TROPIC-SHELF-MIB

All MIBs › TROPIC-SHELF-MIB

Organization: Nokia

Last Updated: 2016-06-03

Category: Nokia Optical Transport

Description:

Tracks hardware inventory, power, and environmental status for shelves in Nokia Tropic optical transport systems.

Imported Objects

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

From TROPIC-GLOBAL-REG

tnShelfMIB	OBJECT-IDENTITY
tnShelfModules	OBJECT-IDENTITY

From TROPIC-TC

AluWdmWtClkValues
TnCommand
TnRackSize
TropicCardCLEI
TropicCardManufacturingPartNumber
TropicCardSerialNumber
TropicLEDColorType
TropicLEDStateType
TropicShelfIndexType

What Is TROPIC-SHELF-MIB?

TROPIC-SHELF-MIB is a private vendor MIB from Nokia for its Tropic WDM optical transport product line, managing the shelf -- the physical chassis that houses line cards -- covering hardware inventory, power, and environmental status. It exposes inventory data (shelf type, identity), configuration parameters, and environmental/power status readings for the chassis as a whole. In monitoring terms this is a clear hardware-status MIB, tracking chassis-level environmental conditions such as power supply status and likely temperature/fan health (implied by 'environmental status'), which is exactly the data needed to catch a failing power feed or overheating shelf before it takes down every card it houses. It works alongside TROPIC-CARD-MIB and TROPIC-OPTICALCARD-MIB (which describe the cards the shelf contains) and the Tropic notification MIBs that alarm on shelf-level fault conditions. It is deployed in Nokia Tropic WDM optical transport network elements, typically in carrier central offices or points of presence, and documentation on the TROPIC-SHELF-MIB MIB consistently emphasizes this shelf-wide power and environmental role rather than individual card-level detail.

IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-SHELF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia Tropic WDM optical transport shelf/chassis

Monitoring Examples

No sample object names were provided for this module, but consistent with its stated purpose an admin would poll shelf-level power and environmental status objects to confirm redundant power feeds are both healthy and that environmental readings (e.g., temperature) are within normal range, since a shelf-level power or environmental alarm here would put every housed line card at risk simultaneously.

