All MIBs › TIMETRA-PCEP-MIB
Organization: Nokia
Last Updated: 2016-01-01
Description: TIMETRA-PCEP-MIB module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TIMETRA-PCEP-MIB?
TIMETRA-PCEP-MIB is a Nokia proprietary SNMP module for SR OS that manages and monitors the Path Computation Element communication Protocol (PCEP), used by routers acting as PCE clients (PCC) to request MPLS-TE/segment-routing path computations from an external Path Computation Element. It exposes PCEP entity configuration such as entity type (PCC/PCE), administrative state, local address, and session-timer parameters (keepalive interval, dead timer). Its main monitoring value is verifying that the PCEP session/entity is administratively and operationally healthy, since a failed or flapping PCEP session prevents dynamic path computation and can stall traffic-engineered LSP setup. It works in conjunction with TIMETRA MPLS/RSVP-TE and traffic-engineering MIBs, as PCEP-computed paths feed those signaling protocols. It is deployed on Nokia SROS routers participating in SDN-controlled or PCE-assisted traffic-engineered networks. Network engineers evaluating or troubleshooting this functionality can download the TIMETRA-PCEP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-PCEP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia SROS routers (7750 SR, 7450 ESS) acting as PCEP client/server
- SDN/PCE-controlled traffic-engineered network nodes
Monitoring Examples
An admin polls tmnxPcepEntityTable/tmnxPcepEntityEntry to check tmnxPcepEntityAdminState and confirm the local PCEP entity (identified by tmnxPcepEntityLocalAddr) is enabled and using the expected tmnxPcepEntityType (PCC or PCE). The tmnxPcepEntityKeepAliveInterval and tmnxPcepEntityDeadTimer values are compared against the peer's configuration to diagnose session flaps caused by timer mismatches. A recent tmnxPcepEntityLastChanged timestamp combined with reported PCEP session drops would point to a configuration change as the likely cause.
What Can Be Monitored
- PCEP entity type (PCC/PCE) and admin state
- local PCEP address configuration
- keepalive interval and dead-timer settings
- PCEP entity last-changed timestamp
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressPrefixLength | |
| InetAddressType | |
| InetPortNumber |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
From TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
From TIMETRA-TC-MIB
| TLNamedItemOrEmpty | |
| TNamedItem | |
| TNamedItemOrEmpty | |
| TmnxAdminState | |
| TmnxOperState |
From TIMETRA-VRTR-MIB
| vRtrID | OBJECT-TYPE |
How to Use in IPNetwork Monitor
Example using tmnxPcepPeerNumPCRptSent OID:
Select a Nokia SROS routers (7750 SR, 7450 ESS) acting as PCEP client/server (PCEP session admin/keepalive status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tmnxPcepPeerNumPCRptSent into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of tmnxPcepPeerNumPCRptSent indicates the number of PCRpt messages sent to this peer. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| timetraPcepMIBModule | 1.3.6.1.4.1.6527.1.1.3.101 | This document is the SNMP MIB module for the Nokia SROS implementation of Path Computation Element communications Protocol (PCEP). Copyright 2003-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| tmnxPcepConformance | 1.3.6.1.4.1.6527.3.1.1.101 | |||
| tmnxPcepCompliances | 1.3.6.1.4.1.6527.3.1.1.101.1 | |||
| tmnxPcepCompliance | 1.3.6.1.4.1.6527.3.1.1.101.1.1 | The compliance statement for management of PCEP features on Nokia SROS series systems release. | ||
| tmnxPcepGroups | 1.3.6.1.4.1.6527.3.1.1.101.2 | |||
| tmnxPcepTableChngdGroup | 1.3.6.1.4.1.6527.3.1.1.101.2.1 | The group of objects supporting PCEP table last changed objects on Nokia SROS series systems release. | ||
| tmnxPcepConfigGroup | 1.3.6.1.4.1.6527.3.1.1.101.2.2 | The group of objects supporting PCEP configuration on Nokia SROS series systems release. | ||
| tmnxPcepPccConfigGroup | 1.3.6.1.4.1.6527.3.1.1.101.2.3 | The group of objects supporting PCEP PCC configuration on Nokia SROS series systems release. | ||
| tmnxPcepPccPeerConfigGroup | 1.3.6.1.4.1.6527.3.1.1.101.2.5 | The group of objects supporting PCEP Peer configuration on Nokia SROS series systems release. | ||
| tmnxPcepPcePeerGroup | 1.3.6.1.4.1.6527.3.1.1.101.2.6 | The group of objects supporting PCEP PCE Peer configuration on Nokia SROS series systems release. | ||
| tmnxPcepPccReqMsgInfoGroup | 1.3.6.1.4.1.6527.3.1.1.101.2.7 | The group of objects supporting PCEP PCC request message (PCReq) information on Nokia SROS series systems release. | ||
