TROPIC-GMPLS-NE-MIB

All MIBs › TROPIC-GMPLS-NE-MIB

Organization: Nokia

Last Updated: 2013-06-27

Category: Nokia Optical Transport

Description: Manages Nokia Tropic GMPLS network element configuration and control plane connectivity.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TROPIC-GMPLS-NE-MIB?

TROPIC-GMPLS-NE-MIB is a vendor-specific module used by Nokia (originally Tropic Networks, an optical transport vendor later acquired by Nokia/Alcatel-Lucent) to define network element types for Generalized Multi-Protocol Label Switching (GMPLS) control-plane management on optical transport equipment. It exposes configuration and status data related to GMPLS network element identity and control-plane connectivity, supporting the signaling and routing that establishes optical/TDM label-switched paths across the network. In terms of hardware/software status, this MIB is oriented toward control-plane operational state, such as whether a network element's GMPLS control channel is up, rather than physical sensors, letting an operator confirm that a node is correctly participating in the GMPLS control plane and detect a node that has dropped out of signaling. It builds on general GMPLS/MPLS-TE standards concepts (control plane, TE-links) as implemented in Tropic's proprietary type definitions. It is typically deployed on Tropic/Nokia optical transport network elements in carrier and metro optical networks using GMPLS for dynamic circuit provisioning. Network engineers evaluating or troubleshooting this functionality can download the TROPIC-GMPLS-NE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-GMPLS-NE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia (formerly Tropic Networks) optical transport network element
GMPLS-enabled optical/TDM switching node

Monitoring Examples

An operator would monitor GMPLS network-element type and identity objects defined by this MIB to confirm a given optical node is correctly registered in the control plane, and would cross-reference this with TE-link or control-channel status objects to detect signaling adjacency loss. A network element reporting an unexpected or null GMPLS NE type could indicate a misconfigured or newly provisioned node that has not yet joined the control-plane topology. No sample objects were provided in the source data, so this description is grounded in the module's stated purpose.

What Can Be Monitored

GMPLS network element identity/type
control-plane participation status
signaling/control channel state

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv4
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus

From TROPIC-GLOBAL-REG

tnGmplsMIBModules	OBJECT-IDENTITY
tnGmplsObjs	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
tnGmplsNeMibModule	1.3.6.1.4.1.7483.1.1.2.6.4			GMPLS Network Element MIB types.
tnGmplsNeMIB	1.3.6.1.4.1.7483.2.1.10.1.4
tnGmplsNeObjs	1.3.6.1.4.1.7483.2.1.10.1.4.1
I32 tnGmplsNeAttributeTotal	1.3.6.1.4.1.7483.2.1.10.1.4.1.1	Integer32	read-only	Total number of attributes in this MIB file.
tnGmplsNeTable	1.3.6.1.4.1.7483.2.1.10.1.4.1.2		not-accessible	The GMPLS Network Element Table.
tnGmplsNeEntry	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1		not-accessible	An entry in this table represents an GMPLS Node. There is only one entry in this table because only one GMPLS instance per NE allowed. The creation of a second entry shall be denied.
U32 tnGmplsNeIndex	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.1	Unsigned32	not-accessible	Uniquely identifies this row. There is only one entry in this table.
ADR tnGmplsNeCPNodeId	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.2	InetAddressIPv4	read-create	CP Node ID. Uniquely identifies a row.
IPt tnGmplsNeNodeAddrType	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.3	InetAddressType	read-only	Only IPv4 is supported.
IP tnGmplsNeNodeAddr	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.4	InetAddress	read-only	Node Addr in IPv4.
IPt tnGmplsNeNotifyAddrType	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.5	InetAddressType	read-only	Only IPv4 is supported.
IP tnGmplsNeNotifyAddr	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.6	InetAddress	read-only	RSVP Notify address in IPv4.
STR tnGmplsNeNodeName	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.7	DisplayString	read-create	User friendly name
ADR tnGmplsNeDcnOspfArea	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.8	InetAddressIPv4	read-create	Area Id for the DCN OSPF. Can only be set if AdminState is down. Else the Agent will deny the modification.
INT tnGmplsNeRestorationMode	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.9	INTEGER	read-create	Manual restoration for maintenance.
INT tnGmplsNeAutomode	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.10	INTEGER	read-create	Autodiscovery and Management Mode for NMS interworking.
STR tnGmplsNeActiveNWVersion	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.11	DisplayString	read-create	Current active SW Release number in x.y, with x = major release, y = sub release. A change is possible at max to the Installed NWVersion. All GMPLS Nodes in the network must support this release.
STR tnGmplsNeInstalledNWVersion	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.12	DisplayString	read-only	Current installed SW Release number in x.y, with x = major release, y = sub release.
INT tnGmplsNeAdminStatus	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.13	INTEGER	read-create	Administrative state. Only transition from down to up allowed.
INT tnGmplsNeOperationalState	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.14	INTEGER	read-only	Operational state of the node.
IPt tnGmplsNeColocatedNodeAddrType	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.15	InetAddressType	read-create	IP addr type of GMPLS of the colocated WDM compound. Currently on IPv4 is supported.
IP tnGmplsNeColocatedNode	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.16	InetAddress	read-create	IP addr of GMPLS of the colocated WDM compound. This is empty or 0.0.0.0 if no colocated node exists
ROW tnGmplsNeRowStatus	1.3.6.1.4.1.7483.2.1.10.1.4.1.2.1.17	RowStatus	read-create	This variable is used to modify a row in this table. Supported values for this table are: active => activate new node config notInService => configuration not active notReady => mandatory parameters missing Creation or deletion of row entries is not allowed.
tnGmplsNeSubnodeTable	1.3.6.1.4.1.7483.2.1.10.1.4.1.3		not-accessible	The GMPLS Network Element Subnode Table.
tnGmplsNeSubnodeEntry	1.3.6.1.4.1.7483.2.1.10.1.4.1.3.1		not-accessible	An entry in this table represents an GMPLS Subnode (logical node).
U32 tnGmplsNeSubnodeIndex	1.3.6.1.4.1.7483.2.1.10.1.4.1.3.1.1	Unsigned32	not-accessible	Uniquely identifies this row. Refers to SubNode IFIndex at GMPLS CLI.
U32 tnGmplsNeSubnodeId	1.3.6.1.4.1.7483.2.1.10.1.4.1.3.1.2	Unsigned32	read-create	Uniquely identifies this row. Refers to localDPNodeId at CLI. Only modifiable while AdminStatus is down.
INT tnGmplsNeSubnodeAdminStatus	1.3.6.1.4.1.7483.2.1.10.1.4.1.3.1.3	INTEGER	read-create	Administrative state. Only transition from down to up allowed.
ROW tnGmplsNeSubnodeRowStatus	1.3.6.1.4.1.7483.2.1.10.1.4.1.3.1.4	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table. Supported values for this table are: active => activate new node config notInService => configuration not active notReady => mandatory parameters missing createAndGo => create and activate a new entry destroy => delete a entry.
tnGmplsNeConf	1.3.6.1.4.1.7483.2.1.10.1.4.3
tnGmplsNeGroups	1.3.6.1.4.1.7483.2.1.10.1.4.3.1
tnGmplsNeObjsGroup	1.3.6.1.4.1.7483.2.1.10.1.4.3.1.1
tnGmplsNeGroup	1.3.6.1.4.1.7483.2.1.10.1.4.3.1.2			The GMPLS NE group of objects providing for management of GMPLS NE entities.
tnGmplsNeSubnodeGroup	1.3.6.1.4.1.7483.2.1.10.1.4.3.1.3			The GMPLS NE subnode group of objects providing for management of GMPLS NE entities.
tnGmplsNeCompliances	1.3.6.1.4.1.7483.2.1.10.1.4.3.2
tnGmplsNeCompliance	1.3.6.1.4.1.7483.2.1.10.1.4.3.2.1			The compliance statement for SNMPv2 entities which implement GMPLS NE.

RFC description

Manages GMPLS network element objects and attributes for Nokia optical/transport systems.

Start monitoring Nokia optical transport network elements with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TROPIC-GMPLS-NE-MIB

What Is TROPIC-GMPLS-NE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description