XEDIA-SYSTEM-MIB

All MIBs › XEDIA-SYSTEM-MIB

Organization: Xedia Corp.

Last Updated: 1997-04-02

Description: General system management objects including configuration, notifications, and file-transfer controls for Xedia router and access devices

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XEDIA-SYSTEM-MIB?

XEDIA-SYSTEM-MIB is a Xedia Corporation proprietary MIB reporting general system status and managing boot-image configuration on Xedia routers. Its objects cover current date/time, operational status, reset control, next-boot diagnostics level and last-boot diagnostics code/type, reset count, login-prompt disable flag, compact-flash presence, running image name/version/build date, and a boot-image table (index, boot priority, source location/name/type, destination name, server/local address, mask, default router, and slot). As a hardware/software-status MIB it lets an administrator confirm the running image version and audit boot-image priority order before a scheduled reboot. It is deployed on Xedia Corporation routers. Engineers can download the XEDIA-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in XEDIA-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Xedia Corporation routers

Monitoring Examples

An administrator checks xsysBootImageBootPriority across the boot-image table to confirm the intended firmware image will load first, before triggering xsysResetControl for a scheduled reboot.

What Can Be Monitored

running image version
boot-image configuration and priority

Imported Objects

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

From XEDIA-REG

xediaMibs

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using xsysNumResets OID:

Select a Xedia Corporation router (boot-image priority/running-image-version status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type xsysNumResets into the Find box to locate it in the OID tree, then select it and click OK. It reports a count of the number of times the system has been reset either via a hardware switch, via the software xsysResetControl object, or via any other means (cable seeking backhoe, software spasm, etc.) Note that a manager can use this object to. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
xediaSystemMIB	1.3.6.1.4.1.838.3.1			This module defines objects for management of Xedia devices.
xsysObjects	1.3.6.1.4.1.838.3.1.1
xsysGeneral	1.3.6.1.4.1.838.3.1.1.1
DAT xsysDateTime	1.3.6.1.4.1.838.3.1.1.1.1	DateAndTimeForm	read-write	The current date and time of the system. Note that this can also be used to set the current date and time as well as read it.
INT xsysOperStatus	1.3.6.1.4.1.838.3.1.1.1.2	INTEGER	read-only	The current operational status of the system as a whole. A value 'unknown(1)' indicates that the current state of the system could not be determined. The value 'running(2)' indicates that the system is up and running and that no unusual error conditions are known. The 'warning(3)' state indicates that agent has been informed of an unusual error condition by the operational software (e.g., a device driver) but that the system is still 'operational'. (The xsysBootDiagsCode object may provide more information.) A value of 'testing(4)', indicates that the system is not available for use because it is in the testing state. The state of 'down(5)' is used only when the agent has been informed that the system is not available for any use. (How it can tell you it's down is an interesting question.)
INT xsysResetControl	1.3.6.1.4.1.838.3.1.1.1.3	INTEGER	read-write	This is the 'software reset button' of the agent. When read, this object always returns the value 'ready(1)'. When set to 'reset(2)', the system will reset and reload its configuration from NVRAM. When set to 'resetToDefaults(3)', the system will delete its configuration parameters and then reset, which will cause it to come up with its default configuration.
INT xsysNextBootDiagsLevel	1.3.6.1.4.1.838.3.1.1.1.4	INTEGER	read-write	The level of diagnostic tests to run the next time the system is reset. Setting the value 'none(1)' skips all diagnostic tests (and therefore makes the system boot faster). The value 'normal(2)' (the default) runs the basic set of diagnostic teams. The value 'full(3)' runs a greater-than-normal set of tests that may be useful to diagnose unusual hardware failures.
I32 xsysBootDiagsCode	1.3.6.1.4.1.838.3.1.1.1.5	Integer32	read-only	An error code giving more detail about a boot diagnostics failure indicated by xsysOperStatus 'warning(3)' or 'down(5)'. The value 0 indicates no failure detected or an unknown failure type. See the product user's guide for interpretation of the error code.
INT xsysLastBootType	1.3.6.1.4.1.838.3.1.1.1.6	INTEGER	read-only	An indication of type of the last system boot. The value 'warmBoot(2)' indicates the system was reset by software (e.g., via the xsysResetControl object). The value 'coldBoot(3)' indicates the system was reset via a hardware reset button or power cycle.
C32 xsysNumResetsEx	1.3.6.1.4.1.838.3.1.1.1.7	Counter32	read-only	A count of the number of times the system has been reset either via a hardware switch, via the software xsysResetControl object, or via any other means (cable seeking backhoe, software spasm, etc.) Note that a manager can use this object to determine if it has missed any warmStart or coldStart traps and to detect counter discontinuities.
T/F xsysDisableLoginPrompt	1.3.6.1.4.1.838.3.1.1.1.8	TruthValue	read-write	Setting this object to the value 'true(1)' will disable the login prompt so that users of the Command Line Interface (CLI) automatically get admin permissions.
xsysFile	1.3.6.1.4.1.838.3.1.1.1.9
INT xsysCompactFlash	1.3.6.1.4.1.838.3.1.1.1.9.1	INTEGER	read-write	This is the command to compact Flash memory to regain space. To begin a compact, set the object to 'compact'. When read, this object will return the appropriate status. The status 'ready' is returned when a compact is possible, 'compactInProgress' is returned when there is an unfinished compact still running, and 'flashNotAvailable' is returned if another system is currently manipulating the flash.
xsysRunningImageInfo	1.3.6.1.4.1.838.3.1.1.1.9.2
STR xsysRunningImageName	1.3.6.1.4.1.838.3.1.1.1.9.2.1	DisplayString	read-only	The software name for the currently running software image.
STR xsysRunningImageVersion	1.3.6.1.4.1.838.3.1.1.1.9.2.2	DisplayString	read-only	The running image version.
STR xsysRunningImageBuildDate	1.3.6.1.4.1.838.3.1.1.1.9.2.3	DisplayString	read-only	The running image build date.
xsysBootImageTable	1.3.6.1.4.1.838.3.1.1.1.9.3		not-accessible	A table of 'boot files' (either real or virtual) that can be used.
xsysBootImageEntry	1.3.6.1.4.1.838.3.1.1.1.9.3.1		not-accessible	Information about a single Boot Image
INT xsysBootImageIndex	1.3.6.1.4.1.838.3.1.1.1.9.3.1.1	INTEGER	not-accessible	The index of the table.
U32 xsysBootImageBootPriority	1.3.6.1.4.1.838.3.1.1.1.9.3.1.2	Unsigned32	read-create	The boot priority for a given entry. Lowest is highest priority.
XST xsysBootImageSrc	1.3.6.1.4.1.838.3.1.1.1.9.3.1.3	XStorageType	read-create	The source of the file to transfer. The only valid selection is Network or Flash.
STR xsysBootImageSrcName	1.3.6.1.4.1.838.3.1.1.1.9.3.1.4	DisplayString	read-create	The name of the source file to be transfered.
XFI xsysBootImageSrcType	1.3.6.1.4.1.838.3.1.1.1.9.3.1.5	XFileType	read-only	The type of file represented by the file source name.
STR xsysBootImageDestName	1.3.6.1.4.1.838.3.1.1.1.9.3.1.6	DisplayString	read-create	The local name of the destination file.
IP xsysBootImageServerAddr	1.3.6.1.4.1.838.3.1.1.1.9.3.1.7	IpAddress	read-create	The IP address of the remote TFTP server.
IP xsysBootImageLocalAddr	1.3.6.1.4.1.838.3.1.1.1.9.3.1.8	IpAddress	read-create	The local IP address used during a boot TFTP.
IP xsysBootImageMask	1.3.6.1.4.1.838.3.1.1.1.9.3.1.9	IpAddress	read-create	The IP address mask used during a boot TFTP.