| tmnxPcepPccReqPathProfInfoGroup | 1.3.6.1.4.1.6527.3.1.1.101.2.8 | The group of objects supporting PCEP PCC request message (PCReq) information related to path-profile on Nokia SROS series systems release. | ||
| tmnxPcepPccLspUpdInfoGroup | 1.3.6.1.4.1.6527.3.1.1.101.2.9 | The group of objects supporting PCEP PCC Label Switched Path (LSP) update information on Nokia SROS series systems release. | ||
| tmnxPcepPeerStatsGroup | 1.3.6.1.4.1.6527.3.1.1.101.2.10 | The group of objects supporting PCEP Peer Statistics information on Nokia SROS series systems release. | ||
| tmnxPcepObjects | 1.3.6.1.4.1.6527.3.1.2.101 | |||
| tmnxPcepTableChangedObjects | 1.3.6.1.4.1.6527.3.1.2.101.1 | |||
| TIM tmnxPcepEntityTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.101.1.1 | TimeStamp | read-only | The value of tmnxPcepEntityTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tmnxPcepEntityTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TIM tmnxPcepPccEntityTblLastChgd | 1.3.6.1.4.1.6527.3.1.2.101.1.2 | TimeStamp | read-only | The value of tmnxPcepPccEntityTblLastChgd indicates the sysUpTime at the time of the last modification of an entry in the tmnxPcepPccEntityTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TIM tmnxPcepPccPeerTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.101.1.3 | TimeStamp | read-only | The value of tmnxPcepPccPeerTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tmnxPcepPccPeerTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| tmnxPcepConfigObjects | 1.3.6.1.4.1.6527.3.1.2.101.2 | |||
| tmnxPcepPccConfigObjects | 1.3.6.1.4.1.6527.3.1.2.101.2.1 | |||
| tmnxPcepPccEntityTable | 1.3.6.1.4.1.6527.3.1.2.101.2.1.1 | not-accessible | The tmnxPcepPccEntityTable contains information about PCEP Path Computation Client (PCC) entities. Entries, in this table, are created by the system for each row in tmnxPcepEntityTable that have the value of object tmnxPcepEntityType as 'pcc (1)'. | |
| tmnxPcepPccEntityEntry | 1.3.6.1.4.1.6527.3.1.2.101.2.1.1.1 | not-accessible | The value of tmnxPcepPccEntityEntry represents a PCEP PCC entity. Entries in tmnxPcepPccEntityEntry are created when entries in tmnxPcepEntityEntry are created with the value of object tmnxPcepEntityType set to 'pcc (1). | |
| TIM tmnxPcepPccEntityLastChanged | 1.3.6.1.4.1.6527.3.1.2.101.2.1.1.1.1 | TimeStamp | read-only | The value of tmnxPcepPccEntityLastChanged indicates the sysUpTime at the time of the most recent change to this PCC entity row. |
| IPt tmnxPcepPccEntityAddrType | 1.3.6.1.4.1.6527.3.1.2.101.2.1.1.1.2 | InetAddressType | read-only | The value of tmnxPcepPccEntityAddrType indicates the address type of PCEP PCC entity. |
| IP tmnxPcepPccEntityAddr | 1.3.6.1.4.1.6527.3.1.2.101.2.1.1.1.3 | InetAddress | read-only | The value of tmnxPcepPccEntityAddr indicates the Internet address being used by this PCEP PCC entity. If the value of tmnxPcepEntityLocalAddrType is 'unknown', then the value of this object is assigned by the system, otherwise the value of tmnxPcepEntityLocalAddr is copied to this object. |
| T/F tmnxPcepPccEntityReportPathConst | 1.3.6.1.4.1.6527.3.1.2.101.2.1.1.1.4 | TruthValue | read-create | The value of tmnxPcepPccEntityReportPathConst specifies whether this this PCEP PCC entity should report path constraints or not. |
| tmnxPcepPceConfigObjects | 1.3.6.1.4.1.6527.3.1.2.101.2.2 | |||
| tmnxPcepEntityTable | 1.3.6.1.4.1.6527.3.1.2.101.2.3 | not-accessible | The tmnxPcepEntityTable contains information about local Path Computation Element communications Protocol (PCEP) entities. | |
| tmnxPcepEntityEntry | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1 | not-accessible | The value of tmnxPcepEntityEntry represents a local PCEP entity. | |
| U32 tmnxPcepEntityIndex | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.1 | Unsigned32 | not-accessible | The value of tmnxPcepEntityIndex specifies the unique identifier for this PCEP entity. The value of tmnxPcepEntityIndex can only be set to 1, when the value of tmnxPcepEntityType is set to 'pcc (1)'. The value of tmnxPcepEntityIndex can only be set to 2, when the value of tmnxPcepEntityType is set to 'pce (2)'. |
| ROW tmnxPcepEntityRowStatus | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.2 | RowStatus | read-create | The value of tmnxPcepEntityRowStatus controls the creation and deletion of rows in this entity table. |
| TIM tmnxPcepEntityLastChanged | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.3 | TimeStamp | read-only | The value of tmnxPcepEntityLastChanged indicates the sysUpTime at the time of the most recent change to this entity row. |
