TROPIC-SOFTWARE-MIB

All MIBs › TROPIC-SOFTWARE-MIB

Organization: Nokia

Last Updated: 2016-02-29

Category: Nokia Optical Transport

Description: Manages Nokia Tropic software version, upgrade state, and package management for optical transport.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TROPIC-SOFTWARE-MIB?

TROPIC-SOFTWARE-MIB is part of Nokia's Tropic DWDM MIB suite, dedicated to software loading, version tracking, and package management on the optical transport network element. It exposes objects describing installed software versions, upgrade/loading state, and package management operations. Its monitoring focus is explicitly software status: tracking which software version is active, whether an upgrade is in progress or has completed, and whether a package load has succeeded or failed, which is critical for coordinating firmware rollouts across a DWDM network without service disruption. It complements the hardware-focused Tropic MIBs (such as TROPIC-AMPLIFIER-MIB and TROPIC-OCH-MIB) as the software-management counterpart within the same suite. It is deployed on Nokia DWDM optical transport network elements in service-provider optical backbone networks. Engineers can download the TROPIC-SOFTWARE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-SOFTWARE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia (Alcatel-Lucent) Tropic DWDM optical transport network element

Monitoring Examples

No sample object names were provided for this module. Based on its description as the Software Loading MIB, an admin would typically poll the active software version and upgrade/loading-state objects to confirm a firmware package has been successfully loaded and activated, with a stalled or failed loading state indicating an upgrade that needs to be retried or rolled back.

