All MIBs › WWP-LEOS-BENCHMARK-MIB
Organization: Ciena, Inc
Last Updated: 2012-02-13
Category: Ciena LEOS Carrier Ethernet
Description: Manages Ciena LEOS network benchmarking test configuration and performance measurement results.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is WWP-LEOS-BENCHMARK-MIB?
WWP-LEOS-BENCHMARK-MIB is a Ciena LEOS (formerly World Wide Packets) proprietary MIB used to configure and run network benchmarking tests and to expose the resulting performance measurements. It covers configuration data for test parameters (such as test type, duration, and target) alongside result/performance data like throughput or latency measurements from completed benchmark runs. Its monitoring value is in performance validation rather than fault detection — it lets an operator confirm a link or path meets expected throughput/latency targets, which is a software-driven diagnostic function rather than a report of hardware component health. It is a vendor-proprietary test harness with no indicated dependency on standard IETF performance MIBs. It is deployed on Ciena LEOS Metro Ethernet devices during commissioning or troubleshooting to validate network performance. Engineers can download the WWP-LEOS-BENCHMARK-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-LEOS-BENCHMARK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Ciena LEOS / World Wide Packets Metro Ethernet device
Monitoring Examples
No sample object names were supplied for this module; based on the description, the relevant objects would be a benchmark test configuration entry (test type, target, duration) and a corresponding results object holding measured throughput/latency. An admin would trigger a benchmark test via configuration objects and then poll the results object to confirm the measured throughput meets the service level agreement, with a result well below target indicating a link-layer performance problem.
What Can Be Monitored
- benchmark test configuration
- test type and duration
- measured throughput/latency results
- test completion status
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Counter64 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| TEXTUAL-CONVENTION | |
| TruthValue |
From WWP-SMI
| wwpModulesLeos | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| wwpLeosBenchmarkMIB | 1.3.6.1.4.1.6141.2.60.43 | The MIB module for monitoring benchmark testing. | ||
| wwpLeosBenchmarkMIBObjects | 1.3.6.1.4.1.6141.2.60.43.1 | |||
| wwpLeosBenchmarkModule | 1.3.6.1.4.1.6141.2.60.43.1.1 | |||
| INT wwpLeosBenchmarkRole | 1.3.6.1.4.1.6141.2.60.43.1.1.1 | INTEGER | read-write | System level benchmark role |
| INT wwpLeosBenchmarkPort | 1.3.6.1.4.1.6141.2.60.43.1.1.2 | INTEGER | read-write | System level port under test |
| INT wwpLeosBenchmarkMode | 1.3.6.1.4.1.6141.2.60.43.1.1.3 | INTEGER | read-write | System level benchmark role |
| T/F wwpLeosBenchmarkEnable | 1.3.6.1.4.1.6141.2.60.43.1.1.4 | TruthValue | read-write | System level benchmark enable/disable. |
| T/F wwpLeosBenchmarkOperEnable | 1.3.6.1.4.1.6141.2.60.43.1.1.5 | TruthValue | read-only | System level benchmark operation enable/disable. |
| MAC wwpLeosBenchmarkLocalFpgaMac | 1.3.6.1.4.1.6141.2.60.43.1.1.6 | MacAddress | read-only | The RFC2544 internal test port assigned mac address. |
| wwpLeosBenchmarkReflectorModule | 1.3.6.1.4.1.6141.2.60.43.1.2 | |||
| T/F wwpLeosBenchmarkReflectorEnable | 1.3.6.1.4.1.6141.2.60.43.1.2.1 | TruthValue | read-write | Reflector enable/disable. |
| INT wwpLeosBenchmarkReflectorVid | 1.3.6.1.4.1.6141.2.60.43.1.2.2 | INTEGER | read-write | Vlan ID to match on in order for packet to be reflected. -1 instruct reflector to ignore vlan ID. |
