TIMETRA-SAS-OAM-TEST-MIB

All MIBs › TIMETRA-SAS-OAM-TEST-MIB

Organization: Alcatel-Lucent

Last Updated: 2011-02-01

Description: TIMETRA-SAS-OAM-TEST-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-SAS-OAM-TEST-MIB?

TIMETRA-SAS-OAM-TEST-MIB is an Alcatel-Lucent (Nokia) SR OS MIB for the SAS (Service Access Switch) product family, used to configure and provision OAM throughput/service-activation test profiles. It exposes a table of test-header profile objects covering committed information rate (CIR) adaptation, configured and operational CIR, test duration (hours/minutes/seconds), and frame size, alongside notification and conformance groups. This is software/service-level performance monitoring aimed at validating bandwidth SLAs: comparing the operational CIR achieved during a test against the configured target CIR reveals whether a service link is delivering its committed bandwidth, which is central to service-activation testing on access switches. It is closely related to, and part of the same Alcatel-Lucent Timetra family as, TIMETRA-OAM-TEST-MIB, sharing similar test-control conventions and depending on the vendor's broader service/SDP model. It is deployed on Alcatel-Lucent (Nokia) SAS 7210/7250-series service access switches in metro Ethernet and service-provider access networks. Engineers can download the TIMETRA-SAS-OAM-TEST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-SAS-OAM-TEST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent (Nokia) SAS 7210/7250-series service access switches

Monitoring Examples

An administrator would configure a tmnxTestHdProfTable/tmnxTestHdProfEntry row -- setting tmnxTestHdProfCIR, tmnxTestHdProfCIRAdaptation, tmnxTestHdProfFrameSize, and tmnxTestHdProfDurHr/Min/Sec -- to define a throughput test profile, then poll tmnxTestHdProfOperCIR to see the actual achieved rate during the test. An tmnxTestHdProfOperCIR that falls short of the configured tmnxTestHdProfCIR would reveal that the service link is under-provisioned or experiencing congestion relative to its committed bandwidth.

What Can Be Monitored

configured vs. operational committed information rate (CIR)
CIR adaptation setting
test duration (hours/minutes/seconds)
test frame size
test profile row status

Imported Objects

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv6
InetAddressPrefixLength
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From TIMETRA-SAP-MIB

sapEncapValue	OBJECT-TYPE
sapPortId	OBJECT-TYPE

From TIMETRA-SAS-GLOBAL-MIB

timetraSASConfs	OBJECT-IDENTITY
timetraSASModules	OBJECT-IDENTITY
timetraSASNotifyPrefix	OBJECT-IDENTITY
timetraSASObjs	OBJECT-IDENTITY

From TIMETRA-SAS-QOS-MIB

TAdaptationRule

From TIMETRA-SERV-MIB

svcId

OBJECT-TYPE

From TIMETRA-TC-MIB

Dot1PPriority
IpAddressPrefixLength
SdpBindId
TDSCPNameOrEmpty
TFCName
TItemDescription
TLNamedItemOrEmpty
TNamedItem
TNamedItemOrEmpty
TPolicyStatementNameOrEmpty
TProfile
TmnxAdminState
TmnxBgpRouteTarget
TmnxEncapVal
TmnxPortID
TmnxPwGlobalIdOrZero
TmnxServId
TmnxSpokeSdpIdOrZero
TmnxStrSapId
TmnxTunnelID
TmnxTunnelType
TmnxVPNRouteDistinguisher
TmnxVRtrID
TmnxVcId
TmnxVcIdOrNone
TmnxVcType