IP xsysBootImageDefaultRouter	1.3.6.1.4.1.838.3.1.1.1.9.3.1.10	IpAddress	read-create	The IP address for the default router used during a boot TFTP.
U32 xsysBootImageSlot	1.3.6.1.4.1.838.3.1.1.1.9.3.1.11	Unsigned32	read-create	The internal slot (slot/port) used during a boot TFTP.
U32 xsysBootImagePort	1.3.6.1.4.1.838.3.1.1.1.9.3.1.12	Unsigned32	read-create	The internal port (slot/port) used during a boot TFTP.
XTR xsysBootImageOperStatus	1.3.6.1.4.1.838.3.1.1.1.9.3.1.13	XTransferStatus	read-only	The status of the last boot image transfer.
ROW xsysBootImageRowStatus	1.3.6.1.4.1.838.3.1.1.1.9.3.1.14	RowStatus	read-create	This object is used to add and remove entries from the table.
xsysTransferTable	1.3.6.1.4.1.838.3.1.1.1.9.4		not-accessible	A table of 'files' (either real or virtual) that can be transfered.
xsysTransferEntry	1.3.6.1.4.1.838.3.1.1.1.9.4.1		not-accessible	Information about a single 'file' that can be transfered. The file may be in an actual file system or it may be a virtual file that exists only in memory, perhaps in a different format than it will have once it is transfered. For example, the eventLog may be stored as a linked list of data structures in RAM on the local system but uploaded in human-readable ASCII to the remote system. This table will be initialized to contain entries for the types of files it allows transfer of, though these entries will return the value 'notReady(3)' for their xsysTransferRowStatus column until the user provides values for any required columns. The agent may also not allow these entries to be deleted from the table. (Therefore, for agents that only support transfer of a fixed number of 'files', this can be implemented as a fixed length table.) Legal Transfers Matrix: SRC network flash nvram ram D network N Y (1) Y (1) Y (2) E flash Y (3) N Y (4) N S nvram Y (5) Y (6) N N T ram Y (7) Y (7) N N (1) this is how you back up config files to the network (2) done by dumper automatically when crash occurs (3) this is how you upgrade software from network (4) this is how you backup config locally (5) this is how you restore config from network (6) this is how you restore config locally (7) done by loader automatically during boot
U32 xsysTransferIndex	1.3.6.1.4.1.838.3.1.1.1.9.4.1.1	Unsigned32	not-accessible	Indicates the row entry number within the table.
XST xsysTransferSrc	1.3.6.1.4.1.838.3.1.1.1.9.4.1.2	XStorageType	read-create	The source of the file to transfer.
STR xsysTransferSrcName	1.3.6.1.4.1.838.3.1.1.1.9.4.1.3	DisplayString	read-create	The file name of the source file.
XST xsysTransferDest	1.3.6.1.4.1.838.3.1.1.1.9.4.1.4	XStorageType	read-create	The destination for the file to transfer.
STR xsysTransferDestName	1.3.6.1.4.1.838.3.1.1.1.9.4.1.5	DisplayString	read-create	The file name of the destination file.
IP xsysTransferServerAddr	1.3.6.1.4.1.838.3.1.1.1.9.4.1.6	IpAddress	read-create	The IP address of the the TFTP server.
XTR xsysTransferOperStatus	1.3.6.1.4.1.838.3.1.1.1.9.4.1.7	XTransferStatus	read-only	The status of the last transfer procedure, if any. This object will have a value of 'statusUnknown(2)' if no transfer process has been performed. The 'incompatibleFile(6)' may result, for example, if the file is a software image that is not compatible with this hardware, or, as another example, if the file contains configuration parameters for a newer revision of software than is currently running on the system. The other values should be self-explanatory.
INT xsysTransferOperProgress	1.3.6.1.4.1.838.3.1.1.1.9.4.1.8	INTEGER	read-only	A percent value updated periodically to represent the progress of a TFTP session.
INT xsysTransferAction	1.3.6.1.4.1.838.3.1.1.1.9.4.1.9	INTEGER	read-create	The object is used to initiate the transfer manually. When read, it always returns the value 'ready(1)'. Setting the object to 'execute(2)' initiates the transfer as long as the xsysTransferRowStatus is 'active(1)' and another transfer is not currently in progress. The 'executeAndCreateBootRecord(3)' additionally creates a BootImageEntry if the transfer is of an OS image into flash. If the BootImageTable is full, the file transfer will fail. The newly created BootImageEntry will be initialized with the lowest priority and RowStatus of notInService. The value 'abort(3)' attempts to abort the transfer and will return a inconsistentValue SNMP error when set if the xsysTransferOperStatus is not currently 'inProgress(1)'. The action 'secureTransfer' is similar to the 'execute' action except it can only be used for configuration files when the source or destination is nvram. SecureTransfer uses authentication and encryption to protect the configuration file from modification, and from interception.
ROW xsysTransferRowStatus	1.3.6.1.4.1.838.3.1.1.1.9.4.1.10	RowStatus	read-create	This object is used to add and remove entries from the table.
STR xsysTransferEncryptPassword	1.3.6.1.4.1.838.3.1.1.1.9.4.1.11	DisplayString	read-create	The password used for en/decryption.
xsysStorageTable	1.3.6.1.4.1.838.3.1.1.1.9.5		not-accessible	A table of storage devices. Note that this table parallels the one in the Host Resources MIB.
xsysStorageEntry	1.3.6.1.4.1.838.3.1.1.1.9.5.1		not-accessible	Information about the capacity and utilization of a storage device. The Xedia Velociraptor 1.0.0 product will have entries of type ram, nvram, and flash.
XST xsysStorageArea	1.3.6.1.4.1.838.3.1.1.1.9.5.1.2	XStorageType	not-accessible	The type of storage represented by this entry. Note that the value 'network(1)' cannot be used in this context.
STR xsysStorageDescr	1.3.6.1.4.1.838.3.1.1.1.9.5.1.3	DisplayString	read-only	A textual description of this storage device.
U32 xsysStorageAllocationUnits	1.3.6.1.4.1.838.3.1.1.1.9.5.1.4	Unsigned32	read-only	The size, in bytes, that xsysStorageSize and xsysStorageUsed is measured in.
U32 xsysStorageSize	1.3.6.1.4.1.838.3.1.1.1.9.5.1.5	Unsigned32	read-only	The size of the storage device in the units identified by xsysStorageAllocationUnits.
U32 xsysStorageUsed	1.3.6.1.4.1.838.3.1.1.1.9.5.1.6	Unsigned32	read-only	The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.
C32 xsysStorageAllocationFailures	1.3.6.1.4.1.838.3.1.1.1.9.5.1.7	Counter32	read-only	The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a SYNTAX of Counter32, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero.
