All MIBs › TROPIC-OTH-MIB
Organization: Nokia
Last Updated: 2016-04-21
Category: Nokia Optical Transport
Description: Manages Nokia Tropic optical transport hierarchy objects for OTH framing and overhead monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TROPIC-OTH-MIB?
TROPIC-OTH-MIB is part of Nokia's Tropic DWDM MIB suite, covering the Optical Transport Hierarchy (OTH/OTN) layer responsible for framing and overhead management of client signals mapped into optical transport frames. It exposes objects related to OTN framing structure and overhead monitoring data. Its monitoring role centers on hardware/signal status: overhead monitoring bytes surface transmission errors, alarms, and performance-monitoring counters at the OTN framing layer, which is critical for detecting bit errors or signal degradation before they affect client traffic. It is part of the same Tropic MIB family as TROPIC-OCH-MIB and TROPIC-AMPLIFIER-MIB, together modeling the full DWDM transport stack. It is deployed on Nokia DWDM optical transport network elements in service-provider optical backbone networks. Engineers can download the TROPIC-OTH-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-OTH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia (Alcatel-Lucent) Tropic DWDM optical transport network element
Monitoring Examples
No sample object names were provided for this module. Based on its description as covering OTH framing and overhead attributes, an admin would typically poll OTN overhead/performance-monitoring objects to detect bit-error-rate anomalies or framing alarms, which would indicate a degrading optical signal or a fiber/transponder issue upstream of the affected network element.
What Can Be Monitored
- OTN framing status
- overhead monitoring bytes
- OTN performance/alarm counters
This MIB depends on
Related MIBs
Imported Objects
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TruthValue |
From TROPIC-GLOBAL-REG
| tnOthMIB | OBJECT-IDENTITY |
| tnPortModules | OBJECT-IDENTITY |
From TROPIC-L1SERVICE-MIB
| ApsK1K2 |
From TROPIC-TC
| AluWdmDMInfoCurrentStatus | |
| AluWdmEnabledDisabled | |
| AluWdmOdukStatus | |
| AluWdmOthOdukCurrentStatusBits | |
| AluWdmOthOdukRate | |
| AluWdmOthOdukXcRate | |
| AluWdmTimDetMode | |
| AluWdmTtiStatus | |
| TnCommand | |
| TropicOperationalCapabilityType | |
| TropicStateQualifierType |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| tnOthMibModule | 1.3.6.1.4.1.7483.1.1.2.2.4.8 | DWDM OTH MIB attributes. | ||
| tnOthConf | 1.3.6.1.4.1.7483.2.2.4.10.1 | |||
| tnOthGroups | 1.3.6.1.4.1.7483.2.2.4.10.1.1 | |||
| tnOthOdukScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.1 | |||
| tnOthOdukGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.2 | |||
| tnOthOdukTtpScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.3 | |||
| tnOthOdukTtpGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.4 | |||
| tnOthOdukNimScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.5 | |||
| tnOthOdukNimGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.6 | |||
| tnOthGcc12ScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.7 | |||
| tnOthGcc12Group | 1.3.6.1.4.1.7483.2.2.4.10.1.1.8 | |||
| tnOthOdukTScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.9 | |||
| tnOthOdukTGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.10 | |||
| tnOthOdukXcScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.13 | |||
| tnOthOdukXcGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.14 | |||
| tnOthOdukApsScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.15 | |||
| tnOthOdukApsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.16 | |||
| tnOthOdukMemberScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.17 | |||
| tnOthOdukMemberGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.18 | |||
| tnOthOdukApsGroupIdScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.19 | |||
| tnOthOdukApsGroupIdGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.20 | |||
| tnOthOdukOptsgScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.21 | |||
| tnOthOdukOptsgGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.22 | |||
| tnOthOdukDMConfigScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.23 | |||
| tnOthOdukDMConfigGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.24 | |||
| tnOthOdukDMInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.25 | |||
| tnOthOdukDMInfoGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.26 | |||
| tnOthOdukIncFtflInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.27 | |||
| tnOthOdukIncFtflInfoGroup | 1.3.6.1.4.1.7483.2.2.4.10.1.1.28 | |||
| tnOthCompliances | 1.3.6.1.4.1.7483.2.2.4.10.1.2 | |||
| tnOthCompliance | 1.3.6.1.4.1.7483.2.2.4.10.1.2.1 | |||
| tnOthObjs | 1.3.6.1.4.1.7483.2.2.4.10.2 | |||
| tnOthBasics | 1.3.6.1.4.1.7483.2.2.4.10.2.1 | |||
| I32 tnOthOdukAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.1 | Integer32 | read-only | |
| tnOthOdukTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2 | not-accessible | ||
| tnOthOdukEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1 | not-accessible | ||
| U32 tnOthIfIndex | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.1 | Unsigned32 | not-accessible | A unique index, greater than zero, for each ODU entity. This is the high-order index part. ------------------------------------------------------ | Bit31-Bit24 | Bit23-Bit16 | Bit15-Bit3 | Bit2-Bit0 | --------------+-------------+------------+------------ | 8 bits | 8 bits | 13 bits | 3 bits | --------------+-------------+------------+------------ | shelf | slot | HO-ODU | Reserved | | | | Number | as 0 | ------------------------------------------------------ For the 260SCX2 card, the bits in this attribute are used as the following: ------------------------------------------------------ | Bit31-Bit24 | Bit23-Bit16 | Bit15-Bit8 | Bit7-Bit0 | --------------+-------------+------------+------------ | 8 bits | 8 bits | 8 bits | 8 bits | --------------+-------------+------------+------------ | shelf | slot | port | Reserved | | | | | as 0 | ------------------------------------------------------ The bits in the port are further broken down as the following: For L1Ch1/L1CH2 ports Broken 8 bits of port (Bit15 to Bit8) into 3 bits for port Broken 8 bits of reserved (Bit7-Bit0) into 4 Bits of Channel ------------------------------------------------------------------- | Bit31-Bit24 | Bit23-Bit16 | Bit15-Bit11 | Bit10-Bit8 | Bit7-Bit4 | Bit3-Bit0 --------------+-------------+------------+--------------+------------------------ | 8 bits | 8 bits | | 3 bits | 4 bits | 4 bits | --------------+-------------+------------+-------------+-------------+------------ | shelf | slot | Reserved | port | Channel | Reserved 4 bits as zero | |
