WebGraph-Air-Quality-US-MIB

All MIBs › WebGraph-Air-Quality-US-MIB

Category: Power and Environmental Monitoring

Description: Monitors WebGraph air quality sensor measurements including CO2 concentration, VOC levels, and environmental conditions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WebGraph-Air-Quality-US-MIB?

This is a vendor-specific proprietary MIB from WebGraph, a maker of networked environmental monitoring appliances used to watch conditions in data centers, server rooms, and equipment closets. It exposes air-quality related sensor data (using US unit scaling) including per-sensor identification, measured environmental values, and derived binary alarm states. Although branded 'air quality,' the exposed objects are heavily temperature-value oriented, and the module supports monitoring hardware/environmental status by letting an operator track whether sensor readings have crossed configured thresholds indicating an HVAC or environmental control problem. There is no documented dependency on other MIBs; the objects are rooted entirely under WebGraph's own enterprise MIB tree. It is typically deployed as a small networked sensor appliance placed inside racks or rooms to feed environmental readings into a central monitoring system. Engineers can download the WebGraph-Air-Quality-US-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WebGraph-Air-Quality-US-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

WebGraph networked environmental/air-quality sensor appliance

Monitoring Examples

An administrator polling the wtWebGraphAirQualitySensorTable/wtWebGraphAirQualitySensorEntry (indexed by wtWebGraphAirQualitySensorNo) can enumerate each attached sensor, then read the corresponding wtWebGraphAirQualityTempValueTable/Entry for the current measured value. The wtWebGraphAirQualityBinaryTempValueTable exposes a threshold-derived alarm bit per sensor, so a transition to the alarm state signals an environmental excursion, such as a server room overheating due to HVAC failure. The wtWebGraphAirQualityTempValuePktTable suggests readings are also delivered in a packetized form for streaming/logging purposes.

What Can Be Monitored

configured sensor count
per-sensor temperature/air-quality reading
binary threshold alarm state
packetized sensor data stream