OIDs

OID symbolic	OID numeric	Type	Access	Description
timetraSASOamTestMIBModule	1.3.6.1.4.1.6527.6.2.1.1.18			This document is the SNMP MIB module to manage and provision the Alcatel-Lucent SROS OAM tests. Copyright 2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxSASOamTestConformance	1.3.6.1.4.1.6527.6.2.2.1.17
tmnxTestHdProfConformance	1.3.6.1.4.1.6527.6.2.2.1.17.1
tmnxTestHdObjsGroups	1.3.6.1.4.1.6527.6.2.2.1.17.1.1
tmnxTestHdObjsV5v0Group	1.3.6.1.4.1.6527.6.2.2.1.17.1.1.1			The group of Test Head objects supported in 7210 5.0 release
tmnxTestHdNotifyV5v0Group	1.3.6.1.4.1.6527.6.2.2.1.17.1.1.2			The group of notifications supported in 7210 5.0 release
tmnxSASOamTestObjs	1.3.6.1.4.1.6527.6.2.2.2.17
tmnxTestHdProfObjects	1.3.6.1.4.1.6527.6.2.2.2.17.1
tmnxTestHdProfTable	1.3.6.1.4.1.6527.6.2.2.2.17.1.1		not-accessible
tmnxTestHdProfEntry	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1		not-accessible
INT tmnxTestHdProfIndex	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.1	INTEGER	accessible-for-notify	tmnxTestHdProfIndex profile index for this entry
ROW tmnxTestHdProfRowStatus	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.2	RowStatus	read-create	RowStatus for this entry
TIT tmnxTestHdProfDescription	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.3	TItemDescription	read-create	user description for this profile
TAD tmnxTestHdProfCIRAdaptation	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.4	TAdaptationRule	read-create	cir rule to be used in the test head test
TTE tmnxTestHdProfOperCIR	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.5	TTestHdCIRRate	read-only	oper cir used in the payload
TTE tmnxTestHdProfCIR	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.6	TTestHdCIRRate	read-create	cir to be used in the payload, this object is supported for backward compatibility of 7210 devices using 5.0R4, tmnxTestHdProfOperCIR and tmnxTestHdProfAdminCIR to be used in 6.0 nodes
I32 tmnxTestHdProfDurHr	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.8	Integer32	read-create	tmnxTestHdProfDurHr is the number of hours the test head test to be run
I32 tmnxTestHdProfDurMin	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.9	Integer32	read-create	tmnxTestHdProfDurMin is the number of minutes the test head test to be run
I32 tmnxTestHdProfDurSec	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.10	Integer32	read-create	tmnxTestHdProfDurSec is the number of seconds the test head test to be run
INT tmnxTestHdProfFrameSize	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.11	INTEGER	read-create	tmnxTestHdProfFrameSize is the frame size to be used in frame payload
T/F tmnxTestHdProfTrapEnable	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.13	TruthValue	read-create	tmnxTestHdProfTrapEnable when set to true tmnxOamTestHeadTestCompleted trap will be sent when the test run completes.
TIM tmnxTestHdLastChanged	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.14	TimeStamp	read-only	The value tmnxTestHdLastChanged indicates the system uptime when an entry in tmnxTestHdProfTable was last changed.
TTE tmnxTestHdProfAdminCIR	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.15	TTestHdCIRRate	read-create	admin cir to be used in the payload
TTE tmnxTestHdProfAdminPIR	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.16	TTestHdPIRRate	read-create	admin pir to be used in the payload
TTE tmnxTestHdProfOperPIR	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.17	TTestHdPIRRate	read-only	oper pir used in the payload
DOT tmnxTestHdProfDot1pIn	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.18	Dot1PPriority	read-create	dot1p-in value to for this profile.
DOT tmnxTestHdProfDot1pOut	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.19	Dot1PPriority	read-create	dot1p-out value to for this profile.
OCT tmnxTestHdProfActiveTests	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.20	OCTET STRING	read-only	Active tests that are using this profile
OCT tmnxTestHdProfCompetedTests	1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.21	OCTET STRING	read-only	Completed tests that have used this profile
tmnxTestHdPayLdTable	1.3.6.1.4.1.6527.6.2.2.2.17.1.2		not-accessible	This table maintains the mapping of a particular forwarding class traffic into the specified queue.
tmnxTestHdPayLdEntry	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1		not-accessible	Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
INT tmnxTestHdPayLdIndex	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.1	INTEGER	accessible-for-notify	tmnxTestHdPayLdIndex is the payload index
ROW tmnxTestHdPayLdRowStatus	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.2	RowStatus	read-create	Row Status for this entry.
TIT tmnxTestHdPayLdDesc	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.3	TItemDescription	read-create	tmnxTestHdPayLdDesc is the textual description entered by user for this payload