| U32 tnOthIfIndexLo | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.2 | Unsigned32 | not-accessible | A unique index, greater than zero, for each ODU entity. This is the low-order index part. ----------------------------------------------------------- | Bit31-Bit29 | Bit28-Bit27 | Bit26-Bit25 | Bit24-Bit16 | --------------+---------------+-------------+-------------+ | 3 bits | 2 bits | 2 bits | 9 bits | --------------+---------------+-------------+-------------+ | TCM Level | TCM Direction | Reserved | Lo-ODUID | | (1-6) | (AM=1, BM=2) | as 0 | | ----------------------------------------------------------- --------------------------------------- | Bit15-Bit10 | Bit9-Bit5 | Bit4-Bit0 | --------------+-----------+-----------+ | 6 bits | 5 bits | 5 bits | --------------+-----------+------------ | Container | HO-ODU | LO-ODU | | Type | ODU Type | ODU Type | --------------------------------------- Container Type | Value ------------------------------------+--------- NULL | 0 HO-ODU NIM | 1 Client Transparent ODU | 2 LO-ODU NIM | 3 ODU-TP | 4 ODU POOL | 5 ODU1PTF (11dpm12/4qpa8 specific) | 6 OPTSG | 7 ODUTYPE | Value ----------------+--------- NULL | 0 ODU0 | 1 ODU1 | 2 ODU1e | 3 ODU1f | 4 ODU2 | 5 ODU2e | 6 ODU2f | 7 ODU3 | 8 ODU3e1 | 9 ODU3e2 | 10 ODU4 | 11 ODUflex(CBR) | 12 OPTSG | 13 ODUflex(GFP) | 14 |
| INT tnOthOdukDirectionality | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.3 | INTEGER | read-only | Indicates the directionality of the entity. |
| ALU tnOthOdukRate | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.4 | AluWdmOthOdukRate | read-only | Indicates the ODUk entity rate. |
| BIT tnOthOdukTcmFieldsInUse | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.5 | Bits | read-only | Indicates the TCM fields and TTP/NIM attributes that are currently in use. A bit that is set to 1 means that the corresponding TCM field is used. This object will be updated when rows are created in or deleted from tnOthOdukTTable. |
| T/F tnOthOdukTtpPresent | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.6 | TruthValue | read-only | This object has the value true(1) if the ifEntry under which it is instantiated contains an ODUk Trail Termination Point, i.e., the endpoint of an ODUk path. In that case there will be a corresponding row in the ODUk TTP config table and it will not be possible to create corresponding rows in tnOthOdukNimTable. This object has the value false(2) if the ifEntry under which it is instantiated contains an intermediate ODUk Connection Termination Point. In that case there is no corresponding row in tnOthOdukTtpTable, but it will be possible to create corresponding rows in tnOthOdukNimTable. This object also affects the allowable options in rows created in tnOthGcc12Table, as specified in the DESCRIPTION clauses of the columns in those tables. |
| ALU tnOthOdukAdminStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.7 | AluWdmOdukStatus | read-create | ODUk administrative state. It may be used to suppress the alarms or disable consequent actions on the ODU entity. |
| T/F tnOthOdukStateAINS | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.8 | TruthValue | read-create | ODUk state AINS attributes. |
| ALU tnOthOdukOperStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.9 | AluWdmOdukStatus | read-only | ODUk operational state of the interface. |
| TRO tnOthOdukStateQualifier | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.10 | TropicStateQualifierType | read-only | Indicates the state qualifier (i.e., the secondary state) of the ODUk state. |
| TRO tnOthOdukOperationalCapability | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.11 | TropicOperationalCapabilityType | read-only | The partiallyEnabled(3) state means an abnormal state. |
| I32 tnOthOdukAINSDebounceTime | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.12 | Integer32 | read-create | This attribute must be set in multiples of 60s. It is equal to system AINS debounce time when port AINS use system default is true. Setting the OTUk AINS debounce time and OTUk AINS use system default to true in the same set request is restricted. Current configurable range: 1m to 96h 0m. |
| T/F tnOthOdukUsingSysAINSDebounceTime | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.13 | TruthValue | read-create | Using system AINS debounce time. Sets with a value of false are restricted. The network operator must set OTUk AINS debounce time to some valid value to disable the use of system AINS debounce time. Setting the port AINS debounce time and port AINS use system default to true in the same set request is restricted. |
| U32 tnOthOdukAINSDebounceTimeRemaining | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.14 | Unsigned32 | read-only | Number of seconds until the OTUk AINS debounce time expires. If port AINS is false or port AINS debounce time is 0, the value of this attribute will be 0. |
| TNC tnOthOdukForceAdminStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.15 | TnCommand | read-create | Setting this attribute to execute will force tnOthOdukAdminStatus change. This works only when tnOthOdukAdminStatus is down. When queried, this attribute returns a value of noCmd. |
| INT tnOthOdukMgracd | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.16 | INTEGER | read-create | Indicates if managed by CP, MGNPLN, shared by both or free. |
| OCT tnOthOdukAlmProfName | 1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.17 | OCTET STRING | read-create | |