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

IpAddress
NetworkAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
wut	1.3.6.1.4.1.5040
wtComServer	1.3.6.1.4.1.5040.1
wtWebio	1.3.6.1.4.1.5040.1.2
wtWebGraphAirQuality	1.3.6.1.4.1.5040.1.2.35
NTF wtWebGraphAirQualityAlert1	1.3.6.1.4.1.5040.1.2.35.0.31			This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert2	1.3.6.1.4.1.5040.1.2.35.0.32			This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert3	1.3.6.1.4.1.5040.1.2.35.0.33			This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert4	1.3.6.1.4.1.5040.1.2.35.0.34			This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert5	1.3.6.1.4.1.5040.1.2.35.0.35			This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert6	1.3.6.1.4.1.5040.1.2.35.0.36			This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert7	1.3.6.1.4.1.5040.1.2.35.0.37			This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert8	1.3.6.1.4.1.5040.1.2.35.0.38			This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert9	1.3.6.1.4.1.5040.1.2.35.0.91			This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert10	1.3.6.1.4.1.5040.1.2.35.0.92			This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert11	1.3.6.1.4.1.5040.1.2.35.0.93			This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert12	1.3.6.1.4.1.5040.1.2.35.0.94			This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert13	1.3.6.1.4.1.5040.1.2.35.0.95			This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert14	1.3.6.1.4.1.5040.1.2.35.0.96			This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert15	1.3.6.1.4.1.5040.1.2.35.0.97			This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlert16	1.3.6.1.4.1.5040.1.2.35.0.98			This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled.
NTF wtWebGraphAirQualityAlertDiag	1.3.6.1.4.1.5040.1.2.35.0.110			This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled.
wtWebGraphAirQualityTemp	1.3.6.1.4.1.5040.1.2.35.1
INT wtWebGraphAirQualitySensors	1.3.6.1.4.1.5040.1.2.35.1.1	INTEGER	read-only	Number of sensors
wtWebGraphAirQualitySensorTable	1.3.6.1.4.1.5040.1.2.35.1.2		not-accessible	List of sensors.
wtWebGraphAirQualitySensorEntry	1.3.6.1.4.1.5040.1.2.35.1.2.1		not-accessible	List of sensor numbers.
INT wtWebGraphAirQualitySensorNo	1.3.6.1.4.1.5040.1.2.35.1.2.1.1	INTEGER	read-only	Sensor number.
wtWebGraphAirQualityTempValueTable	1.3.6.1.4.1.5040.1.2.35.1.3		not-accessible	List of measurement values corresponding to the channel numbers.
wtWebGraphAirQualityTempValueEntry	1.3.6.1.4.1.5040.1.2.35.1.3.1		not-accessible	Measurement values of the sensors.
OCT wtWebGraphAirQualityTempValue	1.3.6.1.4.1.5040.1.2.35.1.3.1.1	OCTET STRING	read-only	Measurement value of the sensor, ASCII, 5 characters in length.
wtWebGraphAirQualityBinaryTempValueTable	1.3.6.1.4.1.5040.1.2.35.1.4		not-accessible	List of binary measurement values corresponding to the channel numbers.
wtWebGraphAirQualityBinaryTempValueEntry	1.3.6.1.4.1.5040.1.2.35.1.4.1		not-accessible	Binary measurement values of the sensors.
INT wtWebGraphAirQualityBinaryTempValue	1.3.6.1.4.1.5040.1.2.35.1.4.1.1	INTEGER	read-only	Binary measurement value of the sensor in 1/10 degrees Celsius, 1/10 per cent or 1/10 ppm, signed number, 0x7FFFFFFF indicates an invalid measured value.
wtWebGraphAirQualityTempValuePktTable	1.3.6.1.4.1.5040.1.2.35.1.8		not-accessible	List of measurement values corresponding to the channel numbers.
wtWebGraphAirQualityTempValuePktEntry	1.3.6.1.4.1.5040.1.2.35.1.8.1		not-accessible	Measurement values of the sensors.
OCT wtWebGraphAirQualityTempValuePkt	1.3.6.1.4.1.5040.1.2.35.1.8.1.1	OCTET STRING	read-only	Measurement value of the sensor, ASCII, 5 characters in length, delimeter is decimal point.
wtWebGraphAirQualitySessCntrl	1.3.6.1.4.1.5040.1.2.35.2
OCT wtWebGraphAirQualitySessCntrlPassword	1.3.6.1.4.1.5040.1.2.35.2.1	OCTET STRING	read-write	Entering this password opens a session which is ended by writing a 1 to wtWebGraphAirQualitySessCntrlLogout. When read this variable provides a string of length zero.
INT wtWebGraphAirQualitySessCntrlConfigMode	1.3.6.1.4.1.5040.1.2.35.2.2	INTEGER	read-only	When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
INT wtWebGraphAirQualitySessCntrlLogout	1.3.6.1.4.1.5040.1.2.35.2.3	INTEGER	read-write	If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
OCT wtWebGraphAirQualitySessCntrlAdminPassword	1.3.6.1.4.1.5040.1.2.35.2.4	OCTET STRING	read-write	This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public.
OCT wtWebGraphAirQualitySessCntrlConfigPassword	1.3.6.1.4.1.5040.1.2.35.2.5	OCTET STRING	read-write	This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer.
wtWebGraphAirQualityConfig	1.3.6.1.4.1.5040.1.2.35.3
wtWebGraphAirQualityDevice	1.3.6.1.4.1.5040.1.2.35.3.1