What Can Be Monitored

active software version
software upgrade/loading state
package management status

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

From TROPIC-GLOBAL-REG

tnSoftwareMIB	OBJECT-IDENTITY
tnSystemModules	OBJECT-IDENTITY

From TROPIC-SHELF-MIB

tnShelfIndex

OBJECT-TYPE

From TROPIC-SLOT-MIB

tnSlotIndex

OBJECT-TYPE

From TROPIC-TC

AluWdmTransferProtocol
TnCommand
TropicShelfIndexType
TropicSlotIndexType

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR tnFwCardCurrentBundle	1.3.6.1.4.1.7483.2.1.5.2.1.5.1.1	SnmpAdminString	read-only	The filename of the bundle of firmware that is currently loaded in the card, for example, _i.j.k. This is updated on each warm and cold restart by comparing the version registers of each FPGA against the list of version registers in the profile.
tnFwCardEntry	1.3.6.1.4.1.7483.2.1.5.2.1.5.1		not-accessible
tnFwCardGroup	1.3.6.1.4.1.7483.2.1.5.1.1.5
STR tnFwCardLoadBundle	1.3.6.1.4.1.7483.2.1.5.2.1.5.1.3	SnmpAdminString	read-create	The revision code portion of filename of the bundle of firmware that is to be loaded in the card at the next cold reset; the i.j[.k] portion of _i.j[.k]. When .k is not specified, the file with the numerically highest value of k is used. When the is not specified, the word profile will be used in its place, e.g. profile_1.1.0. When the and the are not specified, the resulting string will be profile_default.
U32 tnFwCardLoadedAt	1.3.6.1.4.1.7483.2.1.5.2.1.5.1.2	Unsigned32	read-only	The time at which the named firmware bundle was last successfully loaded (seconds from 1970).
INT tnFwCardLoadState	1.3.6.1.4.1.7483.2.1.5.2.1.5.1.5	INTEGER	read-only	The state of the firmware load process for the card as a whole. This uses conditions FPGAInit[1-10] raised by Board Manager, which will also update the ECId.
U32 tnFwCardProvisionedAt	1.3.6.1.4.1.7483.2.1.5.2.1.5.1.4	Unsigned32	read-only	The time at which the provisioned firmware bundle name was changed for this card (seconds from 1970).
STR tnFwCardProvisioningInfo	1.3.6.1.4.1.7483.2.1.5.2.1.5.1.7	SnmpAdminString	read-only	FPGA card provisioning information for up to 10 profiles. The information for each profile contains the following 5 fields: NGOCC 01 static 40020402 hitless where NGOCC - FPGA name of this profile. 01 - Vendor/hardware realization variant of a profile. static - FPGA type, static or dynamic. 40020402 - Version. hitless - Status. Software developers are working out the details of the arrangement of these fields.
tnFwCardTable	1.3.6.1.4.1.7483.2.1.5.2.1.5		not-accessible	Firmware Maintenance on a per card basis.
U32 tnFwCardWatchDog	1.3.6.1.4.1.7483.2.1.5.2.1.5.1.6	Unsigned32	read-only	This is the time since the beginning of the init state for the individual FPGA device currently being loaded. It is updated only when requested for display. Timeout starts at 45 minutes. Progress time displayed will be = 45:00-current value.
tnFwHitlessCardEntry	1.3.6.1.4.1.7483.2.1.5.2.1.9.1		not-accessible
tnFwHitlessCardGroup	1.3.6.1.4.1.7483.2.1.5.1.1.9
INT tnFwHitlessCardLoadState	1.3.6.1.4.1.7483.2.1.5.2.1.9.1.2	INTEGER	read-only	The state of the firmware hitless load process for the card as a whole. This uses conditions FPGAINITNSA[1-10] raised by Board Manager, which will also update the ECId.
tnFwHitlessCardTable	1.3.6.1.4.1.7483.2.1.5.2.1.9		not-accessible	Firmware Hitless Maintenance on a per card basis.
T/F tnFwHitlessCardTrigger	1.3.6.1.4.1.7483.2.1.5.2.1.9.1.1	TruthValue	read-create	Hitless - Provisioned firmware package will be loaded to the card by performing a warm reboot.
U32 tnFwHitlessCardWatchDog	1.3.6.1.4.1.7483.2.1.5.2.1.9.1.3	Unsigned32	read-only	This is the time since the beginning of the init state for the individual FPGA Hitless device currently being loaded. It is updated only when requested for display. Timeout starts at 45 minutes. Progress time displayed will be = 45:00-current value.