| I32 tnOthOdukTtpAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.3 | Integer32 | read-only | |
| tnOthOdukTtpTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4 | not-accessible | ||
| tnOthOdukTtpEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1 | not-accessible | ||
| OCT tnOthOdukTtpSapiTransmitted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.1 | OCTET STRING | read-create | The SAPI bytes in the trace identifier transmitted. This object is applicable when tnOthOdukDirectionality has the value source(2) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value sink(1). TXSAPI is the fist 16 Octets (TTI[0]-TTI[15]) and TTI[0] (i.e., SAPI[0]) shall be fixed to all 0s. |
| OCT tnOthOdukTtpDapiExpected | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.2 | OCTET STRING | read-create | The DAPI bytes expected by the receiver. |
| OCT tnOthOdukTtpSapiExpected | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.3 | OCTET STRING | read-create | The SAPI expected by the receiver. This object is applicable only to the sink function, i.e., only when tnOthOdukDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value source(2). This object has no effect when tnOthOdukTtpTimDetMode has the value off(1). |
| OCT tnOthOdukTtpTraceIdentifierAccepted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.4 | OCTET STRING | read-only | The actual trace identifier accepted. This object is applicable only to the sink function, i.e., only when tnOthOdukDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value source(2). The value of this object is unspecified when tnOthOdukTtpCurrentStatus indicates a near-end defect (i.e., oci(0), lck(1), ssf(5)) that prevents extraction of the trace message. It consists of the following three parts: - RXSAPI is the fist 16 octets (TTI[0]-TTI[15]) - RXDAPI is the second 16 octets (TTI[16]-TTI[31]) - RXOS (operator specific) is the last 32 octets (TTI[32]-TTI[63]) TTI[0] (i.e., SAPI[0]) and TTI[16] (i.e., DAPI[0]) shall be fixed to all 0s. |
| ALU tnOthOdukTtpTimDetMode | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.5 | AluWdmTimDetMode | read-create | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is applicable only to the sink function, i.e., only when tnOthOdukDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value source(2). |
| T/F tnOthOdukTtpTimActEnabled | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.6 | TruthValue | read-create | Indicates whether the Trace Identifier Mismatch (TIM). Consequent Action function is enabled. This object is applicable only to the sink function; i.e., only when tnOthOdukDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value source(2). This object has no effect when tnOthOdukTtpTimDetMode has the value off(1). |
| ALU tnOthOdukTtpTtiStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.7 | AluWdmTtiStatus | read-only | ODUk TTI status. |
| U32 tnOthOdukTtpDegThr | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.8 | Unsigned32 | read-create | Specifies the burst threshold as a number of errored blocks on the ODU layer. A second is declared as good if the number of detected errored blocks within one second is less than tnOthOdukTtpDegThr, otherwise the second is declared as bad second. |
| U32 tnOthOdukTtpDegM | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.9 | Unsigned32 | read-create | Specifies the number of consecutive bad seconds to be detected before declaring a signal degrade defect on the ODU. The defect is cleared if tnOthOdukTtpDegM consecutive good seconds are detected. Current Configurable range: 2 to 10. |
| U32 tnOthOdukPayloadType | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.10 | Unsigned32 | read-create | The ODUk payload type value provisioned on the transmitting direction. This is applicable only to an ODU adaptation function. |
| U32 tnOthOdukRxPayloadType | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.11 | Unsigned32 | read-only | The received ODUk payload type value. Current Range: 0 to 255. |
| T/F tnOthOdukPlmConsequenceAction | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.12 | TruthValue | read-create | PLM consequence action. |
| STR tnOthOdukTxOduStruct | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.13 | SnmpAdminString | read-create | The transmitted ODU payload structure value. It is programmed into the transmitted ODU MSI bytes. |
| STR tnOthOdukRxOduStruct | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.14 | SnmpAdminString | read-only | The received ODU payload structure value. It is retrieved from the received ODU MSI bytes. |
| ALU tnOthOdukTtpCurrentStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.15 | AluWdmOthOdukCurrentStatusBits | read-only | Indicates the defect condition of the entity, if any. This object is applicable only to the sink function, i.e., only when tnOthOdukDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value source(2). |
| ALU tnOthOdukOdu0Interwk | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.16 | AluWdmEnabledDisabled | read-create | Oduk Odu0 interworking. |
| OCT tnOthOdukTtpDapiAccepted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.17 | OCTET STRING | read-only | The DAPI bytes received. |
| OCT tnOthOdukTtpDapiTransmitted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.18 | OCTET STRING | read-create | The DAPI bytes transmitted. The TTI[17] to TTI[31] contain the 15-character destination access point identifier (DAPI). |
| OCT tnOthOdukTtpOsAccepted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.19 | OCTET STRING | read-only | The OS bytes received |
| OCT tnOthOdukTtpOsTransmitted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.20 | OCTET STRING | read-create | The OS bytes transmitted. The TTI[32] to TTI[63] contain the 32-character Operator Specific(OS). |
| OCT tnOthOdukRxMSI | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.21 | OCTET STRING | read-only | Indicates the MSI values. The MSI is reported as two Hex bytes per each Timeslot (TS) in the range of [00 FF]. For example, ODU4 MSI under PT=0x21 will be reported as 160 HEX Bytes for 80 TS. |
