TROPIC-L1SERVICE-MIB

All MIBs › TROPIC-L1SERVICE-MIB

Organization: Nokia

Last Updated: 2016-05-24

Category: Nokia Optical Transport

Description: Manages Nokia Tropic Layer 1 service provisioning and end-to-end connectivity for optical transport.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TROPIC-L1SERVICE-MIB?

TROPIC-L1SERVICE-MIB is a Nokia (formerly Tropic Networks) proprietary MIB used to manage Layer 1 optical transport service provisioning, including control network configuration and Automatic Protection Switching (APS) for end-to-end circuit connectivity. It exposes configuration-oriented data covering optical service paths, protection group assignments, and cross-connect state within the transport network control plane. In a monitoring context it is primarily used to track the operational and protection-switching status of provisioned optical circuits, revealing faults such as failed APS switchovers, broken end-to-end paths, or misconfigured service segments rather than classic host health metrics like CPU or memory. It is a vendor-specific extension used alongside Nokia's broader Tropic optical transport MIB suite rather than standard IETF interface or entity MIBs. It is typically deployed on optical transport network elements in metro and long-haul DWDM/SONET networks managed by carrier-grade element or network management systems. Engineers can download the TROPIC-L1SERVICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-L1SERVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia Tropic optical transport network element
DWDM/SONET optical switch

Monitoring Examples

No sample objects were provided for this module, so specific table or scalar names cannot be cited, but the module's stated purpose covers a 'Control Network and APS MIB' for provisioning Layer 1 services. An operator would typically poll APS protection group state and control-network path status to confirm that a working circuit and its protect path remain synchronized, and to detect an unexpected or failed protection switchover. Because no runtime objects were provided, this description is limited to the module's documented scope rather than concrete object names.

What Can Be Monitored

APS protection switch state
control network path status
end-to-end service connectivity

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From IP-FORWARD-MIB

ipCidrRouteEntry

OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

From TROPIC-GLOBAL-REG

tnL1ServiceMIB	OBJECT-IDENTITY
tnServiceModules	OBJECT-IDENTITY

From TROPIC-SHELF-MIB

tnShelfIndex

OBJECT-TYPE

From TROPIC-SLOT-MIB

tnSlotIndex

OBJECT-TYPE

From TROPIC-TC

AluWdmEnabledDisabled
AluWdmTypeOfNetIfOperation
TnApsGroupId
TnPerHopBehaviourType
TropicChannelIndexType
TropicPortIndexType

How to Use in IPNetwork Monitor

Example using tnApsGroupModeMismatches OID:

