TROPIC-GMPLS-LSP-MIB

All MIBs › TROPIC-GMPLS-LSP-MIB

Organization: Nokia

Last Updated: 2013-08-12

Category: Nokia Optical Transport

Description: Manages Nokia Tropic GMPLS label-switched path provisioning and status in optical transport networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TROPIC-GMPLS-LSP-MIB?

TROPIC-GMPLS-LSP-MIB is a Nokia MIB (from the Tropic/1830 WDM product line, formerly Alcatel-Lucent) for provisioning and monitoring GMPLS label-switched paths (LSPs) in optical transport networks, extended to support Layer 0 (photonic/wavelength) switching for the 1830 R7.0 WDM platform. It exposes configuration and operational data describing GMPLS LSP setup, routing, and status across DWDM/optical network elements. This MIB is used to monitor the software/control-plane status of optical LSPs, letting operators confirm an LSP is successfully signaled and up, or detect a failed or degraded path that would disrupt an optical circuit. It builds on the broader GMPLS/MPLS-TE MIB framework and relies on the underlying optical transport (WDM/L0) topology and TE-link MIBs for its data model. It is typically deployed in metro/core optical transport networks where Nokia 1830 WDM platforms provide dynamically routed optical connectivity. Engineers can download the TROPIC-GMPLS-LSP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-GMPLS-LSP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia 1830 WDM optical transport platform
GMPLS-capable optical network element

Monitoring Examples

No sample object or table names were provided for this module, so a concrete monitoring walkthrough cannot be grounded in real identifiers; generally an operator would poll per-LSP state objects to verify an optical GMPLS LSP remains signaled and up, and would be alerted if a path transitioned to a down or failed state due to a fiber cut or node failure.