| INT tnOthOdukTtpCndRes | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.22 | INTEGER | read-create | |
| INT tnOthOdukTtpCmEmphasis | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.23 | INTEGER | read-create | |
| OCT tnOthOdukTtpAlmProfName | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.24 | OCTET STRING | read-create | |
| INT tnOthOdukTtpManualOduPtf | 1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.25 | INTEGER | read-create | |
| I32 tnOthOdukNimAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.5 | Integer32 | read-only | |
| tnOthOdukNimTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6 | not-accessible | ||
| tnOthOdukNimEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1 | not-accessible | ||
| INT tnOthOdukNimDirectionality | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.1 | INTEGER | not-accessible | Specifies the monitor point for the ODUk Path non-intrusive monitoring function. The value source(2) is not allowed if the corresponding instance of tnOthOdukDirectionality has the value sink(1), and the value sink(1) is not allowed if the corresponding instance of tnOthOdukDirectionality has the value source(2). Either the value sink(1) or source(2) is allowed if the corresponding instance of tnOthOdukDirectionality has the value bidirectional(3). The value sink(1) means monitoring at the sink direction path signal of the ODUk CTP. The value source(2) means monitoring at the source direction path signal of the ODUk CTP. Monitoring the source direction of an ODUk CTP is necessary in those cases where the ODUk CTP is at an SNCP (Subnetwork Connection Protection) end (e.g., see Figure I.1.2/G.874.1). If one would like to get the performance of the protected connection, one cannot use the NIM function at both ODUk CTP sinks (before the matrix), instead one should monitor the signal at the source ODUk CTP after the matrix. |
| OCT tnOthOdukNimDapiExpected | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.2 | OCTET STRING | read-create | The DAPI bytes expected by the receiver. |
| OCT tnOthOdukNimSapiExpected | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.3 | OCTET STRING | read-create | The SAPI expected by the receiver. This object has no effect when tnOthOdukNimTimDetMode has the value off(1). |
| OCT tnOthOdukNimTraceIdentifierAccepted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.4 | OCTET STRING | read-only | The actual trace identifier accepted. The value of this object is unspecified if tnOthOdukNimCurrentStatus has any of the bit positions oci(0), lck(1), or ssf(5) set or if tnOthOdukNimRowStatus has any value other than active(1). It consists of three parts: - RXSAPI is the fist 16 octets (TTI[0]-TTI[15]) - RXDAPI is the second 16 octets (TTI[16]- TTI[31]) - RXOS (operator specific) is the last 32 octets (TTI[32]- TTI[63]). TTI[0] (i.e., SAPI[0]) and TTI[16] (i.e., DAPI[0]) shall be fixed to all 0s. |
| ALU tnOthOdukNimTimDetMode | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.5 | AluWdmTimDetMode | read-create | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. |
| T/F tnOthOdukNimTimActEnabled | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.6 | TruthValue | read-create | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. |
| ALU tnOthOdukNimTtiStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.7 | AluWdmTtiStatus | read-only | ODUk Nim TTI status. |
| U32 tnOthOdukNimDegThr | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.8 | Unsigned32 | read-create | Specifies the burst threshold as a number of errored blocks on the ODU layer. A second is declared as good if the number of detected errored blocks within one second is less than tnOthOdukNimDegThr, otherwise the second is declared as bad second. |
| U32 tnOthOdukNimDegM | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.9 | Unsigned32 | read-create | Specifies the number of consecutive bad seconds to be detected before declaring a signal degrade defect on the ODU. The defect is cleared if tnOthOdukNimDegM consecutive good seconds are detected. Current configurable range: 2 to 10. |
| T/F tnOthOdukNimPom | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.11 | TruthValue | read-create | This object is used to model the activateNim and deactivateNim operations of an OTUk_CTP for non-intrusive monitoring control as defined in G.874.1. Setting this object to true implies activateNim, and setting this object to false implies deactivateNim. |
| OCT tnOthOdukNimDapiAccepted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.12 | OCTET STRING | read-only | The DAPI bytes received. |
| OCT tnOthOdukNimOsAccepted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.13 | OCTET STRING | read-only | The OS bytes received. |
| OCT tnOthOdukNimAlmProfName | 1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.14 | OCTET STRING | read-create | |
| I32 tnOthGcc12AttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.7 | Integer32 | read-only | |
| tnOthGcc12Table | 1.3.6.1.4.1.7483.2.2.4.10.2.1.8 | not-accessible | ||
| tnOthGcc12Entry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1 | not-accessible | ||
| T/F tnOthGcc12Codirectional | 1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1.1 | TruthValue | not-accessible | Indicates the directionality of the GCC12 termination with respect to the associated ODUk CTP. The value true(1) means that the sink part of the GCC12 extracts COMMS data from the signal at the input to the ODUk CTP sink and the source part of the GCC12 inserts COMMS data into the signal at the output of the ODUk CTP source. The value false(2) means that the sink part of the GCC12 extracts COMMS data from the signal at the output of the ODUk CTP source and the source part of the GCC12 inserts COMMS data into the signal at the input of the ODUk CTP sink. This attribute may assume either value when the corresponding instance of tnOthOdukTtpPresent has the value false(2). When the value of the corresponding instance of tnOthOdukTtpPresent is true(1) then the only value allowed for this attribute is true(1). |