Select a Nokia Tropic optical transport network element, DWDM/SONET optical switch (APS protection-switching/cross-connect status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tnApsGroupModeMismatches into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of APS mode mismatch events detected for this group. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
tnL1ServiceMibModule	1.3.6.1.4.1.7483.1.1.2.3.1			Control Network and APS MIB.
tnL1ServiceConf	1.3.6.1.4.1.7483.2.3.1.1
tnL1ServiceGroups	1.3.6.1.4.1.7483.2.3.1.1.1
tnControlNetworkLinkGroup	1.3.6.1.4.1.7483.2.3.1.1.1.1
tnCNLinkViaChannelGroup	1.3.6.1.4.1.7483.2.3.1.1.1.2
tnIpStaticRouteGroup	1.3.6.1.4.1.7483.2.3.1.1.1.3
tnIpCidrRouteGroup	1.3.6.1.4.1.7483.2.3.1.1.1.4
tnL1TrafficParmGroup	1.3.6.1.4.1.7483.2.3.1.1.1.5
tnIpRouteGlobalGroup	1.3.6.1.4.1.7483.2.3.1.1.1.6
tnApsGroup	1.3.6.1.4.1.7483.2.3.1.1.1.10
tnApsMemberGroup	1.3.6.1.4.1.7483.2.3.1.1.1.11
tnControlNetworkMapGroup	1.3.6.1.4.1.7483.2.3.1.1.1.13
tnNetIfGroup	1.3.6.1.4.1.7483.2.3.1.1.1.14
tnNetIfFacilityGroup	1.3.6.1.4.1.7483.2.3.1.1.1.15
tnPackApsGroup	1.3.6.1.4.1.7483.2.3.1.1.1.16
tnL1ServiceCompliances	1.3.6.1.4.1.7483.2.3.1.1.2
tnL1ServiceCompliance	1.3.6.1.4.1.7483.2.3.1.1.2.1
tnL1ServiceObjs	1.3.6.1.4.1.7483.2.3.1.2
tnControlNetworkLink	1.3.6.1.4.1.7483.2.3.1.2.1
tnControlNetworkLinkTable	1.3.6.1.4.1.7483.2.3.1.2.1.1		not-accessible	The control network link table.
tnControlNetworkLinkEntry	1.3.6.1.4.1.7483.2.3.1.2.1.1.1		not-accessible	The Control Network connection entry. For the 1696R, the index is a logical derived value created by the system. For the 1830 PSS-32, the index is the physical shelf/slot/port with an exception for attribute tnCNLinkPhysicalIfIndex where the index is an integer (1..20).
STR tnCNLinkDescr	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.1	SnmpAdminString	read-create
TRO tnCNLinkAdminStatus	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.2	TropicLinkAdminStateType	read-create	The Admin status of the link.
TRO tnCNLinkOperStatus	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.3	TropicLinkOperationalStateType	read-only	The Operational status of the link.
NUM tnCNLinkPhysicalIfIndex	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.5	InterfaceIndex	read-create	The physical interface index of the link. SET on this attribute is currently not supported.
IP tnCNLinkIpAddress	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.7	IpAddress	read-create
IP tnCNLinkSubnetMask	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.8	IpAddress	read-create
U32 tnCNLinkHelloInterval	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.14	Unsigned32	read-create	The hello interval of the link. Current configurable range: 1 to 65535.
U32 tnCNLinkRtrDeadInterval	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.15	Unsigned32	read-create	The router dead interval of the link. For 1830, the range is (1..'FFFF'h).
U32 tnCNLinkTeMetric	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.22	Unsigned32	read-create	The Traffic eng metric of the link. For OSC, default is 10; for GCC OTU1, default is 40; for GCC OTU2 default is 30; for GCC OTU3 default is 20. Current configurable range: 1 to 65535.
INT tnCNLinkOspfRoutingState	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.31	INTEGER	read-create
INT tnCNLinkConfigIfType	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.32	INTEGER	read-create	The OSPF interface type of the link.
U32 tnCNLinkConfigRtrPriority	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.33	Unsigned32	read-create	The router priority of the link.
TRO tnCNLinkEquipOperStatus	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.34	TropicLinkOperationalStateType	read-only	The Operational status of the associated physical link.
T/F tnCNLinkDhcpEnabled	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.35	TruthValue	read-create	Indicates if DHCP is enabled on the link. Sets are restricted to the local ethernet port CN link.
INT tnCNLinkSpeed	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.36	INTEGER	read-create
