1.1 | Integer32 | read-write | Once VRRP's initial configuration is complete at startup, this
object specifies the number of seconds VRRP will delay before
leaving the initialize state. This delay is to allow external
protocols (spanning tree, OSPF, etc.) time to converge so that
when a VRRP virtual router becomes master it will be able to
forward traffic. |
| INT alaVrrpBfdStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1.2 | INTEGER | read-write | Enable or disable the BFD for VRRP. |
| alaVrrpTracking | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2 | | | |
| alaVrrpTrackTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1 | | not-accessible | VRRP Tracking Policy table, which consists of a sequence
(i.e., one or more conceptual rows) of 'vrrpTrackEntry' items. |
| alaVrrpTrackEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1 | | not-accessible | An entry in the vrrpTrackTable containing the operational
characteristics of a VRRP tracking policy.
Rows in the table cannot be modified unless the value
of `vrrpTrackAdminState' is `disabled'. |
| ALA alaVrrpTrackId | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.1 | AlaVrTrackId | not-accessible | This object contains the Tracking Policy Identifier (TRACKID). |
| INT alaVrrpTrackState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.2 | INTEGER | read-only | The conditional state of the tracking policy entity. |
| INT alaVrrpTrackAdminState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.3 | INTEGER | read-create | This object will enable/disable the tracking policy function. |
| INT alaVrrpTrackEntityType | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.4 | INTEGER | read-only | This object specifies the tracking policy entity type
currently in use. |
| NUM alaVrrpTrackEntityPort | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.6 | InterfaceIndexOrZero | read-create | This object contains the Tracking Policy Entity. A port
ifIndex or 0 if not significant.
The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface,
alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr
are mutually exclusive of one another. The last one set is
the valid one and identifies the entity type. |
| I32 alaVrrpTrackPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.8 | Integer32 | read-create | This object specifies the value by which the priority of virtual
routers associated with the tracking policy will be decremented
when the tracked entity's operational state transitions from up to
down, or will be incremented when the tracked entity's operational
state transitions from down to up. |
| ROW alaVrrpTrackRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.9 | RowStatus | read-create | The row status variable, used in accordance to installation
and removal conventions for conceptual rows.
To create a row in this table, a manager sets this object
to either createAndGo(4) or createAndWait(5). Until instances
of all corresponding columns are appropriately configured,
the value of the corresponding instance of the
`vrrpTrackRowStatus' column will be read as notReady(3).
In particular, a newly created row cannot be made active(1)
until (minimally) the corresponding instances of
`vrrpTrackId', and either one of : alaVrrpTrackEntityPort,
or alaVrrpTrackEntityInterface
have been set. |
| NUM alaVrrpTrackEntityInterface | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.10 | InterfaceIndexOrZero | read-create | This object contains the Tracking Policy Entity. An interface.
The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface,
alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr
are mutually exclusive of one another. The last one set is
the valid one and identifies the entity type. |
| NUM alaVrrpTrackEntityIpv6Interface | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.11 | InterfaceIndexOrZero | read-create | This object contains the Tracking Policy Entity. An Ipv6
interface.
The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface,
alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr
are mutually exclusive of one another. The last one set is
the valid one and identifies the entity type. |
| IPt alaVrrpTrackEntityIpAddrType | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.12 | InetAddressType | read-create | This object contains the Tracking Policy Entity IP Address
type. |
| IP alaVrrpTrackEntityIpAddr | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.13 | InetAddress | read-create | This object contains the Tracking Policy Entity. An
IPv4 for or IPv6 Address based on alaVrrpTrackEntityIpAddrType.
The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface,
alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr
are mutually exclusive of one another. The last one set is
the valid one and identifies the entity type. |
| INT alaVrrpTrackBfdStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.14 | INTEGER | read-create | Enables BFD for a VRRP track. |
| alaVrrpAssoTrackTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2 | | not-accessible | The table of tracking policies associated with this virtual router. |
| alaVrrpAssoTrackEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1 | | not-accessible | An entry in the table contains a tracking policy id that is
associated with a virtual router. The number of rows for
a given ifIndex and VrId will equal the number of tracking
policies associated with the virtual router (equivalent to alaVrrpTrackCount').
Rows in the table cannot be modified unless the value of
`vrrpOperAdminState' is `disabled' and the 'vrrpOperState' has transitioned to `initialize'. |
| ALA alaVrrpAssoTrackId | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1.1 | AlaVrTrackId | not-accessible | The identifier of the tracking policy the virtual router is
responsible for monitoring. |
| ROW alaVrrpAssoTrackRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1.2 | RowStatus | read-create | The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to active(1) or createAndGo(4) results in the
addition of an associated tracking policy for a virtual router.
Destroying the entry or setting it to notInService(2)
removes the associated tracking policy from the virtual router.
