All MIBs › TROPIC-AMPLIFIER-MIB
Organization: Nokia
Last Updated: 2014-07-31
Category: Nokia Optical Transport
Description: Manages Nokia Tropic optical amplifier configuration, gain settings, and operational status.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TROPIC-AMPLIFIER-MIB?
TROPIC-AMPLIFIER-MIB is part of Nokia's (formerly Alcatel-Lucent) Tropic DWDM optical transport management MIB suite, covering optical amplifier equipment used to boost signal power in a DWDM system. It defines configuration objects for amplifier gain settings along with operational status data for the amplifier. Its monitoring purpose is hardware status: tracking whether an optical amplifier is operating within its target gain range and flagging faults or degraded output that could impact signal quality across all wavelengths riding on that fiber. It is one of several related Tropic MIBs (alongside TROPIC-OCH-MIB, TROPIC-OTH-MIB, and TROPIC-OSPF-MIB) that together model a Nokia DWDM network element, sharing common conventions across the suite. It is deployed on Nokia DWDM optical transport network elements used in service-provider optical backbone networks. Engineers can download the TROPIC-AMPLIFIER-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-AMPLIFIER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia (Alcatel-Lucent) Tropic DWDM optical transport network element
Monitoring Examples
No sample object names were provided for this module. Based on its description as an amplifier types MIB, an admin would be expected to poll gain-setting and operational-status objects to confirm the optical amplifier is holding its configured gain and to detect a fault condition or output-power deviation that could degrade the DWDM channels it is amplifying.
What Can Be Monitored
- amplifier gain setting
- amplifier operational status
- amplifier fault condition
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| ifIndex | OBJECT-TYPE |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| TruthValue |
From TROPIC-GLOBAL-REG
| tnAmplifierMIB | OBJECT-IDENTITY |
| tnCardModules | OBJECT-IDENTITY |
From TROPIC-SHELF-MIB
| tnShelfIndex | OBJECT-TYPE |
From TROPIC-SLOT-MIB
| tnSlotIndex | OBJECT-TYPE |
From TROPIC-TC
| TnCommand |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| tnAmplifierMibModule | 1.3.6.1.4.1.7483.1.1.2.2.3.4 | Amplifier MIB types. | ||
| tnAmplifierConf | 1.3.6.1.4.1.7483.2.2.3.7.1 | |||
| tnAmplifierGroups | 1.3.6.1.4.1.7483.2.2.3.7.1.1 | |||
| tnAmplifierPortConfigGroups | 1.3.6.1.4.1.7483.2.2.3.7.1.1.1 | |||
| tnAmplifierPortConfigScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.1 | |||
| tnAmplifierPortConfigGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.2 | |||
| tnAmplifierHybridPortConfigScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.3 | |||
| tnAmplifierHybridPortConfigGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.4 | |||
| tnAmplifierPortInfoGroups | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2 | |||
| tnAmplifierPortInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.1 | |||
| tnAmplifierPortInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.2 | |||
| tnAmplifierMeshPortInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.3 | |||
| tnAmplifierMeshPortInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.4 | |||
| tnAmplifierHybridPortInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.5 | |||
| tnAmplifierHybridPortInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.6 | |||
| tnAmplifierCardInfoGroups | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3 | |||
| tnAmplifierCardInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.1 | |||
| tnAmplifierCardInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.2 | |||
| tnAmplifierMeshCardInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.3 | |||
| tnAmplifierMeshCardInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.4 | |||
| tnAmplifierHybridCardInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.5 | |||
| tnAmplifierHybridCardInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.6 | |||
| tnAmplifierCardConfigGroups | 1.3.6.1.4.1.7483.2.2.3.7.1.1.4 | |||
| tnAmplifierCardConfigScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.1 | |||
| tnAmplifierCardConfigGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.2 | |||
| tnAmplifierMeshCardConfigScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.3 | |||
| tnAmplifierMeshCardConfigGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.4 | |||
| tnAmplifierCompliances | 1.3.6.1.4.1.7483.2.2.3.7.1.2 | |||
| tnAmplifierPortConfigCompliances | 1.3.6.1.4.1.7483.2.2.3.7.1.2.1 | |||
| tnAmplifierPortConfigCompliance | 1.3.6.1.4.1.7483.2.2.3.7.1.2.1.1 | |||
| tnAmplifierPortInfoCompliances | 1.3.6.1.4.1.7483.2.2.3.7.1.2.2 | |||
| tnAmplifierPortInfoCompliance | 1.3.6.1.4.1.7483.2.2.3.7.1.2.2.1 | |||
| tnAmplifierCardInfoCompliances | 1.3.6.1.4.1.7483.2.2.3.7.1.2.3 | |||
| tnAmplifierCardInfoCompliance | 1.3.6.1.4.1.7483.2.2.3.7.1.2.3.1 | |||
| tnAmplifierCardConfigCompliances | 1.3.6.1.4.1.7483.2.2.3.7.1.2.4 | |||
| tnAmplifierCardConfigCompliance | 1.3.6.1.4.1.7483.2.2.3.7.1.2.4.1 | |||
| tnAmplifierPortConfig | 1.3.6.1.4.1.7483.2.2.3.7.4 | |||
| I32 tnAmplifierPortConfigAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.4.1 | Integer32 | read-only | Total number of attributes in tnAmplifierPortConfigTable. |
| tnAmplifierPortConfigTable | 1.3.6.1.4.1.7483.2.2.3.7.4.2 | not-accessible | The provisioned ports on an amplifier card. | |
| tnAmplifierPortConfigEntry | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1 | not-accessible | ||
| U32 tnAmplifierPortPowerGain | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.1 | Unsigned32 | read-create | The following description applies to the signal port of the amplifier card: Current configurable ranges and defaults: A2325A: (1600..3200), 1600 A2P2125 (port 1): ( 200..2000), 1000 A2P2125 (port 4): (1500..3100), 1500 A4PSWG (port 1): ( 700..2900), 700 A4PSWG (port 4): ( 200..2000), 1000 AA2DONW: (1300..2300), 1300 AAR_8A: (1000..2000), 1500 AHPHG: (1300..3300), 1300 AHPLG: ( 600..2400), 600 ALPFGK: (1300..2300), 1800 ALPFGT: (1300..2300), 1800 ALPHG: (1000..3000), 1000 AM2017B: ( 600..2400), 600 AM2032A: (2600..4000), 2600 AM2125A: (1500..3100), 1500 AM2125B: (1500..3100), 1500 AM2318A: ( 700..2400), 700 AM2325B: (1600..3200), 1600 AM2625A: (1600..3000), 1600 ASWG: ( 700..2900), 700 MESH4: ( 700..2400), 700 RA2P: ( 200..2000), 1000. |
| U32 tnAmplifierPortPowerGainMin | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.2 | Unsigned32 | read-create | The following description applies to the signal port of the amplifier card: This value is used by power management. Current configurable ranges and defaults: A2325A: (1600..3200), 1600 A2P2125 (port 1): ( 0..2500), 700 A2P2125 (port 4): (1500..3100), 1500 A4PSWG (port 1): ( 0..2500), 700 A4PSWG (port 4): ( 700..2900), 700 AA2DONW: (1300..2300), 1300 AHPHG: (1300..3300), 1300 AHPLG: ( 600..2400), 600 ALPFGK: (1300..2300), 1300 ALPFGT: (1300..2300), 1300 ALPHG: (1000..3000), 1000 AM2017B: ( 600..2400), 600 AM2032A: (2600..4000), 2600 AM2125A: (1500..3100), 1500 AM2125B: (1500..3100), 1500 AM2318A: ( 700..2400), 700 AM2325B: (1600..3200), 1600 AM2625A: (1600..3000), 1600 ASWG: ( 700..2900), 700 MESH4: ( 700..2400), 700 RA2P: ( 0..2500), 700. |
| U32 tnAmplifierPortPowerGainMax | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.3 | Unsigned32 | read-create | The following description applies to the signal port of the amplifier card: This value is used by power management. Current configurable ranges and defaults: A2325A: (1600..3200), 3200 A2P2125 (port 1): ( 0..2500), 2500 A2P2125 (port 4): (1500..3100), 3100 A4PSWG (port 1): ( 0..2500), 2500 A4PSWG (port 4): ( 700..2900), 2200 AA2DONW: (1300..2300), 2300 AHPHG: (1300..3300), 3300 AHPLG: ( 600..2400), 2400 ALPFGK: (1300..2300), 2300 ALPFGT: (1300..2300), 2300 ALPHG: (1000..3000), 3000 AM2017B: ( 600..2400), 2400 AM2032A: (2600..4000), 4000 AM2125A: (1500..3100), 3100 AM2125B: (1500..3100), 3100 AM2318A: ( 700..2400), 2400 AM2325B: (1600..3200), 3200 AM2625A: (1600..3000), 3000 ASWG: ( 700..2900), 2200 MESH4: ( 700..2400), 2400 RA2P: ( 0..2500), 2500. |
| U32 tnAmplifierPortPowerGainBackoff | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.4 | Unsigned32 | read-create | The following description applies to the signal port of the amplifier card: The adjustment made to min/max gain by power management when commissioning. Current configurable range: 0 to 1000. |
| T/F tnAmplifierPortEnable | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.5 | TruthValue | read-create | The following description applies to the signal port of the amplifier card: This attribute allows a network operator to kick start the laser. Setting a value of false is restricted. |