INT tnCNLinkDuplex	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.37	INTEGER	read-create
T/F tnCNLinkProxyArp	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.38	TruthValue	read-create	Proxy Arp configured.
T/F tnCNLinkDHCPServer	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.39	TruthValue	read-create	DHCP server configured.
U32 tnCNLinkDHCPRange	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.40	Unsigned32	read-create	DHCP range. Current configurable range: 0 to 10
TRO tnCNLinkAdjState	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.41	TropicOspfAdjacencyStateType	read-only	OSPF Adj state.
INT tnCNLinkOscMode	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.42	INTEGER	read-create	OSC mode.
T/F tnCNLinkDHCPDfltGtwy	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.43	TruthValue	read-create	Indicates if default gateway IP address is distributed via DHCP on this interface.
T/F tnCNLinkCitAutoStateCtrl	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.44	TruthValue	read-create	false - System is not in auto_state. CIT enable/disable is done by ifAdminStatus. true - System is in auto_state. CIT enable/disable is done by the connectivity status of source_ip. The CIT port will be disabled when the source IP is reachable and enabled when source IP becomes un-reachable. Provisioning of this attribute is restricted to administrators only.
IP tnCNLinkAutoStateSourceIP	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.45	IpAddress	read-create	A source IP address that the system shall monitor when tnCNLinkCitAutoStateCtrl is true. This can be the 1350 OMS server address or another IP.
U32 tnCNLinkSourceLossCount	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.46	Unsigned32	read-create	The number of consecutive retries that tnCNLinkAutoStateSourceIP is un-reachable when tnCNLinkCitAutoStateCtrl is true, which results in CIT port to be auto-enabled. Current configurable range: 5 to 10000.
U32 tnCNLinkSourceIPCheckInterval	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.47	Unsigned32	read-create	The interval to contact tnCNLinkAutoStateSourceIP when tnCNLinkCitAutoStateCtrl is true. Current configurable range: 10 to 7200.
INT tnCNLinkOspfAuthentType	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.48	INTEGER	read-create
STR tnCNLinkOspfAuthKey	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.49	SnmpAdminString	read-create
U32 tnCNLinkOspfAuthKeyId	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.50	Unsigned32	read-create
INT tnCNLinkTdmxDcnConf	1.3.6.1.4.1.7483.2.3.1.2.1.1.1.51	INTEGER	read-create
tnCNLinkViaChannelTable	1.3.6.1.4.1.7483.2.3.1.2.1.2		not-accessible	This is a read-only table. It provides a secondary way of reading CN Link information.
tnCNLinkViaChannelEntry	1.3.6.1.4.1.7483.2.3.1.2.1.2.1		not-accessible	The index has a shelf/slot/port/channel granularity.
TRO tnPortIndex	1.3.6.1.4.1.7483.2.3.1.2.1.2.1.1	TropicPortIndexType	not-accessible	The port portion of the index of the link.
TRO tnChannelIndex	1.3.6.1.4.1.7483.2.3.1.2.1.2.1.2	TropicChannelIndexType	not-accessible	The channel portion of the index of the link.
NUM tnCNLinkViaChannelIfIndex	1.3.6.1.4.1.7483.2.3.1.2.1.2.1.3	InterfaceIndex	read-only	The interface index of the link, a derived value created by the system.
tnDataNetworkLink	1.3.6.1.4.1.7483.2.3.1.2.2
tnL1TrafficParamTable	1.3.6.1.4.1.7483.2.3.1.2.2.3		not-accessible
tnL1TrafficParamEntry	1.3.6.1.4.1.7483.2.3.1.2.2.3.1		not-accessible
TNP tnL1TrafficParamPerHopBehaviour	1.3.6.1.4.1.7483.2.3.1.2.2.3.1.1	TnPerHopBehaviourType	not-accessible	The value of this object identifies the Class of Service.
U32 tnL1TrafficParamBookingFactor	1.3.6.1.4.1.7483.2.3.1.2.2.3.1.2	Unsigned32	read-create
U32 tnL1TrafficParamMaximumLoad	1.3.6.1.4.1.7483.2.3.1.2.2.3.1.3	Unsigned32	read-create
U32 tnL1TrafficParamPMF	1.3.6.1.4.1.7483.2.3.1.2.2.3.1.4	Unsigned32	read-create
U32 tnL1TrafficParamAvailableBandwidth	1.3.6.1.4.1.7483.2.3.1.2.2.3.1.5	Unsigned32	read-only
