All MIBs › ZXR10-LLDP-MIB › lldpPortTransparentEnable
lldpPortTransparentEnable
Module: ZXR10-LLDP-MIB
OID (symbolic): ZXR10-LLDP-MIB::lldpPortTransparentEnable
OID (numeric): 1.3.6.1.4.1.3902.3.6000.504.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The lldpPortTransparentEnable controls, on a per port basis, whether or not the received packets are fowarded. The value true(1) means that the port will foward the received packets; the value disable(2) means that the port will not foward the received packets. It is used in the area of switch, not in the area of router. It is reserved for compatibility.
What is lldpPortTransparentEnable?
This object controls, per port, whether received LLDP packets are forwarded onward rather than being consumed locally by the LLDP agent, applicable in switch deployments and reserved for compatibility rather than router use. Admins would enable forwarding on a port acting as a Layer 2 pass-through where LLDP frames from downstream devices need to reach an upstream collector unmodified. For example, setting this to enable(1) on a transparent-bridging port lets LLDP frames received from a connected device pass through to the next hop instead of being terminated at this switch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.504.2.1.1.3 snmpwalk -v2c -c public <target> ZXR10-LLDP-MIB::lldpPortTransparentEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.504.2.1.1.3.1 snmpget -v2c -c public <target> ZXR10-LLDP-MIB::lldpPortTransparentEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.6000.504.2.1.1.3.1 i <value>
Start monitoring ZTE ZXR10 carrier routers/switches (LLDP global/per-port admin-status config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-LLDP-MIB::lldpPortTransparentEnable OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 carrier routers/switches (LLDP global/per-port admin-status config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.6000 | zxr10RosngMIB | MR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.504 | zxr10LldpMIB | ZXR10-LLDP-MIB |
| 1.3.6.1.4.1.3902.3.6000.504.2 | zxr10LldpObjects | ZXR10-LLDP-MIB |
| 1.3.6.1.4.1.3902.3.6000.504.2.1 | zxr10LldpPortCfgTable | ZXR10-LLDP-MIB |
| 1.3.6.1.4.1.3902.3.6000.504.2.1.1 | zxr10LldpPortCfgEntry | ZXR10-LLDP-MIB |
| 1.3.6.1.4.1.3902.3.6000.504.2.1.1.3 | lldpPortTransparentEnable | ZXR10-LLDP-MIB |