U32 tnInstalledFwCardType	1.3.6.1.4.1.7483.2.1.5.2.1.6.1.1	Unsigned32	not-accessible	Supported values in R1.1: 11dpge12 - 1 11star1 - 2 11stge12 - 3 11stmm10 - 4 ahphg - 5 alphg - 6 cwr8 - 7 dcm - 8 ec - 9 opsa - 10 sfc1a - 11 sfc1b - 12 sfc1c - 13 sfc1d - 14 sfc1e - 15 sfc1f - 16 sfc1g - 17 sfc1h - 18 sfc2a - 19 sfc2b - 20 sfc2c - 21 sfc2d - 22 sfc4a - 23 sfc4b - 24 sfc8 - 25 sfd44 - 26 sfd5a - 27 sfd5b - 28 sfd5c - 29 sfd5d - 30 sfd5e - 31 sfd5f - 32 sfd5g - 33 sfd5h - 34 svac - 35 R2.0: 4dpa4 - 36 cwr8-88 - 37 sfd44b - 38 itlb - 39 ahplg - 40 43stx4 - 41 R2.5: alpfgk - 42 osc - 43 4dpa2 - 44 sfd8a - 45 sfd8b - 46 sfd8c - 47 sfd8d - 48 43sta1p - 49 43stx4p - 50 11qpa4 - 51 sfd40 - 52 sfd40b - 53 a2325a - 54 112scx10 - 55 112sca1 - 56 alpfgt - 57 osct - 58 R2.9: flc - 59 mt0c - 60 mt3t8 - 61 mt1t9 - 62 R3.0: wtocm - 63 wr2-88 - 64 pss4ec - 65 am2017b - 66 am2325b - 67 1dpp21 - 68 sfd4a - 69 sfd4b - 70 sfd4c - 71 sfd4d - 72 sfd4e - 73 sfd4f - 74 sfd4g - 75 sfd4h - 76 mvac - 77 R3.1.5: 43scx4 - 78 R3.5: ra2p - 79 am2318a - 80 am2125a - 81 itlu - 82 wr8c88a - 83 11dpe12e - 84 112sx10l - 85 112sa1l - 86 11dpm12 - 87 mesh4 - 88 R3.6: 43sca1 - 89 43scx4l - 90 am2125b - 91 mxec - 92 mxslc - 93 eosm - 94 eosul - 95 R3.6.5: 112snx10 - 96 112sna1 - 97 11qta4 - 98 -- obsolete 1dpp24m - 99 ul43scup - 100 ul11qcup - 101 11qpen4 - 102 43scx4e - 103 43scge1 - 104 11qpe24 - 105 R5.0: 11star1a - 106 mvac8b - 107 wr8c88af - 108 R5.1: opsb - 111 11dpe12a - 112 R5.5: cl10an10g - 109 cl24anm - 110 ul130scup - 113 130scx10 - 114 a2p2125 - 115 4qpa8 - 116 112pdm11 - 117 wtocma - 118 ptpctl - 119 ptpio - 120 24et1gb - 121 4an10g - 122 8et1gb - 123 10et10g - 124 11qcupc - 125 520scx4 - 126 R6.0.6: ot130snx10 - 132 ot130sca1 - 140 R7.0: 11ope8 - 127 11qce12x - 128 am2625a - 129 am2032a - 130 ot260scx2 - 131 io24anmb - 133 ot11dpm8 - 134 ot11dpm4m - 135 ot11dpm4e - 136 ul130scupb - 137 ot112sdx11 - 138 aa2donw - 139 io10an10gb - 141 io10et10gb - 142 psc1-6 - 143 wr20tf - 144 wtocmf - 145 R7.0.2: aswg - 146 a4pswg - 147 otdr - 148 wr20-tfm - 149 aar-8a - 150 mcs8-16 - 151 msh8-fsm - 152 mfc - 174 sc - 175 R8.0: io4an100g - 153 io30an10g - 154 io30an300 - 155 io4an400 - 156 12p120 - 157 20p200 - 158 1ud200 - 159 ot130snq10 - 160 iroadmv - 161 iroadmf - 162 monocm - 163 monotdr - 169 pss96powerfilter - 170 R9.0: ul2uc400 - 164 ul4uc400 - 165 ul20uc200 - 166 d5x500 - 167 ots11m100 - 168 12ce120 - 171 1ce100 - 172 lci1000 - 173 cec2 - 176.
tnInstalledFwEntry	1.3.6.1.4.1.7483.2.1.5.2.1.6.1		not-accessible	An entry of the installed firmware table
STR tnInstalledFwFileName	1.3.6.1.4.1.7483.2.1.5.2.1.6.1.2	SnmpAdminString	read-only	This attribute contains the name of the firmware file for files with links, it specifies the target file name.
tnInstalledFwGroup	1.3.6.1.4.1.7483.2.1.5.1.1.6
T/F tnInstalledFwIsDefault	1.3.6.1.4.1.7483.2.1.5.2.1.6.1.3	TruthValue	read-only	This attribute specifies if the software is default.
tnInstalledFwPortGroupEntry	1.3.6.1.4.1.7483.2.1.5.2.1.8.1		not-accessible
STR tnInstalledFwPortGroupFw	1.3.6.1.4.1.7483.2.1.5.2.1.8.1.2	SnmpAdminString	not-accessible	The valid port group firmware version number associated with the port group mode.
tnInstalledFwPortGroupGroup	1.3.6.1.4.1.7483.2.1.5.1.1.8
T/F tnInstalledFwPortGroupIsDefault	1.3.6.1.4.1.7483.2.1.5.2.1.8.1.3	TruthValue	read-only	This attribute specifies if the software is default.
ALU tnInstalledFwPortGroupMode	1.3.6.1.4.1.7483.2.1.5.2.1.8.1.1	AluWdmPortGroupMode	not-accessible	The valid port group mode in the card firmware profile.
tnInstalledFwPortGroupTable	1.3.6.1.4.1.7483.2.1.5.2.1.8		not-accessible
tnInstalledFwTable	1.3.6.1.4.1.7483.2.1.5.2.1.6		not-accessible	This object describes the firmware available on the EC
tnPortGroupEntry	1.3.6.1.4.1.7483.2.1.5.2.1.7.1		not-accessible