tnIpRoute	1.3.6.1.4.1.7483.2.3.1.2.4
tnIpStaticRouteTable	1.3.6.1.4.1.7483.2.3.1.2.4.1		not-accessible
tnIpStaticRouteEntry	1.3.6.1.4.1.7483.2.3.1.2.4.1.1		not-accessible
IP tnIpStaticRouteDest	1.3.6.1.4.1.7483.2.3.1.2.4.1.1.1	IpAddress	not-accessible
IP tnIpStaticRouteMask	1.3.6.1.4.1.7483.2.3.1.2.4.1.1.2	IpAddress	not-accessible
I32 tnIpStaticRouteTos	1.3.6.1.4.1.7483.2.3.1.2.4.1.1.3	Integer32	not-accessible
U32 tnIpStaticRouteNextHop	1.3.6.1.4.1.7483.2.3.1.2.4.1.1.4	Unsigned32	not-accessible
I32 tnIpStaticRouteMetric	1.3.6.1.4.1.7483.2.3.1.2.4.1.1.6	Integer32	read-create	Determines which route to be entered in the NE routing table when there are multiple identical routes discovered through different routing protocols. Lower values have higher precedence. Note: If a value of 255 is entered, the route will NOT be installed in the routing table. A value of 255 is used to indicate an Unknown route.
T/F tnIpStaticRouteWithRedistribution	1.3.6.1.4.1.7483.2.3.1.2.4.1.1.7	TruthValue	read-create
ROW tnIpStaticRouteRowStatus	1.3.6.1.4.1.7483.2.3.1.2.4.1.1.8	RowStatus	read-create
tnIpCidrRouteTable	1.3.6.1.4.1.7483.2.3.1.2.4.2		not-accessible
tnIpCidrRouteEntry	1.3.6.1.4.1.7483.2.3.1.2.4.2.1		not-accessible
T/F tnIpCidrRouteWithRedistribution	1.3.6.1.4.1.7483.2.3.1.2.4.2.1.1	TruthValue	read-create
tnIpRouteGlobal	1.3.6.1.4.1.7483.2.3.1.2.4.3
U32 tnIpStaticRouteRedistributeMetricType	1.3.6.1.4.1.7483.2.3.1.2.4.3.1	Unsigned32	read-write	Redistribute metric type for static routes. Current configurable range: 1 to 2.
U32 tnIpStaticRouteRedistributeMetric	1.3.6.1.4.1.7483.2.3.1.2.4.3.2	Unsigned32	read-write	Redistribute metric for static routes. Current configurable range: 0 to 16777214.
U32 tnIpDefaultRouteRedistributeMetricType	1.3.6.1.4.1.7483.2.3.1.2.4.3.3	Unsigned32	read-write	Redistribute metric type for the default route. Current configurable range: 1 to 2.
U32 tnIpDefaultRouteRedistributeMetric	1.3.6.1.4.1.7483.2.3.1.2.4.3.4	Unsigned32	read-write	Redistribute metric for the default route. Current configurable range: 0 to 16777214.
I32 tnIpOspfAreaNumberPPPId	1.3.6.1.4.1.7483.2.3.1.2.4.3.5	Integer32	read-write	For all OSC/GCC interfaces, it will use the same OSPF area which can be provisioned to something other than the default 0.0.0.0. Current configurable range: 0 to 3.
tnSharedRiskGroupObjs	1.3.6.1.4.1.7483.2.3.1.2.5
tnL1NetworkLink	1.3.6.1.4.1.7483.2.3.1.2.5.1
tnL1Hop	1.3.6.1.4.1.7483.2.3.1.2.5.2
tnL1Fiber	1.3.6.1.4.1.7483.2.3.1.2.5.3
tnL1Conduit	1.3.6.1.4.1.7483.2.3.1.2.5.4
tnL1Protection	1.3.6.1.4.1.7483.2.3.1.2.6
tnApsGroupTable	1.3.6.1.4.1.7483.2.3.1.2.6.1		not-accessible	The automatic protection switch group table.
tnApsGroupEntry	1.3.6.1.4.1.7483.2.3.1.2.6.1.1		not-accessible
TNA tnApsGroupId	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.1	TnApsGroupId	not-accessible
ROW tnApsGroupRowStatus	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.2	RowStatus	read-create
STR tnApsGroupDescr	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.3	SnmpAdminString	read-create
TRO tnApsGroupMode	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.4	TropicProtectionLevel	read-create
INT tnApsGroupRevert	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.5	INTEGER	read-create
INT tnApsGroupDirection	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.6	INTEGER	read-create
ALU tnApsGroupExtraTraffic	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.7	AluWdmEnabledDisabled	read-create
U32 tnApsGroupWaitToRestore	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.8	Unsigned32	read-create	Current configurable range: 1 to 20.
APS tnApsGroupK1K2Rcv	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.9	ApsK1K2	read-only
APS tnApsGroupK1K2Trans	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.10	ApsK1K2	read-only
BIT tnApsGroupCurrentStatus	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.11	Bits	read-only
C32 tnApsGroupModeMismatchesEx	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.12	Counter32	read-only
