All MIBs › WebGraph-Air-Quality-US-MIB › wtWebioAn1MailEnable
wtWebioAn1MailEnable
Module: WebGraph-Air-Quality-US-MIB
OID (symbolic): WebGraph-Air-Quality-US-MIB::wtWebioAn1MailEnable
OID (numeric): 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
What is wtWebioAn1MailEnable?
A bitmask in the fourth octet whose bit 0 enables or disables the sending of mail from this device entirely. Note the object's own name uses the older "wtWebioAn1" prefix rather than the "wtWebGraphAirQuality" prefix used by its sibling mail objects, though it lives in the same wtWebGraphAirQualityMail subtree. Admins turn this off temporarily when doing bulk configuration changes that would otherwise trigger a flood of alert emails.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.4 snmpwalk -v2c -c public <target> WebGraph-Air-Quality-US-MIB::wtWebioAn1MailEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.4.1 snmpget -v2c -c public <target> WebGraph-Air-Quality-US-MIB::wtWebioAn1MailEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.4.1 s <value>
Start monitoring WebGraph networked environmental/air-quality sensor appliance (per-sensor reading/threshold-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-Air-Quality-US-MIB::wtWebioAn1MailEnable OID value, configure state conditions and alerts, and monitor any WebGraph networked environmental/air-quality sensor appliance (per-sensor reading/threshold-alarm status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.35 | wtWebGraphAirQuality | WebGraph-Air-Quality-US-MIB |
| 1.3.6.1.4.1.5040.1.2.35.3 | wtWebGraphAirQualityConfig | WebGraph-Air-Quality-US-MIB |
| 1.3.6.1.4.1.5040.1.2.35.3.1 | wtWebGraphAirQualityDevice | WebGraph-Air-Quality-US-MIB |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3 | wtWebGraphAirQualityBasic | WebGraph-Air-Quality-US-MIB |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3 | wtWebGraphAirQualityMail | WebGraph-Air-Quality-US-MIB |
| 1.3.6.1.4.1.5040.1.2.35.3.1.3.3.4 | wtWebioAn1MailEnable | WebGraph-Air-Quality-US-MIB |