STR tnPortGroupFwCurrent	1.3.6.1.4.1.7483.2.1.5.2.1.7.1.3	SnmpAdminString	read-only	The current port group firmware version that is running on the FPGA.
STR tnPortGroupFwDownload	1.3.6.1.4.1.7483.2.1.5.2.1.7.1.2	SnmpAdminString	read-create	The port group firmware version to be downloaded. A null value means the preferred version for the selected mode in the active card firmware profile.
tnPortGroupGroup	1.3.6.1.4.1.7483.2.1.5.1.1.7
ALU tnPortGroupMode	1.3.6.1.4.1.7483.2.1.5.2.1.7.1.1	AluWdmPortGroupMode	read-create	Port group mode is a synonym for the applied FPGA firmware type.
tnPortGroupTable	1.3.6.1.4.1.7483.2.1.5.2.1.7		not-accessible
tnSoftwareBasics	1.3.6.1.4.1.7483.2.1.5.2.1
tnSoftwareCompliance	1.3.6.1.4.1.7483.2.1.5.1.2.1
tnSoftwareCompliances	1.3.6.1.4.1.7483.2.1.5.1.2
tnSoftwareConf	1.3.6.1.4.1.7483.2.1.5.1
tnSoftwareGroups	1.3.6.1.4.1.7483.2.1.5.1.1
tnSoftwareMibModule	1.3.6.1.4.1.7483.1.1.2.1.6			The Software Loading MIB.
tnSoftwareNode	1.3.6.1.4.1.7483.2.1.5.2.1.1
tnSoftwareObjs	1.3.6.1.4.1.7483.2.1.5.2
STR tnSwAuditScriptAction	1.3.6.1.4.1.7483.2.1.5.2.1.3.1.7	SnmpAdminString	read-only	The currently executing operation.
TRO tnSwAuditScriptActionPercentCompleted	1.3.6.1.4.1.7483.2.1.5.2.1.3.1.10	TropicSwLastOperationPercentCompleted	read-only	The percent completion of the action. Only applies when tnSwAuditScriptActionStatus is inProgress. It should be 0 at all other times.
TRO tnSwAuditScriptActionResult	1.3.6.1.4.1.7483.2.1.5.2.1.3.1.9	TropicSwLastOperationResult	read-only	The result of the action.
STR tnSwAuditScriptActionStatus	1.3.6.1.4.1.7483.2.1.5.2.1.3.1.8	SnmpAdminString	read-only	The status of the action.
OID tnSwAuditScriptCardType	1.3.6.1.4.1.7483.2.1.5.2.1.3.1.5	OBJECT IDENTIFIER	read-only	The card type of the card being upgraded.
tnSwAuditScriptEntry	1.3.6.1.4.1.7483.2.1.5.2.1.3.1		not-accessible	This table is indexed via the software upgrade stage and the step within the stage.
tnSwAuditScriptGroup	1.3.6.1.4.1.7483.2.1.5.1.1.3
U32 tnSwAuditScriptResultTimeStamp	1.3.6.1.4.1.7483.2.1.5.2.1.3.1.11	Unsigned32	read-only	The time at which the result occurred, measured in total time ticks (seconds) from the year 1970.
TRO tnSwAuditScriptShelf	1.3.6.1.4.1.7483.2.1.5.2.1.3.1.3	TropicShelfIndexType	read-only	The shelf id of the shelf being upgraded.
TRO tnSwAuditScriptSlot	1.3.6.1.4.1.7483.2.1.5.2.1.3.1.4	TropicSlotIndexType	read-only	The slot of the card being upgraded.
U32 tnSwAuditScriptStage	1.3.6.1.4.1.7483.2.1.5.2.1.3.1.1	Unsigned32	not-accessible	The software upgrade stage. The lower bound is 0.
U32 tnSwAuditScriptStep	1.3.6.1.4.1.7483.2.1.5.2.1.3.1.2	Unsigned32	not-accessible	The step within the software upgrade stage. The lower bound is 1.
tnSwAuditScriptTable	1.3.6.1.4.1.7483.2.1.5.2.1.3		not-accessible	This table is comprised of the content of a software upgrade script, created by the execution of a software audit. A network operator may view the script prior to running it. While the script is running, the network operator may use this table to view the progress of the software upgrade.
TRO tnSwCardActiveBank	1.3.6.1.4.1.7483.2.1.5.2.1.2.1.5	TropicSwBank	read-only	The currently active bank.
STR tnSwCardAppBank0	1.3.6.1.4.1.7483.2.1.5.2.1.2.1.1	SnmpAdminString	read-only	The SW generic load currently in bank 0.
STR tnSwCardAppBank1	1.3.6.1.4.1.7483.2.1.5.2.1.2.1.2	SnmpAdminString	read-only	The SW generic load currently in bank 1.
TRO tnSwCardBankToActivate	1.3.6.1.4.1.7483.2.1.5.2.1.2.1.7	TropicSwBank	read-create	This attribute indicates the bank to switch to and reset. A set PDU containing this attribute must also contain attribute tnSwCardControl. When read, this attribute returns a value of none.
INT tnSwCardBankToLoad	1.3.6.1.4.1.7483.2.1.5.2.1.2.1.8	INTEGER	read-create	The flash bank to which the load will be transferred. Selecting a value of application will result in the load being transferred to the inactive application bank. Selecting a value of boot will result in the load being transferred to the user boot bank. All reads on this attribute will return a value of none.