wtWebGraphAirQualityText	1.3.6.1.4.1.5040.1.2.35.3.1.1
OCT wtWebGraphAirQualityDeviceName	1.3.6.1.4.1.5040.1.2.35.3.1.1.1	OCTET STRING	read-write	Name of the Webio, which is user definable.
OCT wtWebGraphAirQualityDeviceText	1.3.6.1.4.1.5040.1.2.35.3.1.1.2	OCTET STRING	read-write	Description of the Webio, which is user definable.
OCT wtWebGraphAirQualityDeviceLocation	1.3.6.1.4.1.5040.1.2.35.3.1.1.3	OCTET STRING	read-write	Description of the location of the Webio, which is user definable.
OCT wtWebGraphAirQualityDeviceContact	1.3.6.1.4.1.5040.1.2.35.3.1.1.4	OCTET STRING	read-write	Contact address of the system operator of the Webio, which is user definable.
wtWebGraphAirQualityTimeDate	1.3.6.1.4.1.5040.1.2.35.3.1.2
wtWebGraphAirQualityTimeZone	1.3.6.1.4.1.5040.1.2.35.3.1.2.1
INT wtWebGraphAirQualityTzOffsetHrs	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.1	INTEGER	read-write	Offset hours for the time zone (winter time) with respect to UTC.
INT wtWebGraphAirQualityTzOffsetMin	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.2	INTEGER	read-write	Offset minutes for the time zone (winter time) with respect to UTC.
OCT wtWebGraphAirQualityTzEnable	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.3	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone
INT wtWebGraphAirQualityStTzOffsetHrs	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.4	INTEGER	read-write	Offset hours of the time zone (summer time) with respect to UTC.
INT wtWebGraphAirQualityStTzOffsetMin	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.5	INTEGER	read-write	Offset minutes of the time zone (summer time) with respect to UTC.
OCT wtWebGraphAirQualityStTzEnable	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.6	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime
INT wtWebGraphAirQualityStTzStartMonth	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.7	INTEGER	read-write	Month in which the change is made from winter time to summer time.
INT wtWebGraphAirQualityStTzStartMode	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.8	INTEGER	read-write	Mode of the day of the week for which the change is made from winter time to summer time.
INT wtWebGraphAirQualityStTzStartWday	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.9	INTEGER	read-write	Day of the week on which the change is made from winter time to summer time
INT wtWebGraphAirQualityStTzStartHrs	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.10	INTEGER	read-write	Hour in which the time zone is changed from winter to summer time with respect to UTC.
INT wtWebGraphAirQualityStTzStartMin	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.11	INTEGER	read-write	Minute in which the time zone is changed from winter to summer time with respect to UTC.
INT wtWebGraphAirQualityStTzStopMonth	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.12	INTEGER	read-write	Month in which the change is made from summer time to winter time.
INT wtWebGraphAirQualityStTzStopMode	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.13	INTEGER	read-write	Mode of the week day on which the change is made from summer time to winter time.
INT wtWebGraphAirQualityStTzStopWday	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.14	INTEGER	read-write	Day of the week on which the change is made from summer time to winter time.
INT wtWebGraphAirQualityStTzStopHrs	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.15	INTEGER	read-write	Hour at which the time zone is changed from summer to winter time with respect to UTC.
INT wtWebGraphAirQualityStTzStopMin	1.3.6.1.4.1.5040.1.2.35.3.1.2.1.16	INTEGER	read-write	Minute at which the time zone is changed from summer to winter time with respect to UTC.
wtWebGraphAirQualityTimeServer	1.3.6.1.4.1.5040.1.2.35.3.1.2.2
OCT wtWebGraphAirQualityTimeServer1	1.3.6.1.4.1.5040.1.2.35.3.1.2.2.1	OCTET STRING	read-write	IP address or name of the 1st time server in ASCII
OCT wtWebGraphAirQualityTimeServer2	1.3.6.1.4.1.5040.1.2.35.3.1.2.2.2	OCTET STRING	read-write	IP address or name of the 2nd time server in ASCII
OCT wtWebGraphAirQualityTsEnable	1.3.6.1.4.1.5040.1.2.35.3.1.2.2.3	OCTET STRING	read-write	Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server
INT wtWebGraphAirQualityTsSyncTime	1.3.6.1.4.1.5040.1.2.35.3.1.2.2.4	INTEGER	read-write	Daily synchronisation time with the time server (hour: 0-23).
wtWebGraphAirQualityDeviceClock	1.3.6.1.4.1.5040.1.2.35.3.1.2.3
INT wtWebGraphAirQualityClockHrs	1.3.6.1.4.1.5040.1.2.35.3.1.2.3.1	INTEGER	read-write	Clock hours taking into account the time zone settings.
INT wtWebGraphAirQualityClockMin	1.3.6.1.4.1.5040.1.2.35.3.1.2.3.2	INTEGER	read-write	Clock minutes taking into account the time zone settings.