U32 xsysStorageBytesTotal	1.3.6.1.4.1.838.3.1.1.1.9.5.1.8	Unsigned32	read-only	The size of the storage device in bytes.
U32 xsysStorageBytesUsed	1.3.6.1.4.1.838.3.1.1.1.9.5.1.9	Unsigned32	read-only	The amount of the storage represented by this entry that is allocated, in bytes.
U32 xsysStorageBytesAvailable	1.3.6.1.4.1.838.3.1.1.1.9.5.1.10	Unsigned32	read-only	The amount of the storage represented by this entry that is not allocated, in bytes.
xsysFileListTable	1.3.6.1.4.1.838.3.1.1.1.9.6		not-accessible	A table of File List entries.
xsysFileListEntry	1.3.6.1.4.1.838.3.1.1.1.9.6.1		not-accessible	Information about the files on the system.
STR xsysFileName	1.3.6.1.4.1.838.3.1.1.1.9.6.1.1	DisplayString	read-only	A textual name of the file.
XFI xsysFileType	1.3.6.1.4.1.838.3.1.1.1.9.6.1.2	XFileType	read-only	The type of file represented by the file name.
STR xsysFileBuildName	1.3.6.1.4.1.838.3.1.1.1.9.6.1.3	DisplayString	read-only	A textual Build name of the file.
STR xsysFileBuildDate	1.3.6.1.4.1.838.3.1.1.1.9.6.1.4	DisplayString	read-only	A textual Build date of the file.
STR xsysFileBuildVersion	1.3.6.1.4.1.838.3.1.1.1.9.6.1.5	DisplayString	read-only	A textual Version of the file.
STR xsysFileSrcName	1.3.6.1.4.1.838.3.1.1.1.9.6.1.6	DisplayString	read-only	The original source file name of the originating file.
XST xsysFileSrc	1.3.6.1.4.1.838.3.1.1.1.9.6.1.7	XStorageType	read-only	The source type of the original file.
IP xsysFileHost	1.3.6.1.4.1.838.3.1.1.1.9.6.1.8	IpAddress	read-only	The IP Address of the TFTP host that was used to copy the original source file. Or 0.0.0.0 if not applicable.
STR xsysFileDate	1.3.6.1.4.1.838.3.1.1.1.9.6.1.9	DisplayString	read-only	The date associated with the file.
U32 xsysFileSize	1.3.6.1.4.1.838.3.1.1.1.9.6.1.10	Unsigned32	read-only	The size of the file in the units identified by xsysStorageAllocationUnits.
T/F xsysFileIsActive	1.3.6.1.4.1.838.3.1.1.1.9.6.1.11	TruthValue	read-only	The active flag associated with the file.
ROW xsysFileRowStatus	1.3.6.1.4.1.838.3.1.1.1.9.6.1.12	RowStatus	read-create	This object is used to remove entries from the table.
INT xsysWatchdogUpdate	1.3.6.1.4.1.838.3.1.1.1.10	INTEGER	read-write	The number of seconds between the watchdog timer updates. A watch dog reset will occur if the timer is not updated within three (3) cycles. A value of 0 disables the watchdog timout. The valid range of a functioning update is 20-30 seconds. note: a node boot is required for changes to take affect.
I32 xsysDateTimeEpochSeconds	1.3.6.1.4.1.838.3.1.1.1.11	Integer32	read-only	The current Date and Time represented by the number of seconds since January 1, 1970
xsysSnmpErrorLog	1.3.6.1.4.1.838.3.1.1.1.12
STR xsysSnmpErrorLast	1.3.6.1.4.1.838.3.1.1.1.12.1	DisplayString	read-only	The error information logged from the last SNMP request.
xsysSnmpErrorTable	1.3.6.1.4.1.838.3.1.1.1.12.2		not-accessible	A table of File List entries.
xsysSnmpErrorEntry	1.3.6.1.4.1.838.3.1.1.1.12.2.1		not-accessible	Information about the files on the system.
IP xsysSnmpErrorIpAddress	1.3.6.1.4.1.838.3.1.1.1.12.2.1.1	IpAddress	not-accessible	The IP Address of the errored request.
U32 xsysSnmpErrorReqID	1.3.6.1.4.1.838.3.1.1.1.12.2.1.2	Unsigned32	not-accessible	The PDU Request ID of the errored request.
STR xsysSnmpErrorMessage	1.3.6.1.4.1.838.3.1.1.1.12.2.1.3	DisplayString	read-only	The textual message of the errored request.
INT xsysDebugMode	1.3.6.1.4.1.838.3.1.1.1.13	INTEGER	read-write	The Administrative mode to control destructive debug commands.
STR xsysCreateSubInterface	1.3.6.1.4.1.838.3.1.1.1.14	DisplayString	read-write	The name of the layer interface for which a new sub-interface is to be created on. The layer interface must be the aggregate for that layer. For example, a value of ipsec.1 creates a sub-interface ipsec.1.1.
STR xsysPreLoginBanner	1.3.6.1.4.1.838.3.1.1.1.15	DisplayString	read-write	The text string displayed prior to logging into the system from either the directly connect consol, or telnet. The standard control characters can be used to customize the output.
STR xsysMotherBoardSerialNumber	1.3.6.1.4.1.838.3.1.1.1.16	DisplayString	read-only	The text string representing the serial number of the system's mother board
xsysConfigParams	1.3.6.1.4.1.838.3.1.1.2
DAT xsysConfigLastWriteDateTime	1.3.6.1.4.1.838.3.1.1.2.1	DateAndTimeForm	read-only	The value of xsysDateTime the last time any configuration parameter value was written to non-volatile memory. A zero-length value indicates that no changes have been made and that the system is running using all defaults. Note that this parameter must be saved in non-volatile memory across re-initializations of the system.
IP xsysConfigLastWriteSource	1.3.6.1.4.1.838.3.1.1.2.2	IpAddress	read-only	The source address of the entity that made the last configuration change to the system. The value 127.0.0.1 (the loopback address) indicates the local console. This value must also be saved in non-volatile memory across re-initializations of the system.
xsysSubsystemTable	1.3.6.1.4.1.838.3.1.1.2.3		not-accessible	This table allows subsystems to be reset on an individual basis (as opposed to as a group using the xsysResetControl object).
xsysSubsystemEntry	1.3.6.1.4.1.838.3.1.1.2.3.1		not-accessible	A subsystem that's currently running.
STR xsysSubsystemName	1.3.6.1.4.1.838.3.1.1.2.3.1.1	DisplayString	not-accessible	The name that uniquely identifies the subsystem.
INT xsysSubsystemResetControl	1.3.6.1.4.1.838.3.1.1.2.3.1.2	INTEGER	read-write	Setting this object causes individual subsystems to take action, as defined below. Not all subsystems support all of the actions available. Valid actions for each subsystem can be set without errors. If an action is invalid for a subsystem, then an error PDU of 'BadValue' is returned. o ready - NoOp. No action is taken by the subsystem. o defaultConfig - All configuration records associated with the particular subsystem are deleted. The subsystem will restore to default configuration if possible, or it continues to run using its runtime values. On the next node boot, default records will be written to the configuration memory. o reset - The subsystem will be restarted using its existing configuration memory. o resetToDefaults - All configuration records associated with the particular subsystem are deleted. The subsystem is then restarted, causing default records to be written to configuration memory. o purgeRecords - All old configuration records associated with the particular subsystem are deleted. Some subsystems maintain old configuration records. This allows you to downgrade without losing configuration information. These old configuration records consume configuration memory. Purging old configuration records frees the associated configuration memory for current use. When read, the value of the object is always 'ready(1)'.