| INT tnOthGcc12GccAccess | 1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1.2 | INTEGER | not-accessible | Indicates the GCC access represented by the entity. |
| ROW tnOthGcc12RowStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1.3 | RowStatus | read-create | This columnar object is used for creating and deleting a conceptual row of the tnOthGcc12 config table. It is used to model the addGCC12Access and removeGCC12Access operations of an ODUk CTP or ODUk TTP for GCC12 access control as defined in G.874.1. Setting RowStatus to createAndGo or createAndWait implies addGCC12Access. Setting RowStatus to destroy implies removeGCC12Access. |
| T/F tnOthGcc12GccPassThrough | 1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1.4 | TruthValue | read-create | Controls whether the selected GCC overhead bytes are passed through or modified. The value true(1) means that the selected GCC overhead bytes are passed through unmodified from the ODUk CTP input to the ODUk CTP output. The value false(2) means that the selected GCC overhead bytes are set to zero at the ODUk CTP output after the extraction of the COMMS data. This object has no effect if the corresponding instance of tnOthOdukTtpPresent has the value true(1). The value of this object may not be changed when tnOthGcc12RowStatus has the value active(1). |
| OCT tnOthGcc12Application | 1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1.5 | OCTET STRING | read-create | Indicates the application transported by the GCC12 entity. Example applications are ECC, User data channel. The value of this object may not be changed when tnOthGcc12RowStatus has the value active(1). |
| I32 tnOthOdukTAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.9 | Integer32 | read-only | |
| tnOthOdukTTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10 | not-accessible | ||
| tnOthOdukTEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1 | not-accessible | ||
| ROW tnOthOdukTRowStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.3 | RowStatus | read-create | This columnar object is used for creating and deleting a conceptual row of tnOthOdukTable. It is used to model the addTCM and removeTCM operations of an ODUk_CTP or ODUk_TTP for Tandem connection monitoring as defined in ITU-T G.874.1. Setting RowStatus to createAndGo or createAndWait implies addTCM. Setting RowStatus to destroy implies removeTCM. |
| INT tnOthOdukTTcmMode | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.4 | INTEGER | read-create | Indicates the TCM termination mode. There are two valid values, termination or non-intrusive monitoring (NIM). An TCM entity is created either in termination mode or in NIM mode. |
| U32 tnOthOdukTPosSeq | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.5 | Unsigned32 | read-create | Indicates the relative position of the TCM monitor point. The lower the position sequence, the closer the TCM monitor point to the client/matrix. This means that the consequent action of the lower numbered position sequence TCM monitor point affects the higher numbered position sequence TCM monitor point. It is 1 by default. |
| ALU tnOthOdukTAdminStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.6 | AluWdmOdukStatus | read-create | ODUk TCM administrative state. It is used to suppress the alarms the ODU TCM entity. |
| OCT tnOthOdukTSapiTransmitted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.7 | OCTET STRING | read-create | The SAPI bytes in trace identifier transmitted in the TCM layer. This object is applicable when tnOthOdukDirectionality has the value source(2) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality is equal to sink(1). TXSAPI is the fist 16 Octets (TTI[0]-TTI[15]) TTI[0] (i.e., SAPI[0]) shall be fixed to all 0s. This object is applicable when tnOthOdukTTcmMode is equal to Termination. |
| OCT tnOthOdukTSapiExpected | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.8 | OCTET STRING | read-create | The SAPI expected by the receiver. This object has no effect when tnOthOdukTTimDetMode is equal to off(1). |
| OCT tnOthOdukTTraceIdentifierAccepted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.9 | OCTET STRING | read-only | The actual trace identifier accepted. This object is applicable only to the following three cases. (i) tnOthOdukDirectionality has the value bidirectional(3), or (ii) tnOthOdukDirectionality has the value sink(1) and tnOthOdukTCodirectional has the value true(1), or (iii) tnOthOdukDirectionality has the value source(3) and tnOthOdukTCodirectional has the value false(2). It must not be instantiated in rows for all other cases. The value of this object is unspecified when tnOthOdukTCurrentStatus indicates a near-end defect (i.e., oci(0), lck(1), ssf(5)) that prevents extraction of the trace message. It consists of the following three parts: - RXSAPI is the fist 16 Octets (TTI[0]-TTI[15]) - RXDAPI is the second 16 octets (TTI[16]-TTI[31]) - RXOS (operator specific) is the last 32 octets (TTI[32]-TTI[63]). TTI[0] (i.e., SAPI[0]) and TTI[16] (i.e., DAPI[0]) shall be fixed to all 0s. |
| ALU tnOthOdukTTimDetMode | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.10 | AluWdmTimDetMode | read-create | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. |
| T/F tnOthOdukTTimActEnabled | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.11 | TruthValue | read-create | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object has no effect when tnOthOdukTTimDetMode is equal to off(1). |
| ALU tnOthOdukTTtpTtiStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.12 | AluWdmTtiStatus | read-only | ODUkT TTI status. |
| INT tnOthOdukTAisOnDef | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.13 | INTEGER | read-create | Determines if consequent action of sending AIS will be taken on the TCM defect. enable enables Consequent Action of TCM defect, while disable disables Consequent Action of TCM defect. This object is applicable when tnOthOdukTTcmMode is equal to termination. |