INT wtWebGraphAirQualityClockDay	1.3.6.1.4.1.5040.1.2.35.3.1.2.3.3	INTEGER	read-write	Date: Day of the month, taking into account the time zone settings.
INT wtWebGraphAirQualityClockMonth	1.3.6.1.4.1.5040.1.2.35.3.1.2.3.4	INTEGER	read-write	Date: Month, taking into account the time zone settings.
INT wtWebGraphAirQualityClockYear	1.3.6.1.4.1.5040.1.2.35.3.1.2.3.5	INTEGER	read-write	Date: Year, taking into account the time zone settings.
wtWebGraphAirQualityBasic	1.3.6.1.4.1.5040.1.2.35.3.1.3
wtWebGraphAirQualityNetwork	1.3.6.1.4.1.5040.1.2.35.3.1.3.1
IP wtWebGraphAirQualityIpAddress	1.3.6.1.4.1.5040.1.2.35.3.1.3.1.1	IpAddress	read-write	IP address of the Webio
IP wtWebGraphAirQualitySubnetMask	1.3.6.1.4.1.5040.1.2.35.3.1.3.1.2	IpAddress	read-write	Subnet mask of the Webio
IP wtWebGraphAirQualityGateway	1.3.6.1.4.1.5040.1.2.35.3.1.3.1.3	IpAddress	read-write	Gateway of the Webio
OCT wtWebGraphAirQualityDnsServer1	1.3.6.1.4.1.5040.1.2.35.3.1.3.1.4	OCTET STRING	read-write	IP address of the 1st DNS server in ASCII
OCT wtWebGraphAirQualityDnsServer2	1.3.6.1.4.1.5040.1.2.35.3.1.3.1.5	OCTET STRING	read-write	IP address of the 2nd DNS server in ASCII
OCT wtWebGraphAirQualityAddConfig	1.3.6.1.4.1.5040.1.2.35.3.1.3.1.6	OCTET STRING	read-write	Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable
wtWebGraphAirQualityHTTP	1.3.6.1.4.1.5040.1.2.35.3.1.3.2
OCT wtWebGraphAirQualityStartup	1.3.6.1.4.1.5040.1.2.35.3.1.3.2.1	OCTET STRING	read-write	Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 3: smart.htm Bit 2: user.htm Bit 1: home.htm Bit 0: index.htm Only one page may be selected at a time.
OCT wtWebGraphAirQualityGetHeaderEnable	1.3.6.1.4.1.5040.1.2.35.3.1.3.2.2	OCTET STRING	read-write	If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable
INT wtWebGraphAirQualityHttpPort	1.3.6.1.4.1.5040.1.2.35.3.1.3.2.3	INTEGER	read-write	Definition of the standard HTML port (Default: 80).
wtWebGraphAirQualityMail	1.3.6.1.4.1.5040.1.2.35.3.1.3.3
OCT wtWebGraphAirQualityMailAdName	1.3.6.1.4.1.5040.1.2.35.3.1.3.3.1	OCTET STRING	read-write	Device name for mail administration.
OCT wtWebGraphAirQualityMailReply	1.3.6.1.4.1.5040.1.2.35.3.1.3.3.2	OCTET STRING	read-write	Reply address for the mail server.
OCT wtWebGraphAirQualityMailServer	1.3.6.1.4.1.5040.1.2.35.3.1.3.3.3	OCTET STRING	read-write	Name or IP address of the mail server.
OCT wtWebioAn1MailEnable	1.3.6.1.4.1.5040.1.2.35.3.1.3.3.4	OCTET STRING	read-write	Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
OCT wtWebGraphAirQualityMailAuthentication	1.3.6.1.4.1.5040.1.2.35.3.1.3.3.5	OCTET STRING	read-write	Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication
OCT wtWebGraphAirQualityMailAuthUser	1.3.6.1.4.1.5040.1.2.35.3.1.3.3.6	OCTET STRING	read-write	Name of the user to be authenticated.
OCT wtWebGraphAirQualityMailAuthPassword	1.3.6.1.4.1.5040.1.2.35.3.1.3.3.7	OCTET STRING	read-write	Authentication password.
OCT wtWebGraphAirQualityMailPop3Server	1.3.6.1.4.1.5040.1.2.35.3.1.3.3.8	OCTET STRING	read-write	Name or Ip-address of the POP3 Servers.
wtWebGraphAirQualitySNMP	1.3.6.1.4.1.5040.1.2.35.3.1.3.4
OCT wtWebGraphAirQualitySnmpCommunityStringRead	1.3.6.1.4.1.5040.1.2.35.3.1.3.4.1	OCTET STRING	read-write	Community string read only
OCT wtWebGraphAirQualitySnmpCommunityStringReadWrite	1.3.6.1.4.1.5040.1.2.35.3.1.3.4.2	OCTET STRING	read-write	Community string read / write
OCT wtWebGraphAirQualitySystemTrapManagerIP	1.3.6.1.4.1.5040.1.2.35.3.1.3.4.3	OCTET STRING	read-write	Name or IP address of the TCP server which accepts the system trap.
OCT wtWebGraphAirQualitySystemTrapEnable	1.3.6.1.4.1.5040.1.2.35.3.1.3.4.4	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused
OCT wtWebGraphAirQualitySnmpEnable	1.3.6.1.4.1.5040.1.2.35.3.1.3.4.5	OCTET STRING	read-write	Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
OCT wtWebGraphAirQualitySnmpCommunityStringTrap	1.3.6.1.4.1.5040.1.2.35.3.1.3.4.6	OCTET STRING	read-write	Community string send within traps.
wtWebGraphAirQualityUDP	1.3.6.1.4.1.5040.1.2.35.3.1.3.5
INT wtWebGraphAirQualityUdpPort	1.3.6.1.4.1.5040.1.2.35.3.1.3.5.1	INTEGER	read-write	Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device.
OCT wtWebGraphAirQualityUdpEnable	1.3.6.1.4.1.5040.1.2.35.3.1.3.5.2	OCTET STRING	read-write	Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable
wtWebGraphAirQualitySyslog	1.3.6.1.4.1.5040.1.2.35.3.1.3.6
OCT wtWebGraphAirQualitySyslogServerIP	1.3.6.1.4.1.5040.1.2.35.3.1.3.6.1	OCTET STRING	read-write	Name or IP address of the Syslog server, which accepts the Syslog messgaes.
INT wtWebGraphAirQualitySyslogServerPort	1.3.6.1.4.1.5040.1.2.35.3.1.3.6.2	INTEGER	read-write	Portnumber of the Syslog servers, default 514.
OCT wtWebGraphAirQualitySyslogSystemMessagesEnable	1.3.6.1.4.1.5040.1.2.35.3.1.3.6.3	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused
OCT wtWebGraphAirQualitySyslogEnable	1.3.6.1.4.1.5040.1.2.35.3.1.3.6.4	OCTET STRING	read-write	Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable
wtWebGraphAirQualityFTP	1.3.6.1.4.1.5040.1.2.35.3.1.3.7
OCT wtWebGraphAirQualityFTPServerIP	1.3.6.1.4.1.5040.1.2.35.3.1.3.7.1	OCTET STRING	read-write	Name or IP address of the FTP server, which accepts the FTP messages.
INT wtWebGraphAirQualityFTPServerControlPort	1.3.6.1.4.1.5040.1.2.35.3.1.3.7.2	INTEGER	read-write	Portnumber of the control port of the FTP server, default 21.
OCT wtWebGraphAirQualityFTPUserName	1.3.6.1.4.1.5040.1.2.35.3.1.3.7.3	OCTET STRING	read-write	FTP Loggin: user name.
OCT wtWebGraphAirQualityFTPPassword	1.3.6.1.4.1.5040.1.2.35.3.1.3.7.4	OCTET STRING	read-write	FTP Loggin: user password.
OCT wtWebGraphAirQualityFTPAccount	1.3.6.1.4.1.5040.1.2.35.3.1.3.7.5	OCTET STRING	read-write	FTP Loggin: name of account.
OCT wtWebGraphAirQualityFTPOption	1.3.6.1.4.1.5040.1.2.35.3.1.3.7.6	OCTET STRING	read-write	Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable
OCT wtWebGraphAirQualityFTPEnable	1.3.6.1.4.1.5040.1.2.35.3.1.3.7.7	OCTET STRING	read-write	Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable
wtWebGraphAirQualityRSS	1.3.6.1.4.1.5040.1.2.35.3.1.3.8
OCT wtWebGraphAirQualityRSSChannelTitle	1.3.6.1.4.1.5040.1.2.35.3.1.3.8.1	OCTET STRING	read-write	Name of the RSS Feed.
OCT wtWebGraphAirQualityRSSChannelLink	1.3.6.1.4.1.5040.1.2.35.3.1.3.8.2	OCTET STRING	read-write	Link of the RSS Feed.
OCT wtWebGraphAirQualityRSSChannelDescription	1.3.6.1.4.1.5040.1.2.35.3.1.3.8.3	OCTET STRING	read-write	Description of the RSS Feed.
OCT wtWebGraphAirQualityRSSChannelImage	1.3.6.1.4.1.5040.1.2.35.3.1.3.8.4	OCTET STRING	read-write	Link of a picture, which will be shown at the headline of the output window.
OCT wtWebGraphAirQualityRSSChannelImageTitle	1.3.6.1.4.1.5040.1.2.35.3.1.3.8.5	OCTET STRING	read-write	Alias Name of the picture.
OCT wtWebGraphAirQualityRSSChannelImageLink	1.3.6.1.4.1.5040.1.2.35.3.1.3.8.6	OCTET STRING	read-write	Link, which can be selected by clicking on the picture.
OCT wtWebGraphAirQualityRSSChannelItemTitle	1.3.6.1.4.1.5040.1.2.35.3.1.3.8.7	OCTET STRING	read-write	Title of the RSS Feed.
OCT wtWebGraphAirQualityRSSChannelItemLink	1.3.6.1.4.1.5040.1.2.35.3.1.3.8.8	OCTET STRING	read-write	Link of the RSS Feed.
OCT wtWebGraphAirQualityRSSChannelItemDescription	1.3.6.1.4.1.5040.1.2.35.3.1.3.8.9	OCTET STRING	read-write	Text of the RSS Feed.
OCT wtWebGraphAirQualityRSSChannelItemQuantity	1.3.6.1.4.1.5040.1.2.35.3.1.3.8.10	OCTET STRING	read-write	Number of lines.
wtWebGraphAirQualityLedLights	1.3.6.1.4.1.5040.1.2.35.3.1.3.9
OCT wtWebGraphAirQualityLedLightsSensorSel	1.3.6.1.4.1.5040.1.2.35.3.1.3.9.1	OCTET STRING	read-write	Binary coded trigger conditions, only one sensor may be selected at a time: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Sensor 1 Temperature Bit 1 : Sensor 2 Humidity Bit 2 : Sensor 3 VOC Bit 3-7: unused
OCT wtWebGraphAirQualityLedLightsLimitGreen	1.3.6.1.4.1.5040.1.2.35.3.1.3.9.2	OCTET STRING	read-write	Limit to switch on green LED
OCT wtWebGraphAirQualityLedLightsLimitYellow	1.3.6.1.4.1.5040.1.2.35.3.1.3.9.3	OCTET STRING	read-write	Limit to switch on yellow LED
OCT wtWebGraphAirQualityLedLightsLimitRed	1.3.6.1.4.1.5040.1.2.35.3.1.3.9.4	OCTET STRING	read-write	Limit to switch on red LED
wtWebGraphAirQualityDatalogger	1.3.6.1.4.1.5040.1.2.35.3.1.4
INT wtWebGraphAirQualityLoggerTimebase	1.3.6.1.4.1.5040.1.2.35.3.1.4.1	INTEGER	read-write	Time base of the data logger
OCT wtWebGraphAirQualityLoggerSensorSel	1.3.6.1.4.1.5040.1.2.35.3.1.4.2	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Sensor 1 Temperature Bit 1 : Sensor 2 Humidity Bit 2 : Sensor 3 VOC Bit 3-7: unused
wtWebGraphAirQualityAlarm	1.3.6.1.4.1.5040.1.2.35.3.1.5
INT wtWebGraphAirQualityAlarmCount	1.3.6.1.4.1.5040.1.2.35.3.1.5.1	INTEGER	read-only	Number of independent alarms.
wtWebGraphAirQualityAlarmIfTable	1.3.6.1.4.1.5040.1.2.35.3.1.5.2		not-accessible	List of alarm indices.
wtWebGraphAirQualityAlarmIfEntry	1.3.6.1.4.1.5040.1.2.35.3.1.5.2.1		not-accessible	Numbers of the alarms.
INT wtWebGraphAirQualityAlarmNo	1.3.6.1.4.1.5040.1.2.35.3.1.5.2.1.1	INTEGER	read-only	Alarm number.
wtWebGraphAirQualityAlarmTable	1.3.6.1.4.1.5040.1.2.35.3.1.5.3		not-accessible	List of settings depending on the alarm number.
wtWebGraphAirQualityAlarmEntry	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1		not-accessible	Alarm parameters of the individual alarms.
OCT wtWebGraphAirQualityAlarmTrigger	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.1	OCTET STRING	read-write	Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
OCT wtWebGraphAirQualityAlarmMin	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.2	OCTET STRING	read-write	Minimum temperature in degrees with maximum 2 decimal places.