| INT wwpLeosBenchmarkReflectorVendorType | 1.3.6.1.4.1.6141.2.60.43.1.2.3 | INTEGER | read-write | Indicator as to what type of equipement is generating the test traffic on the remote end. |
| wwpLeosBenchmarkGeneratorModule | 1.3.6.1.4.1.6141.2.60.43.1.3 | |||
| T/F wwpLeosBenchmarkGeneratorEnable | 1.3.6.1.4.1.6141.2.60.43.1.3.1 | TruthValue | read-write | Generator enable/disable. |
| STR wwpLeosBenchmarkGeneratorprofileUnderTest | 1.3.6.1.4.1.6141.2.60.43.1.3.2 | DisplayString | read-only | Profile currently under test or for which testing was last completed. |
| INT wwpLeosBenchmarkGeneratorThroughputTestState | 1.3.6.1.4.1.6141.2.60.43.1.3.3 | INTEGER | read-only | Throughput test state. |
| INT wwpLeosBenchmarkGeneratorFramelossTestState | 1.3.6.1.4.1.6141.2.60.43.1.3.4 | INTEGER | read-only | Frameloss test state. |
| BEN wwpLeosBenchmarkGeneratorLatencyTestState | 1.3.6.1.4.1.6141.2.60.43.1.3.5 | BenchmarkLatencyPdvTestState | read-only | Latency test state. |
| BEN wwpLeosBenchmarkGeneratorPdvTestState | 1.3.6.1.4.1.6141.2.60.43.1.3.6 | BenchmarkLatencyPdvTestState | read-only | Packet delay variation test state. |
| INT wwpLeosBenchmarkGeneratorRfc2544State | 1.3.6.1.4.1.6141.2.60.43.1.3.7 | INTEGER | read-only | RFC 2544 test suite state. |
| INT wwpLeosBenchmarkGeneratorCurrentPktSize | 1.3.6.1.4.1.6141.2.60.43.1.3.8 | INTEGER | read-only | Packet size in bytes currently used by the running test. |
| INT wwpLeosBenchmarkGeneratorCurrentRate | 1.3.6.1.4.1.6141.2.60.43.1.3.9 | INTEGER | read-only | Traffic rate currently used to generate packets in percent of the line rate |
| INT wwpLeosBenchmarkGeneratorSamplesCompleted | 1.3.6.1.4.1.6141.2.60.43.1.3.10 | INTEGER | read-only | When latency and/or pdv is running, this indicates how many samples have been gathered so far. |
| INT wwpLeosBenchmarkGeneratorCurrentIteration | 1.3.6.1.4.1.6141.2.60.43.1.3.11 | INTEGER | read-only | Indicates which iteration of the test suite is currently running for the profile under test. |
| INT wwpLeosBenchmarkGeneratorTotalIterations | 1.3.6.1.4.1.6141.2.60.43.1.3.12 | INTEGER | read-only | Indicates the total number of iterations that will be run in accordance to the interval and duration settings of the profile under test. A value of -1 indicates indefinite number of iterations; test traffic will stop when the user manually stops the profile under test. |
| wwpLeosBenchmarkFpgaStats | 1.3.6.1.4.1.6141.2.60.43.1.4 | |||
| C64 wwpLeosBenchmarkFpgaStatsRxPkts | 1.3.6.1.4.1.6141.2.60.43.1.4.1 | Counter64 | read-only | BENCHMARK FPGA stats received packets |
| C64 wwpLeosBenchmarkFpgaStatsCrcPkts | 1.3.6.1.4.1.6141.2.60.43.1.4.2 | Counter64 | read-only | BENCHMARK FPGA stats packets received with CRC errors |
| C64 wwpLeosBenchmarkFpgaStatsUdpChecksumPkts | 1.3.6.1.4.1.6141.2.60.43.1.4.3 | Counter64 | read-only | BENCHMARK FPGA stats packets received with CRC errors |
| C64 wwpLeosBenchmarkFpgaStatsDiscardPkts | 1.3.6.1.4.1.6141.2.60.43.1.4.4 | Counter64 | read-only | BENCHMARK FPGA stats packets received which don't match any active/enabled profile(s). |
| C64 wwpLeosBenchmarkFpgaStatsDuplicatePkts | 1.3.6.1.4.1.6141.2.60.43.1.4.5 | Counter64 | read-only | BENCHMARK FPGA stats packets received with a duplicate sequence number. |
| C64 wwpLeosBenchmarkFpgaStatsOOSeqPkts | 1.3.6.1.4.1.6141.2.60.43.1.4.6 | Counter64 | read-only | BENCHMARK FPGA stats packets received out of sequence |
| C64 wwpLeosBenchmarkFpgaStatsTxPkts | 1.3.6.1.4.1.6141.2.60.43.1.4.7 | Counter64 | read-only | BENCHMARK FPGA stats packets transmitted |
| C64 wwpLeosBenchmarkFpgaStatsOOOPkts | 1.3.6.1.4.1.6141.2.60.43.1.4.8 | Counter64 | read-only | BENCHMARK FPGA stats packets received with an out of order sequence number |