| INT tmnxPcepEntityType | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.4 | INTEGER | read-create | The value of tmnxPcepEntityType specifies the type of this PCEP entity. It takes one of the following values: - pcc (1) : this entity is a Path Computation Client (PCC) - pce (2) : this entity is a Path Computation Server (PCE). This object can only be set at row creation time and cannot be modified. |
| TMN tmnxPcepEntityAdminState | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.5 | TmnxAdminState | read-create | The value of tmnxPcepEntityAdminState specifies the desired administrative state of this PCEP entity. |
| IPt tmnxPcepEntityLocalAddrType | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.6 | InetAddressType | read-create | The value of tmnxPcepEntityLocalAddrType specifies the address type of this PCEP entity's Internet address. |
| IP tmnxPcepEntityLocalAddr | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.7 | InetAddress | read-create | The value of tmnxPcepEntityLocalAddr specifies the local Internet address of this PCEP entity. |
| U32 tmnxPcepEntityKeepAliveInterval | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.8 | Unsigned32 | read-create | The value of tmnxPcepEntityKeepAliveInterval specifies keep alive interval that this PCEP entity proposes in the initial OPEN message of each session it is involved in. This is the maximum time between two consecutive messages sent to a peer. |
| U32 tmnxPcepEntityDeadTimer | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.9 | Unsigned32 | read-create | The value of tmnxPcepEntityDeadTimer specifies the dead timer interval that this PCEP entity proposes in the initial OPEN message of each session it is involved in. This is the time after which a peer should declare a session down if it does not receive any PCEP messages. |
| U32 tmnxPcepEntityMaxUnknownMsgs | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.10 | Unsigned32 | read-create | The value of tmnxPcepEntityMaxUnknownMsgs specifies the maximum number of unknown messages that any session on this PCEP entity is willing to accept per minute before terminating the session. |
| TMN tmnxPcepEntityCapability | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.11 | TmnxPcepCapabilities | read-only | The value of tmnxPcepEntityCapability indicates the capabilities associated with this PCEP entity. |
| T/F tmnxPcepEntityIsOverloaded | 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.12 | TruthValue | read-only | The value of tmnxPcepEntityIsOverloaded indicates whether this PCEP entity is overloaded with the processing of existing requests and is unable to handle new requests leading to unacceptable response times. |
| tmnxPcepPccPeerTable | 1.3.6.1.4.1.6527.3.1.2.101.2.4 | not-accessible | The tmnxPcepPccPeerTable contains information about peers known by the PCEP entity. | |
| tmnxPcepPccPeerEntry | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1 | not-accessible | The value of tmnxPcepPccPeerEntry represents information about a single peer which spans all PCEP sessions to that peer. | |
| IPt tmnxPcepPccPeerAddrType | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.1 | InetAddressType | not-accessible | The value of tmnxPcepPccPeerAddrType specifies the address type of the peer's Internet address. |
| IP tmnxPcepPccPeerAddr | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.2 | InetAddress | not-accessible | The value of tmnxPcepPccPeerAddr specifies the Internet address of the peer. |
| ROW tmnxPcepPccPeerRowStatus | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.3 | RowStatus | read-create | The value of tmnxPcepPccPeerRowStatus controls the creation and deletion of rows for this peer table. |
| TIM tmnxPcepPccPeerLastChanged | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.4 | TimeStamp | read-only | The value of tmnxPcepPccPeerLastChanged indicates the sysUpTime at the time of the most recent change to this peer row. |
| TMN tmnxPcepPccPeerAdminState | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.5 | TmnxAdminState | read-create | The value of tmnxPcepPccPeerAdminState specifies the desired administrative state of this peer. |
| TMN tmnxPcepPccPeerOperState | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.6 | TmnxOperState | read-only | The value of tmnxPcepPccPeerOperState indicated the operational state of this peer. |
| OCT tmnxPcepPccPeerSpeakerId | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.7 | OCTET STRING | read-only | The value of tmnxPcepPccPeerSpeakerId indicates an unique speaker identifier for the peer that does change during the lifetime of the speaker. |
