All MIBs › WWP-LEOS-SYSLOG-COLLECTOR-MIB › wwpLeosSyslogCollectorResolvedInetAddress
wwpLeosSyslogCollectorResolvedInetAddress
Module: WWP-LEOS-SYSLOG-COLLECTOR-MIB
OID (symbolic): WWP-LEOS-SYSLOG-COLLECTOR-MIB::wwpLeosSyslogCollectorResolvedInetAddress
OID (numeric): 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.14
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-only
Description: Specifies the resolved ip address for given wwpLeosSyslogCollectorAddr. If wwpLeosSyslogCollectorAddr is set to host name then wwpLeosSyslogCollectorResolvedInetAddr will display the resolved IP address. If wwpLeosSyslogCollectorAddr is set to IP address then wwpLeosSyslogCollectorResolvedInetAddr will display same value as wwpLeosSyslogCollectorAddr. This OID should be used in conjuction with wwpLeosSyslogCollectorResolvedInetAddrType.
What is wwpLeosSyslogCollectorResolvedInetAddress?
This read-only object reports the resolved IP address for the configured collector, handling both IPv4 and IPv6 depending on wwpLeosSyslogCollectorResolvedInetAddrType, and per the description if the configured address was already an IP address, this object simply mirrors it. Admins read it to confirm what address the device actually resolved and is sending syslog traffic to, especially for IPv6 collectors not representable in the legacy IPv4-only resolved-address object. When a collector is configured with a hostname, this object shows the admin the actual resolved address (IPv4 or IPv6, per the type object) currently in use for that collector.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.14 snmpwalk -v2c -c public <target> WWP-LEOS-SYSLOG-COLLECTOR-MIB::wwpLeosSyslogCollectorResolvedInetAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.14.1 snmpget -v2c -c public <target> WWP-LEOS-SYSLOG-COLLECTOR-MIB::wwpLeosSyslogCollectorResolvedInetAddress.1
Start monitoring Ciena/World Wide Packets Metro Ethernet switch (syslog collector destination/facility-filter config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-SYSLOG-COLLECTOR-MIB::wwpLeosSyslogCollectorResolvedInetAddress OID value, configure state conditions and alerts, and monitor any Ciena/World Wide Packets Metro Ethernet switch (syslog collector destination/facility-filter config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.21 | wwpLeosSyslogCollectorMIB | WWP-LEOS-SYSLOG-COLLECTOR-MIB |
| 1.3.6.1.4.1.6141.2.60.21.1 | wwpLeosSyslogCollMIBObjects | WWP-LEOS-SYSLOG-COLLECTOR-MIB |
| 1.3.6.1.4.1.6141.2.60.21.1.2 | wwpLeosSyslogColl | WWP-LEOS-SYSLOG-COLLECTOR-MIB |
| 1.3.6.1.4.1.6141.2.60.21.1.2.1 | wwpLeosSyslogCollectorTable | WWP-LEOS-SYSLOG-COLLECTOR-MIB |
| 1.3.6.1.4.1.6141.2.60.21.1.2.1.1 | wwpLeosSyslogCollectorEntry | WWP-LEOS-SYSLOG-COLLECTOR-MIB |
| 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.14 | wwpLeosSyslogCollectorResolvedInetAddress | WWP-LEOS-SYSLOG-COLLECTOR-MIB |