OIDs

OID symbolic	OID numeric	Type	Access	Description
TNC tnShelfActivityMt0cSwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.18	TnCommand	read-create	Perform an activity switch on the MT0C. When read, this object returns noCmd.
TNC tnShelfActivitySwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.7	TnCommand	read-create	Perform an activity switch on this shelf. When read, this object returns noCmd.
T/F tnShelfAINS	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.13	TruthValue	read-create	Applicable to the 1830 PSS-32.
OCT tnShelfAlmProfName	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.44	OCTET STRING	read-create
tnShelfBasics	1.3.6.1.4.1.7483.2.2.1.1.2.1
U32 tnShelfBranchPowerCap1	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.45	Unsigned32	read-create
U32 tnShelfBranchPowerCap2	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.46	Unsigned32	read-create
U32 tnShelfBranchPowerCap3	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.47	Unsigned32	read-create
U32 tnShelfBranchPowerCap4	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.48	Unsigned32	read-create
U32 tnShelfBranchPowerCap5	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.49	Unsigned32	read-create
U32 tnShelfBranchPowerCap6	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.50	Unsigned32	read-create
I32 tnShelfBranchRemainingPwrCap1	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.51	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap2	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.52	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap3	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.53	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap4	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.54	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap5	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.55	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap6	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.56	Integer32	read-create
U32 tnShelfCalculatedLoad	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.28	Unsigned32	read-only	This attribute shall be calculated by adding the pre-defined maximum power consumption of each plugged in or pre-provisioned card and then dividing the sum by tnShelfVoltageFloor.
U32 tnShelfCalculatedLoadAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.37	Unsigned32	read-only	This attribute shall be calculated by adding the pre-defined maximum power consumption of each plugged in or pre-provisioned card and then dividing the sum by tnShelfVoltageFloor.
ALU tnShelfClkSwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.29	AluWdmWtClkValues	read-create	Clock Switch on shelf level.
tnShelfCompliance	1.3.6.1.4.1.7483.2.2.1.1.1.2.1
tnShelfCompliances	1.3.6.1.4.1.7483.2.2.1.1.1.2
tnShelfConf	1.3.6.1.4.1.7483.2.2.1.1.1
STR tnShelfDescr	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.3	SnmpAdminString	read-create	Shelf description.
tnShelfEntry	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1		not-accessible
INT tnShelfExpectedAmps	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.11	INTEGER	read-create	This attribute is associated with shelf pre-provisioning, and defines a single value for the shelf which applies to both PSFs. The value can be edited by the network manager. A mismatch alarm will be generated against any PSF that does not agree with the value of this attribute. An excess load alarm will be raised against any inserted circuit pack which cannot be provided power without exceeding the actual or provisioned shelf amperage (whichever is less). Auto means when the shelf is equipped, the EC reads the id of the two power filters and takes the value (they should both be the same, but just in case) of the smaller one as the shelf power capacity. Current configurable values: PSS4: 3.7, 8.5, 20.6. PSS32: auto, 20, 30, 50, 60, 70. PSS16: auto, 20, 35. PSS36: If only PFC power filter is supported, this attribute is read-only, with the value 150. If both PFC and PFB50 power filters are supported, this attribute is provisionable with values auto, 100, 150. PSS64: 275.
ALU tnShelfExpectedPfa	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.20	AluWdmExpectedAmpPF	read-create	The expectedamps for PF card located in slot 2 when the expectedamps is mix.
ALU tnShelfExpectedPfb	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.21	AluWdmExpectedAmpPF	read-create	The expectedamps for PF card located in slot 3 when the expectedamps is mix.
INT tnShelfExpectedVolts	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.25	INTEGER	read-create	Nominal voltage for the shelf. v48 - The input supply voltage is nominally -48 V dc. v60 - The input supply voltage is nominally -60 V dc. This has the effect of setting the voltage alarms to the ends of the standard operating range for the specified input supply voltage.
INT tnShelfExpectedVoltsAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.30	INTEGER	read-create	Nominal AC voltage for the shelf. v110 - The input supply voltage is nominally -110 V ac. v220 - The input supply voltage is nominally -220 V ac. This has the effect of setting the voltage alarms to the ends of the standard operating range for the specified input supply voltage.
U32 tnShelfExternalAcPower	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.34	Unsigned32	read-create	The power of the external AC power box.
INT tnShelfFabricActivityState	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.58	INTEGER	read-only	Fabric activity states.
OCT tnShelfFabricEqpsLEDColor	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.61	OCTET STRING	read-only	The color of the CRU EQPS status LED.
INT tnShelfFabricEQPStatus	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.57	INTEGER	read-only	Fabric location status.
INT tnShelfFabricFailures	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.59	INTEGER	read-only	Fabric failure mode.
INT tnShelfFabricReadyToProtect	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.62	INTEGER	read-only	Fabric ready to protect status.
INT tnShelfFabricUsage	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.60	INTEGER	read-only	Fabric Usage status.
U32 tnShelfFilterInspectionInterval	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.42	Unsigned32	read-create	Filter inspection interval time in weeks.
T/F tnShelfFilterMonitorStatus	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.41	TruthValue	read-create	Filter maintenance status.