| TMN tmnxPcepPccPeerCapability | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.8 | TmnxPcepCapabilities | read-only | The value of tmnxPcepPccPeerCapability indicates the capabilities of this peer. |
| INT tmnxPcepPccPeerSyncState | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.9 | INTEGER | read-only | The value of tmnxPcepPccPeerSyncState indicates the synchronization state of this peer. The valid options are: notInitialized (0) - Indicates the State Synchronization has not yet started or not initialized due to no connection with the peer. inProgress (1) - Indicates the State Synchronization is in progress. done (2) - Indicates the State Synchronization has been completed. |
| T/F tmnxPcepPccPeerIsOverloaded | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.10 | TruthValue | read-only | The value of tmnxPcepPccPeerIsOverloaded indicates whether the peer is overloaded with the processing of existing requests and is unable to handle new requests leading to unacceptable response times. |
| TIM tmnxPcepPccPeerSessEstablishTime | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.11 | TimeStamp | read-only | The value of tmnxPcepPccPeerSessEstablishTime indicates how long this session with the peer has been in the established state. |
| U32 tmnxPcepPccPeerOperKeepAlive | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.12 | Unsigned32 | read-only | The value of tmnxPcepPccPeerOperKeepAlive indicates the operational value of keep alive interval in use by this entity's peer. This is the maximum time between two consecutive messages sent to a peer. |
| U32 tmnxPcepPccPeerOperDeadTimer | 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.13 | Unsigned32 | read-only | The value of tmnxPcepPccPeerOperDeadTimer indicates the operational value of dead timer interval in use by this entity's peer. This is the time after which a peer should declare a session down if it does not receive any PCEP messages. |
| tmnxPcepPcePeerTable | 1.3.6.1.4.1.6527.3.1.2.101.2.5 | not-accessible | The tmnxPcepPcePeerTable contains information about peers known by the PCEP entity. | |
| tmnxPcepPcePeerEntry | 1.3.6.1.4.1.6527.3.1.2.101.2.5.1 | not-accessible | The value of tmnxPcepPcePeerEntry represents information about a single peer which spans all PCEP sessions to that peer. | |
| IPt tmnxPcepPcePeerAddrType | 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.1 | InetAddressType | not-accessible | The value of tmnxPcepPcePeerAddrType specifies the address type of the PCE peer's Internet address. |
| IP tmnxPcepPcePeerAddr | 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.2 | InetAddress | not-accessible | The value of tmnxPcepPcePeerAddr specifies the Internet address of the PCE peer. |
| INE tmnxPcepPcePeerPort | 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.3 | InetPortNumber | read-only | The value of tmnxPcepPcePeerPort indicates PCE peer's port number. |
| TMN tmnxPcepPcePeerCapability | 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.4 | TmnxPcepCapabilities | read-only | The value of tmnxPcepPcePeerCapability indicates the capabilities of this PCE peer. |
| INT tmnxPcepPcePeerSyncState | 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.5 | INTEGER | read-only | The value of tmnxPcepPcePeerSyncState indicates the synchronization state of this peer. The valid options are: notInitialized (0) - Indicates the State Synchronization has not yet started or not initalized due to no connection with the peer. inProgress (1) - Indicates the State Synchronization is in progress. done (2) - Indicates the State Synchronization has been completed. |
| OCT tmnxPcepPcePeerSpeakerId | 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.6 | OCTET STRING | read-only | The value of tmnxPcepPcePeerSpeakerId indicates an unique speaker identifier for the peer that does change during the lifetime of the speaker. |
| TIM tmnxPcepPcePeerSessEstablishTime | 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.7 | TimeStamp | read-only | The value of tmnxPcepPcePeerSessEstablishTime indicates how long this session with the peer has been in the established state. |
| U32 tmnxPcepPcePeerOperKeepAlive | 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.8 | Unsigned32 | read-only | The value of tmnxPcepPcePeerOperKeepAlive indicates the operational value of keep alive interval in use by this entity's peer. This is the maximum time between two consecutive messages sent to a peer. |
| U32 tmnxPcepPcePeerOperDeadTimer | 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.9 | Unsigned32 | read-only | The value of tmnxPcepPcePeerOperDeadTimer indicates the operational value of dead timer interval in use by this entity's peer. This is the time after which a peer should declare a session down if it does not receive any PCEP messages. |