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

From TROPIC-GLOBAL-REG

tnGmplsMIBModules	OBJECT-IDENTITY
tnGmplsObjs	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
tnGmplsLspMibModule	1.3.6.1.4.1.7483.1.1.2.6.3			Extended version for support of L0 for 1830 R7.0 WDM.
tnGmplsLspMIB	1.3.6.1.4.1.7483.2.1.10.1.3
tnGmplsLspObjs	1.3.6.1.4.1.7483.2.1.10.1.3.1
I32 tnGmplsLspAttributeTotal	1.3.6.1.4.1.7483.2.1.10.1.3.1.1	Integer32	read-only	Total number of attributes in this MIB file.
tnGmplsLspTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.2		not-accessible	The tnGmplsLspTable.
tnGmplsLspEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1		not-accessible	An entry in this table represents an GMPLS LSP.
U32 tnGmplsLspSrcLspId	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.1	Unsigned32	not-accessible	Local LSP Id. Uniquely identifies this row.
STR tnGmplsLspDescr	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.2	DisplayString	read-create	LSP description.
STR tnGmplsLspIngressResource	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.3	DisplayString	read-create	Source link + label. Format is: [/]+ with : Id with range of 32bit int : Id in rrsbbpp01 format Can only be set at LSP creation. This parameter is mandatory for LSP creation.
STR tnGmplsLspEgressResource	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.4	DisplayString	read-create	Destination link + label. Format is: [//]+ with : Id with range 32bit int : Id in rrsbbpp01 format Can only be set at LSP creation. This parameter is mandatory.
U32 tnGmplsLspDestLsrId	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.5	Unsigned32	read-only	CP Node Id of the destination node of this LSP.
I32 tnGmplsLspSetupPrio	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.6	Integer32	read-create	Indicates the setup priority of this tunnel.
I32 tnGmplsLspHoldingPrio	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.7	Integer32	read-create	Indicates the holding priority for this tunnel.
INT tnGmplsLspDirectionType	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.8	INTEGER	read-create	Whether this tunnel carries forward data only (is unidirectional) or is bidirectional.
INT tnGmplsLspTrafficType	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.9	INTEGER	read-create	Service traffic of the Lsp. This parameter is mandatory for creation.
INT tnGmplsLspProtectionType	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.10	INTEGER	read-create	Protection or Restoration mechanism used by the LSP. This parameter is mandatory for creation.
INT tnGmplsLspReversionMode	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.11	INTEGER	read-create	Reversion trigger definition.
U32 tnGmplsLspIncludeAnyAffinity	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.12	Unsigned32	read-create	Include any color.
U32 tnGmplsLspExcludeAnyAffinity	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.13	Unsigned32	read-create	Exclude any color.
INT tnGmplsLspConnectionType	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.14	INTEGER	read-only	SPC or SC LSP.
INT tnGmplsLspAdminStatus	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.15	INTEGER	read-create	Administrative state.
STR tnGmplsLspDiversityLspList	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.16	DisplayString	read-create	List of LspId the LSP shall be diverse to. Comma separated list of unsigned integers.
U32 tnGmplsLspLatencyThreshold	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.17	Unsigned32	read-create	Latency constraint.
U32 tnGmplsLspMaxHopsConstraint	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.18	Unsigned32	read-create	Maximum number of hops that must not be exceeded for backups. 0 means no constraint.
INT tnGmplsLspActions	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.19	INTEGER	read-create	Actions that apply on the LSP when setting this attribute. Values other than none are only allowed when the STATUS=active. Otherwise the action is ignored and remains with value none.
ALU tnGmplsLspProtectionStateMain	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.20	AluWdmGmplsLspProtectionState	read-only	Current protection state main leg.
ALU tnGmplsLspProtectionStateSpare	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.21	AluWdmGmplsLspProtectionState	read-only	Current protection state spare leg.
INT tnGmplsLspReversionState	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.22	INTEGER	read-only	Current reversion state.