| T/F tnAmplifierPortAutoReEnableMode | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.6 | TruthValue | read-create | The following description applies to the ampOutThruIn port of the amplifier card: Auto re-enable mode. |
| U32 tnAmplifierPortPowerSpanRepairMargin | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.8 | Unsigned32 | read-only | The following description applies to the signal port of the amplifier card: EPT - splice margin. This is calculated as the absolute value of the difference between tnAmplifierPortPowerGainMax and tnAmplifierPortPowerGainBackoff. Current ranges and defaults: ASWG: (700..2900), 2200 A4PSWG: (700..2900), 2200. |
| U32 tnAmplifierPortPowerDeltaMax | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.9 | Unsigned32 | read-create | The following description applies to the signal port of the amplifier card: EPT - delta max. Current configurable range: 0 to 500. |
| I32 tnAmplifierPortTargetTilt | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.10 | Integer32 | read-create | The following description applies to the signal port of the amplifier card: EPT - Tilt. Configurable ranges and defaults: A2325A: (-300.. 0), 0 A2P2125: (-300.. 300), 0 A2P2125: (-400.. 400), 0 AHPHG: (-300.. 0), 0 AHPLG: (-300.. 0), 0 ALPHG: (-300.. 0), 0 AM2017B: (-300.. 0), 0 AM2032A: (-300.. 0), 0 AM2125A: (-400.. 400), 0 AM2125B: (-400.. 400), 0 AM2318A: (-400.. 400), 0 AM2325B: (-300.. 0), 0 AM2625A: (-600..-100), -100 MESH4: (-400.. 400), 0 RA2P: (-300.. 300), 0 ASWG: (-400.. 400), 0 A4PSWG: (-400.. 400), 0. |
| INT tnAmplifierPortFunction | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.11 | INTEGER | read-only | Indicates the functional type of the amplifier card. |
| T/F tnAmplifierPortAprDisable | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.12 | TruthValue | read-create | The Auto Power Recovery Disable. |
| I32 tnAmplifierPortSRSTiltACoeffDCM | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.13 | Integer32 | read-create | Modeling coefficient for the SRSTilt = A*Pout(mW) equation, for DCM. Current configurable range: 0 to 10000. |
| I32 tnAmplifierPortMaxFlatGainOffset | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.14 | Integer32 | read-create | Provides a correction to the assumed max flat gain value. Current configurable range: -500 to 500. |
| I32 tnAmplifierPortGainTilt | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.15 | Integer32 | read-only | Current OA tilt setting for the signal port of the amplifier card. Current ranges: AM2625A: -600 to -100 AM2032A: -300 to 0 ASWG: -400 to 400 A4PSWG: -400 to 400. |
| INT tnAmplifierPortAprHoldOffTime | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.16 | INTEGER | read-create | The auto power recovery hold off time. |
| INT tnAmplifierPortLosMode | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.17 | INTEGER | read-create | The Amplifier Port LOS Mode. |
| U32 tnAmplifierPortSignalFailThreshold | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.18 | Unsigned32 | read-create | Integer range 4 to 5, representing 10**4 to 10**5. Current configurable range: 4 to 5. |
| U32 tnAmplifierPortSignalDegradeThreshold | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.19 | Unsigned32 | read-create | Integer range 5 to 9, representing 10**5 to 10**9. Current configurable range: 5 to 9. |
| U32 tnAmplifierPortVoaSet | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.20 | Unsigned32 | read-create | The following description applies to the LINEOUT port of the uni-directionalamplifier card: Current configurable range: 0 to 1800. |
| INT tnAmplifierPortGainRange | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.21 | INTEGER | read-create | Gain range for ASWG/A4PSWG cards. |
| INT tnAmplifierPortAprMode | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.22 | INTEGER | read-create | APR Mode for ASWG/A4PSWG cards. |
| INT tnAmplifierPortOperatingMode | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.23 | INTEGER | read-create | ASE Mode for ASWG/A4PSWG cards. Set to power (node sets LD to LOSN as well) Set to gain (node sets LD to LOSA as well). |
| I32 tnAmplifierPortSignalPowerTarget | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.24 | Integer32 | read-create | Value used when tnAmplifierPortOperatingMode is in power mode. Current configurable range: -400 to 1000. |
| I32 tnAmplifierHybridPortConfigAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.4.3 | Integer32 | read-only | Total number of attributes in tnAmplifierHybridPortConfigTable. |