TRO tnSwCardControl	1.3.6.1.4.1.7483.2.1.5.2.1.2.1.9	TropicSwControl	read-create	Command cardLoad results in forced SW loading at the card level. Command cardActivate results in a bank switch and card reset. Sets on all other values are restricted. A read on this attribute returns a value of noCmd.
STR tnSwCardEmergBootBank	1.3.6.1.4.1.7483.2.1.5.2.1.2.1.3	SnmpAdminString	read-only	The SW generic load currently in the emergency boot bank.
tnSwCardEntry	1.3.6.1.4.1.7483.2.1.5.2.1.2.1		not-accessible
tnSwCardGroup	1.3.6.1.4.1.7483.2.1.5.1.1.2
TRO tnSwCardNextBootBank	1.3.6.1.4.1.7483.2.1.5.2.1.2.1.6	TropicSwBank	read-only	The bank from which to boot the card on the next card reset.
STR tnSwCardReleaseDir	1.3.6.1.4.1.7483.2.1.5.2.1.2.1.17	SnmpAdminString	read-create	The directory that contains all the release files. For sets, if the directory starts with a forward slash, it is absolute; otherwise, it is relative to the release root that contains the release files. All reads on this attribute will return an empty string. Its value is not persistent on the 1696R/1830 NE.
tnSwCardTable	1.3.6.1.4.1.7483.2.1.5.2.1.2		not-accessible	Software Downloading on a per card basis. The following sets of attributes are legal in a single SNMP set pdu. Any other combinations will be rejected. tnSwCardControl (value load) tnSwCardBankToLoad tnSwCardReleaseDir or tnSwCardControl (value activate) tnSwCardBankToActivate or tnSwCardControlAbort
STR tnSwCardUserBootBank	1.3.6.1.4.1.7483.2.1.5.2.1.2.1.4	SnmpAdminString	read-only	The SW generic load currently in the user boot bank.
tnSwCpldEntry	1.3.6.1.4.1.7483.2.1.5.2.1.4.1		not-accessible
tnSwCpldGroup	1.3.6.1.4.1.7483.2.1.5.1.1.4
INT tnSwCpldProgramControl	1.3.6.1.4.1.7483.2.1.5.2.1.4.1.1	INTEGER	read-create	Values: noCmd - the returned value on get requests. gentle - indicates to program the CPLDs only if CPLD versions differ. force - program the CPLDs regardless of the version numbers.
tnSwCpldTable	1.3.6.1.4.1.7483.2.1.5.2.1.4		not-accessible	CPLD Software Programming on a per card basis.
STR tnSwNodeActiveRelease	1.3.6.1.4.1.7483.2.1.5.2.1.1.19	SnmpAdminString	read-only	The currently active software release.
STR tnSwNodeCommittedRelease	1.3.6.1.4.1.7483.2.1.5.2.1.1.5	SnmpAdminString	read-only	The committed software release.
TRO tnSwNodeControl	1.3.6.1.4.1.7483.2.1.5.2.1.1.3	TropicSwControl	read-write	Controls the software download. Command details are as follows: **************************************************** load - will simply execute the script generated by audit, running only the load steps. It must be preceded by an audit. Load will not run an audit or delete the the audit script. Cards are not loaded in parallel. - a set pdu including this attribute with this value may also include attribute tnSwNodeLastAuditTimeStamp. If tnSwNodeLastAuditTimeStamp is included, and it differs from the value stored on the node, the load will fail. upgradeAuto - upgradeAuto will perform an audit, load, and activate. It will not commit the release. It will fail if no upgrade path exists unless tnSwNodeUpgradeForce is specified. - a set pdu including this attribute with this value must also include attribute tnSwNodeWorkingReleaseDir; otherwise, the set will be failed back to the network operator. - a set pdu including this attribute with this value may also include attributes tnSwNodeUpgradeForce and/or tnSwNodeUpgradeNoBackup. audit - generates the audit script but does not run it. - sets the value of attribute tnSwNodeUpgradePathAvailable. - a set pdu including this attribute with this value must also include attribute tnSwNodeWorkingReleaseDir; otherwise, the set will be failed back to the