The use of other values is implementation-dependent. |
| alaVrrp3AssoTrackTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3 | | not-accessible | The table of tracking policies associated with this virtual router. |
| alaVrrp3AssoTrackEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1 | | not-accessible | An entry in the table contains a tracking policy id that is
associated with a virtual router. The number of rows for
a given IP Version, VrId, and ifIndex will equal the number of tracking
policies associated with the virtual router (equivalent to alaVrrp3TrackCount').
Rows in the table cannot be modified unless the value of
`alaVrrp3OperAdminState' is `disabled' and the 'alaVrrp3OperState' has transitioned to `initialize'. |
| ALA alaVrrp3AssoTrackId | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1.1 | AlaVrTrackId | not-accessible | The identifier of the tracking policy the virtual router is
responsible for monitoring. |
| ROW alaVrrp3AssoTrackRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1.2 | RowStatus | read-create | The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to active(1) or createAndGo(4) results in the
addition of an associated tracking policy for a virtual router.
Destroying the entry or setting it to notInService(2)
removes the associated tracking policy from the virtual router.
The use of other values is implementation-dependent. |
| alaVrrpOperations | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3 | | | |
| alaVrrpOperTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1 | | not-accessible | Table of virtual router configuration info. |
| alaVrrpOperEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1 | | not-accessible | An entry in the table, config information
about a given virtual router. |
| I32 alaVrrpCurrentPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.1 | Integer32 | read-only | This object specifies the priority currently used for the
virtual router master election process. Higher values imply
higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has ceased
to participate in VRRP and a backup virtual router should
transition to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es). |
| I32 alaVrrpTrackCount | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.2 | Integer32 | read-only | The number of tracking policies associated with a virtual router. |
| I32 alaVrrpGroupIdent | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.3 | Integer32 | read-only | The VRRP group to which this virtual router belongs. A value of
zero indicates that the virtual router is not affiliated with any group. |
| alaVrrp3OperExTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2 | | not-accessible | Table of virtual router configuration info. |
| alaVrrp3OperExEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1 | | not-accessible | An entry in the table, config information
about a given virtual router. |
| I32 alaVrrp3CurrentPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.1 | Integer32 | read-only | This object specifies the priority currently used for the
virtual router master election process. Higher values imply
higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has ceased
to participate in VRRP and a backup virtual router should
transition to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es). |
| I32 alaVrrp3TrackCount | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.2 | Integer32 | read-only | The number of tracking policies associated with a virtual router. |
| I32 alaVrrp3GroupIdent | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.3 | Integer32 | read-only | The VRRP group to which this virtual router belongs. A value of
zero indicates that the virtual router is not affiliated with any group. |
| alaVRRPv2Config | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4 | | | |
| I32 alaVRRPDefaultInterval | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.1 | Integer32 | read-write | The VRRP Router default time interval, in seconds, between
sending advertisement messages. |
| I32 alaVRRPDefaultPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.2 | Integer32 | read-write | This object specifies the VRRP Router default priority to be used for the
virtual router master election process. Higher values imply
higher priority. |
| T/F alaVRRPDefaultPreemptMode | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.3 | TruthValue | read-write | The VRRP Router default preempt mode. Controls whether a higher
priority virtual router will preempt a lower priority master. |
| INT alaVRRPAdminState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.4 | INTEGER | read-write | This object is used to force a change in to the vrrpOperAdminState
of virtual routers in the vrrpOperTable. Setting a value of allEnable will
cause the vrrpOperAdminState of each entry in the table to be set to up.
Setting a value of enable will set the vrrpOperAdminState to up but
only for the set of virtual routers whose vrrpOperAdminState was down
by default (as occurs when the virtual router instance is created) or due
to a previous set command of the alaVRRPAdminState to disable.
Setting a value of disable will cause the vrrpOperAdminState of each
entry in the table to be set to down.
This object is of little value when read but will return the last value
to which it was set. |
| INT alaVRRPSetParam | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.5 | INTEGER | read-write | This object is used to force the virtual routers in the vrrpOperTable
to revert to the default parameter values specified in
alaVRRPDefaultInterval, alaVRRPDefaultPriority, and
alaVRRPDefaultPreemptMode. Unless alaVRRPOverride is set to true only
virtual routers previously configured with default parameter values
are modified. Parameters can be modified individually with the
interval, priority, and preempt values, or collectively with the all
value.
This object is of little value when read but will return the last value
to which it was set. |
| T/F alaVRRPOverride | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.6 | TruthValue | read-write | This object is used in combination with the alaVRRPSetParam object
to force all virtual routers in the vrrpOperTable to revert to the default
values specified in alaVRRPDefaultInterval, alaVRRPDefaultPriority,
and alaVRRPDefaultPreemptMode.