U32 tnShelfFilterStartDate	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.43	Unsigned32	read-create	Filter inspection start date.
tnShelfGroup	1.3.6.1.4.1.7483.2.2.1.1.1.1.1
tnShelfGroups	1.3.6.1.4.1.7483.2.2.1.1.1.1
U32 tnShelfHighVoltageThreshold	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.22	Unsigned32	read-create	Shelf high voltage threshold. Default is depending on value of tnShelfExpectedVolts: v48 - 5700 v60 - 7200. Current configurable values: 0 to 8500, in increments of 50.
U32 tnShelfHighVoltageThresholdAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.31	Unsigned32	read-create	Shelf high ac voltage threshold. Default is depending on value of tnShelfExpectedVoltsAC: v110 - 12000. v220 - 24000. Current configurable values: 9000 to 26400, in increments of 50.
TRO tnShelfIndex	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.1	TropicShelfIndexType	not-accessible
INT tnShelfInventoryAction	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.64	INTEGER	read-create	Copies the shelf Remote Inventory information from the shelf inventory HW into the database or from database to the shelf inventory HW.
T/F tnShelfIsUnmanaged	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.10	TruthValue	read-create	Indicates a shelf is not being managed. This is set to true for shelves that have no managed inventory.
TNC tnShelfLampTest	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.8	TnCommand	read-create	Perform a lamp test on the shelf. When read, this object returns noCmd.
U32 tnShelfLoadWarningThreshold	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.35	Unsigned32	read-create	Shelf load warning threshold.
INT tnShelfLockout	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.40	INTEGER	read-create	FABRIC card lockout status.
U32 tnShelfLowVoltageThreshold	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.23	Unsigned32	read-create	Shelf low voltage threshold. Default is depending on value of tnShelfExpectedVolts: v48 - 4050 v60 - 5000. Current configurable values: 0 to 8500, in increments of 50.
U32 tnShelfLowVoltageThresholdAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.32	Unsigned32	read-create	Shelf low ac voltage threshold. Default is depending on value of tnShelfExpectedVoltsAC: v110 - 10000. v220 - 20000. Current configurable values: 9000 to 26400, in increments of 50.
T/F tnShelfMateCCReadyToProtect	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.9	TruthValue	read-only
T/F tnShelfMateMt0cReadyToProtect	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.19	TruthValue	read-only
INT tnShelfMatrixSize	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.26	INTEGER	read-create	The matrix size of the shelf. notApplicable - Not applicable to this shelf. ms1dot2T - 1.2T shelf. ms1dot9T - 1.9T shelf. Sets are not supported.
tnShelfMibModule	1.3.6.1.4.1.7483.1.1.2.2.1.1			The shelf MIB for Nokia network elements.
STR tnShelfName	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.2	SnmpAdminString	read-create	Shelf name (an abbreviated description).
tnShelfObjs	1.3.6.1.4.1.7483.2.2.1.1.2
U32 tnShelfPowerCapacity	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.38	Unsigned32	read-only	Shelf Power Capacity.
OID tnShelfPresentType	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.6	OBJECT IDENTIFIER	read-only	Actual shelf present.
OID tnShelfProgrammedType	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.5	OBJECT IDENTIFIER	read-create	Type of shelf provisioned.
TNR tnShelfRackType	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.63	TnRackSize	read-create	Shelf rack size
I32 tnShelfRemainingPowerCapacity	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.39	Integer32	read-only	Shelf Remaining Power Capacity.
TRO tnShelfRiCLEI	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.3	TropicCardCLEI	read-only
STR tnShelfRiCompanyID	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.1	SnmpAdminString	read-only
tnShelfRiDataEntry	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1		not-accessible
tnShelfRiDataGroup	1.3.6.1.4.1.7483.2.2.1.1.1.1.3
tnShelfRiDataTable	1.3.6.1.4.1.7483.2.2.1.1.2.1.3		not-accessible	Applicable to PSS4.
STR tnShelfRiDate	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.8	SnmpAdminString	read-only
STR tnShelfRiExtraData	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.9	SnmpAdminString	read-only
STR tnShelfRiFactoryID	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.6	SnmpAdminString	read-only
TRO tnShelfRiManufacturingPartNumber	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.4	TropicCardManufacturingPartNumber	read-only
STR tnShelfRiMnemonic	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.2	SnmpAdminString	read-only
TRO tnShelfRiSerialNumber	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.7	TropicCardSerialNumber	read-only
STR tnShelfRiSWPartNum	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.5	SnmpAdminString	read-only
tnShelfScalarsGroup	1.3.6.1.4.1.7483.2.2.1.1.1.1.2
I32 tnShelfSerialNum	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.4	Integer32	read-create	Shelf serial number. Applicable to the 1696R.
STR tnShelfSerialNumber	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.12	SnmpAdminString	read-create	Applicable to the 1830 PSS-32 DCM, SFD44 and ITLB shelves.
TRO tnShelfStatusLEDColor	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.15	TropicLEDColorType	read-only	The color of the shelf status LED.
TRO tnShelfStatusLEDState	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.16	TropicLEDStateType	read-only	The state of the shelf status LED.
tnShelfTable	1.3.6.1.4.1.7483.2.2.1.1.2.1.1		not-accessible
INT tnShelfTimingSwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.36	INTEGER	read-create	System Timing Switch on shelf level.
I32 tnShelfTotal	1.3.6.1.4.1.7483.2.2.1.1.2.1.2	Integer32	read-only	The total number of shelves allocated on a 1696R/1830 ROADM NE.
U32 tnShelfVoltageFloor	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.27	Unsigned32	read-create	Shelf voltage floor. Current configurable range: 3900 to 7200.
U32 tnShelfVoltageFloorAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.33	Unsigned32	read-create	Shelf ac voltage floor. Current configurable range: 9000 to 26400.
U32 tnShelfVoltageThresholdTol	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.24	Unsigned32	read-create	Shelf voltage threshold tolerance. Current configurable values: 100 to 500, in increments of 100.
T/F tnShelfWTMode	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.17	TruthValue	read-create	The Shelf WT Mode.