OCT tmnxTestHdPayLddataPattrn	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.4	OCTET STRING	read-create	tmnxTestHdPayLddataPattrn is string of characters 0-9,a-f It is used to fill up the data field of the payload of the frame, repeating it in the payload field as many time as need to fill up the entire length of the payload
IP tmnxTestHdPayLdSrcIpv4Addr	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.5	IpAddress	read-create	tmnxTestHdPayLdSrcIpv4Addr is the source ip address to be used in frame payload
IP tmnxTestHdPayLdDstIpv4Addr	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.6	IpAddress	read-create	tmnxTestHdPayLdDstIpv4Addr is the destination ip address to be used in frame payload
TDS tmnxTestHdPayLdDSCP	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.7	TDSCPNameOrEmpty	read-create	tmnxTestHdPayLdDSCP is the dscp value to be used in frame payload
INT tmnxTestHdPayLdIpProto	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.8	INTEGER	read-create	tmnxTestHdPayLdIpProto is the ip protocal value to be used in frame payload
INT tmnxTestHdPayLdIpTos	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.9	INTEGER	read-create	tmnxTestHdPayLdIpTos is the ip type of service value to be used in frame payload
INT tmnxTestHdPayLdIpTTL	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.10	INTEGER	read-create	tmnxTestHdPayLdIpTTL is the ip time to live value to be used in frame payload
MAC tmnxTestHdPayLdSrcMac	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.11	MacAddress	read-create	Source MAC to be used in the frame payload.
MAC tmnxTestHdPayLdDstMac	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.12	MacAddress	read-create	Destination MAC to be used in the frame payload.
INT tmnxTestHdPayLdSrcPort	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.13	INTEGER	read-create	Source Port to be used in the frame payload.
INT tmnxTestHdPayLdDstPort	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.14	INTEGER	read-create	Destination Port to be used in the frame payload.
TIM tmnxTestHdPayLdLastChanged	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.15	TimeStamp	read-only	The value tmnxTestHdPayLdLastChanged indicates the system uptime when an entry in tmnxTestHdPayLdTable was last changed.
INT tmnxTestHdPayLdType	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.16	INTEGER	read-create	tmnxTestHdPayLdType indicates the payload type for this frame payload.
I32 tmnxTestHdPayLdVTagOne	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.17	Integer32	read-create	Vlan tag one to be used in payload , if set to -1 packets are sent out without vlan tag
U32 tmnxTestHdPayLdVTagOneTpid	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.18	Unsigned32	read-create	The tmnxTestHdPayLdVTagOneTpid variable indicates the ethertype to be set in the payload.
DOT tmnxTestHdPayLdVTagOneDot1p	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.19	Dot1PPriority	read-create	IEEE 802.1p priority value for this frame payload.
I32 tmnxTestHdPayLdVTagTwo	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.20	Integer32	read-create	Vlan tag two to be used in payload , if set to -1 packets are sent out without vlan tag
U32 tmnxTestHdPayLdVTagTwoTpid	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.21	Unsigned32	read-create	The tmnxTestHdPayLdVTagTwoTpid variable indicates the ethertype to be set in the payload.
DOT tmnxTestHdPayLdVTagTwoDot1p	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.22	Dot1PPriority	read-create	IEEE 802.1p priority value for this frame payload.
U32 tmnxTestHdPayLdEthertype	1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.23	Unsigned32	read-create	The tmnxTestHdPayLdEthertype variable indicates the ethertype to be set in the payload.
tmnxTestHdAccCritTable	1.3.6.1.4.1.6527.6.2.2.2.17.1.3		not-accessible	This table maintains the mapping of a particular forwarding class traffic into the specified queue.
tmnxTestHdAccCritEntry	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1		not-accessible	Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
INT tmnxTestHdAccCritIndex	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.1	INTEGER	accessible-for-notify
ROW tmnxTestHdAccCritRowStatus	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.2	RowStatus	read-create	Row Status for this entry.
INT tmnxTestHdAccCritJittrRiseThres	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.3	INTEGER	read-create	tmnxTestHdAccCritJittrRiseThres is the acceptance criteria jitter rising threshold to be used for test run
INT tmnxTestHdAccCritLatRiseThres	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.4	INTEGER	read-create	tmnxTestHdAccCritLatRiseThres is the acceptance criteria latency rising threshold to be used for test run
INT tmnxTestHdAccCritLossRiseThres	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.5	INTEGER	read-create	tmnxTestHdAccCritLossRiseThres is the acceptance criteria loss rising threshold to be used for test run
TIM tmnxTestHdAccCritLastChanged	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.6	TimeStamp	read-only	The value tmnxTestHdAccCritLastChanged indicates the system uptime when an entry in tmnxTestHdAccCritTable was last changed.