This object is of little value when read but will return the last value
to which it was set. |
| alaVrrpGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5 | | | |
| alaVrrpGroupTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1 | | not-accessible | VRRP Group table, which consists of a sequence (i.e., one
or more conceptual rows) of 'vrrpGroupEntry' items. |
| alaVrrpGroupEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1 | | not-accessible | An entry in the vrrpGroupTable containing the
characteristics of a VRRP group. |
| ALA alaVrrpGroupId | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.1 | AlaVrGroupId | not-accessible | This object contains the Tracking Policy Identifier (GROUPID). |
| I32 alaVrrpGroupInterval | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.2 | Integer32 | read-create | The VRRP Group time interval, in seconds, between
sending advertisement messages. |
| I32 alaVrrpGroupPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.3 | Integer32 | read-create | This object specifies the VRRP Group priority to be used for the
virtual router master election process. Higher values imply
higher priority. |
| T/F alaVrrpGroupPreemptMode | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.4 | TruthValue | read-create | The VRRP Group preempt mode. Controls whether a higher
priority virtual router will preempt a lower priority master. |
| INT alaVrrpGroupAdminState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.5 | INTEGER | read-create | This object is used to force a change in to the vrrpOperAdminState
of virtual routers in the corresponding alaVRRPAssoGroupTable
entry. Setting a value of allEnable will cause the vrrpOperAdminState
of each vrrpOperEntry to be set to up. Setting a value of enable will
set the vrrpOperAdminState to up but only for the set of virtual routers
in the group whose vrrpOperAdminState was down by default (as
occurs when the virtual router instance is created) or due to a previous
set command of the alaVrrpGroupAdminState or alaVRRPAdminState
to disable. Setting a value of disable will cause the vrrpOperAdminState
of each entry in the table to be set to down.
This object is of little value when read but will return the last value
to which it was set. |
| INT alaVrrpGroupSetParam | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.6 | INTEGER | read-create | This object is used to force the virtual routers in the corresponding
alaVRRPAssoGroupTable to revert to the group parameter values
specified in alaVrrpGroupInterval, alaVrrpGroupPriority,
and alaVrrpGroupPreemptMode. Unless alaVrrpGroupOverride is set to
true only virtual routers previously configured with default
or group parameter values are modified. Parameters can be modified
individually with the interval, priority, and preempt values, or
collectively with the all value.
This object is of little value when read but will return the last value
to which it was set. |
| T/F alaVrrpGroupOverride | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.7 | TruthValue | read-create | This object is used in combination with the alaVrrpGroupSetParam object
to force all virtual routers in the corresponding alaVrrpAssoGroupTable
to revert to the group parameter values specified in alaVrrpGroupInterval,
alaVrrpGroupPriority, and alaVrrpGroupPreemptMode.
This object is of little value when read but will return the last value
to which it was set. |
| ROW alaVrrpGroupRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.8 | RowStatus | read-create | The row status variable, used in accordance to installation
and removal conventions for conceptual rows.
To create a row in this table, a manager sets this object
to either createAndGo(4) or createAndWait(5). Until instances
of all corresponding columns are appropriately configured,
the value of the corresponding instance of the
`alaVrrpGroupRowStatus' column will be read as notReady(3).
In particular, a newly created row cannot be made active(1)
until (minimally) the corresponding instance of `alaVrrpGroupId'
has been set. |
| alaVrrpAssoGroupTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2 | | not-accessible | The table of virtual routers associated with this group. |
| alaVrrpAssoGroupEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2.1 | | not-accessible | An entry in the table contains a virtual router id that is
associated with a virtual router group. |
| ROW alaVrrpAssoGroupRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2.1.1 | RowStatus | read-create | The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to active(1) or createAndGo(4) results in the
addition of an associated virtual router for a group.
Destroying the entry or setting it to notInService(2)
removes the associated virtual router from the group.
The use of other values is implementation-dependent. |
| alcatelIND1VRRPMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2 | | | |
| alcatelIND1VRRPMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.1 | | | |
| alaVRRPCompliance | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.1.1 | | | The compliance statement for switches with Alcatel VRRP and
implementing ALCATEL-IND1-VRRP-MIB. |
| alcatelIND1VRRPMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2 | | | |
| alaVRRPConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.1 | | | A collection of objects to support management of Alcatel VRRP. |
| alaVRRPv2ConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.2 | | | A collection of objects to support management of Alcatel VRRP |
| alaVrrp3AssoTrackTableGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.3 | | | The table of tracking policies associated with this virtual router. |
| alaVrrp3OperExEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.4 | | | Table of virtual router configuration info. |
| alaVrrpAssoGroupEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.5 | | | The table of virtual routers associated with this group. |
| alaVrrpAssoTrackEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.6 | | | The table of tracking policies associated with this virtual router. |
| alaVrrpOperEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.7 | | | Config information about a given virtual router. |
| alaVrrpGroupTableGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.8 | | | VRRP Group table objects with attributes of VRRP Group. |
| alaVrrpTrackGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.9 | | | VRRP Tracking Policy objects. |