OID symbolic	OID numeric	Type	Access	Description
tnShelfMibModule	1.3.6.1.4.1.7483.1.1.2.2.1.1			The shelf MIB for Nokia network elements.
tnShelfConf	1.3.6.1.4.1.7483.2.2.1.1.1
tnShelfGroups	1.3.6.1.4.1.7483.2.2.1.1.1.1
tnShelfGroup	1.3.6.1.4.1.7483.2.2.1.1.1.1.1
tnShelfScalarsGroup	1.3.6.1.4.1.7483.2.2.1.1.1.1.2
tnShelfRiDataGroup	1.3.6.1.4.1.7483.2.2.1.1.1.1.3
tnShelfCompliances	1.3.6.1.4.1.7483.2.2.1.1.1.2
tnShelfCompliance	1.3.6.1.4.1.7483.2.2.1.1.1.2.1
tnShelfObjs	1.3.6.1.4.1.7483.2.2.1.1.2
tnShelfBasics	1.3.6.1.4.1.7483.2.2.1.1.2.1
tnShelfTable	1.3.6.1.4.1.7483.2.2.1.1.2.1.1		not-accessible
tnShelfEntry	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1		not-accessible
TRO tnShelfIndex	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.1	TropicShelfIndexType	not-accessible
STR tnShelfName	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.2	SnmpAdminString	read-create	Shelf name (an abbreviated description).
STR tnShelfDescr	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.3	SnmpAdminString	read-create	Shelf description.
I32 tnShelfSerialNum	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.4	Integer32	read-create	Shelf serial number. Applicable to the 1696R.
OID tnShelfProgrammedType	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.5	OBJECT IDENTIFIER	read-create	Type of shelf provisioned.
OID tnShelfPresentType	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.6	OBJECT IDENTIFIER	read-only	Actual shelf present.
TNC tnShelfActivitySwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.7	TnCommand	read-create	Perform an activity switch on this shelf. When read, this object returns noCmd.
TNC tnShelfLampTest	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.8	TnCommand	read-create	Perform a lamp test on the shelf. When read, this object returns noCmd.
T/F tnShelfMateCCReadyToProtect	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.9	TruthValue	read-only
T/F tnShelfIsUnmanaged	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.10	TruthValue	read-create	Indicates a shelf is not being managed. This is set to true for shelves that have no managed inventory.
INT tnShelfExpectedAmps	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.11	INTEGER	read-create	This attribute is associated with shelf pre-provisioning, and defines a single value for the shelf which applies to both PSFs. The value can be edited by the network manager. A mismatch alarm will be generated against any PSF that does not agree with the value of this attribute. An excess load alarm will be raised against any inserted circuit pack which cannot be provided power without exceeding the actual or provisioned shelf amperage (whichever is less). Auto means when the shelf is equipped, the EC reads the id of the two power filters and takes the value (they should both be the same, but just in case) of the smaller one as the shelf power capacity. Current configurable values: PSS4: 3.7, 8.5, 20.6. PSS32: auto, 20, 30, 50, 60, 70. PSS16: auto, 20, 35. PSS36: If only PFC power filter is supported, this attribute is read-only, with the value 150. If both PFC and PFB50 power filters are supported, this attribute is provisionable with values auto, 100, 150. PSS64: 275.
STR tnShelfSerialNumber	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.12	SnmpAdminString	read-create	Applicable to the 1830 PSS-32 DCM, SFD44 and ITLB shelves.
T/F tnShelfAINS	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.13	TruthValue	read-create	Applicable to the 1830 PSS-32.
TRO tnShelfStatusLEDColor	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.15	TropicLEDColorType	read-only	The color of the shelf status LED.
TRO tnShelfStatusLEDState	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.16	TropicLEDStateType	read-only	The state of the shelf status LED.
T/F tnShelfWTMode	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.17	TruthValue	read-create	The Shelf WT Mode.
TNC tnShelfActivityMt0cSwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.18	TnCommand	read-create	Perform an activity switch on the MT0C. When read, this object returns noCmd.
T/F tnShelfMateMt0cReadyToProtect	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.19	TruthValue	read-only
ALU tnShelfExpectedPfa	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.20	AluWdmExpectedAmpPF	read-create	The expectedamps for PF card located in slot 2 when the expectedamps is mix.
ALU tnShelfExpectedPfb	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.21	AluWdmExpectedAmpPF	read-create	The expectedamps for PF card located in slot 3 when the expectedamps is mix.
U32 tnShelfHighVoltageThreshold	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.22	Unsigned32	read-create	Shelf high voltage threshold. Default is depending on value of tnShelfExpectedVolts: v48 - 5700 v60 - 7200. Current configurable values: 0 to 8500, in increments of 50.
U32 tnShelfLowVoltageThreshold	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.23	Unsigned32	read-create	Shelf low voltage threshold. Default is depending on value of tnShelfExpectedVolts: v48 - 4050 v60 - 5000. Current configurable values: 0 to 8500, in increments of 50.
U32 tnShelfVoltageThresholdTol	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.24	Unsigned32	read-create	Shelf voltage threshold tolerance. Current configurable values: 100 to 500, in increments of 100.
INT tnShelfExpectedVolts	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.25	INTEGER	read-create	Nominal voltage for the shelf. v48 - The input supply voltage is nominally -48 V dc. v60 - The input supply voltage is nominally -60 V dc. This has the effect of setting the voltage alarms to the ends of the standard operating range for the specified input supply voltage.
INT tnShelfMatrixSize	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.26	INTEGER	read-create	The matrix size of the shelf. notApplicable - Not applicable to this shelf. ms1dot2T - 1.2T shelf. ms1dot9T - 1.9T shelf. Sets are not supported.
U32 tnShelfVoltageFloor	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.27	Unsigned32	read-create	Shelf voltage floor. Current configurable range: 3900 to 7200.
U32 tnShelfCalculatedLoad	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.28	Unsigned32	read-only	This attribute shall be calculated by adding the pre-defined maximum power consumption of each plugged in or pre-provisioned card and then dividing the sum by tnShelfVoltageFloor.
ALU tnShelfClkSwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.29	AluWdmWtClkValues	read-create	Clock Switch on shelf level.
INT tnShelfExpectedVoltsAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.30	INTEGER	read-create	Nominal AC voltage for the shelf. v110 - The input supply voltage is nominally -110 V ac. v220 - The input supply voltage is nominally -220 V ac. This has the effect of setting the voltage alarms to the ends of the standard operating range for the specified input supply voltage.
U32 tnShelfHighVoltageThresholdAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.31	Unsigned32	read-create	Shelf high ac voltage threshold. Default is depending on value of tnShelfExpectedVoltsAC: v110 - 12000. v220 - 24000. Current configurable values: 9000 to 26400, in increments of 50.
U32 tnShelfLowVoltageThresholdAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.32	Unsigned32	read-create	Shelf low ac voltage threshold. Default is depending on value of tnShelfExpectedVoltsAC: v110 - 10000. v220 - 20000. Current configurable values: 9000 to 26400, in increments of 50.
U32 tnShelfVoltageFloorAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.33	Unsigned32	read-create	Shelf ac voltage floor. Current configurable range: 9000 to 26400.
U32 tnShelfExternalAcPower	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.34	Unsigned32	read-create	The power of the external AC power box.
U32 tnShelfLoadWarningThreshold	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.35	Unsigned32	read-create	Shelf load warning threshold.
INT tnShelfTimingSwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.36	INTEGER	read-create	System Timing Switch on shelf level.
U32 tnShelfCalculatedLoadAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.37	Unsigned32	read-only	This attribute shall be calculated by adding the pre-defined maximum power consumption of each plugged in or pre-provisioned card and then dividing the sum by tnShelfVoltageFloor.
U32 tnShelfPowerCapacity	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.38	Unsigned32	read-only	Shelf Power Capacity.
I32 tnShelfRemainingPowerCapacity	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.39	Integer32	read-only	Shelf Remaining Power Capacity.
INT tnShelfLockout	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.40	INTEGER	read-create	FABRIC card lockout status.
T/F tnShelfFilterMonitorStatus	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.41	TruthValue	read-create	Filter maintenance status.
U32 tnShelfFilterInspectionInterval	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.42	Unsigned32	read-create	Filter inspection interval time in weeks.
U32 tnShelfFilterStartDate	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.43	Unsigned32	read-create	Filter inspection start date.
OCT tnShelfAlmProfName	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.44	OCTET STRING	read-create
U32 tnShelfBranchPowerCap1	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.45	Unsigned32	read-create
U32 tnShelfBranchPowerCap2	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.46	Unsigned32	read-create
U32 tnShelfBranchPowerCap3	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.47	Unsigned32	read-create
U32 tnShelfBranchPowerCap4	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.48	Unsigned32	read-create
U32 tnShelfBranchPowerCap5	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.49	Unsigned32	read-create
U32 tnShelfBranchPowerCap6	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.50	Unsigned32	read-create
I32 tnShelfBranchRemainingPwrCap1	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.51	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap2	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.52	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap3	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.53	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap4	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.54	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap5	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.55	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap6	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.56	Integer32	read-create
INT tnShelfFabricEQPStatus	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.57	INTEGER	read-only	Fabric location status.
INT tnShelfFabricActivityState	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.58	INTEGER	read-only	Fabric activity states.
INT tnShelfFabricFailures	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.59	INTEGER	read-only	Fabric failure mode.
INT tnShelfFabricUsage	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.60	INTEGER	read-only	Fabric Usage status.
OCT tnShelfFabricEqpsLEDColor	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.61	OCTET STRING	read-only	The color of the CRU EQPS status LED.
INT tnShelfFabricReadyToProtect	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.62	INTEGER	read-only	Fabric ready to protect status.
TNR tnShelfRackType	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.63	TnRackSize	read-create	Shelf rack size
INT tnShelfInventoryAction	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.64	INTEGER	read-create	Copies the shelf Remote Inventory information from the shelf inventory HW into the database or from database to the shelf inventory HW.
I32 tnShelfTotal	1.3.6.1.4.1.7483.2.2.1.1.2.1.2	Integer32	read-only	The total number of shelves allocated on a 1696R/1830 ROADM NE.
tnShelfRiDataTable	1.3.6.1.4.1.7483.2.2.1.1.2.1.3		not-accessible	Applicable to PSS4.
tnShelfRiDataEntry	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1		not-accessible
STR tnShelfRiCompanyID	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.1	SnmpAdminString	read-only
STR tnShelfRiMnemonic	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.2	SnmpAdminString	read-only
TRO tnShelfRiCLEI	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.3	TropicCardCLEI	read-only
TRO tnShelfRiManufacturingPartNumber	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.4	TropicCardManufacturingPartNumber	read-only
STR tnShelfRiSWPartNum	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.5	SnmpAdminString	read-only
STR tnShelfRiFactoryID	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.6	SnmpAdminString	read-only
TRO tnShelfRiSerialNumber	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.7	TropicCardSerialNumber	read-only
STR tnShelfRiDate	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.8	SnmpAdminString	read-only
STR tnShelfRiExtraData	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.9	SnmpAdminString	read-only

