All MIBs › ACD-SHAPER-V2-MIB
Organization: Accedian Networks, Inc.
Last Updated: 2016-09-23
Category: Vendor: Accedian
Description: Provides an updated version of the Accedian MetroNID traffic shaper MIB with enhanced queue management and shaping policy objects.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ACD-SHAPER-V2-MIB?
ACD-SHAPER-V2-MIB is a vendor-specific MIB from Accedian Networks defining the second-generation traffic-shaping engine on its MetroNID Ethernet performance devices, covering per-queue shaping policy and statistics. It exposes queue-level identification (acdShaperV2QueueStatsQueueId, acdShaperV2QueueStatsQueueName) along with detailed color-aware traffic counters distinguishing green/yellow, delayed/non-delayed forwarded frames and bytes. This is primarily a performance-counter and traffic-conformance monitoring MIB: it lets an operator verify whether traffic is being shaped/policed as configured and whether excess (yellow) traffic is being delayed or forwarded, which is a software/queueing-engine health indicator rather than a physical hardware sensor. It is part of the Accedian MetroNID MIB family and works alongside other Accedian MIBs (e.g., alarms) that can raise notifications (acdShaperV2Notifications) tied to shaper conditions. Typical deployment is on Accedian MetroNID Ethernet demarcation/NID devices used by carriers to enforce SLA-based bandwidth shaping at the service edge. Network engineers evaluating or troubleshooting this functionality can download the ACD-SHAPER-V2-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ACD-SHAPER-V2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Accedian MetroNID Ethernet demarcation device
Monitoring Examples
An operator would poll acdShaperV2QueueStatsTable / acdShaperV2QueueStatsEntry per acdShaperV2QueueStatsQueueId to compare acdShaperV2QueueStatsCntGreenForwardNoDelayFrames against acdShaperV2QueueStatsCntYellowForwardWithDelayFrames, revealing whether traffic within contract (green) flows freely while excess (yellow) traffic is being delayed as intended. A sudden rise in yellow-forward-with-delay byte counts on a given acdShaperV2QueueStatsQueueName would indicate the queue is regularly exceeding its committed rate. Sustained anomalies could also trigger acdShaperV2Notifications for operational alerting.
What Can Be Monitored
- per-queue shaping statistics
- green/yellow traffic classification counts
- delayed vs non-delayed forwarded frames/bytes
- queue identification/name
- shaper notifications
Imported Objects
From ACCEDIAN-SMI
| acdMibs | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString |
How to Use in IPNetwork Monitor
Example using acdShaperV2QueueStatsCntGreenForwardNoDelayFrames OID:
OIDs
RFC description
Accedian Shaper-V2 traffic shaping MIB for managing queue statistics and traffic regulation.
Start monitoring Accedian MetroNID devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.