T/F tnGmplsLspSRGViolation	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.23	TruthValue	read-only	True if current route violates SRG diversity.
T/F tnGmplsLspColorViolation	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.24	TruthValue	read-only	True if current route violates color constraints.
T/F tnGmplsLspOptFsbltyViolation	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.25	TruthValue	read-only	Current route violates optical constraints.
T/F tnGmplsLspQoSViolation	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.26	TruthValue	read-only	Current path has QoS threshold crossed.
T/F tnGmplsLspLatencyViolation	1.3.6.1.4.1.7483.2.1.10.1.3.1.2.1.27	TruthValue	read-only	Current path exceeds the latency threshold.
tnGmplsLspFlowTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.3		not-accessible	The tnGmplsLspFlowTable.
tnGmplsLspFlowEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.3.1		not-accessible	An entry in this table represents an GMPLS LSP flow. A LSP may have 0..n flows. A flow has always one LSP.
U32 tnGmplsLspFlowSrcLspId	1.3.6.1.4.1.7483.2.1.10.1.3.1.3.1.1	Unsigned32	not-accessible	LSP FlowList Index 1st part. Uniquely identifies a flow within this table.
INT tnGmplsLspFlowType	1.3.6.1.4.1.7483.2.1.10.1.3.1.3.1.2	INTEGER	not-accessible	LSP FlowList Index 2nd part. Indicates whether this flow is in nominal or backup role.
INT tnGmplsLspFlowState	1.3.6.1.4.1.7483.2.1.10.1.3.1.3.1.3	INTEGER	read-only	Indicates the operational state of this flow.
U32 tnGmplsLspFlowId	1.3.6.1.4.1.7483.2.1.10.1.3.1.3.1.4	Unsigned32	read-only	LSP Flow Id.
tnGmplsLspCHopTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.4		not-accessible	The tnGmplsLspFlowTable.
tnGmplsLspCHopEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.4.1		not-accessible	An entry in this table represents a hop of a GMPLS LSP flow. A flow has 0..n hops, a hop belongs always to one flow.
U32 tnGmplsLspCHopSrcLspId	1.3.6.1.4.1.7483.2.1.10.1.3.1.4.1.1	Unsigned32	not-accessible	Local LSP Id. Uniquely identifies this row.
INT tnGmplsLspCHopRouteType	1.3.6.1.4.1.7483.2.1.10.1.3.1.4.1.2	INTEGER	not-accessible	2nd part of the index. The type of route of the LSP.
U32 tnGmplsLspCHopIndex	1.3.6.1.4.1.7483.2.1.10.1.3.1.4.1.3	Unsigned32	not-accessible	3rd part of the index. LSP Hop Index. Uniquely identifies a hop in a route.
U32 tnGmplsLspCHopSubnodeId	1.3.6.1.4.1.7483.2.1.10.1.3.1.4.1.4	Unsigned32	read-create	Subnode Id (aka DPNodeId) of the hop. Uniquely identifies logical node in the network.
STR tnGmplsLspCHopInResource	1.3.6.1.4.1.7483.2.1.10.1.3.1.4.1.5	DisplayString	read-create	Ingress link + label of this hop. Format is: [//]+ with : Id with range { 100000 .. 999999} : Id in rrsbbpp01 format : 32bit value according to draft-ietf-ccamp-gmpls-g-694-lambda-labels-05 At intermediate and tail hops this parameter is empty for nominal routes. For drop ports the TELinks can be 0, i.e. empty.
STR tnGmplsLspCHopOutResource	1.3.6.1.4.1.7483.2.1.10.1.3.1.4.1.6	DisplayString	read-create	Egress link + label of this hop. Format is: [//]+ with : Id with range { 100000 .. 999999} : Id in rrsbbpp01 format : 32bit value according to draft-ietf-ccamp-gmpls-g-694-lambda-labels-05 For drop ports the TELinks can be 0, i.e. empty.
tnGmplsLspAHopTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.5		not-accessible	The tnGmplsLspFlowTable.
tnGmplsLspAHopEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.5.1		not-accessible	An entry in this table represents a hop of a GMPLS LSP flow. A flow has 0..n hops, a hop belongs always to one flow.
U32 tnGmplsLspAHopSrcLspId	1.3.6.1.4.1.7483.2.1.10.1.3.1.5.1.1	Unsigned32	not-accessible	Local LSP Id. Uniquely identifies this row.
INT tnGmplsLspAHopRouteType	1.3.6.1.4.1.7483.2.1.10.1.3.1.5.1.2	INTEGER	not-accessible	2nd part of the index. The type of route of the LSP.
U32 tnGmplsLspAHopIndex	1.3.6.1.4.1.7483.2.1.10.1.3.1.5.1.3	Unsigned32	not-accessible	3rd part of the index. LSP Hop Index. Uniquely identifies a hop in a route.
U32 tnGmplsLspAHopSubnodeId	1.3.6.1.4.1.7483.2.1.10.1.3.1.5.1.4	Unsigned32	read-only	Subnode Id (aka DPNodeId) of the hop. Uniquely identifies logical node in the network.