| C64 wwpLeosBenchmarkFpgaStatsDiscSeqNumPkts | 1.3.6.1.4.1.6141.2.60.43.1.4.9 | Counter64 | read-only | BENCHMARK FPGA stats packets received with a discontinued sequence number |
| wwpLeosBenchmarkPortStats | 1.3.6.1.4.1.6141.2.60.43.1.5 | |||
| C64 wwpLeosBenchmarkPortStatsTxBytes | 1.3.6.1.4.1.6141.2.60.43.1.5.1 | Counter64 | read-only | Number of bytes transmitted by the benchmak port |
| C64 wwpLeosBenchmarkPortStatsTxPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.2 | Counter64 | read-only | Number of packets transmitted by the benchmak port |
| C64 wwpLeosBenchmarkPortStatsCrcErrorPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.3 | Counter64 | read-only | Number of packets with CRC errors |
| C64 wwpLeosBenchmarkPortStatsUcastPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.4 | Counter64 | read-only | Number of unicast packets transmitted by the benchmak port |
| C64 wwpLeosBenchmarkPortStatsMcastPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.5 | Counter64 | read-only | Number of multicast packets transmitted by the benchmak port |
| C64 wwpLeosBenchmarkPortStatsBcastPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.6 | Counter64 | read-only | Number of broadcast packets transmitted by the benchmak port |
| C64 wwpLeosBenchmarkPortStatsUndersizePkts | 1.3.6.1.4.1.6141.2.60.43.1.5.7 | Counter64 | read-only | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| C64 wwpLeosBenchmarkPortStatsOversizePkts | 1.3.6.1.4.1.6141.2.60.43.1.5.8 | Counter64 | read-only | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| C64 wwpLeosBenchmarkPortStatsFragmentsPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.9 | Counter64 | read-only | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). |
| C64 wwpLeosBenchmarkPortStatsJabbersPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.10 | Counter64 | read-only | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). |
| C64 wwpLeosBenchmarkPortStatsTxPausePkts | 1.3.6.1.4.1.6141.2.60.43.1.5.11 | Counter64 | read-only | The transmit pause packets for the port. |
| C64 wwpLeosBenchmarkPortStatsTxDropPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.12 | Counter64 | read-only | The total number of dropped packets on the benchmark port when traffic profiles are enabled. (311v only) |
| C64 wwpLeosBenchmarkPortStatsTxDiscardPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.13 | Counter64 | read-only | The total number of discarded packets. |
| C64 wwpLeosBenchmarkPortStatsTxLOutRangePkts | 1.3.6.1.4.1.6141.2.60.43.1.5.14 | Counter64 | read-only | The transmit length out of range packet count. |
| C64 wwpLeosBenchmarkPortStatsTx64OctsPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.15 | Counter64 | read-only | Number of 64-byte packets transmitted on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsTx65To127Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.16 | Counter64 | read-only | Number of 64 to 127-byte packets transmitted on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsTx128To255Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.17 | Counter64 | read-only | Number of 128 to 255-byte packets transmitted on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsTx256To511Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.18 | Counter64 | read-only | Number of 256 to 511-byte packets transmitted on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsTx512To1023Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.19 | Counter64 | read-only | Number of 512 to 1023-byte packets transmitted on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsTx1024To1518Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.20 | Counter64 | read-only | Number of 1024 to 1518-byte packets transmitted on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsTx1519To2047Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.21 | Counter64 | read-only | Number of 1519 to 2047-byte packets transmitted on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsTx2048To4095Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.22 | Counter64 | read-only | Number of 2048 to 4095-byte packets transmitted on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsTx4096To9216Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.23 | Counter64 | read-only | Number of 4096 to 9216-byte packets transmitted on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRxBytes | 1.3.6.1.4.1.6141.2.60.43.1.5.24 | Counter64 | read-only | Number of bytes received on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRxPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.25 | Counter64 | read-only | Number of packets received on the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRxExDeferPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.26 | Counter64 | read-only | Number of excessive deferred packets. |
| C64 wwpLeosBenchmarkPortStatsRxDeferPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.27 | Counter64 | read-only | Number of deferred packets. |
| C64 wwpLeosBenchmarkPortStatsRxGiantPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.28 | Counter64 | read-only | Number of too big packets. |
| C64 wwpLeosBenchmarkPortStatsRxUnderRunPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.29 | Counter64 | read-only | Underrun packet count for the benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRxCrcErrorPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.30 | Counter64 | read-only | Number of packets received with CRC errors. |
| C64 wwpLeosBenchmarkPortStatsRxLCheckErrorPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.31 | Counter64 | read-only | Number of packets with length check errors. |
| C64 wwpLeosBenchmarkPortStatsRxLOutRangePkts | 1.3.6.1.4.1.6141.2.60.43.1.5.32 | Counter64 | read-only | The number of frames received by the benchmark port that exceeded the maximum permitted frame size. |
| C64 wwpLeosBenchmarkPortStatsRxPausePkts | 1.3.6.1.4.1.6141.2.60.43.1.5.33 | Counter64 | read-only | The total receive pause packets for the port. |
| C64 wwpLeosBenchmarkPortStatsRxUcastPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.34 | Counter64 | read-only | The total number of unicast packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRxMcastPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.35 | Counter64 | read-only | The total number of multicast packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRxBcastPkts | 1.3.6.1.4.1.6141.2.60.43.1.5.36 | Counter64 | read-only | The total number of broadcast packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRx64Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.37 | Counter64 | read-only | The total number of 64-byte packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRx65To127Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.38 | Counter64 | read-only | The total number of 65 to 127-byte packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRx128To255Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.39 | Counter64 | read-only | The total number of 128 to 255-byte packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRx256To511Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.40 | Counter64 | read-only | The total number of 256 to 511-byte packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRx512To1023Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.41 | Counter64 | read-only | The total