C32 tnApsGroupChannelMismatches	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.13	Counter32	read-only
C32 tnApsGroupPSBFs	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.14	Counter32	read-only
C32 tnApsGroupFEPLFs	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.15	Counter32	read-only
NUM tnApsGroupSwitchedIfIndex	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.16	InterfaceIndex	read-only
STR tnApsGroupMembers	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.17	SnmpAdminString	read-create	This attribute must be set with the following format: For the 1696R and 1830 PSS-32 single line ported cards: : For the 1830 PSS-1 GBE and MD4H, and 1830 PSS-32 4DAP4A (i.e., all dual-line ported cards): :: The ifIndices must be in decimal ASCII and delimited by a colon. If this format is not followed, the set will fail. This attribute can only be set in conjunction with setting tnApsGroupRowStatus. For a row status of createAndGo: If the ifIndices do not represent protection supported ports, provisioned in the supported slots, the set will be failed. Setting this attribute will result in creating 2 interface entries in table tnApsMemberTable. For a row status of destroy: If both ifIndices are not set to zero, the set will be failed. Setting this attribute will result in deleting 2 interface entries in table tnApsMemberTable. No other row status values are supported with this attribute.
T/F tnApsGroupSdEnable	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.18	TruthValue	read-create	Indicates whether or not Signal Degrade is used for protection switching.
U32 tnApsHoldOffTimer	1.3.6.1.4.1.7483.2.3.1.2.6.1.1.19	Unsigned32	read-create	Hold Off Time for automatic switching. Current configurable range: 0 to 10000.
tnApsMemberTable	1.3.6.1.4.1.7483.2.3.1.2.6.2		not-accessible	The automatic protection switch group member table.
tnApsMemberEntry	1.3.6.1.4.1.7483.2.3.1.2.6.2.1		not-accessible
NUM tnApsMemberIfIndex	1.3.6.1.4.1.7483.2.3.1.2.6.2.1.1	InterfaceIndex	not-accessible
ROW tnApsMemberRowStatus	1.3.6.1.4.1.7483.2.3.1.2.6.2.1.2	RowStatus	read-create	Changing the row status is currently not supported.
I32 tnApsMemberConfigNumber	1.3.6.1.4.1.7483.2.3.1.2.6.2.1.3	Integer32	read-create	Currently, only the first two values are used: 0 - Protection 1 - Working The rest of values (2..14) are not used.
INT tnApsMemberSwitch	1.3.6.1.4.1.7483.2.3.1.2.6.2.1.5	INTEGER	read-create	The type of protection switch.
BIT tnApsMemberCurrentStatus	1.3.6.1.4.1.7483.2.3.1.2.6.2.1.7	Bits	read-only	Current protection status.
tnPackApsGroupTable	1.3.6.1.4.1.7483.2.3.1.2.6.3		not-accessible
tnPackApsGroupEntry	1.3.6.1.4.1.7483.2.3.1.2.6.3.1		not-accessible
U32 tnPackApsGroupID	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.1	Unsigned32	not-accessible
ROW tnPackApsGroupRowStatus	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.2	RowStatus	read-create
I32 tnPackApsGroupWorkIfIndex	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.3	Integer32	read-create	The interface Index in the working pack.
I32 tnPackApsGroupProtIfIndex	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.4	Integer32	read-create	The interface Index in the protection pack.
STR tnPackApsGroupDescr	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.5	SnmpAdminString	read-create	Description for the APS group.
INT tnPackApsGroupRevert	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.6	INTEGER	read-create	The revertive attribute of the APS group.
INT tnPackApsGroupDirection	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.7	INTEGER	read-create	The protection direction of the APS Group.Only Unidirection
U32 tnPackApsGroupWaitToRestore	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.8	Unsigned32	read-create	The wait-to-restore time for the revertive mode automatic switching. The values are in minutes. Current configurable range: 1 to 15.
U32 tnPackApsGroupHoldOffTimer	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.9	Unsigned32	read-create	Hold Off Time for automatic switching. Current configurable range: 0 to 10000.