OCT wtWebGraphAirQualityAlarmMax	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.3	OCTET STRING	read-write	Maximum temperature in degrees with maximum 2 decimal places.
OCT wtWebGraphAirQualityAlarmHysteresis	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.4	OCTET STRING	read-write	Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.
OCT wtWebGraphAirQualityAlarmDelay	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.5	OCTET STRING	read-write	Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).
OCT wtWebGraphAirQualityAlarmInterval	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.6	OCTET STRING	read-write	Send interval for alarm messages.
OCT wtWebGraphAirQualityAlarmEnable	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.7	OCTET STRING	read-write	Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable
OCT wtWebGraphAirQualityAlarmEMailAddr	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.8	OCTET STRING	read-write	E-Mail address for sending the alarm mail to.
OCT wtWebGraphAirQualityAlarmMailSubject	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.9	OCTET STRING	read-write	Subject line for alarm mail.
OCT wtWebGraphAirQualityAlarmMailText	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.10	OCTET STRING	read-write	Alarm mail text: provides the current temperature; n = 1..8. provides the current time.
OCT wtWebGraphAirQualityAlarmManagerIP	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.11	OCTET STRING	read-write	Name or IP address of the SNMP Manager which accepts the trap.
OCT wtWebGraphAirQualityAlarmTrapText	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.12	OCTET STRING	read-write	This text is sent in the trap body.
OCT wtWebGraphAirQualityAlarmMailOptions	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.13	OCTET STRING	read-write	Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused
OCT wtWebGraphAirQualityAlarmTcpIpAddr	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.14	OCTET STRING	read-write	Name or IP address of the TCP server which accepts the trap.
INT wtWebGraphAirQualityAlarmTcpPort	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.15	INTEGER	read-write	Port number of the TCP server which accepts the trap.
OCT wtWebGraphAirQualityAlarmTcpText	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.16	OCTET STRING	read-write	This text is sent in the TCP trap body.
OCT wtWebGraphAirQualityAlarmClearMailSubject	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.17	OCTET STRING	read-write	Subject line for alarm clear mail.
OCT wtWebGraphAirQualityAlarmClearMailText	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.18	OCTET STRING	read-write	Alarm clear mail text: provides the current temperature; n = 1..8. provides the current time.
OCT wtWebGraphAirQualityAlarmClearTrapText	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.19	OCTET STRING	read-write	This text is sent in the trap body.
OCT wtWebGraphAirQualityAlarmClearTcpText	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.20	OCTET STRING	read-write	This text is sent in the TCP trap body.
OCT wtWebGraphAirQualityAlarmDeltaTemp	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.21	OCTET STRING	read-write	Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes.
OCT wtWebGraphAirQualityAlarmRHMin	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.22	OCTET STRING	read-write	Minimum rel. Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphAirQualityAlarmRHMax	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.23	OCTET STRING	read-write	Maximum rel.Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphAirQualityAlarmRHHysteresis	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.24	OCTET STRING	read-write	Hysteresis of rel. Humidity in percent with maximum 2 decimal places.
OCT wtWebGraphAirQualityAlarmAHMin	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.25	OCTET STRING	read-write	Minimum abs. Humidity in g/(mmm) with maximum 2 decimal places.
OCT wtWebGraphAirQualityAlarmAHMax	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.26	OCTET STRING	read-write	Maximum abs. Humidity in g/(mmm) with maximum 2 decimal places.
IP wtWebGraphAirQualityAlarmSyslogIpAddr	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.27	IpAddress	read-write	IP address of the syslog server to which the Webio device should send syslog messages.
INT wtWebGraphAirQualityAlarmSyslogPort	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.28	INTEGER	read-write	Port number of the syslog server to which the Webio device should send syslog messages.
OCT wtWebGraphAirQualityAlarmSyslogText	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.29	OCTET STRING	read-write	Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