| tnAmplifierHybridPortConfigTable | 1.3.6.1.4.1.7483.2.2.3.7.4.4 | not-accessible | The provisioned ports on an hybrid amplifier card. | |
| tnAmplifierHybridPortConfigEntry | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1 | not-accessible | ||
| U32 tnAmplifierHybridPortVoaAttenuation | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.1 | Unsigned32 | read-create | Hybrid amplifier port VOA attenuation. Current configurable range: 0 to 2000. |
| U32 tnAmplifierHybridPortInitialMidLoss | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.2 | Unsigned32 | read-create | Hybrid amplifier port initial VOA attenuation. Current configurable range: 0 to 2000. |
| U32 tnAmplifierHybridPortInitialAgcTargetGain | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.3 | Unsigned32 | read-create | Hybrid amplifier port initial AGC target gain. Current configurable range: 200 to 2000. |
| U32 tnAmplifierHybridPortVoaMinAttenuation | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.4 | Unsigned32 | read-create | Hybrid amplifier port VOA minimum attenuation. Current configurable range: 0 to 2000. |
| U32 tnAmplifierHybridPortVoaMaxAttenuation | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.5 | Unsigned32 | read-create | Hybrid amplifier port VOA maximum attenuation. Current configurable range: 0 to 2000. |
| tnAmplifierPortInfo | 1.3.6.1.4.1.7483.2.2.3.7.5 | |||
| I32 tnAmplifierPortInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.5.1 | Integer32 | read-only | Total number of attributes in tnAmplifierPortInfoTable. |
| tnAmplifierPortInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.5.2 | not-accessible | The equipped ports on an amplifier card. | |
| tnAmplifierPortInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1 | not-accessible | ||
| I32 tnAmplifierPortInternalAmpModuleTemperature | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.1 | Integer32 | read-only | The following description applies to the signal port of the amplifier card: The temperature of the laser. Current range: -5 to 35. |
| I32 tnAmplifierPortPowerIn | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.2 | Integer32 | read-only | The following description applies to the fromDcm and line ports of the amplifier card: The total input power Current ranges: ASWG: -9900, -3600 to 1700 A4PSWG: -9900, -3600 to 1700. |
| I32 tnAmplifierPortPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.3 | Integer32 | read-only | The following description applies to the signal and toDcm ports of the amplifier card: The total output power. Current ranges: AM2625A: -9900, -900 to 2900 AM2032A: -9900, -300 to 2300 ASWG: -9900, -1100 to 2550 A4PSWG: -9900, -1100 to 2550. |
| I32 tnAmplifierPortSignalPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.4 | Integer32 | read-only | The following description applies to the signal port of the amplifier card: The total input power plus the programmed gain. Current Ranges: ASWG: -9900, -1100 to 2550 A4PSWG: -9900, -1100 to 2550. |
| I32 tnAmplifierPortInputToOutputGain | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.5 | Integer32 | read-only | The following description applies to the LINEOUT port of the uni-directional amplifier card. Current Ranges: ASWG: -9900, -300 to 2900 A4PSWG: -9900, -300 to 2900. |
| I32 tnAmplifierPortDCMInPower | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.6 | Integer32 | read-only | The following description applies to the DCM In port of the amplifier card. -9900 indicates no measured power. Current range: -9900, -3000 to 2000. |
| I32 tnAmplifierPortDCMOutPower | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.7 | Integer32 | read-only | The following description applies to the DCM Out port of the amplifier card. -9900 indicates no measured power. Current range: -9900, -3000 to 2000. |
| I32 tnAmplifierPortActualTilt | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.8 | Integer32 | read-only | The following description applies to the signal port of the amplifier card: Current range: -1000 to 500. |
| U32 tnAmplifierPortWtOcmMonitorPortOut | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.9 | Unsigned32 | read-only | The associated WTOCM In port associated to the LD. Current range: 0 to 0xFFFFFFFF. |