number of 512 to 1023-byte packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRx1024To1518Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.42 | Counter64 | read-only | The total number of 1024 to 1518-byte packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRx1519To2047Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.43 | Counter64 | read-only | The total number of 1519 to 2047-byte packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRx2048To4095Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.44 | Counter64 | read-only | The total number of 2048 to 4095-byte packets received by benchmark port. |
| C64 wwpLeosBenchmarkPortStatsRx4096To9216Pkts | 1.3.6.1.4.1.6141.2.60.43.1.5.45 | Counter64 | read-only | The total number of 4096 to 9216-byte packets received by benchmark port. |
| wwpLeosBenchmarkProfileObjects | 1.3.6.1.4.1.6141.2.60.43.1.6 | |||
| wwpLeosBenchmarkProfileTable | 1.3.6.1.4.1.6141.2.60.43.1.6.1 | not-accessible | Table of profile entries. | |
| wwpLeosBenchmarkProfileEntry | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1 | not-accessible | BENCHMARK Profile characteristics. | |
| INT wwpLeosBenchmarkProfileEntryId | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.1 | INTEGER | read-only | Index for BENCHMARK profile records. |
| STR wwpLeosBenchmarkProfileEntryName | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.2 | DisplayString | read-only | Name of the profile as entered when created. |
| T/F wwpLeosBenchmarkProfileEntryEnabled | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.3 | TruthValue | read-write | Profile enable/disable |
| T/F wwpLeosBenchmarkProfileEntryStarted | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.4 | TruthValue | read-write | Profile start/stop |
| INT wwpLeosBenchmarkProfileEntryInterval | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.5 | INTEGER | read-write | Interval between the start of one test group to the start of the next test group. |
| INT wwpLeosBenchmarkProfileEntryDuration | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.6 | INTEGER | read-write | Duration of the testing. The test group is repeated until the duration ends. When indefinite is set, test group is run only once to completion |
| T/F wwpLeosBenchmarkProfileEntryThroughputTest | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.7 | TruthValue | read-write | Run throughput test |
| T/F wwpLeosBenchmarkProfileEntryFramelossTest | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.8 | TruthValue | read-write | Run frame loss test |
| T/F wwpLeosBenchmarkProfileEntryLatencyTest | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.9 | TruthValue | read-write | Run latency test |
| T/F wwpLeosBenchmarkProfileEntryPdvTest | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.10 | TruthValue | read-write | Run packet delay variation test |
| T/F wwpLeosBenchmarkProfileEntryRfc2544Suite | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.11 | TruthValue | read-write | Run RFC2544 test suite which includes throughput, frame loss and latency tests |
| MAC wwpLeosBenchmarkProfileEntryDstmac | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.12 | MacAddress | read-write | MAC address to use as the destination MAC address on the generated packets. |
| INT wwpLeosBenchmarkProfileEntryEncapType | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.13 | INTEGER | read-write | Encapsulation type to use for generated packets. |
| INT wwpLeosBenchmarkProfileEntryVid | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.14 | INTEGER | read-write | Vlan ID to used for generated packets. |