U32 xsysConfigFileStart	1.3.6.1.4.1.838.3.1.1.2.4	Unsigned32	read-only	The address of the start of the virtual config file.
U32 xsysConfigEndOfFile	1.3.6.1.4.1.838.3.1.1.2.5	Unsigned32	read-only	The address of the end of the virtual config file.
U32 xsysConfigEndOfData	1.3.6.1.4.1.838.3.1.1.2.6	Unsigned32	read-only	The address where data ends in the config file.
U32 xsysConfigDataSize	1.3.6.1.4.1.838.3.1.1.2.7	Unsigned32	read-only	The sum of all data blocks in the config file.
U32 xsysConfigFreeBlocksTotalBytes	1.3.6.1.4.1.838.3.1.1.2.8	Unsigned32	read-only	The sum of all free blocks in the config file.
U32 xsysConfigNumberConfigRecs	1.3.6.1.4.1.838.3.1.1.2.9	Unsigned32	read-only	The number records in file counter.
G32 xsysConfigPercentFull	1.3.6.1.4.1.838.3.1.1.2.10	Gauge32	read-only	The percentage of NVRAM that is full.
INT xsysConfigCompression	1.3.6.1.4.1.838.3.1.1.2.11	INTEGER	read-only	Displays whether configuration file compression is currently active or not. The operational effects of compression are transparent to the user.
xsysEvents	1.3.6.1.4.1.838.3.1.1.4
xsysEventTable	1.3.6.1.4.1.838.3.1.1.4.1		not-accessible	A table of events in the order that they were generated. An event may or may not be added to this (conceptual) table based on whether it passes all of the input filter criteria identified below. Also, when the table is retrieved via SNMP operations, it may or may not include a specific event based on the current output filter criteria.
xsysEventEntry	1.3.6.1.4.1.838.3.1.1.4.1.1		not-accessible	Information about a single event.
U32 xsysEventIndex	1.3.6.1.4.1.838.3.1.1.4.1.1.1	Unsigned32	not-accessible	Indicates the number of the event. Events are numbered sequentially from 1 - n. A management station can keep track of the last event it uploaded and periodically GET-NEXT from there to determine if there have been any new events. This means that, as events are removed from the table their indices are not reused until the next reset to default configuration (which loses all stored events). Also, the agent must store the 'next available event number' value across re-initializations of the system, resetting it to 1 only when the configuration is reset to defaults.
DAT xsysEventDateTime	1.3.6.1.4.1.838.3.1.1.4.1.1.2	DateAndTimeForm	read-only	The date and time when this event was generated.
STR xsysEventSubsystem	1.3.6.1.4.1.838.3.1.1.4.1.1.3	DisplayString	read-only	The subsystem this event was generated by.
INT xsysEventLevel	1.3.6.1.4.1.838.3.1.1.4.1.1.4	INTEGER	read-only	The level of the event.
U32 xsysEventId	1.3.6.1.4.1.838.3.1.1.4.1.1.5	Unsigned32	read-only	The identifier of the event. This id is unique within a subsystem.
STR xsysEventMsg	1.3.6.1.4.1.838.3.1.1.4.1.1.6	DisplayString	read-only	Textual message associated with the event.
I32 xsysEventMaxTableSize	1.3.6.1.4.1.838.3.1.1.4.2	Integer32	read-write	The maximum number of events in the event log table. When the number of events exceeds this value, newer events continue to be added and the oldest events are discarded. Changing this object takes affect on the next system boot. Note that the last 20 warning and fatal level events are also stored to non-volatile memory and are relogged into event log upon the next system boot.
BIT xsysEventInFilterLevel	1.3.6.1.4.1.838.3.1.1.4.3	Bits	read-write	The current event input filter level. The user can choose to not log events of the lower levels, but they cannot filter out warning and fatal events. By default, debug and trace events are filtered on input.
BIT xsysEventOutFilterLevel	1.3.6.1.4.1.838.3.1.1.4.4	Bits	read-write	The current event output filter level. The output filter effects which entries are returned when the table is dumped (e.g., via a GET-NEXT sweep). By default, no events are filtered on output.
DAT xsysEventOutFilterDateTime	1.3.6.1.4.1.838.3.1.1.4.5	DateAndTimeForm	read-write	The current event output filter level based on date/time. Only events with xsysEventDateTime at or after this date are returned. By default, events from all date/times are returned.
xsysEventSubsystemFilterTable	1.3.6.1.4.1.838.3.1.1.4.6		not-accessible	A table of filter information by subsystem.
xsysEventSubsystemFilterEntry	1.3.6.1.4.1.838.3.1.1.4.6.1		not-accessible	Filter information for a particular subsystem.
STR xsysEventSubsystemFilterSubsystem	1.3.6.1.4.1.838.3.1.1.4.6.1.1	DisplayString	not-accessible	The subsystem this filter applies to.
INT xsysEventSubsystemFilterDirection	1.3.6.1.4.1.838.3.1.1.4.6.1.2	INTEGER	read-write	The direction(s) to filter events from this subsystem, if any. By default, events from a subsystem are not filtered in either direction.
xsysEventIdFilterTable	1.3.6.1.4.1.838.3.1.1.4.7		not-accessible	A table of filter information for each subsystem/id combination.
xsysEventIdFilterEntry	1.3.6.1.4.1.838.3.1.1.4.7.1		not-accessible	Information for a particular subsystem/id combination.
U32 xsysEventIdFilterId	1.3.6.1.4.1.838.3.1.1.4.7.1.1	Unsigned32	not-accessible	The identifier of the event this filter information is for.
STR xsysEventIdFilterName	1.3.6.1.4.1.838.3.1.1.4.7.1.2	DisplayString	read-only	The textual name of the event.
STR xsysEventIdFilterMessage	1.3.6.1.4.1.838.3.1.1.4.7.1.3	DisplayString	read-only	The descriptive message of the event
INT xsysEventIdFilterDirection	1.3.6.1.4.1.838.3.1.1.4.7.1.4	INTEGER	read-write	The direction(s) in which to filter this event id. Note that the filter information per event id is only looked at if the subsystem as a whole is not being filtered. By default, individual event ids are not filtered.