| I32 tnAmplifierPortOSCTxPowerIn | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.10 | Integer32 | read-only | The EDFA module OSC transmitted input power of the amplifier card. -9900 indicates no measured power. Current ranges: A2P2125: -1500 to 1100 AM2032A: -1500 to 1100 AM2125A: -1500 to 1100 AM2125B: -1500 to 1100 AM2318A: -1500 to 1100 AM2625A: -2000 to 1100 ASWG: -1500 to 1100 A4PSWG: -1500 to 1100. |
| I32 tnAmplifierPortOSCTxPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.11 | Integer32 | read-only | The EDFA module OSC transmitted output power of the amplifier card. -9900 indicates no measured power. Current ranges: A2P2125: -1500 to 1100 AA2DONW: -1500 to 1500 AM2032A: -1500 to 1100 AM2125A: -1500 to 1100 AM2125B: -1500 to 1100 AM2318A: -1500 to 1100 AM2625A: 0 to 1500 ASWG: -1500 to 1100 A4PSWG: -1500 to 1100. |
| T/F tnAmplifierPortTestingActive | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.12 | TruthValue | read-only | Node sets to true when testing in progress on port (logic). |
| I32 tnAmplifierMeshPortInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.5.3 | Integer32 | read-only | Total number of attributes in tnAmplifierMeshPortInfoTable. |
| tnAmplifierMeshPortInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.5.4 | not-accessible | The equipped ports on a mesh card. | |
| tnAmplifierMeshPortInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.5.4.1 | not-accessible | ||
| I32 tnAmplifierMeshPortPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.4.1.1 | Integer32 | read-only | The following description applies to the output port of the mesh card: The total output power. -9900 indicates no measured power. |
| I32 tnAmplifierMeshPortSignalPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.4.1.2 | Integer32 | read-only | The following description applies to the output port of the mesh card: The total input power plus the programmed gain. -9900 indicates no measured power. |
| I32 tnAmplifierMeshPortInputToOutputGain | 1.3.6.1.4.1.7483.2.2.3.7.5.4.1.3 | Integer32 | read-only | The following description reports the gain from sigIn to sigOut ports of the MESH4 card: OA module gain - EVOA loss - SEEPROM loss of splitter. Current range: MESH4: -1100 to 2400. |
| I32 tnAmplifierHybridPortInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.5.5 | Integer32 | read-only | Total number of attributes in tnAmplifierHybridPortInfoTable. |
| tnAmplifierHybridPortInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.5.6 | not-accessible | The equipped ports on an hybrid amplifier card. | |
| tnAmplifierHybridPortInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.5.6.1 | not-accessible | ||
| U32 tnAmplifierHybridPortInternalAmpModuleTemperature | 1.3.6.1.4.1.7483.2.2.3.7.5.6.1.1 | Unsigned32 | read-only | Hybrid Amplifier Port Internal Module Temperature. |
| tnAmplifierCardInfo | 1.3.6.1.4.1.7483.2.2.3.7.6 | |||
| I32 tnAmplifierCardInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.6.1 | Integer32 | read-only | Total number of attributes in tnAmplifierCardInfoTable. |
| tnAmplifierCardInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.6.2 | not-accessible | The equipped pumps and other values on an amplifier card. | |
| tnAmplifierCardInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1 | not-accessible | ||
| I32 tnAmplifierCardOAMPump1Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.1 | Integer32 | read-only | The current temperature of the OA Laser Pump 1. |
| I32 tnAmplifierCardOAMPump2Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.2 | Integer32 | read-only | The current temperature of the OA Laser Pump 2. |
| I32 tnAmplifierCardOAMPump3Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.3 | Integer32 | read-only | The current temperature of the OA Laser Pump 3. |
| I32 tnAmplifierCardOAMPump1Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.4 | Integer32 | read-only | The current bias of the OA Laser Pump 1. |
| I32 tnAmplifierCardOAMPump2Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.5 | Integer32 | read-only | The current bias of the OA Laser Pump 2. |
| I32 tnAmplifierCardOAMPump3Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.6 | Integer32 | read-only | The current bias of the OA Laser Pump 3. |
| I32 tnAmplifierCardOptIntSpanLoss | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.7 | Integer32 | read-only | The span loss value. Current range: 0 to 9900. |
| I32 tnAmplifierCardOAMPump4Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.8 | Integer32 | read-only | The current temperature of the OA Laser Pump 4. |
