WebGraph-Air-Quality-US-MIB :: wtWebGraphAirQualitySessCntrlLogout

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WebGraph-Air-Quality-US-MIB › wtWebGraphAirQualitySessCntrlLogout

wtWebGraphAirQualitySessCntrlLogout

Module: WebGraph-Air-Quality-US-MIB

OID (symbolic): WebGraph-Air-Quality-US-MIB::wtWebGraphAirQualitySessCntrlLogout

OID (numeric): 1.3.6.1.4.1.5040.1.2.35.2.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.

What is wtWebGraphAirQualitySessCntrlLogout?

Write target used to end an open configuration session: writing 1 closes the session and saves all changed parameters, while writing 2 discards them instead. Reading this object always returns 0. Admins must remember to write one of these values when finished configuring, since the session was opened by supplying a password to wtWebGraphAirQualitySessCntrlPassword.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.35.2.3
snmpwalk -v2c -c public <target> WebGraph-Air-Quality-US-MIB::wtWebGraphAirQualitySessCntrlLogout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.35.2.3.1
snmpget -v2c -c public <target> WebGraph-Air-Quality-US-MIB::wtWebGraphAirQualitySessCntrlLogout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.35.2.3.1 i <value>

Start monitoring WebGraph networked environmental/air-quality sensor appliance (per-sensor reading/threshold-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-Air-Quality-US-MIB::wtWebGraphAirQualitySessCntrlLogout OID value, configure state conditions and alerts, and monitor any WebGraph networked environmental/air-quality sensor appliance (per-sensor reading/threshold-alarm status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5040wutCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1wtComServerCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.2wtWebioWebGraph-8xThermometer-US-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5040.1.2.35wtWebGraphAirQualityWebGraph-Air-Quality-US-MIB
1.3.6.1.4.1.5040.1.2.35.2wtWebGraphAirQualitySessCntrlWebGraph-Air-Quality-US-MIB
1.3.6.1.4.1.5040.1.2.35.2.3wtWebGraphAirQualitySessCntrlLogoutWebGraph-Air-Quality-US-MIB