INT xsysEventsClearAllControl	1.3.6.1.4.1.838.3.1.1.4.8	INTEGER	read-write	Setting this object to 'execute(2)' removes all entries from the xsysEventTable. When read, this object always returns the value 'ready(1)'.
T/F xsysEventsAsTraps	1.3.6.1.4.1.838.3.1.1.4.9	TruthValue	read-write	This object is used to control whether Xedia system events are sent as SNMP traps. Generally, it is not appropriate to send all events as traps since this would consume a fairly large amount of network bandwidth. However, in the case where the events may be useful for debugging purposes, this object can be changed to 'true(1)'.
T/F xsysEventDisplay	1.3.6.1.4.1.838.3.1.1.4.10	TruthValue	read-write	Normally, all events that pass the input filter criteria are both logged and written out to the system console. This can be a problem if the console is being used interactively, for example to configure the system. Therefore, this object can be set to 'false(2)' to disable printing of the events as they occur to the display. Instead, the user can display the event log using explicit commands.
T/F xsysEventsAsSyslogMessages	1.3.6.1.4.1.838.3.1.1.4.11	TruthValue	read-write	This object is used to control whether Xedia system events are sent as UNIX syslog messages. Generally, it is not appropriate to send all events as syslog messages since this would consume a fairly large amount of network bandwidth and system resources, such as CPU processing. However, in the case where it is desirable to archive system events to a host with a hard drive, or tools that can manipulate the log output, this object can be changed to 'true(1)'.
STR xsysEventSyslogRemoteServer	1.3.6.1.4.1.838.3.1.1.4.13	DisplayString	read-write	PTS FIX THIS - NEEDS DESCRIPTION HERE The address(es) of the remote host where a syslogd syslog daemon is running and awaits messages from this AccessPoint. Maximum number of remote servers is limited to 5.
I32 xsysEventNvRamMaxTableSize	1.3.6.1.4.1.838.3.1.1.4.14	Integer32	read-write	The maximum number of warning and fatal level events could be stored to non-volatile memory and are relogged into event log upon the next system boot. When the number of events exceeds this value, newer events continue to be added and the oldest events are discarded. Changing this object takes affect on the next system boot.
xsysHardware	1.3.6.1.4.1.838.3.1.1.5
STR xsysProcessorDescr	1.3.6.1.4.1.838.3.1.1.5.1	DisplayString	read-only	A textual description of the (main) processor for the system. This should include the manufacturer and the revision/clock speed.
INT xsysPowerSupplyType	1.3.6.1.4.1.838.3.1.1.5.2	INTEGER	read-only	The type of the power supply.
G32 xsysCpuUtilization	1.3.6.1.4.1.838.3.1.1.5.3	Gauge32	read-only	The average, over some implementation-defined sampling period, of the percentage of time that the system's (main) processor was not idle.
xsysPciTable	1.3.6.1.4.1.838.3.1.1.5.4		not-accessible	A table of PCI devices in the system.
xsysPciEntry	1.3.6.1.4.1.838.3.1.1.5.4.1		not-accessible	Information about a single PCI device in the system.
U32 xsysPciDeviceIndex	1.3.6.1.4.1.838.3.1.1.5.4.1.1	Unsigned32	not-accessible	A arbitrary unique number to identify the PCI device in the system.
U32 xsysPciVendorId	1.3.6.1.4.1.838.3.1.1.5.4.1.2	Unsigned32	read-only	The vendor (manufacturer) of the device. Values that are relevent to the Xedia Velociraptor include: 4113 (0x1011) - DEC 0000 (0x0000) - Darkroom Technology ?? 0000 (0x0000) - SDL ?? 4523 (0x11ab) - Galileo Technology
U32 xsysPciDeviceId	1.3.6.1.4.1.838.3.1.1.5.4.1.3	Unsigned32	read-only	A vendor-defined identifier for the particular device.
U32 xsysPciRevisionId	1.3.6.1.4.1.838.3.1.1.5.4.1.4	Unsigned32	read-only	A revision number of the device, assigned by the vendor.
INT xsysPciBaseClass	1.3.6.1.4.1.838.3.1.1.5.4.1.5	INTEGER	read-only	The type (class) of PCI device.
U32 xsysPciSubClass	1.3.6.1.4.1.838.3.1.1.5.4.1.6	Unsigned32	read-only	The sub-type (or sub-class) of the PCI device. This value can only be interpreted relative to the xsysPciBaseClass value. Interesting device sub-classes relevent to Xedia's Velociraptor: Class networkController: ethernetController(0), tokenRingController(1), fddiController(2), atmController(3), otherNetworkController(4) Class bridgeDevice: hostPciBridge(0), pciIsaBridge(1), pciEisaBridge(2), pciMicroChannelBridge(3), pciPciBridge(4), pciPcmciaBridge(5), pciNuBusBridge(6), pciCardBusBridge(7), otherBridgeDevice(128)
BIT xsysPciStatus	1.3.6.1.4.1.838.3.1.1.5.4.1.7	Bits	read-only	This is the PCI status register. Most of these bits are totally uninteresting to the end-user but are included for debugging purposes. For more detail see Table 6-3 'Status Register Bits' in the reference below.
NUM xsysPciIfIndex	1.3.6.1.4.1.838.3.1.1.5.4.1.8	InterfaceIndexOrZero	read-only	The ifIndex of the associated interface or 0 if the PCI device is not interface-related.
C32 xsysPciFatalBusErrors	1.3.6.1.4.1.838.3.1.1.5.4.1.9	Counter32	read-only	The total number of fatal bus errors that were detected by this device. This will be a sum of xsysPciMasterAborts, xsysPciParityErrors, and xsysPciTargetAborts
C32 xsysPciMasterAborts	1.3.6.1.4.1.838.3.1.1.5.4.1.10	Counter32	read-only	The total number master abort errors that were detected by this device.
C32 xsysPciParityErrors	1.3.6.1.4.1.838.3.1.1.5.4.1.11	Counter32	read-only	The total number of parity errors that were detected by this device.
C32 xsysPciTargetAborts	1.3.6.1.4.1.838.3.1.1.5.4.1.12	Counter32	read-only	The total number of target abort errors that were detected by this device.
xsysSerial	1.3.6.1.4.1.838.3.1.1.6
xsysSerialConfigTable	1.3.6.1.4.1.838.3.1.1.6.1		not-accessible	This table contains configuration information for the serial ports of the system.
xsysSerialConfigEntry	1.3.6.1.4.1.838.3.1.1.6.1.1		not-accessible	Configuration information for one of the system's serial ports.
U32 xsysSerialPortNumber	1.3.6.1.4.1.838.3.1.1.6.1.1.1	Unsigned32	not-accessible	The physical port number of the serial port.
INT xsysSerialBaudRate	1.3.6.1.4.1.838.3.1.1.6.1.1.2	INTEGER	read-write	The baud rate in bits per second for this serial port.
U32 xsysSerialDataBits	1.3.6.1.4.1.838.3.1.1.6.1.1.3	Unsigned32	read-write	The number of data bits for this serial port.
INT xsysSerialParity	1.3.6.1.4.1.838.3.1.1.6.1.1.4	INTEGER	read-write	The type of parity supported on this serial port.