| I32 tnAmplifierCardOAMPump5Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.9 | Integer32 | read-only | The current temperature of the OA Laser Pump 5. |
| I32 tnAmplifierCardOAMPump6Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.10 | Integer32 | read-only | The current temperature of the OA Laser Pump 6. |
| I32 tnAmplifierCardOAMPump4Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.11 | Integer32 | read-only | The current bias of the OA Laser Pump 4. |
| I32 tnAmplifierCardOAMPump5Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.12 | Integer32 | read-only | The current bias of the OA Laser Pump 5. |
| I32 tnAmplifierCardOAMPump6Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.13 | Integer32 | read-only | The current bias of the OA Laser Pump 6. |
| I32 tnAmplifierMeshCardInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.6.3 | Integer32 | read-only | Total number of attributes in tnAmplifierMeshCardInfoTable. |
| tnAmplifierMeshCardInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.6.4 | not-accessible | The measured values on an amplifier module in a mesh card. | |
| tnAmplifierMeshCardInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1 | not-accessible | ||
| I32 tnAmplifierMeshCardInternalTemperature | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.1 | Integer32 | read-only | The following description applies to the amplifier module in the mesh card: The temperature of the laser. Current range: MESH4: -5 to 35. |
| I32 tnAmplifierMeshCardPowerIn | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.2 | Integer32 | read-only | The following description applies to the input port of the amplifier module in the mesh card: The total input power. -9900 indicates no measured power. |
| I32 tnAmplifierMeshCardPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.3 | Integer32 | read-only | The following description applies to the output port of the amplifier module in the mesh card: The total output power. -9900 indicates no measured power. |
| I32 tnAmplifierMeshCardSignalPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.4 | Integer32 | read-only | The following description applies to the output port of the amplifier module in the mesh card: The total input power plus the programmed gain. -9900 indicates no measured power. |
| I32 tnAmplifierMeshCardInputToOutputGain | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.5 | Integer32 | read-only | The following description applies to the output port of the amplifier module in the mesh card: Current range: MESH4: -1100 to 2400. |
| I32 tnAmplifierMeshCardGainTilt | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.6 | Integer32 | read-only | Current OA tilt setting for the output port of the amplifier module in the mesh card. |
| I32 tnAmplifierMeshCardActualTilt | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.7 | Integer32 | read-only | The following description applies to the output port of the amplifier module in the mesh card: Current range: MESH4: -1000 to 500. |
| I32 tnAmplifierHybridCardInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.6.5 | Integer32 | read-only | Total number of attributes in tnAmplifierHybridCardInfoTable. |
| tnAmplifierHybridCardInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.6.6 | not-accessible | The measured values on an amplifier module in a mesh card. | |
| tnAmplifierHybridCardInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1 | not-accessible | ||
| I32 tnAmplifierHybridCardOAMPump1Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.1 | Integer32 | read-only | The current temperature of the OA Laser Pump 1. |
| I32 tnAmplifierHybridCardOAMPump2Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.2 | Integer32 | read-only | The current temperature of the OA Laser Pump 2. |
| I32 tnAmplifierHybridCardOAMPump1Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.3 | Integer32 | read-only | The current bias of the OA Laser Pump 1. |
| I32 tnAmplifierHybridCardOAMPump2Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.4 | Integer32 | read-only | The current bias of the OA Laser Pump 2. |
| I32 tnAmplifierHybridCardOAMPump3Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.5 | Integer32 | read-only | The current temperature of the OA Laser Pump 3. |
| I32 tnAmplifierHybridCardOAMPump4Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.6 | Integer32 | read-only | The current temperature of the OA Laser Pump 4. |