INT tnPackApsGroupSwitchCmd	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.10	INTEGER	read-create	The switch command applied to the APS group.
INT tnPackApsGroupActSide	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.11	INTEGER	read-only	Active side in the Pack APS group.
INT tnPackApsGroupCurrentStatus	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.12	INTEGER	read-only	Currently Group Status for a Pack APS.
INT tnPackApsGroupWorkStatus	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.13	INTEGER	read-only	The status of the working pack in the APS group.
INT tnPackApsGroupProtStatus	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.14	INTEGER	read-only	The status of the protection pack in the APS group.
T/F tnPackApsGroupPortFailEnable	1.3.6.1.4.1.7483.2.3.1.2.6.3.1.15	TruthValue	read-create	Indicates whether or not Port fail is used for protection switching.
tnIpTunnel	1.3.6.1.4.1.7483.2.3.1.2.7
tnControlNetworkMap	1.3.6.1.4.1.7483.2.3.1.2.8
tnControlNetworkMapTable	1.3.6.1.4.1.7483.2.3.1.2.8.1		not-accessible	The control network map table.
tnControlNetworkMapEntry	1.3.6.1.4.1.7483.2.3.1.2.8.1.1		not-accessible	The Control Network map entry. This is the information on the neighbors of this NE.
U32 tnCNMapTableIndex	1.3.6.1.4.1.7483.2.3.1.2.8.1.1.1	Unsigned32	not-accessible	The index into the map table.
IP tnCNMapIpAddress	1.3.6.1.4.1.7483.2.3.1.2.8.1.1.2	IpAddress	read-only	The IP address of the node.
OCT tnCNMapNeName	1.3.6.1.4.1.7483.2.3.1.2.8.1.1.3	OCTET STRING	read-only	The name of the node.
OCT tnCNMapSoftwareRelease	1.3.6.1.4.1.7483.2.3.1.2.8.1.1.4	OCTET STRING	read-only	The software release of the node.
tnNetworkInterface	1.3.6.1.4.1.7483.2.3.1.2.9
tnNetIfTable	1.3.6.1.4.1.7483.2.3.1.2.9.1		not-accessible	The network interface table.
tnNetIfEntry	1.3.6.1.4.1.7483.2.3.1.2.9.1.1		not-accessible	.
U32 tnNetIfIndex	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.1	Unsigned32	not-accessible	Access identifier for the Network Interface Index.
ALU tnNetIfTypeOfOperation	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.2	AluWdmTypeOfNetIfOperation	read-create	Create, delete, or modify a network interface instance over an ECC.
INT tnNetIfStatus	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.3	INTEGER	read-create	Administrative status of the network interface.
INT tnNetIfPacketType	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.4	INTEGER	read-create	GCC packet type, which indicates if the NETIF packet type is standard (std) or non-standard (nonstd). Only provisionable for 4DPA4, 11DPE12, 11STAR1, and 11STMM10 pack related NETIFs. If tnNetIfPacketType is std, tnNetIfMtu can be changed. If tnNetIfPacketType is nonStd, tnNetIfMtu is always the default value and cannot be changed. Changing tnNetIfPacketType from std to nonStd results in tnNetIfMtu of the NETIF being changed to the default value. Default: nonstd for 4DPA4, 11DPE12, 11STAR1, and 11STMM10. std for all others.
I32 tnNetIfMtu	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.5	Integer32	read-create	Maximum Transmission Unit size, in units of bytes. This attribute can only be changed if tnNetIfPacketType is std. Current configurable range: 576 to 1500. Default: 1473 for 4DPA4, 11DPE12, 11STAR1, and 11STMM10. 1500 for all others.
U32 tnNetIfHelloInterval	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.6	Unsigned32	read-create	Specifies the hello interval for the interface. The Hello interval specifies how often (in seconds) a hello packet is sent out on the interface. Hello packets are used to establish and maintain relationships with neighboring network elements. Current configurable range: 1 to 65535.
U32 tnNetIfRtrDeadInterval	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.7	Unsigned32	read-create	OSPF Router Dead Interval of the interface. This is the time elapsed between not hearing a router's Hello PDU before the interface OSPF state is declared down. The dead interval is a timer used to timeout inactive adjacencies. The dead interval value should always be greater than the hello interval value. By default, the interface shall be set to four times the value of the HELLOINT, so the default is 40 seconds. Current configurable range: 1 to 65535.
