TRAPEZE-NETWORKS-AP-STATUS-MIB :: trpzApStatRadioRateOpStatsPhyErr

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TRAPEZE-NETWORKS-AP-STATUS-MIB › trpzApStatRadioRateOpStatsPhyErr

trpzApStatRadioRateOpStatsPhyErr

Module: TRAPEZE-NETWORKS-AP-STATUS-MIB

OID (symbolic): TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsPhyErr

OID (numeric): 1.3.6.1.4.1.14525.4.5.1.1.12.1.12

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: Number of Physical Errors occurred.

What is trpzApStatRadioRateOpStatsPhyErr?

Counts physical-layer errors detected by this radio's receiver, broken out for one specific legacy data transmission rate on this radio (the rate itself is the trpzApStatRadioRateOpStatsRate index column), letting admins see which rate is actually carrying the traffic. A rising count here points to RF-layer problems, such as interference, low signal, or a failing radio, rather than anything happening at the protocol level.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14525.4.5.1.1.12.1.12
snmpwalk -v2c -c public <target> TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsPhyErr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.14525.4.5.1.1.12.1.12.1
snmpget -v2c -c public <target> TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsPhyErr.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> trpzApStatRadioRateOpStatsPhyErr.1

Start monitoring Trapeze Networks (Juniper) thin access point / Access Controller (AP up/down operational-state status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsPhyErr OID value, configure state conditions and alerts, and monitor any Trapeze Networks (Juniper) thin access point / Access Controller (AP up/down operational-state status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.14525trpzRootMibTRAPEZE-NETWORKS-ROOT-MIB
1.3.6.1.4.1.14525.4trpzMibsTRAPEZE-NETWORKS-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.14525.4.5trpzApStatusMibTRAPEZE-NETWORKS-AP-STATUS-MIB
1.3.6.1.4.1.14525.4.5.1trpzApStatusObjectsTRAPEZE-NETWORKS-AP-STATUS-MIB
1.3.6.1.4.1.14525.4.5.1.1trpzApStatDataObjectsTRAPEZE-NETWORKS-AP-STATUS-MIB
1.3.6.1.4.1.14525.4.5.1.1.12trpzApStatRadioRateOpStatisticsTableTRAPEZE-NETWORKS-AP-STATUS-MIB
1.3.6.1.4.1.14525.4.5.1.1.12.1trpzApStatRadioRateOpStatisticsEntryTRAPEZE-NETWORKS-AP-STATUS-MIB
1.3.6.1.4.1.14525.4.5.1.1.12.1.12trpzApStatRadioRateOpStatsPhyErrTRAPEZE-NETWORKS-AP-STATUS-MIB