INT tmnxTestHdAccCritLossRiseThresIn	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.7	INTEGER	read-create	tmnxTestHdAccCritLossRiseThresIn is the acceptance criteria loss rising threshold in to be used for test run
INT tmnxTestHdAccCritLossRiseThresOut	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.8	INTEGER	read-create	tmnxTestHdAccCritLossRiseThresOut is the acceptance criteria out loss rising threshold to be used for test run
INT tmnxTestHdAccCritCirThres	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.9	INTEGER	read-create	tmnxTestHdAccCritCirThres is the acceptance criteria cir threshold to be used for test run
INT tmnxTestHdAccCritPirThres	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.10	INTEGER	read-create	tmnxTestHdAccCritPirThres is the acceptance criteria pir threshold to be used for test run
INT tmnxTestHdAccCritLatRiseThresIn	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.11	INTEGER	read-create	tmnxTestHdAccCritLatRiseThresIn is the acceptance criteria latency rising threshold-in to be used for test run
INT tmnxTestHdAccCritLatRiseThresOut	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.12	INTEGER	read-create	tmnxTestHdAccCritLatRiseThresOut is the acceptance criteria latency rising threshold out to be used for test run
INT tmnxTestHdAccCritJittrRiseThresIn	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.13	INTEGER	read-create	tmnxTestHdAccCritJittrRiseThresIn is the acceptance criteria jitter rising threshold-in to be used for test run
INT tmnxTestHdAccCritJittrRiseThresOut	1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.14	INTEGER	read-create	tmnxTestHdAccCritJittrRiseThresOut is the acceptance criteria jitter rising threshold-out to be used for test run
tmnxTestHdSessTable	1.3.6.1.4.1.6527.6.2.2.2.17.1.4		not-accessible	This table maintains the mapping of a particular forwarding class traffic into the specified queue.
tmnxTestHdSessEntry	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1		not-accessible	Information about a particular test head result. Entries are read-only for the user.
STR tmnxTestHdSessOwnerName	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.1	SnmpAdminString	not-accessible	The test name index of this Test head test session.
STR tmnxTestHdSessTestName	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.2	SnmpAdminString	not-accessible	The test name index of this Test head test session.
DAT tmnxTestHdSessStartTime	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.3	DateAndTime	read-only	tmnxTestHdSessStartTime test head start time for this session
DAT tmnxTestHdSessCompletedTime	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.4	DateAndTime	read-only	tmnxTestHdSessCompletedTime is the time stamp at which this test head run session has completed.
INT tmnxTestHdSessTotalTime	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.5	INTEGER	read-only	tmnxTestHdSessTotalTime is the total time since test head test has started
TFC tmnxTestHdSessFc	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.6	TFCName	read-only	tmnxTestHdFc is the fc used in this test head session
T/F tmnxTestHdSessCompleted	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.7	TruthValue	read-only	tmnxTestHdSessCompleted is true if the test is completed else it is false.
T/F tmnxTestHdSessStopped	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.8	TruthValue	read-only	tmnxTestHdStopped is true if the test is stopped midway else it is false.
INT tmnxTestHdSessProfId	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.9	INTEGER	read-only	tmnxTestHdSessProfId is the profile index for this session
INT tmnxTestHdSessPayLdId	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.10	INTEGER	read-only	tmnxTestHdSessPayLdId is the payload index used for this session
INT tmnxTestHdSessAccCritId	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.11	INTEGER	read-only	tmnxTestHdSessAccCritId is the acceptance criteria id used for this test run
TMN tmnxTestHdSessSapPortId	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.12	TmnxPortID	read-only	The sap port id ID used in for this test run.
TMN tmnxTestHdSessSapEncapValue	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.13	TmnxEncapVal	read-only	The sap encap value used in this test run.
C64 tmnxTestHdSessTransCount	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.14	Counter64	read-only	The total number of packets injected
C64 tmnxTestHdSessRecvCount	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.15	Counter64	read-only	The total number of packets received
C64 tmnxTestHdSessMinLatency	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.16	Counter64	read-only	The Latency measured minimum for this test
C64 tmnxTestHdSessMaxLatency	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.17	Counter64	read-only	The Latency measured maximum for this test