| INT wwpLeosBenchmarkProfileEntryPcp | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.15 | INTEGER | read-write | Vlan priority code point value to use for the generated packets. |
| INT wwpLeosBenchmarkProfileEntryCfi | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.16 | INTEGER | read-write | Vlan canonical format indicator to use for the generated packets. |
| INT wwpLeosBenchmarkProfileEntryTpid | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.17 | INTEGER | read-write | Vlan tag protocol identifier to use for the generated packets. |
| INT wwpLeosBenchmarkProfileEntryPduType | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.18 | INTEGER | read-write | Vlan tag protocol identifier to use for the generated packets. |
| IP wwpLeosBenchmarkProfileEntrySrcIpAddr | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.19 | IpAddress | read-write | Source IP address to use for the generated packets. |
| IP wwpLeosBenchmarkProfileEntryDstIpAddr | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.20 | IpAddress | read-write | Destination IP address to use for the generated packets. |
| INT wwpLeosBenchmarkProfileEntryDscp | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.21 | INTEGER | read-write | IP DSCP value to use for the generated packets. |
| OCT wwpLeosBenchmarkProfileEntryCustomPayload | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.22 | OCTET STRING | read-write | Custom payload to be used on the generated packets. |
| INT wwpLeosBenchmarkProfileEntryBandwidth | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.23 | INTEGER | read-write | Maximum bandwidth to use when generating test traffic for the profile. |
| T/F wwpLeosBenchmarkProfileEntryVidValidation | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.24 | TruthValue | read-write | Indicates whether VID validation is performed in the classifier or not on the returning packet. |
| INT wwpLeosBenchmarkProfileEntryMaxSearches | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.25 | INTEGER | read-write | For the throughput test, this is the maximum number of searches to find a transmit rate without drops for a given frame size. |
| INT wwpLeosBenchmarkProfileEntryMaxSamples | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.26 | INTEGER | read-write | For the latency and PDV tests, this is the number of samples to take in order to determine the min, avg and max latency and avg PDV. |
| INT wwpLeosBenchmarkProfileEntrySamplingInterval | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.27 | INTEGER | read-write | For the latency and PDV tests, this is the interval, in 100ms, to wait between samples. |
| INT wwpLeosBenchmarkProfileEntryFrameLossStartBw | 1.3.6.1.4.1.6141.2.60.43.1.6.1.1.28 | INTEGER | read-write | For the frame loss test, this indicates which bandwidth value to use as the starting bandwidth; the maximum bandwidth determined via the throughput test, the bandwidth parameter configured in the profile, or the maximum bandwidth of the link. |
| wwpLeosBenchmarkProfileThroughputStatisticsTable | 1.3.6.1.4.1.6141.2.60.43.1.6.2 | not-accessible | Table of BENCHMARK profile throughput statistics in Mbps. | |
| wwpLeosBenchmarkProfileThroughputStatsEntry | 1.3.6.1.4.1.6141.2.60.43.1.6.2.1 | not-accessible | BENCHMARK profile throughput statistics. | |
| INT wwpLeosBenchmarkProfileThroughputStatsProfileId | 1.3.6.1.4.1.6141.2.60.43.1.6.2.1.1 | INTEGER | read-only | Profile Id for which those throughput stats are associated. |
| INT wwpLeosBenchmarkProfileThroughputStatsFrameSizeIndex | 1.3.6.1.4.1.6141.2.60.43.1.6.2.1.2 | INTEGER | read-only | Frame size index for which those throughput stats are associated. |
| INT wwpLeosBenchmarkProfileThroughputStatsFrameSize | 1.3.6.1.4.1.6141.2.60.43.1.6.2.1.3 | INTEGER | read-only | Packet size in bytes. |
