| OID symbolic | OID numeric | Type | Access | Description |
|---|
| wwpLeosSyslogCollectorMIB | 1.3.6.1.4.1.6141.2.60.21 | | | A MIB module to manage syslog collectors on the
LEOS based WWP products. |
| wwpLeosSyslogCollMIBObjects | 1.3.6.1.4.1.6141.2.60.21.1 | | | |
| wwpLeosSyslogSystem | 1.3.6.1.4.1.6141.2.60.21.1.1 | | | |
| T/F wwpLeosSyslogEnable | 1.3.6.1.4.1.6141.2.60.21.1.1.1 | TruthValue | read-write | Specifies whether or not the syslog client is enabled.
This is the system wide parameter and will overwrite
any collector specific managed object to enable
or disable the syslog client. |
| wwpLeosSyslogColl | 1.3.6.1.4.1.6141.2.60.21.1.2 | | | |
| wwpLeosSyslogCollectorTable | 1.3.6.1.4.1.6141.2.60.21.1.2.1 | | not-accessible | A table containing Syslog collector information.
To create entries in this table use SNMP multiple set
operation.
wwpLeosSyslogCollectorAddr, wwpLeosSyslogIndex and
wwpLeosSyslogCollectorStatus are required fields
that needs to be set to create entry.
To delete entry set wwpLeosSyslogCollectorStatus to destroy. |
| wwpLeosSyslogCollectorEntry | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1 | | not-accessible | Defines the information pertaining to a syslog collector
to which a syslog messages will be relayed.
Entries within this table with an access level of read-
create MUST be considered non-volatile and MUST be
maintained across entity resets. |
| I32 wwpLeosSyslogIndex | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.1 | Integer32 | not-accessible | Specifies the unique index used to represent each row in the table. |
| STR wwpLeosSyslogCollectorAddr | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.2 | DisplayString | read-create | The address for the Syslog message collector.
It can be Host Name or IP Address. |
| IP wwpLeosSyslogCollectorResolvedAddr | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.3 | IpAddress | read-only | When wwpLeosSyslogCollectorAddr represents:
Host name : The resolved address will either be Ipv4 address or Ipv6 address.
Ipv4 address : The resolved address will be the same Ipv4 address.
Ipv6 address : The resolved address will be the same Ipv6 address.
When the resolved address represents:
Ipv4 address : wwpLeosSyslogCollectorResolvedAddr will represent the resolved Ipv4 address.
wwpLeosSyslogCollectorResolvedInetAddr used in conjunction with wwpLeosSyslogCollectorResolvedInetAddrType
will represent the same Ipv4 address.
Ipv6 address : wwpLeosSyslogCollectorResolvedAddr will represent 0.0.0.0.
wwpLeosSyslogCollectorResolvedInetAddr used in conjunction with wwpLeosSyslogCollectorResolvedInetAddrType
will represent the Ipv6 address. |
| I32 wwpLeosSyslogCollectorUDPPort | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.4 | Integer32 | read-create | The port number on the destination to which the
syslog message will be forwarded over the udp
transport. |
| SYS wwpLeosSyslogCollectorFacility | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.5 | SyslogFacility | read-create | The syslog facility code that will be added to the messages forwarded
to this collector. |
| SYS wwpLeosSyslogCollectorMinSeverity | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.6 | SyslogSeverity | read-create | Any syslog message with a severity less than the severity
specified by this object will be ignored by the collector.
note: severity level numeric values increase as their severity
decreases, e.g. error(3) is more severe than debug(7). |
| SYS wwpLeosSyslogCollectorMaxSeverity | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.7 | SyslogSeverity | read-create | Any syslog message with a severity greater than the severity
specified by this object will be ignored by the collector.