OCT wtWebGraphAirQualityAlarmSyslogClearText	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.30	OCTET STRING	read-write	Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
OCT wtWebGraphAirQualityAlarmFtpDataPort	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.31	OCTET STRING	read-write	Local data port: 1..65535 or AUTO: the next free port will be assigned.
OCT wtWebGraphAirQualityAlarmFtpFileName	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.32	OCTET STRING	read-write	Name of the file including path informations.
OCT wtWebGraphAirQualityAlarmFtpText	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.33	OCTET STRING	read-write	Message text to store on the FTP server.
OCT wtWebGraphAirQualityAlarmFtpClearText	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.34	OCTET STRING	read-write	Alarm clear message to store on the FTP server.
OCT wtWebGraphAirQualityAlarmFtpOption	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.35	OCTET STRING	read-write	Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
OCT wtWebGraphAirQualityAlarmTimerCron	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.36	OCTET STRING	read-write	This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute).
OCT wtWebGraphAirQualityAlarmVocMax	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.37	OCTET STRING	read-write	Maximum VOC in ppm with maximum 2 decimal places.
OCT wtWebGraphAirQualityAlarmVocHysteresis	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.38	OCTET STRING	read-write	Hysteresis of VOC in ppm with maximum 2 decimal places.
OCT wtWebGraphAirQualityAlarmName	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.39	OCTET STRING	read-write	Alert name
OCT wtWebGraphAirQualityAlarmActive	1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.40	OCTET STRING	read-write	Alert active 1 = ON 0 = OFF
wtWebGraphAirQualityGraphics	1.3.6.1.4.1.5040.1.2.35.3.1.6
wtWebGraphAirQualityGraphicsBase	1.3.6.1.4.1.5040.1.2.35.3.1.6.1
OCT wtWebGraphAirQualityGraphicsBaseEnable	1.3.6.1.4.1.5040.1.2.35.3.1.6.1.1	OCTET STRING	read-write	Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused
INT wtWebGraphAirQualityGraphicsBaseWidth	1.3.6.1.4.1.5040.1.2.35.3.1.6.1.2	INTEGER	read-write	Defines the width of the graphic in pixels.
INT wtWebGraphAirQualityGraphicsBaseHeight	1.3.6.1.4.1.5040.1.2.35.3.1.6.1.3	INTEGER	read-write	Defines the height of the graphic in pixels.
OCT wtWebGraphAirQualityGraphicsBaseFrameColor	1.3.6.1.4.1.5040.1.2.35.3.1.6.1.4	OCTET STRING	read-write	Frame color definition in RGB.
OCT wtWebGraphAirQualityGraphicsBaseBackgroundColor	1.3.6.1.4.1.5040.1.2.35.3.1.6.1.5	OCTET STRING	read-write	Background color definition in RGB.
INT wtWebGraphAirQualityGraphicsBasePollingrate	1.3.6.1.4.1.5040.1.2.35.3.1.6.1.6	INTEGER	read-write	Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic.
wtWebGraphAirQualityGraphicsSelect	1.3.6.1.4.1.5040.1.2.35.3.1.6.2
OCT wtWebGraphAirQualityGraphicsSelectDisplaySensorSel	1.3.6.1.4.1.5040.1.2.35.3.1.6.2.1	OCTET STRING	read-write	Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3-7: unused
OCT wtWebGraphAirQualityGraphicsSelectDisplayShowExtrem	1.3.6.1.4.1.5040.1.2.35.3.1.6.2.2	OCTET STRING	read-write	Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3-7: unused
wtWebGraphAirQualitySensorColorTable	1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3		not-accessible	List of sensor colors for the praphical presentation.
wtWebGraphAirQualitySensorColorEntry	1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3.1		not-accessible	Numbers of the sensors.
OCT wtWebGraphAirQualityGraphicsSensorColor	1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3.1.1	OCTET STRING	read-write	Color of the sensors at the praphical presention.
OCT wtWebGraphAirQualityGraphicsSelectScale	1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3.1.2	OCTET STRING	read-write	Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3-7: unused
wtWebGraphAirQualityGraphicsScale	1.3.6.1.4.1.5040.1.2.35.3.1.6.3
OCT wtWebGraphAirQualityGraphicsScaleAutoScaleEnable	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.1	OCTET STRING	read-write	Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 : Scale 3 Auto scale enable Bit 3-7: unused
OCT wtWebGraphAirQualityGraphicsScaleAutoFitEnable	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.2	OCTET STRING	read-write	Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Scale 3 Auto fit enable Bit 3-7: unused
INT wtWebGraphAirQualityGraphicsScale1Min	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.3	INTEGER	read-only	Scale 1: Minimum.
INT wtWebGraphAirQualityGraphicsScale2Min	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.4	INTEGER	read-only	Scale 2: Minimum.