network operator. - a set pdu including this attribute with this value may also include attributes tnSwNodeUpgradeForce and/or tnSwNodeUpgradeNoBackup. activate - only runs the previously generated audit script but does not perform any load steps that may be in the audit script. The load command must precede activate. - a set pdu including this attribute with this value may also include attribute tnSwNodeLastAuditTimeStamp. If tnSwNodeLastAuditTimeStamp is included, and it differs from the value stored on the node, the activate will fail. commit - sets tnSwNodeCommittedRelease equal to tnSwNodeWorkingRelease, then clears tnSwNodeWorkingRelease. - clears tnSwNodeWorkingReleaseDir. backout - only allowed if an upgrade has been attempted on the node. Sets on all other values are restricted. A read on this attribute returns a value of noCmd. ****************************************************
TNC tnSwNodeControlAbort	1.3.6.1.4.1.7483.2.1.5.2.1.1.11	TnCommand	read-write	This attribute allows the network operator to submit an abort on any operation executed via attribute tnSwNodeControl. It is only allowed if tnSwNodeLastControlOperationStatus is inProgress. When read back, the value of this attribute is noCmd. An abort will always succeed.
INT tnSwNodeForce	1.3.6.1.4.1.7483.2.1.5.2.1.1.7	INTEGER	read-write	This attribute, when set to true, MAY result in the DB being purged (only if there is no upgrade path available). When this attribute is set to false, the DB will NOT be purged. All reads on this attribute will return a value of none. It's value is not persistent on the 1696R/1830 NE. A set pdu including this attribute must also include attribute tnSwNodeControl; otherwise, the set will be failed back to the network operator.
tnSwNodeGroup	1.3.6.1.4.1.7483.2.1.5.1.1.1			A collection of objects providing System Downloads
U32 tnSwNodeLastAuditTimeStamp	1.3.6.1.4.1.7483.2.1.5.2.1.1.16	Unsigned32	read-write	The time at which the last audit was executed, measured in total time ticks (seconds) from the year 1970. When setting tnSwNodeControl to install, tnSwNodeLastAuditTimeStamp may be included in the set pdu. Attempting to set tnSwNodeLastAuditTimeStamp independent of attribute tnSwNodeControl will be failed back to the network operator. The value read back is controlled entirely by the 1696R/1830 NE, which keeps this value in the database. The value in the database will not be overwritten by setting this attribute via SNMP. Setting this to a value of 0 or not including this attribute with tnSwNodeControl in a set pdu disables this feature.
TRO tnSwNodeLastControlOperation	1.3.6.1.4.1.7483.2.1.5.2.1.1.10	TropicSwControl	read-only	This is the last control command executed against the software download subsystem. If the last operation against the software download subsystem is not one of the valid operations in TropicSwControl, the value of this attribute will be unknown.
I32 tnSwNodeLastControlOperationIntegerResult	1.3.6.1.4.1.7483.2.1.5.2.1.1.14	Integer32	read-only	The result of the previously executed tnSwNodeControl operation, as an integer.
TRO tnSwNodeLastControlOperationPercentCompleted	1.3.6.1.4.1.7483.2.1.5.2.1.1.15	TropicSwLastOperationPercentCompleted	read-only	The percent completion of the previously executed tnSwNodeControl operation. Only applies when tnSwNodeLastControlOperationStatus is inProgress. It should be 0 at all other times.
TRO tnSwNodeLastControlOperationResult	1.3.6.1.4.1.7483.2.1.5.2.1.1.13	TropicSwLastOperationResult	read-only	The result of the previously executed tnSwNodeControl operation, whether or not it passed or failed.
TRO tnSwNodeLastControlOperationStatus	1.3.6.1.4.1.7483.2.1.5.2.1.1.12	TropicSwLastOperationStatus	read-only	This attribute indicates the status of the previously executed tnSwNodeControl operation.