AluWdmExpectedAmpPF (2)
ALU tnShelfExpectedPfa	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.20	AluWdmExpectedAmpPF	read-create	The expectedamps for PF card located in slot 2 when the expectedamps is mix.
ALU tnShelfExpectedPfb	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.21	AluWdmExpectedAmpPF	read-create	The expectedamps for PF card located in slot 3 when the expectedamps is mix.
AluWdmWtClkValues (1)
ALU tnShelfClkSwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.29	AluWdmWtClkValues	read-create	Clock Switch on shelf level.
INTEGER (12)
INT tnShelfExpectedAmps	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.11	INTEGER	read-create	This attribute is associated with shelf pre-provisioning, and defines a single value for the shelf which applies to both PSFs. The value can be edited by the network manager. A mismatch alarm will be generated against any PSF that does not agree with the value of this attribute. An excess load alarm will be raised against any inserted circuit pack which cannot be provided power without exceeding the actual or provisioned shelf amperage (whichever is less). Auto means when the shelf is equipped, the EC reads the id of the two power filters and takes the value (they should both be the same, but just in case) of the smaller one as the shelf power capacity. Current configurable values: PSS4: 3.7, 8.5, 20.6. PSS32: auto, 20, 30, 50, 60, 70. PSS16: auto, 20, 35. PSS36: If only PFC power filter is supported, this attribute is read-only, with the value 150. If both PFC and PFB50 power filters are supported, this attribute is provisionable with values auto, 100, 150. PSS64: 275.
INT tnShelfExpectedVolts	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.25	INTEGER	read-create	Nominal voltage for the shelf. v48 - The input supply voltage is nominally -48 V dc. v60 - The input supply voltage is nominally -60 V dc. This has the effect of setting the voltage alarms to the ends of the standard operating range for the specified input supply voltage.
INT tnShelfExpectedVoltsAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.30	INTEGER	read-create	Nominal AC voltage for the shelf. v110 - The input supply voltage is nominally -110 V ac. v220 - The input supply voltage is nominally -220 V ac. This has the effect of setting the voltage alarms to the ends of the standard operating range for the specified input supply voltage.
INT tnShelfFabricActivityState	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.58	INTEGER	read-only	Fabric activity states.
INT tnShelfFabricEQPStatus	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.57	INTEGER	read-only	Fabric location status.
INT tnShelfFabricFailures	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.59	INTEGER	read-only	Fabric failure mode.
INT tnShelfFabricReadyToProtect	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.62	INTEGER	read-only	Fabric ready to protect status.
INT tnShelfFabricUsage	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.60	INTEGER	read-only	Fabric Usage status.
INT tnShelfInventoryAction	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.64	INTEGER	read-create	Copies the shelf Remote Inventory information from the shelf inventory HW into the database or from database to the shelf inventory HW.
INT tnShelfLockout	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.40	INTEGER	read-create	FABRIC card lockout status.
INT tnShelfMatrixSize	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.26	INTEGER	read-create	The matrix size of the shelf. notApplicable - Not applicable to this shelf. ms1dot2T - 1.2T shelf. ms1dot9T - 1.9T shelf. Sets are not supported.
INT tnShelfTimingSwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.36	INTEGER	read-create	System Timing Switch on shelf level.
Integer32 (9)
I32 tnShelfBranchRemainingPwrCap1	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.51	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap2	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.52	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap3	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.53	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap4	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.54	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap5	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.55	Integer32	read-create
I32 tnShelfBranchRemainingPwrCap6	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.56	Integer32	read-create
I32 tnShelfRemainingPowerCapacity	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.39	Integer32	read-only	Shelf Remaining Power Capacity.
I32 tnShelfSerialNum	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.4	Integer32	read-create	Shelf serial number. Applicable to the 1696R.
I32 tnShelfTotal	1.3.6.1.4.1.7483.2.2.1.1.2.1.2	Integer32	read-only	The total number of shelves allocated on a 1696R/1830 ROADM NE.
