All MIBs › ZXR10-LLDP-MIB › lldpGlbAdminStatus
lldpGlbAdminStatus
Module: ZXR10-LLDP-MIB
OID (symbolic): ZXR10-LLDP-MIB::lldpGlbAdminStatus
OID (numeric): 1.3.6.1.4.1.3902.3.6000.504.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The administratively desired status of the local LLDP agent.
If the associated lldpGlbAdminStatus object has a value of 'txOnly(1)', then LLDP agent can transmit LLDP frames on all ports and it will not store any information about the remote systems connected.
If the associated lldpGlbAdminStatus object has a value of 'rxOnly(2)', then the LLDP agent can receive, but it will not transmit LLDP frames on all ports.
If the associated lldpGlbAdminStatus object has a value of 'txAndRx(3)', then the LLDP agent can transmit and receive LLDP frames on all ports.
If the associated lldpGlbAdminStatus object has a value of 'disabled(4)', then LLDP agent will not transmit or receive LLDP frames on all ports. If there is remote systems information which is received and stored, before lldpGlbAdminStatus becomes disabled, then the information will naturally age out.
What is lldpGlbAdminStatus?
This object sets the global administrative mode of the local LLDP agent, choosing between txOnly, rxOnly, txAndRx, or fully disabled operation across all ports. Admins use this to control whether the device advertises itself via LLDP, listens for neighbor advertisements, both, or neither, which affects whether neighbor discovery (used by tools like topology maps and cabling verification) works at all. For example, setting this to disabled(4) stops the switch from transmitting or receiving LLDP frames on any port, and any previously learned neighbor information will age out over time.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.504.1.5 snmpwalk -v2c -c public <target> ZXR10-LLDP-MIB::lldpGlbAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.504.1.5.1 snmpget -v2c -c public <target> ZXR10-LLDP-MIB::lldpGlbAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.6000.504.1.5.1 i <value>
Start monitoring ZTE ZXR10 carrier routers/switches (LLDP global/per-port admin-status config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-LLDP-MIB::lldpGlbAdminStatus OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 carrier routers/switches (LLDP global/per-port admin-status config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.6000 | zxr10RosngMIB | MR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.504 | zxr10LldpMIB | ZXR10-LLDP-MIB |
| 1.3.6.1.4.1.3902.3.6000.504.1 | zxr10LldpGlobalObjects | ZXR10-LLDP-MIB |
| 1.3.6.1.4.1.3902.3.6000.504.1.5 | lldpGlbAdminStatus | ZXR10-LLDP-MIB |