INT tnSwNodeNoBackup	1.3.6.1.4.1.7483.2.1.5.2.1.1.8	INTEGER	read-write	This attribute, when set to true, a DB backup will not be required or enforced. When this attribute is set to false, a DB will backup will be required and enforced. All reads on this attribute will return a value of none. Its value is not persistent on the 1696R/1830 NE. A set pdu including this attribute must also include attribute tnSwNodeControl; otherwise, the set will be failed back to the network operator.
TRO tnSwNodePartialLoadActionPercentCompleted	1.3.6.1.4.1.7483.2.1.5.2.1.1.30	TropicSwLastOperationPercentCompleted	read-only	The partial load percent completion of the action. It should be 0 at all other times.
TRO tnSwNodePartialLoadActionResult	1.3.6.1.4.1.7483.2.1.5.2.1.1.29	TropicSwLastOperationResult	read-only	The partial load result of the action.
INT tnSwNodePartialLoadCommand	1.3.6.1.4.1.7483.2.1.5.2.1.1.25	INTEGER	read-write
STR tnSwNodePartialLoadImgInstalledCardTypes	1.3.6.1.4.1.7483.2.1.5.2.1.1.27	SnmpAdminString	read-only	The lc card types which image have been installed on the node. Format like 11PDM12&112PDM11.
STR tnSwNodePartialLoadImgToBeInstalledCardTypes	1.3.6.1.4.1.7483.2.1.5.2.1.1.28	SnmpAdminString	read-write	The lc card types which image will need to install on the node. Format like 11PDM12&112PDM11. Only applies when tnSwNodePartialLoadCommand is partialLoad.
STR tnSwNodePartialLoadSupportedCardTypes	1.3.6.1.4.1.7483.2.1.5.2.1.1.26	SnmpAdminString	read-only	The lc card types which image support by the node software release. Format like 11PDM12&112PDM11.
STR tnSwNodeReleaseRoot	1.3.6.1.4.1.7483.2.1.5.2.1.1.2	SnmpAdminString	read-write	The path to the directory containing releases, relative to the TFTP server root directory. A forward slash will be prepended if it does not start with one.
IP tnSwNodeSwdlServerIp	1.3.6.1.4.1.7483.2.1.5.2.1.1.21	IpAddress	read-write	The software download server where software files to be downloaded reside. This will be used as the primary source for files.
STR tnSwNodeSwdlServerPassword	1.3.6.1.4.1.7483.2.1.5.2.1.1.23	SnmpAdminString	read-write	The password used to access software download server.
ALU tnSwNodeSwdlServerProtocol	1.3.6.1.4.1.7483.2.1.5.2.1.1.20	AluWdmTransferProtocol	read-write	This attributes indicates the software download protocol.
STR tnSwNodeSwdlServerUserId	1.3.6.1.4.1.7483.2.1.5.2.1.1.22	SnmpAdminString	read-write	The userId used to access software download server.
T/F tnSwNodeUpgradePathAvailable	1.3.6.1.4.1.7483.2.1.5.2.1.1.9	TruthValue	read-only	This object is set by the 1696R/1830 NE after the completion of an audit, either by setting tnSwNodeControl to audit or indirectly by setting tnSwNodeControl to upgradeAuto.
STR tnSwNodeWorkingRelease	1.3.6.1.4.1.7483.2.1.5.2.1.1.6	SnmpAdminString	read-only	The software release to which the system is upgrading. This is cleared following a commit to the release.
STR tnSwNodeWorkingReleaseDir	1.3.6.1.4.1.7483.2.1.5.2.1.1.18	SnmpAdminString	read-write	The directory associated with the software release to which the system is upgrading. For sets, if the directory starts with a forward slash, it is absolute; otherwise, it is relative to the release root that contains the release files. For gets, the response will be the absolute directory, including the release root and including a leading forward slash. This is cleared following a commit to the release. A set pdu including this attribute must also include attribute tnSwNodeControl; otherwise, the set will be failed back to the network operator.

RFC description

Software loading and firmware management MIB for Nokia TROPIC network elements.

Start monitoring Nokia (Alcatel-Lucent) Tropic DWDM optical transport network element (software version/upgrade-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TROPIC-SOFTWARE-MIB

What Is TROPIC-SOFTWARE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description