| U32 wwpLeosBenchmarkProfileThroughputStatsMin | 1.3.6.1.4.1.6141.2.60.43.1.6.2.1.4 | Unsigned32 | read-only | Minimum throughput recorded for the given packet size. |
| U32 wwpLeosBenchmarkProfileThroughputStatsMax | 1.3.6.1.4.1.6141.2.60.43.1.6.2.1.5 | Unsigned32 | read-only | Maximum throughput recorded for the given packet size. |
| U32 wwpLeosBenchmarkProfileThroughputStatsAvg | 1.3.6.1.4.1.6141.2.60.43.1.6.2.1.6 | Unsigned32 | read-only | Average throughput recorded for the given packet size. |
| INT wwpLeosBenchmarkProfileThroughputStatsIterations | 1.3.6.1.4.1.6141.2.60.43.1.6.2.1.7 | INTEGER | read-only | Number of times the test has been run for this packet size. |
| INT wwpLeosBenchmarkProfileThroughputStatsActiveVid | 1.3.6.1.4.1.6141.2.60.43.1.6.2.1.8 | INTEGER | read-only | Active VLAN Id. Either the value configured in the profile or the one specified with the start command. |
| MAC wwpLeosBenchmarkProfileThroughputStatsActiveDstMac | 1.3.6.1.4.1.6141.2.60.43.1.6.2.1.9 | MacAddress | read-only | Active destination MAC address. Either the value configured in the profile or the value specified with the start command. |
| wwpLeosBenchmarkProfileFramelossStatisticsTable | 1.3.6.1.4.1.6141.2.60.43.1.6.3 | not-accessible | Table of BENCHMARK profile frameloss statistics. | |
| wwpLeosBenchmarkProfileFramelossStatsEntry | 1.3.6.1.4.1.6141.2.60.43.1.6.3.1 | not-accessible | BENCHMARK profile frameloss statistics. | |
| INT wwpLeosBenchmarkProfileFramelossStatsProfileId | 1.3.6.1.4.1.6141.2.60.43.1.6.3.1.1 | INTEGER | read-only | Profile Id. |
| INT wwpLeosBenchmarkProfileFramelossStatsFrameSizeIndex | 1.3.6.1.4.1.6141.2.60.43.1.6.3.1.2 | INTEGER | read-only | Frame size index. |
| INT wwpLeosBenchmarkProfileFramelossStatsRateIndex | 1.3.6.1.4.1.6141.2.60.43.1.6.3.1.3 | INTEGER | read-only | Rate index. |
| INT wwpLeosBenchmarkProfileFramelossStatsFrameSize | 1.3.6.1.4.1.6141.2.60.43.1.6.3.1.4 | INTEGER | read-only | Packet size in bytes. |
| INT wwpLeosBenchmarkProfileFramelossStatsRate | 1.3.6.1.4.1.6141.2.60.43.1.6.3.1.5 | INTEGER | read-only | Rate in percent of line rate. |
| U32 wwpLeosBenchmarkProfileFramelossStatsFirst | 1.3.6.1.4.1.6141.2.60.43.1.6.3.1.6 | Unsigned32 | read-only | Number of frames lost on first test sequence. |
| U32 wwpLeosBenchmarkProfileFramelossStatsSecond | 1.3.6.1.4.1.6141.2.60.43.1.6.3.1.7 | Unsigned32 | read-only | Number of frames lost on second test sequence. |
| INT wwpLeosBenchmarkProfileFramelossStatsActiveVid | 1.3.6.1.4.1.6141.2.60.43.1.6.3.1.8 | INTEGER | read-only | Active VLAN Id. Either the value configured in the profile or the one specified with the start command. |
| MAC wwpLeosBenchmarkProfileFramelossStatsActiveDstMac | 1.3.6.1.4.1.6141.2.60.43.1.6.3.1.9 | MacAddress | read-only | Active destination MAC address. Either the value configured in the profile or the value specified with the start command. |
| wwpLeosBenchmarkProfileLatencyStatisticsTable | 1.3.6.1.4.1.6141.2.60.43.1.6.4 | not-accessible | Table of BENCHMARK profile latency statistics in usec. | |
| wwpLeosBenchmarkProfileLatencyStatsEntry | 1.3.6.1.4.1.6141.2.60.43.1.6.4.1 | not-accessible | BENCHMARK profile latency statistics. | |
| INT wwpLeosBenchmarkProfileLatencyStatsProfileId | 1.3.6.1.4.1.6141.2.60.43.1.6.4.1.1 | INTEGER | read-only | Profile Id for which those latency stats are associated. |
| INT wwpLeosBenchmarkProfileLatencyStatsFrameSizeIndex | 1.3.6.1.4.1.6141.2.60.43.1.6.4.1.2 | INTEGER | read-only | Frame size index. |
| INT wwpLeosBenchmarkProfileLatencyStatsFrameSize | 1.3.6.1.4.1.6141.2.60.43.1.6.4.1.3 | INTEGER | read-only | Packet size in bytes. |