STR tnGmplsLspAHopInResource	1.3.6.1.4.1.7483.2.1.10.1.3.1.5.1.5	DisplayString	read-only	Ingress link + label of this hop. Format is: [//]+ with : Id with range { 100000 .. 999999} : Id in rrsbbpp01 format : 32bit value according to draft-ietf-ccamp-gmpls-g-694-lambda-labels-05 At intermediate and tail hops this parameter is empty for nominal routes. For drop ports the TELinks can be 0, i.e. empty.
STR tnGmplsLspAHopOutResource	1.3.6.1.4.1.7483.2.1.10.1.3.1.5.1.6	DisplayString	read-only	Egress link + label of this hop. Format is: [//]+ with : Id with range { 100000 .. 999999} : Id in rrsbbpp01 format : 32bit value according to draft-ietf-ccamp-gmpls-g-694-lambda-labels-05 For drop ports the TELinks can be 0, i.e. empty.
tnGmplsLspExcludeTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.6		not-accessible	The tnGmplsLspExcludeTable.
tnGmplsLspExcludeEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.6.1		not-accessible	An entry in this table represents an excluded diversity link (either databearer or TELink) of a GMPLS LSP.
U32 tnGmplsLspExcludeSrcLspId	1.3.6.1.4.1.7483.2.1.10.1.3.1.6.1.1	Unsigned32	not-accessible	Local LSP Id. Uniquely identifies this row.
U32 tnGmplsLspExcludeIndex	1.3.6.1.4.1.7483.2.1.10.1.3.1.6.1.2	Unsigned32	not-accessible	2nd part of the index. The index of the exclude link item in the list of excludes.
U32 tnGmplsLspExcludeSubnodeId	1.3.6.1.4.1.7483.2.1.10.1.3.1.6.1.3	Unsigned32	read-create	Subnode Id (aka DPNodeId) of the TE or DB link. Uniquely identifies logical node in the network.
U32 tnGmplsLspExcludeTELink	1.3.6.1.4.1.7483.2.1.10.1.3.1.6.1.4	Unsigned32	read-create	TELink that shall be excluded.
U32 tnGmplsLspExcludeDBLink	1.3.6.1.4.1.7483.2.1.10.1.3.1.6.1.5	Unsigned32	read-create	DBLink that shall be excluded.
tnGmplsLspTransactionTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.7		not-accessible	The tnGmplsLspTransactionTable.
tnGmplsLspTransactionEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.7.1		not-accessible	An entry in this table represents a exclude diversity link (either databearer or TELink) of a GMPLS LSP.
U32 tnGmplsLspTransactionSrcLspId	1.3.6.1.4.1.7483.2.1.10.1.3.1.7.1.1	Unsigned32	not-accessible	Local LSP Id. Uniquely identifies this row.
INT tnGmplsLspTransaction	1.3.6.1.4.1.7483.2.1.10.1.3.1.7.1.2	INTEGER	read-create	Write-only parameter. Actions to commit or rollback pending changes or to delete a LSP.
INT tnGmplsLspTransactionState	1.3.6.1.4.1.7483.2.1.10.1.3.1.7.1.3	INTEGER	read-only	Transaction state of the LSP.
tnGmplsLspToPortTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.8		not-accessible	The tnGmplsLspToPortTable.
tnGmplsLspToPortEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.8.1		not-accessible	Each entry represents a Port used by LSP relation. This is a read-only table.
U32 tnGmplsLspDBLinkIfId	1.3.6.1.4.1.7483.2.1.10.1.3.1.8.1.1	Unsigned32	not-accessible	ID of the DBLink.
U32 tnGmplsLspLTPSrcLspId	1.3.6.1.4.1.7483.2.1.10.1.3.1.8.1.2	Unsigned32	not-accessible	Source LSP Id,
U32 tnGmplsLspSrcLsrId	1.3.6.1.4.1.7483.2.1.10.1.3.1.8.1.3	Unsigned32	not-accessible	Source LSR Id.
STR tnGmplsLspName	1.3.6.1.4.1.7483.2.1.10.1.3.1.8.1.4	DisplayString	read-only	LSP name.
tnGmplsLspSncpMgmtTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.9		not-accessible	The tnGmplsLspSncpMgmtTable.
tnGmplsLspSncpMgmtEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.9.1		not-accessible	Each entry represents a Port used by LSP relation.
OCT tnGmplsLspSncpCtpResource	1.3.6.1.4.1.7483.2.1.10.1.3.1.9.1.1	OCTET STRING	not-accessible	Index of the table. The drop CTP of the LSP at head or tail node. Format of the String: / with : Data link If Id : value according to draft-ietf-ccamp-gmpls-g-694-lambda-labels-05
INT tnGmplsLspSncpDirection	1.3.6.1.4.1.7483.2.1.10.1.3.1.9.1.2	INTEGER	not-accessible	Second part of the index: domain internal SNCP. CTP resource + direction identify the SNCP entity.
INT tnGmplsLspSncpCmd	1.3.6.1.4.1.7483.2.1.10.1.3.1.9.1.3	INTEGER	read-create	SNCP commands send to the LSP.
INT tnGmplsLspSncpState	1.3.6.1.4.1.7483.2.1.10.1.3.1.9.1.4	INTEGER	read-only	SNCP state of the LSP.
ROW tnGmplsLspSncpRowStatus	1.3.6.1.4.1.7483.2.1.10.1.3.1.9.1.5	RowStatus	read-create	This variable is used to modify a row in this table. Supported values for this table are: active => activate new SNCP configuration. notInService => SNCP configuration is pending, not active. notReady => information missing, configuration is not used. Creation and deletion of row entries are not allowed.
tnGmplsLspNextIndexTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.10		not-accessible	The tnGmplsLspNextIndexTable.
tnGmplsLspNextIndexEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.10.1		not-accessible	This table contains the next appropriate value to be used for tnGmplsLspSrcLspId when creating entries in tnGmplsLspTable. Note: a GET on this table will create a LSP object in the GMPLS. The usage of a scalar is not possible because Emanate does not make any difference between GET and GETNEXT scenarios for scalars.
U32 tnGmplsLspNextIndexTableIndex	1.3.6.1.4.1.7483.2.1.10.1.3.1.10.1.1	Unsigned32	not-accessible	Uniquely identifies this row. There is only one entry in this table.
U32 tnGmplsLspNextIndex	1.3.6.1.4.1.7483.2.1.10.1.3.1.10.1.2	Unsigned32	read-only	The new reserved LSP index.
tnGmplsMoveLspToTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.11		not-accessible	The tnGmplsMoveLspToTable.
tnGmplsMoveLspToEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.11.1		not-accessible	This table describes the move-LSP-to actions on a GMPLS LSP.
U32 tnGmplsMoveLspToSrcLspId	1.3.6.1.4.1.7483.2.1.10.1.3.1.11.1.1	Unsigned32	not-accessible	Local LSP Id. Uniquely identifies this row.
INT tnGmplsMoveLspToCmd	1.3.6.1.4.1.7483.2.1.10.1.3.1.11.1.2	INTEGER	read-create	The move LSP To command.
ROW tnGmplsMoveLspToRowStatus	1.3.6.1.4.1.7483.2.1.10.1.3.1.11.1.3	RowStatus	read-create	This variable is used to modify a row in this table. Supported values for this table are: active => activate the MOVE TO command. notInService => current configuration is pending and not used by NE. notReady => information missing, configuration is not used. Creation and deletion of row entries are not allowed.
tnGmplsMoveLspFromTable	1.3.6.1.4.1.7483.2.1.10.1.3.1.12		not-accessible	The tnGmplsMoveLspFromTable.
tnGmplsMoveLspFromEntry	1.3.6.1.4.1.7483.2.1.10.1.3.1.12.1		not-accessible	This table describes the exclude links constraints of a LSP and is used for the Link Diversity and move-from feature of the GMPLS.
U32 tnGmplsMoveLspFromSrcLspId	1.3.6.1.4.1.7483.2.1.10.1.3.1.12.1.1	Unsigned32	not-accessible	Local LSP Id. Uniquely identifies this row.
OCT tnGmplsMoveLspFromLinks	1.3.6.1.4.1.7483.2.1.10.1.3.1.12.1.2	OCTET STRING	read-create	LSP link diversity list. This is a comma separated list of DPNodeId/TeLink[/DB] the LSP should be diverse to.
INT tnGmplsMoveLspFromCmd	1.3.6.1.4.1.7483.2.1.10.1.3.1.12.1.3	INTEGER	read-create	The move LSP From command.
ROW tnGmplsMoveLspFromRowStatus	1.3.6.1.4.1.7483.2.1.10.1.3.1.12.1.4	RowStatus	read-create	This variable is used to modify a row in this table. Supported values for this table are: active => activate the MOVE FROM command. notInService => current configuration is pending and not used by NE. notReady => information missing, configuration is not used. Creation and deletion of row entries are not allowed.
tnGmplsLspConf	1.3.6.1.4.1.7483.2.1.10.1.3.3
tnGmplsLspGroups	1.3.6.1.4.1.7483.2.1.10.1.3.3.1
tnGmplsLspObjsGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.1
tnGmplsLspGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.2			The GMPLS Lsp group of objects providing for management of GMPLS LSP entities.
tnGmplsLspFlowGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.3
tnGmplsLspCHopGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.4
tnGmplsLspAHopGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.5
tnGmplsLspExcludeGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.6
tnGmplsLspTransactionGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.7
tnGmplsLspToPortGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.8
tnGmplsLspSncpMgmtGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.9
tnGmplsLspNextIndexGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.10
tnGmplsMoveLspToGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.11
tnGmplsMoveLspFromGroup	1.3.6.1.4.1.7483.2.1.10.1.3.3.1.12
tnGmplsLspCompliances	1.3.6.1.4.1.7483.2.1.10.1.3.3.2
tnGmplsLspCompliance	1.3.6.1.4.1.7483.2.1.10.1.3.3.2.1			The compliance statement for SNMPv2 entities which implement GMPLS NE.

RFC description

Manages GMPLS label switched paths (LSPs) and optical circuit configuration.

Start monitoring Nokia 1830 WDM optical transport platform, GMPLS-capable optical network element (label-switched-path signaling/oper status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TROPIC-GMPLS-LSP-MIB

What Is TROPIC-GMPLS-LSP-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description