U32 tnNetIfMetric	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.8	Unsigned32	read-create	OSPF Metric or Cost of the interface. The lower the cost, the more preferred the interface is for the routing of packets. Current configurable range: 1 to 65535. Default: 14 for ODU4/OTU4 NETIF 18 for ODU3e2/OTU3e2 NETIF 20 for ODU3/OTU3 NETIF 28 for ODU2e/OTU2e NETIF 30 for ODU2/OTU2 NETIF 40 for ODU1/OTU1 NETIF.
INT tnNetIfOspfAuthentType	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.9	INTEGER	read-create	Specifies OSPF authentication on the interface - only none and MD5 are currently supported.
OCT tnNetIfOspfAuthKey	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.10	OCTET STRING	read-create	Key used for OSPF MD5 128 bit hash value key calculation on the interface. The string shall be 0 to 16 uppercase or lowercase alphanumeric characters.
U32 tnNetIfOspfAuthKeyId	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.11	Unsigned32	read-create	Key used for OSPF MD5 128 bit hash value key calculation on the interface. Current configurable range: 1 to 255.
TRO tnNetIfCnLinkAdjState	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.12	TropicOspfAdjacencyStateType	read-only	NETIF OSPF adjacency state.
I32 tnNetIfMtuNeg	1.3.6.1.4.1.7483.2.3.1.2.9.1.1.13	Integer32	read-only	The actual (negotiated) Maximum Transmission Unit size,in units of bytes with default value -1, when the MTU size has not yet been negotiated. The default value -1 should be interpreted by UIs as '-'.
tnNetIfFacilityTable	1.3.6.1.4.1.7483.2.3.1.2.9.2		not-accessible	The Network interface facility table.
tnNetIfFacilityEntry	1.3.6.1.4.1.7483.2.3.1.2.9.2.1		not-accessible	.
U32 tnNetIfFacilityIfIndex	1.3.6.1.4.1.7483.2.3.1.2.9.2.1.1	Unsigned32	not-accessible	The facility carrying the ECC. The format of the first 32 bits of the 64 index is as follows: 8 8 1 13 2 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ \| shelf \| slot \|0\| port/hoOdu/oduptf \|dir\| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ tnNetIfFacilityIfIndexLo (below) is the next 32 bits of the 64 bit index. Refer to the 1830 PSS R6.0 XCOM RRS for valid values of facility and shelf and slot and port ranges for each supported circuit pack type.
U32 tnNetIfFacilityIfIndexLo	1.3.6.1.4.1.7483.2.3.1.2.9.2.1.2	Unsigned32	not-accessible	The facility carrying the ECC. tnNetIfFacilityIfIndex (above) is the first 32 bits of the 64 bit index. The format of the second 32 bit of the index is as follows: 9 3 2 2 4 6 6 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ \| loOdu/optsg \| tcm \|pos\|res\|facType\| subFac \| 25 \| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Refer to the 1830 PSS R6.0 XCOM RRS for valid values of facility and shelf and slot and port ranges for each supported circuit pack type.
ALU tnNetIfFacilityTypeOfOperation	1.3.6.1.4.1.7483.2.3.1.2.9.2.1.3	AluWdmTypeOfNetIfOperation	read-create	Create, delete, or modify the facility information of a network interface instance.
INT tnNetIfFacilityEccChanType	1.3.6.1.4.1.7483.2.3.1.2.9.2.1.4	INTEGER	read-create	Specifies the ECC type of the referred ECC channel. Default: gcc0 if NETIF addresses an OTU gcc1 if NETIF addresses an ODU. Refer to the 1830 PSS R6.0 XCOM RRS for valid values of eccchnl supported on facility and shelf and slot and port ranges for each supported circuit pack type.

RFC description

Controls network control and Automatic Protection Switching (APS) services for Nokia TROPIC platforms.

Start monitoring Nokia Tropic optical transport network element, DWDM/SONET optical switch (APS protection-switching/cross-connect status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TROPIC-L1SERVICE-MIB

What Is TROPIC-L1SERVICE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description