INT wtWebGraphAirQualityGraphicsScale3Min	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.5	INTEGER	read-only	Scale 3: Minimum.
INT wtWebGraphAirQualityGraphicsScale4Min	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.6	INTEGER	read-only	Scale 4: Minimum.
INT wtWebGraphAirQualityGraphicsScale1Max	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.7	INTEGER	read-only	Scale 1: Maximum.
INT wtWebGraphAirQualityGraphicsScale2Max	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.8	INTEGER	read-only	Scale 2: Maximum.
INT wtWebGraphAirQualityGraphicsScale3Max	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.9	INTEGER	read-only	Scale 3: Maximum.
INT wtWebGraphAirQualityGraphicsScale4Max	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.10	INTEGER	read-only	Scale 4: Maximum.
OCT wtWebGraphAirQualityGraphicsScale1Unit	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.11	OCTET STRING	read-only	Scale 1: Unit.
OCT wtWebGraphAirQualityGraphicsScale2Unit	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.12	OCTET STRING	read-only	Scale 2: Unit.
OCT wtWebGraphAirQualityGraphicsScale3Unit	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.13	OCTET STRING	read-only	Scale 3: Unit.
OCT wtWebGraphAirQualityGraphicsScale4Unit	1.3.6.1.4.1.5040.1.2.35.3.1.6.3.14	OCTET STRING	read-only	Scale 4: Unit.
wtWebGraphAirQualityPorts	1.3.6.1.4.1.5040.1.2.35.3.2
wtWebGraphAirQualityPortTable	1.3.6.1.4.1.5040.1.2.35.3.2.1		not-accessible	List of settings depending on the sensor number.
wtWebGraphAirQualityPortEntry	1.3.6.1.4.1.5040.1.2.35.3.2.1.1		not-accessible	Sensor parameters for the individual sensors.
OCT wtWebGraphAirQualityPortName	1.3.6.1.4.1.5040.1.2.35.3.2.1.1.1	OCTET STRING	read-write	Name of the sensor.
OCT wtWebGraphAirQualityPortText	1.3.6.1.4.1.5040.1.2.35.3.2.1.1.2	OCTET STRING	read-write	Description of the sensor.
OCT wtWebGraphAirQualityPortOffset1	1.3.6.1.4.1.5040.1.2.35.3.2.1.1.3	OCTET STRING	read-write	Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.
OCT wtWebGraphAirQualityPortTemperature1	1.3.6.1.4.1.5040.1.2.35.3.2.1.1.4	OCTET STRING	read-write	Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.
OCT wtWebGraphAirQualityPortOffset2	1.3.6.1.4.1.5040.1.2.35.3.2.1.1.5	OCTET STRING	read-write	Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.
OCT wtWebGraphAirQualityPortTemperature2	1.3.6.1.4.1.5040.1.2.35.3.2.1.1.6	OCTET STRING	read-write	Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.
OCT wtWebGraphAirQualityPortComment	1.3.6.1.4.1.5040.1.2.35.3.2.1.1.7	OCTET STRING	read-write	Offset calibration: informations of date, name of operator, reference devices.
wtWebGraphAirQualityManufact	1.3.6.1.4.1.5040.1.2.35.3.3
OCT wtWebGraphAirQualityMfName	1.3.6.1.4.1.5040.1.2.35.3.3.1	OCTET STRING	read-write	Manufacturer company name
OCT wtWebGraphAirQualityMfAddr	1.3.6.1.4.1.5040.1.2.35.3.3.2	OCTET STRING	read-write	Manufacturer address.
OCT wtWebGraphAirQualityMfHotline	1.3.6.1.4.1.5040.1.2.35.3.3.3	OCTET STRING	read-write	Manufacturer hotline.
OCT wtWebGraphAirQualityMfInternet	1.3.6.1.4.1.5040.1.2.35.3.3.4	OCTET STRING	read-write	Manufacturer Internet address.
OCT wtWebGraphAirQualityMfDeviceTyp	1.3.6.1.4.1.5040.1.2.35.3.3.5	OCTET STRING	read-write	Manufacturer device name (model number).
OCT wtWebGraphAirQualityMfOrderNo	1.3.6.1.4.1.5040.1.2.35.3.3.6	OCTET STRING	read-write	Manufacturer part number.
wtWebGraphAirQualityDiag	1.3.6.1.4.1.5040.1.2.35.4
INT wtWebGraphAirQualityDiagErrorCount	1.3.6.1.4.1.5040.1.2.35.4.1	INTEGER	read-only	Number of entries in the error memory.
OCT wtWebGraphAirQualityDiagBinaryError	1.3.6.1.4.1.5040.1.2.35.4.2	OCTET STRING	read-only	Error causes coded bit-by-bit.
INT wtWebGraphAirQualityDiagErrorIndex	1.3.6.1.4.1.5040.1.2.35.4.3	INTEGER	read-write	The value of this variable is used as an index to read an error massege from wtWebGraphAirQualityDiagErrorMessage. Errors are numbered from 1 to wtWebGraphAirQualityDiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphAirQualityDiagErrorMessage.
OCT wtWebGraphAirQualityDiagErrorMessage	1.3.6.1.4.1.5040.1.2.35.4.4	OCTET STRING	read-only	Using wtWebGraphAirQualityDiagErrorIndex as an index, the appropriate message is available.
INT wtWebGraphAirQualityDiagErrorClear	1.3.6.1.4.1.5040.1.2.35.4.5	INTEGER	write-only	Writing 1 into this variable clears all diagnosis messages.

RFC description

Manages air quality monitoring sensors and configurations in WebGraph environmental monitoring systems.

Start monitoring WebGraph networked environmental/air-quality sensor appliance (per-sensor reading/threshold-alarm status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WebGraph-Air-Quality-US-MIB

What Is WebGraph-Air-Quality-US-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description