WWP-LEOS-SYSLOG-COLLECTOR-MIB :: wwpLeosSyslogCollectorResolvedInetAddrType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WWP-LEOS-SYSLOG-COLLECTOR-MIB › wwpLeosSyslogCollectorResolvedInetAddrType

wwpLeosSyslogCollectorResolvedInetAddrType

Module: WWP-LEOS-SYSLOG-COLLECTOR-MIB

OID (symbolic): WWP-LEOS-SYSLOG-COLLECTOR-MIB::wwpLeosSyslogCollectorResolvedInetAddrType

OID (numeric): 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.13

Node type: OBJECT-TYPE

Type: InetAddressType

Access: read-only

Description: Specifies the resolved IP address type . Used in conjunction with wwpLeosSyslogCollectorResolvedInetAddress. When set to : ipv4 : wwpLeosSyslogCollectorResolvedInetAddress should be compliant with InetAddressIPv4 ipv6 : wwpLeosSyslogCollectorResolvedInetAddress should be compliant with InetAddressIPv6

What is wwpLeosSyslogCollectorResolvedInetAddrType?

This read-only value reports the type, ipv4 or ipv6, of the resolved address available in wwpLeosSyslogCollectorResolvedInetAddress, used together with that object per the description. Admins read it to know how to interpret the accompanying resolved-address object's contents. A value of ipv6 tells the admin the accompanying wwpLeosSyslogCollectorResolvedInetAddress object should be read as an IPv6 address, per the description's own guidance.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.13
snmpwalk -v2c -c public <target> WWP-LEOS-SYSLOG-COLLECTOR-MIB::wwpLeosSyslogCollectorResolvedInetAddrType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.13.1
snmpget -v2c -c public <target> WWP-LEOS-SYSLOG-COLLECTOR-MIB::wwpLeosSyslogCollectorResolvedInetAddrType.1

Start monitoring Ciena/World Wide Packets Metro Ethernet switch (syslog collector destination/facility-filter config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-SYSLOG-COLLECTOR-MIB::wwpLeosSyslogCollectorResolvedInetAddrType OID value, configure state conditions and alerts, and monitor any Ciena/World Wide Packets Metro Ethernet switch (syslog collector destination/facility-filter config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.21wwpLeosSyslogCollectorMIBWWP-LEOS-SYSLOG-COLLECTOR-MIB
1.3.6.1.4.1.6141.2.60.21.1wwpLeosSyslogCollMIBObjectsWWP-LEOS-SYSLOG-COLLECTOR-MIB
1.3.6.1.4.1.6141.2.60.21.1.2wwpLeosSyslogCollWWP-LEOS-SYSLOG-COLLECTOR-MIB
1.3.6.1.4.1.6141.2.60.21.1.2.1wwpLeosSyslogCollectorTableWWP-LEOS-SYSLOG-COLLECTOR-MIB
1.3.6.1.4.1.6141.2.60.21.1.2.1.1wwpLeosSyslogCollectorEntryWWP-LEOS-SYSLOG-COLLECTOR-MIB
1.3.6.1.4.1.6141.2.60.21.1.2.1.1.13wwpLeosSyslogCollectorResolvedInetAddrTypeWWP-LEOS-SYSLOG-COLLECTOR-MIB