OBJECT IDENTIFIER (2)
OID tnShelfPresentType	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.6	OBJECT IDENTIFIER	read-only	Actual shelf present.
OID tnShelfProgrammedType	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.5	OBJECT IDENTIFIER	read-create	Type of shelf provisioned.
OCTET STRING (2)
OCT tnShelfAlmProfName	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.44	OCTET STRING	read-create
OCT tnShelfFabricEqpsLEDColor	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.61	OCTET STRING	read-only	The color of the CRU EQPS status LED.
SnmpAdminString (9)
STR tnShelfDescr	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.3	SnmpAdminString	read-create	Shelf description.
STR tnShelfName	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.2	SnmpAdminString	read-create	Shelf name (an abbreviated description).
STR tnShelfRiCompanyID	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.1	SnmpAdminString	read-only
STR tnShelfRiDate	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.8	SnmpAdminString	read-only
STR tnShelfRiExtraData	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.9	SnmpAdminString	read-only
STR tnShelfRiFactoryID	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.6	SnmpAdminString	read-only
STR tnShelfRiMnemonic	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.2	SnmpAdminString	read-only
STR tnShelfRiSWPartNum	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.5	SnmpAdminString	read-only
STR tnShelfSerialNumber	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.12	SnmpAdminString	read-create	Applicable to the 1830 PSS-32 DCM, SFD44 and ITLB shelves.
TnCommand (3)
TNC tnShelfActivityMt0cSwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.18	TnCommand	read-create	Perform an activity switch on the MT0C. When read, this object returns noCmd.
TNC tnShelfActivitySwitch	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.7	TnCommand	read-create	Perform an activity switch on this shelf. When read, this object returns noCmd.
TNC tnShelfLampTest	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.8	TnCommand	read-create	Perform a lamp test on the shelf. When read, this object returns noCmd.
TnRackSize (1)
TNR tnShelfRackType	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.63	TnRackSize	read-create	Shelf rack size
TropicCardCLEI (1)
TRO tnShelfRiCLEI	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.3	TropicCardCLEI	read-only
TropicCardManufacturingPartNumber (1)
TRO tnShelfRiManufacturingPartNumber	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.4	TropicCardManufacturingPartNumber	read-only
TropicCardSerialNumber (1)
TRO tnShelfRiSerialNumber	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1.7	TropicCardSerialNumber	read-only
TropicLEDColorType (1)
TRO tnShelfStatusLEDColor	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.15	TropicLEDColorType	read-only	The color of the shelf status LED.
TropicLEDStateType (1)
TRO tnShelfStatusLEDState	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.16	TropicLEDStateType	read-only	The state of the shelf status LED.
TropicShelfIndexType (1)
TRO tnShelfIndex	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.1	TropicShelfIndexType	not-accessible
TruthValue (6)
T/F tnShelfAINS	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.13	TruthValue	read-create	Applicable to the 1830 PSS-32.
T/F tnShelfFilterMonitorStatus	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.41	TruthValue	read-create	Filter maintenance status.
T/F tnShelfIsUnmanaged	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.10	TruthValue	read-create	Indicates a shelf is not being managed. This is set to true for shelves that have no managed inventory.
T/F tnShelfMateCCReadyToProtect	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.9	TruthValue	read-only
T/F tnShelfMateMt0cReadyToProtect	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.19	TruthValue	read-only
T/F tnShelfWTMode	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.17	TruthValue	read-create	The Shelf WT Mode.
Unsigned32 (20)
U32 tnShelfBranchPowerCap1	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.45	Unsigned32	read-create
U32 tnShelfBranchPowerCap2	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.46	Unsigned32	read-create
U32 tnShelfBranchPowerCap3	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.47	Unsigned32	read-create
U32 tnShelfBranchPowerCap4	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.48	Unsigned32	read-create
U32 tnShelfBranchPowerCap5	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.49	Unsigned32	read-create
U32 tnShelfBranchPowerCap6	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.50	Unsigned32	read-create