C64 tmnxTestHdSessMeasuredLatency	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.18	Counter64	read-only	The Latency measured for this test
INT tmnxTestHdSessMeasuredJitter	1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.19	INTEGER	read-only	The Jitter measured for this test
tmnxTestHdResultsTable	1.3.6.1.4.1.6527.6.2.2.2.17.1.5		not-accessible	This table maintains the mapping of a particular forwarding class traffic into the specified queue.
tmnxTestHdResultsEntry	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1		not-accessible	Information about a particular test head result. Entries are read-only for the user.
STR tmnxTestHdOwnerName	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.1	SnmpAdminString	not-accessible	The owner name index of the Test head test.
STR tmnxTestHdTestName	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.2	SnmpAdminString	not-accessible	The test name index of the Test head test.
INT tmnxTestHdResProfId	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.3	INTEGER	read-only	The Testhead profile Id used for this test
INT tmnxTestHdResProfPayLdId	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.4	INTEGER	read-only	The Testhead profile Pay Load Id used for this test
INT tmnxTestHdResProfAccCritId	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.5	INTEGER	read-only	The Testhead profile Acceptance Criteria Id used for this test
C64 tmnxTestHdResTransCount	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.6	Counter64	read-only	The total number of packets injected
C64 tmnxTestHdResRecvCount	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.7	Counter64	read-only	The total number of packets received
INT tmnxTestHdResMeasuredThruput	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.8	INTEGER	read-only	The throughput measured for this test
INT tmnxTestHdResMeasuredFLR	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.9	INTEGER	read-only	The frame loss ratio measured for this test, if set to -1 tmnxTestHdResMeasuredFLR is not applicable for this test
C64 tmnxTestHdResMeasuredLatency	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.10	Counter64	read-only	The Latency measured for this test
INT tmnxTestHdResLatencyAccptanceResult	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.11	INTEGER	read-only	The Latency Acceptance for this test
INT tmnxTestHdResMeasuredJitter	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.12	INTEGER	read-only	The Jitter measured for this test
INT tmnxTestHdResJitterAccptanceResult	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.13	INTEGER	read-only	The Jitter Acceptance for this test
TMN tmnxTestHdResSapPortId	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.14	TmnxPortID	read-only	The sap port id ID used in for this test run.
TMN tmnxTestHdResSapEncapValue	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.15	TmnxEncapVal	read-only	The sap encap value used in this test run.
INT tmnxTestHdResFLRAccptanceResult	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.16	INTEGER	read-only	The FLR Acceptance for this test
C64 tmnxTestHdResMinLatency	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.17	Counter64	read-only	The Latency measured minimum for this test
C64 tmnxTestHdResMaxLatency	1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.18	Counter64	read-only	The Latency measured maximum for this test
tmnxTestHdProfScalarObjs	1.3.6.1.4.1.6527.6.2.2.2.17.1.6
STR tmnxTestHdName	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.1	SnmpAdminString	read-write	tmnxTestHdName is a mandatory parameter that needs to be set along with tmnxTestHdAdminStatus to start a test head test.
STR tmnxTestHdOwner	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.2	SnmpAdminString	read-write	tmnxTestHdOwner is a mandatory parameter that needs to be set along with tmnxTestHdAdminStatus to start a test head test.
DAT tmnxTestHdStartTime	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.3	DateAndTime	accessible-for-notify	tmnxTestHdStartTime test head start time sent in the trap message
INT tmnxTestHdElapsedTime	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.4	INTEGER	accessible-for-notify	tmnxTestHdElapsedTime is the elapsed time since test head test has started
TFC tmnxTestHdFc	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.5	TFCName	read-write	tmnxTestHdFc is an optional parameter that needs to be set along with tmnxTestHdAdminStatus to start a test head test.If tmnxTestHdFc is not given along with tmnxTestHdAdminStatus default forwarding class 'be' would be used
INT tmnxTestHdAvgLatency	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.6	INTEGER	accessible-for-notify	tmnxTestHdAvgLatency is the measured average latency in the test head run. tmnxTestHdAvgLatency is sent in the trap upon test completion
INT tmnxTestHdFrLossRatio	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.7	INTEGER	accessible-for-notify	tmnxTestHdFrLossRatio is the measured frame loss ratio in the test head run. tmnxTestHdFrLossRatio is sent in the trap upon test completion
