ZXR10-LLDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Unsigned32, enterprises FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF; zxr10LldpMIB MODULE-IDENTITY LAST-UPDATED "201511200000Z" ORGANIZATION "ZTE Corporation" CONTACT-INFO " Geng chunjing Tel : +86-25-52870000 E-Mail: geng.chunjing@zte.com.cn " DESCRIPTION "The MIB module to describe part of LLDP protocol data. Include some new variable in 802.1AB-2009 compared with 802.1AB-2005 and some private variable used when the protocol is completed." REVISION "201511200000Z"--2015-11-20 00:00 DESCRIPTION "Modify the value range of lldpPortMaxNeighbor and lldpMaxNeighbor." REVISION "201311110000Z"--2013-11-11 00:00 DESCRIPTION "Modify the DESCRIPTION of lldpPortTransparentEnable. Add the description of using" REVISION "201306250000Z"--2013-6-25 00:00 DESCRIPTION "Modify the SYNTAX of lldpV2TxCreditMax. From Unsigned32(1..100) to Unsigned32(1..10)." REVISION "201304100000Z"--2013-4-10 00:00 DESCRIPTION "Add object lldpGlbAdminStatus." REVISION "201304010000Z"--2013-4-1 00:00 DESCRIPTION "Initial version of this MIB module." ::= { zxr10RosngMIB 504 } zte OBJECT IDENTIFIER ::= { enterprises 3902 } zxr10 OBJECT IDENTIFIER ::= { zte 3 } zxr10RosngMIB OBJECT IDENTIFIER ::= { zxr10 6000} zxr10LldpGlobalObjects OBJECT IDENTIFIER ::= { zxr10LldpMIB 1 } zxr10LldpObjects OBJECT IDENTIFIER ::= { zxr10LldpMIB 2 } zxr10LldpNotifications OBJECT IDENTIFIER ::= { zxr10LldpMIB 3 } zxr10LldpConformance OBJECT IDENTIFIER ::= { zxr10LldpMIB 4 } --======================================================================= --1. zxr10LldpGlobalObjects --======================================================================= lldpV2MessageFastTx OBJECT-TYPE SYNTAX Unsigned32(1..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval at which LLDP frames are transmitted on behalf of this LLDP agent during fast transmission period (e.g. when a new neighbor is detected). The default value for lldpV2MessageFastTx object is 1 second. The value of this object is restored from non-volatile storage after a re-initialization of the management system." REFERENCE "9.2.5.5 802.1AB-2009" DEFVAL { 1 } ::= { zxr10LldpGlobalObjects 1 } lldpV2TxCreditMax OBJECT-TYPE SYNTAX Unsigned32(1..10) UNITS "PDUs" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of consecutive LLDPDUs that can be transmitted at any time. The default value for lldpV2TxCreditMax object is 5 PDUs. The value of this object is restored from non-volatile storage after a re-initialization of the management system." REFERENCE "9.2.5.17 802.1AB-2009" DEFVAL { 5 } ::= { zxr10LldpGlobalObjects 2 } lldpV2TxFastInit OBJECT-TYPE SYNTAX Unsigned32(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The initial value used to initialize the txFast variable which determines the number of transmissions that are made in fast transmission mode. The default value for lldpV2TxFastInit object is 4. The value of this object is restored from non-volatile storage after a re-initialization of the management system." REFERENCE "9.2.5.19 802.1AB-2009" DEFVAL { 4 } ::= { zxr10LldpGlobalObjects 3 } lldpMaxNeighbor OBJECT-TYPE SYNTAX Unsigned32(1..2000) MAX-ACCESS read-write STATUS current DESCRIPTION "The Max number of the neighbor to save. The default value for lldpMaxNeighbor object is configured by performance parameter of different projects." REFERENCE "10.3.4 802.1AB-2005" DEFVAL { 128 } ::= { zxr10LldpGlobalObjects 4 } lldpGlbAdminStatus OBJECT-TYPE SYNTAX INTEGER { txOnly(1), rxOnly(2), txAndRx(3), disabled(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively desired status of the local LLDP agent. If the associated lldpGlbAdminStatus object has a value of 'txOnly(1)', then LLDP agent can transmit LLDP frames on all ports and it will not store any information about the remote systems connected. If the associated lldpGlbAdminStatus object has a value of 'rxOnly(2)', then the LLDP agent can receive, but it will not transmit LLDP frames on all ports. If the associated lldpGlbAdminStatus object has a value of 'txAndRx(3)', then the LLDP agent can transmit and receive LLDP frames on all ports. If the associated lldpGlbAdminStatus object has a value of 'disabled(4)', then LLDP agent will not transmit or receive LLDP frames on all ports. If there is remote systems information which is received and stored, before lldpGlbAdminStatus becomes disabled, then the information will naturally age out." DEFVAL { txAndRx } ::= { zxr10LldpGlobalObjects 5 } --======================================================================= --2. zxr10LldpPortCfgTable --======================================================================= zxr10LldpPortCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10LldpPortCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table that controls LLDP private config on individual ports. " REFERENCE "802.1Qau clause 32.2.4" ::= { zxr10LldpObjects 1 } zxr10LldpPortCfgEntry OBJECT-TYPE SYNTAX Zxr10LldpPortCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Part of LLDP configuration information for a particular port. This configuration parameter controls the maxnum neighbor the port can save and whether or not the received. " INDEX { lldpPortCfgPortIndex } ::= { zxr10LldpPortCfgTable 1 } Zxr10LldpPortCfgEntry ::= SEQUENCE { lldpPortCfgPortIndex Unsigned32, lldpPortMaxNeighbor Unsigned32, lldpPortTransparentEnable INTEGER } lldpPortCfgPortIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the zxr10LldpPortCfgTable." ::= { zxr10LldpPortCfgEntry 1 } lldpPortMaxNeighbor OBJECT-TYPE SYNTAX Unsigned32(1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "The Max number of the neighbor is configured by performance parameter of different projects. The default value for lldpPortMaxNeighbor object is 8." REFERENCE "10.3.4 802.1AB-2005" DEFVAL { 8 } ::= { zxr10LldpPortCfgEntry 2 } lldpPortTransparentEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The lldpPortTransparentEnable controls, on a per port basis, whether or not the received packets are fowarded. The value true(1) means that the port will foward the received packets; the value disable(2) means that the port will not foward the received packets. It is used in the area of switch, not in the area of router. It is reserved for compatibility." DEFVAL { disable } ::= { zxr10LldpPortCfgEntry 3 } --======================================================================= --3. zxr10LldpNotifications --======================================================================= --======================================================================= --4. zxr10LldpNotifications --======================================================================= END