INT xsysSerialStopBits	1.3.6.1.4.1.838.3.1.1.6.1.1.5	INTEGER	read-write	The number of stop bits on this serial port.
INT xsysSerialFlowControl	1.3.6.1.4.1.838.3.1.1.6.1.1.6	INTEGER	read-write	The type of flow control used on this serial port.
U32 xsysSerialTimeout	1.3.6.1.4.1.838.3.1.1.6.1.1.7	Unsigned32	read-write	The number of seconds of inactivity to allow before timing out the session using the serial port. The value 0 means no timeout.
xsysInterfaces	1.3.6.1.4.1.838.3.1.1.7
xsysIfNameIndexTable	1.3.6.1.4.1.838.3.1.1.7.1		not-accessible	A table of ifName to ifIndex mappings. This table makes it easier for the manager to get the ifIndex using the textual name that the user interfaces uses to identify the interface (e.g., eth.1, fr.1)
xsysIfNameIndexEntry	1.3.6.1.4.1.838.3.1.1.7.1.1		not-accessible	A single ifName to ifIndex mapping.
STR xsysIfName	1.3.6.1.4.1.838.3.1.1.7.1.1.1	DisplayString	not-accessible	The value of ifName for the ifEntry with the same ifIndex as xsysIfIndex.
NUM xsysIfIndex	1.3.6.1.4.1.838.3.1.1.7.1.1.2	InterfaceIndex	read-only	The value of ifIndex for the interface this entry is associated with.
xsysIfStackDisplayTable	1.3.6.1.4.1.838.3.1.1.7.2		not-accessible	This table contains a read-only display of the interface stack in indented format. The first row will correspond to one of the system's physical interfaces. The following rows will be in order of which interfaces are stacked on top of which with blank space at the beginning of the xsysIfStackDisplayString values to show the hierarchy. (Note that several rows may be indented to the same level if they are stacked on top of the same lower-layer interface.) When the top of one stack is reached, the next physical interface will start at the left again.
xsysIfStackDisplayEntry	1.3.6.1.4.1.838.3.1.1.7.2.1		not-accessible	Information about one entry in the interface stack.
I32 xsysIfStackDisplayIndex	1.3.6.1.4.1.838.3.1.1.7.2.1.1	Integer32	not-accessible	The row number in the table.
STR xsysIfStackDisplayString	1.3.6.1.4.1.838.3.1.1.7.2.1.2	DisplayString	read-only	The descriptive string for the entry in the stack table. This string will contain (at least) the ifName of the corresponding interface. The string will start with blank space in order to indent the text so that the resulting table presents an outline view of the interface stack.
xsysHttpd	1.3.6.1.4.1.838.3.1.1.8
INT xsysHttpdAdminStatus	1.3.6.1.4.1.838.3.1.1.8.1	INTEGER	read-write	The desired state of the web server running on the system. By default, the web server is running but the manager can disable it using this control in order to save memory and/or for security reasons. This object is implementation-dependent and may require a node boot to change the value of xsysHttpdOperStatus.
INT xsysHttpdOperStatus	1.3.6.1.4.1.838.3.1.1.8.2	INTEGER	read-only	The actual state of the web server.
STR xsysHttpdNmsWebServer	1.3.6.1.4.1.838.3.1.1.8.3	DisplayString	read-write	The domain name or IP address of the web server that will be referenced in the pages generated by the embedded HTTPD for images, documentation, and other space-consuming data.
I32 xsysHttpdNmsWebServerPort	1.3.6.1.4.1.838.3.1.1.8.4	Integer32	read-write	The TCP port being used by the web server identified by xsysHttpdNmsWebServer.
xsysTelnetd	1.3.6.1.4.1.838.3.1.1.9
INT xsysTelnetdAdminStatus	1.3.6.1.4.1.838.3.1.1.9.1	INTEGER	read-write	The desired state of the Telnet server running on the system. By default, the Telnet server is running but the manager can disable it using this control in order to save memory and/or for security reasons. This object is implementation-dependent and may require a node boot to change the value of xsysTelnetOperStatus.
INT xsysTelnetdOperStatus	1.3.6.1.4.1.838.3.1.1.9.2	INTEGER	read-only	The actual state of the Telnet server.
xsysDns	1.3.6.1.4.1.838.3.1.1.10
STR xsysDnsDomain	1.3.6.1.4.1.838.3.1.1.10.1	DisplayString	read-write	The domain name suffix used when fully qualified domain names are not specified. When no domain suffix is specified, you must use fully qualified domain names. When a domain suffix is specified you may use the host or node name portion of the domain name when referring to domain names within the domain sub-tree (suffix) specified by this object. For example, setting this object to `xedia.com' allows you to refer to the node `barbados.xedia.com' as `barbados'. For those familiar with the UNIX operating system, this object is equivalent to the `domain' keyword in the /etc/resolv.conf file. For example, setting this object to `xedia.com' has the same affect as specifying `domain xedia.com' in your /etc/resolv.conf file. Values of this object must adhere to the rules for domain names specified in RFC 1034 and RFC 1035.
INT xsysDnsAdminStatus	1.3.6.1.4.1.838.3.1.1.10.2	INTEGER	read-write	The desired state of the DNS resolver. The DNS resolver is operational by default, but is unable to resolve names or addresses until at least one name server is defined. The DNS resolver can therefore be removed from operation by removing all configured name servers, or by setting this object to `down'.
INT xsysDnsOperStatus	1.3.6.1.4.1.838.3.1.1.10.3	INTEGER	read-only	The actual state of the DNS resolver. `up' indicates that the resolver is able to resolve names and addresses. `down' indicates that the resolver is administratively disabled from resolving names. `noNameServerDefined' indicates that the resolver is up, but is unable to resolve names or addresses because no name servers have been configured.
C32 xsysDnsQueries	1.3.6.1.4.1.838.3.1.1.10.4	Counter32	read-only	The number of queries sent by the resolver.
C32 xsysDnsResponses	1.3.6.1.4.1.838.3.1.1.10.5	Counter32	read-only	The number of responses returned by name servers.
C32 xsysDnsNoErrorResponses	1.3.6.1.4.1.838.3.1.1.10.6	Counter32	read-only	The number of responses returned by name servers which contained response codes indicating no error.
C32 xsysDnsFormattedIllegallyResponses	1.3.6.1.4.1.838.3.1.1.10.7	Counter32	read-only	The number of responses returned by name servers which contained response codes indicating that the question was formatted illegally.
C32 xsysDnsServerFailedResponses	1.3.6.1.4.1.838.3.1.1.10.8	Counter32	read-only	The number of responses returned by name servers which contained response codes indicating that the server failed to respond.