| I32 tnAmplifierHybridCardOAMPump3Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.7 | Integer32 | read-only | The current bias of the OA Laser Pump 3. |
| I32 tnAmplifierHybridCardOAMPump4Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.8 | Integer32 | read-only | The current bias of the OA Laser Pump 4. |
| tnAmplifierCardConfig | 1.3.6.1.4.1.7483.2.2.3.7.7 | |||
| I32 tnAmplifierCardConfigAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.7.1 | Integer32 | read-only | Total number of attributes in tnAmplifierCardConfigTable. |
| tnAmplifierCardConfigTable | 1.3.6.1.4.1.7483.2.2.3.7.7.2 | not-accessible | The configurable values on an amplifier card. | |
| tnAmplifierCardConfigEntry | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1 | not-accessible | ||
| INT tnAmplifierCardOptIntDetection | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.1 | INTEGER | read-create | The status of the Optical Intrusion detection feature. |
| I32 tnAmplifierCardOptIntBaseline | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.2 | Integer32 | read-create | The optical intrusion baseline value, with -100 means no value has been set. Current configurable range: -100, 100 to 5000. |
| I32 tnAmplifierCardOptIntLossThreshold | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.3 | Integer32 | read-create | The optical intrusion loss threshold value. Current configurable range: 100 to 500. |
| I32 tnAmplifierCardOptIntPollPeriod | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.4 | Integer32 | read-create | The optical intrusion poll period. Current configurable range: 20 to 120. |
| TNC tnAmplifierCardOptIntClearAlarm | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.5 | TnCommand | read-create | Clears optical intrusion alarm. |
| T/F tnAmplifierCardAsonAddDropPlannedForOps | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.6 | TruthValue | read-create | Used for ASON nodes running GMRE. The value indicates if an LD defining the add/drop block has been planned to accept OPSA OCH protected services. |
| I32 tnAmplifierMeshCardConfigAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.7.3 | Integer32 | read-only | Total number of attributes in tnAmplifierMeshCardConfigTable. |
| tnAmplifierMeshCardConfigTable | 1.3.6.1.4.1.7483.2.2.3.7.7.4 | not-accessible | The provisioned parameters on an amplifier module in a mesh card. | |
| tnAmplifierMeshCardConfigEntry | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1 | not-accessible | ||
| U32 tnAmplifierMeshCardPowerGain | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.1 | Unsigned32 | read-create | The following description applies to the output port of the amplifier module in the mesh card: Current configurable range: MESH4: 700 to 2400. |
| U32 tnAmplifierMeshCardPowerGainMin | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.2 | Unsigned32 | read-create | The following description applies to the output port of the amplifier module in the mesh card: This value is used by power management. Current configurable range: MESH4: 700 to 2400. |
| U32 tnAmplifierMeshCardPowerGainMax | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.3 | Unsigned32 | read-create | The following description applies to the output port of the amplifier module in the mesh card: This value is used by power management. Current configurable range: MESH4: 700 to 2400. |
| I32 tnAmplifierMeshCardTargetTilt | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.4 | Integer32 | read-create | The following description applies to the output port of the amplifier module in the mesh card: EPT - Tilt. Current configurable range: MESH4: -400 to 400. |
| U32 tnAmplifierMeshCardVoaSet | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.5 | Unsigned32 | read-create | The following description applies to the output port of the amplifier module in the mesh card: Current configurable range: MESH4: 0 to 1800. |
| I32 tnAmplifierMeshCardCommonEgressPower | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.6 | Integer32 | read-create | Common Egress Power. This is the per channel default egress power Current configurable range: MESH4: -1000 to 1000. |
RFC description
Vendor-private MIB for Tropic optical amplifier equipment managing optical signal amplification and performance monitoring.
Start monitoring Nokia (Alcatel-Lucent) Tropic DWDM optical transport network element (optical amplifier gain/fault status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.