| U32 wwpLeosBenchmarkProfileLatencyStatsMin | 1.3.6.1.4.1.6141.2.60.43.1.6.4.1.4 | Unsigned32 | read-only | Minimum latency recorded for the given packet size. |
| U32 wwpLeosBenchmarkProfileLatencyStatsMax | 1.3.6.1.4.1.6141.2.60.43.1.6.4.1.5 | Unsigned32 | read-only | Maximum latency recorded for the given packet size. |
| U32 wwpLeosBenchmarkProfileLatencyStatsAvg | 1.3.6.1.4.1.6141.2.60.43.1.6.4.1.6 | Unsigned32 | read-only | Average latency recorded for the given packet size. |
| INT wwpLeosBenchmarkProfileLatencyStatsSamples | 1.3.6.1.4.1.6141.2.60.43.1.6.4.1.7 | INTEGER | read-only | Number of samples taken during the test. |
| INT wwpLeosBenchmarkProfileLatencyStatsActiveVid | 1.3.6.1.4.1.6141.2.60.43.1.6.4.1.8 | INTEGER | read-only | Active VLAN Id. Either the value configured in the profile or the one specified with the start command. |
| MAC wwpLeosBenchmarkProfileLatencyStatsActiveDstMac | 1.3.6.1.4.1.6141.2.60.43.1.6.4.1.9 | MacAddress | read-only | Active destination MAC address. Either the value configured in the profile or the value specified with the start command. |
| wwpLeosBenchmarkProfilePdvStatisticsTable | 1.3.6.1.4.1.6141.2.60.43.1.6.5 | not-accessible | Table of BENCHMARK profile packet delay variation statistics in usec. | |
| wwpLeosBenchmarkProfilePdvStatsEntry | 1.3.6.1.4.1.6141.2.60.43.1.6.5.1 | not-accessible | BENCHMARK profile packet delay variation statistics. | |
| INT wwpLeosBenchmarkProfilePdvStatsProfileId | 1.3.6.1.4.1.6141.2.60.43.1.6.5.1.1 | INTEGER | read-only | Profile Id associated to those PDV stats. |
| INT wwpLeosBenchmarkProfilePdvStatsFrameSizeIndex | 1.3.6.1.4.1.6141.2.60.43.1.6.5.1.2 | INTEGER | read-only | Frame size index associated to those PDV stats. |
| INT wwpLeosBenchmarkProfilePdvStatsFrameSize | 1.3.6.1.4.1.6141.2.60.43.1.6.5.1.3 | INTEGER | read-only | Packet size in bytes. |
| U32 wwpLeosBenchmarkProfilePdvStatsAvg | 1.3.6.1.4.1.6141.2.60.43.1.6.5.1.4 | Unsigned32 | read-only | Average PDV recorded for the given packet size. |
| INT wwpLeosBenchmarkProfilePdvStatsSamples | 1.3.6.1.4.1.6141.2.60.43.1.6.5.1.5 | INTEGER | read-only | Number of samples used for the test. |
| INT wwpLeosBenchmarkProfilePdvStatsActiveVid | 1.3.6.1.4.1.6141.2.60.43.1.6.5.1.6 | INTEGER | read-only | Active VLAN Id. Either the value configured in the profile or the one specified with the start command. |
| MAC wwpLeosBenchmarkProfilePdvStatsActiveDstMac | 1.3.6.1.4.1.6141.2.60.43.1.6.5.1.7 | MacAddress | read-only | Active destination MAC address. Either the value configured in the profile or the value specified with the start command. |
| wwpLeosBenchmarkProfileFrameSizeTable | 1.3.6.1.4.1.6141.2.60.43.1.6.6 | not-accessible | Table providing the list of frame sizes used for testing the profiles. | |
| wwpLeosBenchmarkProfileFrameSizeEntry | 1.3.6.1.4.1.6141.2.60.43.1.6.6.1 | not-accessible | Profile frame size entry. | |
| INT wwpLeosBenchmarkProfileFrameSizeProfileId | 1.3.6.1.4.1.6141.2.60.43.1.6.6.1.1 | INTEGER | read-only | Profile Id this frame size entry is associated with. |
| INT wwpLeosBenchmarkProfileFrameSizeIndex | 1.3.6.1.4.1.6141.2.60.43.1.6.6.1.2 | INTEGER | read-only | Frame size index into the targeted profile's frame size list. |
| INT wwpLeosBenchmarkProfileFrameSize | 1.3.6.1.4.1.6141.2.60.43.1.6.6.1.3 | INTEGER | read-only | Frame size in bytes. |
RFC description
Ciena proprietary MIB module for performance benchmarking on LEOS (Light Efficient OpenFlow System) network equipment. Provides SNMP objects for monitoring and collecting performance metrics and benchmark data.
Start monitoring Ciena LEOS / World Wide Packets Metro Ethernet device (throughput/latency benchmark-test result status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.