C32 xsysDnsNameDoesNotExistResponses	1.3.6.1.4.1.838.3.1.1.10.9	Counter32	read-only	The number of responses returned by name servers which contained response codes indicating that the requested name does not exist.
C32 xsysDnsServerDoesNotSupportResponses	1.3.6.1.4.1.838.3.1.1.10.10	Counter32	read-only	The number of responses returned by name servers which contained response codes indicating that the nameserver does not support the requested operation.
C32 xsysDnsServerRefusedToAnswerResponses	1.3.6.1.4.1.838.3.1.1.10.11	Counter32	read-only	The number of responses returned by name servers which contained response codes indicating that the name server refused to answer.
xsysDnsNameServerTable	1.3.6.1.4.1.838.3.1.1.10.12		not-accessible	Table of safety belt information used by the resolver when it hasn't got any better idea of where to send a query, such as when the resolver is booting or is a stub resolver. Entries created in or deleted from the standard Resolver MIB (RFC 1612) dnsResConfigSbeltTable are also created in or deteted from this table. When creating entries in the dnsResConfigSbeltTable, default values are used for the columns which do not exist in this table. Similarly, modifications to this table are also reflected in the dnsResConfigSbeltTable. The table below shows the relationships between the two tables. dnsResConfigSbeltTable xsysDnsNameServerTable ========================== ========================== INDEX INDEX dnsResConfigSbeltAddr xsysDnsNameServerAddr dnsResConfigSbeltSubTree dnsResConfigSbeltClass dnsResConfigSbeltAddr xsysDnsNameServerAddr dnsResConfigSbeltName DEF_VAL (empty string) dnsResConfigSbeltRecursion DEF_VAL recursive(2) dnsResConfigSbeltPref xsysDnsNameServerPref dnsResConfigSbeltSubTree DEF_VAL (empty string) dnsResConfigSbeltClass DEF_VAL 1 (IN - Internet) dnsResConfigSbeltStatus xsysDnsNameServerStatus
xsysDnsNameServerEntry	1.3.6.1.4.1.838.3.1.1.10.12.1		not-accessible	An entry in the resolver's Sbelt table. Rows may be created or deleted at any time by the DNS resolver and by SNMP SET requests. Whether the values changed via SNMP are saved in stable storage across `reset' operations is implementation-specific.
IP xsysDnsNameServerAddr	1.3.6.1.4.1.838.3.1.1.10.12.1.1	IpAddress	not-accessible	The IP address of the Sbelt name server identified by this row of the table.
INT xsysDnsNameServerPref	1.3.6.1.4.1.838.3.1.1.10.12.1.2	INTEGER	read-create	This value identifies the preference for the name server identified in this row of the table. The lower the value, the more desirable the resolver considers this server.
ROW xsysDnsNameServerStatus	1.3.6.1.4.1.838.3.1.1.10.12.1.3	RowStatus	read-create	Row status column for this row of the Name Server table.
xsysDnsCacheTable	1.3.6.1.4.1.838.3.1.1.10.13		not-accessible	This table contains information about all the resource records currently in the resolver's cache. Entries created in or deleted from the standard Resolver MIB (RFC 1612) dnsResCacheRRTable are also created in or deteted from this table.
xsysDnsCacheEntry	1.3.6.1.4.1.838.3.1.1.10.13.1		not-accessible	An entry in the resolvers's cache. Rows may be created only by the resolver. SNMP SET requests may be used to delete rows.
STR xsysDnsCacheName	1.3.6.1.4.1.838.3.1.1.10.13.1.1	DisplayString	not-accessible	Owner name of the Resource Record in the cache which is identified in this row of the table. As described in RFC-1034, the owner of the record is the domain name were the RR is found.
INT xsysDnsCacheClass	1.3.6.1.4.1.838.3.1.1.10.13.1.2	INTEGER	not-accessible	DNS class of the Resource Record in the cache which is identified in this row of the table. Only class `internet' is supported at this time.
INT xsysDnsCacheType	1.3.6.1.4.1.838.3.1.1.10.13.1.3	INTEGER	not-accessible	DNS type of the Resource Record in the cache which is identified in this row of the table.
I32 xsysDnsCacheIndex	1.3.6.1.4.1.838.3.1.1.10.13.1.4	Integer32	not-accessible	A value which makes entries in the table unique when the other index values (xsysDnsCacheName, xsysDnsCacheClass, and xsysDnsCacheType) do not provide a unique index.
STR xsysDnsCacheTTL	1.3.6.1.4.1.838.3.1.1.10.13.1.5	DisplayString	read-only	Time-To-Live of RR in DNS cache. This is the initial TTL value which was received with the RR when it was originally received, subject to the maximum limit value specified in dnsResCacheMaxTTL.
STR xsysDnsCacheElapsedTTL	1.3.6.1.4.1.838.3.1.1.10.13.1.6	DisplayString	read-only	Elapsed seconds since RR was received.
IP xsysDnsCacheSource	1.3.6.1.4.1.838.3.1.1.10.13.1.7	IpAddress	read-only	Host from which RR was received, 0.0.0.0 if unknown.
STR xsysDnsCacheData	1.3.6.1.4.1.838.3.1.1.10.13.1.8	DisplayString	read-only	RDATA portion of a cached RR. The value is in the format defined for the particular DNS class and type of the resource record.
ROW xsysDnsCacheStatus	1.3.6.1.4.1.838.3.1.1.10.13.1.9	RowStatus	read-write	Status column for the resolver cache table. Since only the agent (DNS resolver) creates rows in this table, the only values that a manager may write to this variable are active(1) and destroy(6).
xsysNotifications	1.3.6.1.4.1.838.3.1.2
xsysNotificationPrefix	1.3.6.1.4.1.838.3.1.2.0
NTF xsysSystemEvent	1.3.6.1.4.1.838.3.1.2.0.1			An SNMP trap definition for carrying Xedia system events. Some events have specific SNMP traps, such as linkUp or linkDown traps. (These are generally events with levels of info(3), warning(4), or fatal(5).) The events which do not have specific SNMP traps defined for them will be sent using this NOTIFICATION-TYPE if xsysEventsAsTraps is set to 'true(1)'.
xsysConformance	1.3.6.1.4.1.838.3.1.3
xsysCompliances	1.3.6.1.4.1.838.3.1.3.1
xsysCompliance	1.3.6.1.4.1.838.3.1.3.1.1			The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
xsysGroups	1.3.6.1.4.1.838.3.1.3.2
xsysAllGroup	1.3.6.1.4.1.838.3.1.3.2.1			The set of all accessible objects in this MIB.

RFC description

Xedia device system management including configuration, file transfers, and status monitoring.

Start monitoring Xedia Corporation routers (boot-image priority/running-image-version status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XEDIA-SYSTEM-MIB