| INT tnOthOdukTLtcResp | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.14 | INTEGER | read-create | LTC defect Response. This parameter determines whether a LTC defect contributes to the Consequent Action or not. It is disabled(2) by default. This object is applicable when tnOthOdukTTcmMode is equal termination. |
| T/F tnOthOdukTOhAdd | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.15 | TruthValue | read-create | Determines if the provisioned TCM Overhead is inserted or not. It is false by default. This object is applicable when tnOthOdukTTcmMode is equal to termination. |
| T/F tnOthOdukTOhRmv | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.16 | TruthValue | read-create | Determines if the received TCM Overhead is discarded or not. It is false by default. This object is applicable when tnOthOdukTTcmMode is equal to termination. |
| U32 tnOthOdukTcmIfIndex | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.17 | Unsigned32 | not-accessible | A unique index, greater than zero, for each ODU entity. This is the high-order index part. ------------------------------------------------------ | Bit31-Bit24 | Bit23-Bit16 | Bit15-Bit3 | Bit2-Bit0 | --------------+-------------+------------+------------ | 8 bits | 8 bits | 13 bits | 3 bits | --------------+-------------+------------+------------ | shelf | slot | HO-ODU | Reserved | | | | Number | as 0 | ------------------------------------------------------ |
| U32 tnOthOdukTcmIfIndexLo | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.18 | Unsigned32 | not-accessible | A unique index, greater than zero, for each ODU entity. This is the low-order index part. --------------------------------------------------------- | Bit31-Bit23 | Bit22-Bit18 | Bit17-Bit16 | Bit15-Bit10 | --------------+-------------+-------------+-------------+ | 9 bits | 5 bits | 2 bits | 6 bits | --------------+-------------+---------------+-----------+ | LO-ODU ID | HO-ODU | Reserved | Container | | | ODU Type | | Type | --------------------------------------------------------- ------------------------------------------ | Bit9-Bit7 | Bit6-Bit5 | Bit4-Bit0 | ------------+---------------+-----------+ | 3 bits | 2 bits | 5 bits | ------------+---------------+------------ | TCM Level | TCM Direction | LO-ODU | | (1-6) | (AM=1, BM=2) | ODU Type | ----------------------------------------- |
| U32 tnOthOdukTDegThr | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.19 | Unsigned32 | read-create | Specifies the burst threshold as a number of errored blocks on the ODU layer. A second is declared as good if the number of detected errored blocks within one second is less than tnOthOdukTDegThr, otherwise the second is declared as bad second. |
| U32 tnOthOdukTDegM | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.20 | Unsigned32 | read-create | Specifies the number of consecutive bad seconds to be detected before declaring a signal degrade defect on the ODU. The defect is cleared if tnOthOdukTDegM consecutive good seconds are detected. Current configurable range: 2 to 10. |
| OCT tnOthOdukTDapiAccepted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.21 | OCTET STRING | read-only | The DAPI bytes received. |
| OCT tnOthOdukTDapiExpected | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.22 | OCTET STRING | read-create | The DAPI bytes expected by the receiver. |
| OCT tnOthOdukTDapiTransmitted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.23 | OCTET STRING | read-create | The DAPI bytes transmitted. The TTI[17] to TTI[31] contain the 15-character destination access point identifie (DAPI). |
| OCT tnOthOdukTOsAccepted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.24 | OCTET STRING | read-only | The OS bytes received. |
| OCT tnOthOdukTOsTransmitted | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.25 | OCTET STRING | read-create | The OS bytes transmitted. The TTI[32] to TTI[63] contain the 32-character Operator Specific (OS). |
| OCT tnOthOdukTTcmAlmProfName | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.26 | OCTET STRING | read-create | |
| INT tnOthOdukTcmOperStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.27 | INTEGER | read-create | ODUk TCM Operational state. |
| INT tnOthOdukTcmMgracd | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.28 | INTEGER | read-create | Indicates if managed by CP, MGNPLN, shared by both or free. |
| U32 tnOthOdukTcmincstat | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.29 | Unsigned32 | read-only | Displays the accepted TCM stat byte value including status information. |
| TRO tnOthOdukTcmOperationalCapability | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.30 | TropicOperationalCapabilityType | read-only | ODUk TCM Operational Capability. |
| TRO tnOthOdukTcmStateQualifier | 1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.31 | TropicStateQualifierType | read-only | Indicates the state qualifier (i.e., the secondary state) of the ODUk TCM State. |
| I32 tnOthOdukXcAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.13 | Integer32 | read-only | |
| tnOthOdukXcTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14 | not-accessible | ||
| tnOthOdukXcEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1 | not-accessible | ||
| I32 tnOthOdukXcSrcIfIndex | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.1 | Integer32 | not-accessible | The interface index of the ODUk crossconnect source, high-order index part. |
| I32 tnOthOdukXcSrcIfIndexLo | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.2 | Integer32 | not-accessible | The interface index of the ODUk crossconnect source, low-order index part. |
| I32 tnOthOdukXcDestIfIndex | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.3 | Integer32 | not-accessible | The interface index of the ODUk crossconnect destination, high-order index part. |
| I32 tnOthOdukXcDestIfIndexLo | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.4 | Integer32 | not-accessible | The interface index of the ODUk crossconnect destination, low-order index part. |