INT tmnxTestHdJitter	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.8	INTEGER	accessible-for-notify	tmnxTestHdJitter is the measured jitter in the test head run. tmnxTestHdJitter is sent in the trap upon test completion
INT tmnxTestHdDsiredThrpt	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.9	INTEGER	accessible-for-notify	tmnxTestHdDsiredThrpt is the desired through put in the test head run. tmnxTestHdDsiredThrpt is sent in the trap upon test completion
INT tmnxTestHdAchvdThrpt	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.10	INTEGER	accessible-for-notify	tmnxTestHdAchvdThrpt is the acheived through put in the test head run. tmnxTestHdAchvdThrpt is sent in the trap upon test completion
T/F tmnxTestHdCompleted	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.11	TruthValue	accessible-for-notify	tmnxTestHdCompleted is true if the test is completed else it is false. tmnxTestHdCompleted is sent in the trap upon test completion
T/F tmnxTestHdStopped	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.12	TruthValue	accessible-for-notify	tmnxTestHdStopped is true if the test is stopped midway else it is false. tmnxTestHdStopped is sent in the trap upon test completion
INT tmnxTestHdTestStatus	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.13	INTEGER	accessible-for-notify	tmnxTestHdTestStatus is sent in the trap upon test completion. tmnxTestHdTestStatus is pass if the desired test results are acheived.
DAT tmnxTestHdCompletedTime	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.14	DateAndTime	accessible-for-notify	tmnxTestHdCompletedTime is the time at which test head run has completed. tmnxTestHdCompletedTime is sent in the trap upon test completion.
TMN tmnxTestHdSapPortId	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.15	TmnxPortID	read-write	The Sap Port ID to be used for the test run, it has to be supplied along with tmnxTestHdSapEncapValue when the test is started.
TMN tmnxTestHdSapEncapValue	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.16	TmnxEncapVal	read-write	The Sap Encap value to be used for the test run, it has to be supplied along with tmnxTestHdSapPortId when the test is started.
INT tmnxTestHdAdminStatus	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.17	INTEGER	read-write	Reflects the desired state that a Test Head should be in: enabled(1) - Attempt to activate the test as defined by tmnxTestHdName, tmnxTestHdOwner, tmnxTestHdProfId, tmnxTestHdPayLdId, tmnxTestHdAccCritId, tmnxTestHdSapPortId, tmnxTestHdSapEncapValue, tmnxTestHdFc . disabled(2) - Deactivate the test as defined by this tmnxOamPingCtlEntry. An attempt to set tmnxOamPingCtlAdminStatus to 'enabled' will fail if the parameters required by a particular TestHead test have not been set along with tmnxTestHdAdminStatus Upon completion of a Test head test, he agent will reset the value of this object to 'disabled'. When this object has the value 'enabled' an attempt to modify any of the test parameters will fail with an inconsistentValue error.
INT tmnxTestHdProfId	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.18	INTEGER	read-write	tmnxTestHdProfId is the test head profile to be used for the test run, it has to be supplied along with tmnxTestHdAdminStatus when the test is started. tmnxTestHdProfEntry corresponding to tmnxTestHdProfId should be creted before starting the test.
INT tmnxTestHdAccCritId	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.19	INTEGER	read-write	tmnxTestHdAccCritId is the acceptance criteria to be used for the test run, it is an optional parameter to be supplied along with tmnxTestHdAdminStatus when the test is started. tmnxTestHdAccCritEntry corresponding to tmnxTestHdAccCritId should be creted before starting the test.
INT tmnxTestHdPayLdId	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.20	INTEGER	read-write	tmnxTestHdPayLd is the frame payload to be used for the test run, it is an optional parameter to be supplied along with tmnxTestHdAdminStatus when the test is started. tmnxTestHdPayLdEntry corresponding to tmnxTestHdPayLdIndex should be creted before starting the test.
T/F tmnxTestHdColorAware	1.3.6.1.4.1.6527.6.2.2.2.17.1.6.21	TruthValue	read-write	tmnxTestHdColorAware can be set to true to run when the test is started to run color-aware tests.
tmnxTestHdProfNotifyObjs	1.3.6.1.4.1.6527.6.2.2.2.17.2
tmnxSASOamNotifyPrefix	1.3.6.1.4.1.6527.6.2.2.3.3
tmnxSASOamNotifications	1.3.6.1.4.1.6527.6.2.2.3.3.1
NTF tmnxOamTestHeadTestCompleted	1.3.6.1.4.1.6527.6.2.2.3.3.1.1			Generated at the completion of Test Head completion.

RFC description

Manages and provisions OAM tests for Alcatel-Lucent SROS network elements.

Start monitoring Alcatel-Lucent (Nokia) SAS 7210/7250-series service access switches (OAM throughput/service-activation test status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-SAS-OAM-TEST-MIB

What Is TIMETRA-SAS-OAM-TEST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description