U32 tnShelfCalculatedLoad	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.28	Unsigned32	read-only	This attribute shall be calculated by adding the pre-defined maximum power consumption of each plugged in or pre-provisioned card and then dividing the sum by tnShelfVoltageFloor.
U32 tnShelfCalculatedLoadAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.37	Unsigned32	read-only	This attribute shall be calculated by adding the pre-defined maximum power consumption of each plugged in or pre-provisioned card and then dividing the sum by tnShelfVoltageFloor.
U32 tnShelfExternalAcPower	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.34	Unsigned32	read-create	The power of the external AC power box.
U32 tnShelfFilterInspectionInterval	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.42	Unsigned32	read-create	Filter inspection interval time in weeks.
U32 tnShelfFilterStartDate	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.43	Unsigned32	read-create	Filter inspection start date.
U32 tnShelfHighVoltageThreshold	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.22	Unsigned32	read-create	Shelf high voltage threshold. Default is depending on value of tnShelfExpectedVolts: v48 - 5700 v60 - 7200. Current configurable values: 0 to 8500, in increments of 50.
U32 tnShelfHighVoltageThresholdAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.31	Unsigned32	read-create	Shelf high ac voltage threshold. Default is depending on value of tnShelfExpectedVoltsAC: v110 - 12000. v220 - 24000. Current configurable values: 9000 to 26400, in increments of 50.
U32 tnShelfLoadWarningThreshold	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.35	Unsigned32	read-create	Shelf load warning threshold.
U32 tnShelfLowVoltageThreshold	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.23	Unsigned32	read-create	Shelf low voltage threshold. Default is depending on value of tnShelfExpectedVolts: v48 - 4050 v60 - 5000. Current configurable values: 0 to 8500, in increments of 50.
U32 tnShelfLowVoltageThresholdAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.32	Unsigned32	read-create	Shelf low ac voltage threshold. Default is depending on value of tnShelfExpectedVoltsAC: v110 - 10000. v220 - 20000. Current configurable values: 9000 to 26400, in increments of 50.
U32 tnShelfPowerCapacity	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.38	Unsigned32	read-only	Shelf Power Capacity.
U32 tnShelfVoltageFloor	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.27	Unsigned32	read-create	Shelf voltage floor. Current configurable range: 3900 to 7200.
U32 tnShelfVoltageFloorAC	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.33	Unsigned32	read-create	Shelf ac voltage floor. Current configurable range: 9000 to 26400.
U32 tnShelfVoltageThresholdTol	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1.24	Unsigned32	read-create	Shelf voltage threshold tolerance. Current configurable values: 100 to 500, in increments of 100.
No type (14)
tnShelfBasics	1.3.6.1.4.1.7483.2.2.1.1.2.1
tnShelfCompliance	1.3.6.1.4.1.7483.2.2.1.1.1.2.1
tnShelfCompliances	1.3.6.1.4.1.7483.2.2.1.1.1.2
tnShelfConf	1.3.6.1.4.1.7483.2.2.1.1.1
tnShelfEntry	1.3.6.1.4.1.7483.2.2.1.1.2.1.1.1		not-accessible
tnShelfGroup	1.3.6.1.4.1.7483.2.2.1.1.1.1.1
tnShelfGroups	1.3.6.1.4.1.7483.2.2.1.1.1.1
tnShelfMibModule	1.3.6.1.4.1.7483.1.1.2.2.1.1			The shelf MIB for Nokia network elements.
tnShelfObjs	1.3.6.1.4.1.7483.2.2.1.1.2
tnShelfRiDataEntry	1.3.6.1.4.1.7483.2.2.1.1.2.1.3.1		not-accessible
tnShelfRiDataGroup	1.3.6.1.4.1.7483.2.2.1.1.1.1.3
tnShelfRiDataTable	1.3.6.1.4.1.7483.2.2.1.1.2.1.3		not-accessible	Applicable to PSS4.
tnShelfScalarsGroup	1.3.6.1.4.1.7483.2.2.1.1.1.1.2
tnShelfTable	1.3.6.1.4.1.7483.2.2.1.1.2.1.1		not-accessible

FAQ

What hardware conditions does TROPIC-SHELF-MIB monitor on a Nokia Tropic optical transport shelf?
It covers chassis-level environmental and power status for the shelf that houses the line cards, alongside shelf type/identity and configuration parameters — exactly the data needed to catch a failing power feed or an overheating shelf before it takes down every card it houses.

How does TROPIC-SHELF-MIB relate to the other MIBs used on a Tropic network element?
It works alongside TROPIC-CARD-MIB and TROPIC-OPTICALCARD-MIB, which describe the individual cards the shelf contains, plus the Tropic notification MIBs that alarm on shelf-level fault conditions — so the shelf MIB gives the chassis-wide power/environmental picture while the card MIBs give per-card detail.

RFC description

Manages Nokia Tropic shelf hardware inventory, power, and environmental status for optical transport.

Start monitoring Nokia Tropic WDM optical transport shelf/chassis (power/environmental status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TROPIC-SHELF-MIB

This MIB depends on

Related MIBs

What Is TROPIC-SHELF-MIB?

Supported Devices

Monitoring Examples

FAQ

RFC description