| ROW tnOthOdukXcRowStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.5 | RowStatus | read-create | Currently all entries have a row status of active. Sets are permitted for the following values: - active(1) - createAndGo(4) - destroy(6). |
| U32 tnOthOdukXcId | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.6 | Unsigned32 | read-only | Contains shelf id and the connection id assigned by the system. ------------------+------------------ | Bit 31 - Bit 24 | Bit 23 - Bit 0 | ------------------+------------------ | 8 Bit | 24 Bit | ------------------+------------------ | Shelf ID | XCID or GroupID | ------------------+------------------. |
| ALU tnOthOdukXcRate | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.7 | AluWdmOthOdukXcRate | read-create | Indicates the ODUk entity rate. |
| T/F tnOthOdukXcBidirectional | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.8 | TruthValue | read-create | Indicates if this connection is unidirectional or bidirectional. |
| STR tnOthOdukXcName | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.9 | SnmpAdminString | read-create | The description of the ODUk XC. |
| INT tnOthOdukXcProtectionState | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.10 | INTEGER | read-only | The ODUk XC protection state. |
| OCT tnOthOdukXcTopology | 1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.11 | OCTET STRING | read-only | The ODUk XC topology expressed as port ifindex. |
| I32 tnOthOdukApsGroupAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.15 | Integer32 | read-only | |
| tnOthOdukApsGroupTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16 | not-accessible | ||
| tnOthOdukApsGroupEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1 | not-accessible | ||
| I32 tnOthOdukApsToIfIndex | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.1 | Integer32 | not-accessible | The interface Index (high-order part) of the ODUk entity within the SNCP. |
| I32 tnOthOdukApsToIfIndexLo | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.2 | Integer32 | not-accessible | The interface Index (low-order part) of the ODUk entity within the SNCP. |
| I32 tnOthOdukApsFromedIfIndex | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.3 | Integer32 | read-create | The interface Index (high-order part) of the ODUk entity in the working leg. |
| I32 tnOthOdukApsFromedIfIndexLo | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.4 | Integer32 | read-create | The interface Index (low-order part) of the ODUk entity in the working leg. |
| I32 tnOthOdukApsFromingIfIndex | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.5 | Integer32 | read-create | The interface Index (high-order part) of the ODUk entity in the protection leg. |
| I32 tnOthOdukApsFromingIfIndexLo | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.6 | Integer32 | read-create | The interface Index (low-order part) of the ODUk entity in the protection leg. |
| INT tnOthOdukApsAction | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.7 | INTEGER | read-create | The action command to control the APS group. Its value has an effect on the status of entries in tnOthOdukXcTable, tnOthOdukApsGroupTable, and tnOthOdukMemberTable. |
| STR tnOthOdukApsDescr | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.8 | SnmpAdminString | read-create | Description for the APS group. |
| INT tnOthOdukApsMode | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.9 | INTEGER | read-create | The protection type of the APS group. sncn - subnetwork connection with non-intrusive monitoring. sncnc - subnetwork connection based on ODUk client signal with non-intrusive monitoring. snci - subnetwork connection with inherent monitoring. |
| INT tnOthOdukApsRevert | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.10 | INTEGER | read-create | The revertive attribute of the APS group. |
| INT tnOthOdukApsDirection | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.11 | INTEGER | read-create | The protection direction of the APS Group. |
| INT tnOthOdukApsXcBidirectional | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.12 | INTEGER | read-create | It indicates the connection direction of the APS group. |
| U32 tnOthOdukApsWaitToRestore | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.13 | Unsigned32 | read-create | The wait-to-restore time for the revertive mode automatic switching. The values are in minutes. Current configurable range: 1 to 15. |
| U32 tnOthOdukApsHoldOffTimer | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.14 | Unsigned32 | read-create | Hold Off Time for automatic switching. Current configurable range: 0 to 10000. |
| APS tnOthOdukApsGroupK1K2Trans | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.15 | ApsK1K2 | read-create | This attribute is used to display the possible mapping of switch command and switch status to K1/K2 bytes. |
| INT tnOthOdukApsGroupMethod | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.16 | INTEGER | read-create | The protection method of the working leg. Default is pnim for sncn and sncnc, and padapt for snci. |
| INT tnOthOdukApsPingMethod | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.17 | INTEGER | read-create | The protection method of the protection leg. Default is pnim for sncn and sncnc, and padapt for snci. |
| T/F tnOthOdukApsSdEnable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.18 | TruthValue | read-create | Indicates whether or not Signal Degrade is used for protection switching. |
| BIT tnOthOdukApsCurrentStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.19 | Bits | read-only | The status of the APS group. |
| U32 tnOthOdukApsGroupID | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.20 | Unsigned32 | read-only | Contains shelf ID and the ID assigned to the APS group by the system. ------------------+------------------ | Bit 31 - Bit 24 | Bit 23 - Bit 0 | ------------------+------------------ | 8 Bit | 24 Bit | ------------------+------------------ | Shelf ID | GroupID | ------------------+------------------. |
| ALU tnOthOdukApsOduXcRate | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.21 | AluWdmOthOdukXcRate | read-only | Indicates the ODUk XC rate in the APS group. |
| INT tnOthOdukApsGroupCurrentStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.22 | INTEGER | read-only | Currently active switch request for a SNCP. |
| INT tnOthOdukApsSwitchCmd | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.23 | INTEGER | read-create | The switch command applied to the APS group. |
| INT tnOthOdukApsActSide | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.24 | INTEGER | read-only | Active side of the working ODUk entity in the APS group. |
| INT tnOthOdukApsFromedSfd | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.25 | INTEGER | read-only | The status of the working ODUk entity in the APS group. |
| INT tnOthOdukApsFromingSfd | 1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.26 | INTEGER | read-only | The status of the protection ODUk entity in the APS group. |
| I32 tnOthOdukMemberAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.17 | Integer32 | read-only | |
| tnOthOdukMemberTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.18 | not-accessible | ||
| tnOthOdukMemberEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1 | not-accessible | ||
| I32 tnOthOdukApsMemberIfIndex | 1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.1 | Integer32 | not-accessible | The interface Index (high-order part) for each ODU entity. |
| I32 tnOthOdukApsMemberIfIndexLo | 1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.2 | Integer32 | not-accessible | The interface Index (low-order part) for each ODU entity. |
| ROW tnOthOdukApsMemberRowStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.3 | RowStatus | read-create | Changing the row status is currently not supported. |
| INT tnOthOdukApsMemberConfigNumber | 1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.4 | INTEGER | read-create | |
| INT tnOthOdukApsMemberSwitch | 1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.5 | INTEGER | read-create | The switch command applied to the member of the APS group. |
| BIT tnOthOdukApsMemberCurrentStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.6 | Bits | read-only | The status of the ODUk entity in the APS group. |
| I32 tnOthOdukApsGroupIdAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.19 | Integer32 | read-only | |
| tnOthOdukApsGroupIdTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.20 | not-accessible | ||
| tnOthOdukApsGroupIdEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.20.1 | not-accessible | ||
| I32 tnOthOdukApsGroupIdToIfIndex | 1.3.6.1.4.1.7483.2.2.4.10.2.1.20.1.1 | Integer32 | read-only | The interface index (high-order part) of the ODUk entity with the APS group. |
| I32 tnOthOdukApsGroupIdToIfIndexLo | 1.3.6.1.4.1.7483.2.2.4.10.2.1.20.1.2 | Integer32 | read-only | The interface index (low-order part) of the ODUk entity with the APS group. |
| I32 tnOthOdukOptsgAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.21 | Integer32 | read-only | |
| tnOthOdukOptsgTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.22 | not-accessible | ||
| tnOthOdukOptsgEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.22.1 | not-accessible | ||
| STR tnOptsgStruct | 1.3.6.1.4.1.7483.2.2.4.10.2.1.22.1.1 | SnmpAdminString | read-create | The transmit OPTSG payload structure value. |
| STR tnIncOptsgStruct | 1.3.6.1.4.1.7483.2.2.4.10.2.1.22.1.2 | SnmpAdminString | read-only | The received OPTSG payload structure value. It is retrieved from the received OPTSG bytes. |
| I32 tnOthOdukDMConfigAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.23 | Integer32 | read-only | |
| tnOthOdukDMConfigTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.24 | not-accessible | ||
| tnOthOdukDMConfigEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.24.1 | not-accessible | ||
| INT tnOthOdukDMConfigCMEPMode | 1.3.6.1.4.1.7483.2.2.4.10.2.1.24.1.1 | INTEGER | read-create | Connection Monitoring End Point Mode defined for delay measurement on the specified ODUk entity. |
| INT tnOthOdukDMConfigEnable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.24.1.2 | INTEGER | read-create | This attribute is used to enable or disable the DM function. |
| I32 tnOthOdukDMInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.25 | Integer32 | read-only | |
| tnOthOdukDMInfoTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.26 | not-accessible | ||
| tnOthOdukDMInfoEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.26.1 | not-accessible | ||
| ALU tnOthOdukDMInfoCurrentStatus | 1.3.6.1.4.1.7483.2.2.4.10.2.1.26.1.1 | AluWdmDMInfoCurrentStatus | read-only | Indicates whether this DM test is valid. |
| U32 tnOthOdukDMInfoCurrentValue | 1.3.6.1.4.1.7483.2.2.4.10.2.1.26.1.2 | Unsigned32 | read-only | Reports the DM value in 10**(-7) seconds in the current Interval. |
| I32 tnOthOdukIncFtflInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.4.10.2.1.27 | Integer32 | read-only | |
| tnOthOdukIncFtflInfoTable | 1.3.6.1.4.1.7483.2.2.4.10.2.1.28 | not-accessible | ||
| tnOthOdukIncFtflInfoEntry | 1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1 | not-accessible | ||
| OCT tnOthOdukIncFtflFwTypeID | 1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1.1 | OCTET STRING | read-only | ODUk incoming forward fault type and fault location (FTFL) type ID. |
| OCT tnOthOdukIncFtflFwOperID | 1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1.2 | OCTET STRING | read-only | ODUk incoming forward FTFL operator ID. |
| OCT tnOthOdukIncFtflBwTypeID | 1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1.3 | OCTET STRING | read-only | ODUk incoming backward FTFL type ID. |
| OCT tnOthOdukIncFtflBwOperID | 1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1.4 | OCTET STRING | read-only | ODUk incoming backward FTFL operator ID. |
| OCT tnOthOdukIncFtflExp | 1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1.5 | OCTET STRING | read-only | ODUk incoming exp (experimental). |
RFC description
Manages ODUk and optical channel configurations for Nokia DWDM equipment.
Start monitoring Nokia (Alcatel-Lucent) Tropic DWDM optical transport network element (OTN framing overhead/error status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.