note: severity level numeric values increase as their severity
decreases, e.g. error(3) is more severe than debug(7). |
| INT wwpLeosSyslogCollectorUserAdminState | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.8 | INTEGER | read-create | Specifies the admin state of the wwpLeosSyslogCollectorAddr
configured by user. |
| INT wwpLeosSyslogCollectorDhcpAdminState | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.9 | INTEGER | read-only | Specifies the admin state of the wwpLeosSyslogCollectorAddr
configured by DHCP. |
| INT wwpLeosSyslogCollectorOperState | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.10 | INTEGER | read-only | Specifies the operational state of the wwpLeosSyslogCollectorAddr. |
| ROW wwpLeosSyslogCollectorStatus | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.11 | RowStatus | read-create | Used to manage the creation and deletion of the conceptual rows in this table.
To create a row in this table, a manager must set this object to 'createAndGo'
and specify at least wwpLeosSyslogIndex and wwpLeosSyslogCollectorAddr.
To delete the entry set this object to 'destroy'. |
| STR wwpLeosSyslogCollectorCustomPrefix | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.12 | DisplayString | read-create | Specifies the syslog custom prefix that will be prepended to all syslog log messages
before device sends syslog messages to syslog collectors. |
| IPt wwpLeosSyslogCollectorResolvedInetAddrType | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.13 | InetAddressType | read-only | Specifies the resolved IP address type . Used in conjunction with
wwpLeosSyslogCollectorResolvedInetAddress.
When set to :
ipv4 : wwpLeosSyslogCollectorResolvedInetAddress should be compliant with
InetAddressIPv4
ipv6 : wwpLeosSyslogCollectorResolvedInetAddress should be compliant with
InetAddressIPv6 |
| IP wwpLeosSyslogCollectorResolvedInetAddress | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.14 | InetAddress | read-only | Specifies the resolved ip address for given wwpLeosSyslogCollectorAddr.
If wwpLeosSyslogCollectorAddr is set to host name then
wwpLeosSyslogCollectorResolvedInetAddr will display the resolved IP address.
If wwpLeosSyslogCollectorAddr is set to IP address then
wwpLeosSyslogCollectorResolvedInetAddr will display same value as
wwpLeosSyslogCollectorAddr. This OID should be used in conjuction
with wwpLeosSyslogCollectorResolvedInetAddrType. |
| wwpLeosSyslogCollectorSeverityTable | 1.3.6.1.4.1.6141.2.60.21.1.2.2 | | not-accessible | A table containing Syslog collector severity information.
To create entries in this table following objects must be specified.
- Indexes must be specified
-
To delete entry set wwpLeosSyslogCollectorStatus to destroy. |
| wwpLeosSyslogCollectorSeverityEntry | 1.3.6.1.4.1.6141.2.60.21.1.2.2.1 | | not-accessible | Defines the information pertaining to a syslog collector severity
to which a syslog messages will be relayed. Syslog Collector will
only receive messages of severity that exist in this table. |
| SYS wwpLeosSyslogCollectorSeverity | 1.3.6.1.4.1.6141.2.60.21.1.2.2.1.1 | SyslogSeverity | not-accessible | This mib object specifies the severity of the syslog message that this collector
should receive. |
| ROW wwpLeosSyslogCollectorSeverityRowStatus | 1.3.6.1.4.1.6141.2.60.21.1.2.2.1.2 | RowStatus | read-create | Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'.
To delete the entry set this to 'destroy'. |
| wwpLeosSyslogCollMIBNotificationPrefix | 1.3.6.1.4.1.6141.2.60.21.2 | | | |
| wwpLeosSyslogCollMIBNotifications | 1.3.6.1.4.1.6141.2.60.21.2.0 | | | |
| wwpLeosSyslogCollMIBConformance | 1.3.6.1.4.1.6141.2.60.21.3 | | | |
| wwpLeosSyslogCollMIBCompliances | 1.3.6.1.4.1.6141.2.60.21.3.1 | | | |
| wwpLeosSyslogCollMIBGroups | 1.3.6.1.4.1.6141.2.60.21.3.2 | | | |