| tmnxPcepStatsObjects | 1.3.6.1.4.1.6527.3.1.2.101.3 | |||
| tmnxPcepPccStatsObjects | 1.3.6.1.4.1.6527.3.1.2.101.3.1 | |||
| tmnxPcepPccReqMsgInfoTable | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1 | not-accessible | The tmnxPcepPccReqMsgInfoTable contains Path Computation Request (PCReq) messages information sent by PCC to request a path computation. | |
| tmnxPcepPccReqMsgInfoEntry | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1 | not-accessible | The value of tmnxPcepPccReqMsgInfoEntry represents information related to Path Computation Request (PCReq) messages sent by PCC requesting for path computation. | |
| U32 tmnxPcepPccReqMsgRequestId | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.1 | Unsigned32 | not-accessible | The value of tmnxPcepPccReqMsgRequestId specifies the unique path computation request identifier represented in PCReq message. |
| TMN tmnxPcepPccReqMsgLspType | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.2 | TmnxPcepLspType | read-only | The value of tmnxPcepPccReqMsgLspType indicates the type of Labeled Switch Path (LSP) connection. |
| U32 tmnxPcepPccReqMsgTunnelId | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.3 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgTunnelId indicates the unique tunnel identifier that remains constant over the life time of a tunnel. |
| U32 tmnxPcepPccReqMsgLspId | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.4 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgLspId indicates the unique identifier for LSP. |
| IPt tmnxPcepPccReqMsgExtTunnelIdType | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.5 | InetAddressType | read-only | The value tmnxPcepPccReqMsgExtTunnelIdType indicates the address type for tmnxPcepPccReqMsgExtTunnelId. |
| IP tmnxPcepPccReqMsgExtTunnelId | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.6 | InetAddress | read-only | The value of tmnxPcepPccReqMsgExtTunnelId indicates the extended tunnel identifier. |
| TLN tmnxPcepPccReqMsgLspName | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.7 | TLNamedItemOrEmpty | read-only | The value of tmnxPcepPccReqMsgLspName indicates the LSP path name that is unique in the PCC and remains constant throughout a path's life time. |
| IPt tmnxPcepPccReqMsgSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.8 | InetAddressType | read-only | The value tmnxPcepPccReqMsgSrcAddrType indicates the address type for tmnxPcepPccReqMsgSrcAddr. |
| IP tmnxPcepPccReqMsgSrcAddr | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.9 | InetAddress | read-only | The value of tmnxPcepPccReqMsgSrcAddr indicates the source address of the path for which path computation is requested. It is the END-POINTS object used in PCReq message. |
| IPt tmnxPcepPccReqMsgDstAddrType | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.10 | InetAddressType | read-only | The value tmnxPcepPccReqMsgDstAddrType indicates the address type for tmnxPcepPccReqMsgDstAddr. |
| IP tmnxPcepPccReqMsgDstAddr | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.11 | InetAddress | read-only | The value of tmnxPcepPccReqMsgDstAddr indicates the destination address of the path for which path computation is requested. It is the END-POINTS object used in PCReq message. |
| INT tmnxPcepPccReqMsgState | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.12 | INTEGER | read-only | The value of tmnxPcepPccReqMsgState indicates the state of PCReq message: unknown (0) - The state of PCReq message is unknown. requestParameter(1) - Request Parameter (RP) object is included in the PCReq message. sentForCompute (2) - PCReq message has been sent for path computation. errorReceived (3) - Path Computation Error (PCErr) message is received by the PCC. notifyReceived (4) - Path Computation Notification (PCNtf) message is received by the PCC. cancel (5) - PCReq message has been cancelled. computeReceived (6) - Path computation is received by the PCC. |
| C64 tmnxPcepPccReqMsgSvecId | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.13 | Counter64 | read-only | The value of tmnxPcepPccReqMsgSvecId indicates the Synchronization VECtor (SVEC) identifier for Synchronized Dependent Path Computations. |
| U32 tmnxPcepPccReqMsgIgpMetric | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.14 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgIgpMetric indicates Interior Gateway Protocol (IGP) metric that must be optimized by the path computation algorithm for providing the cost of computed path. It is the METRIC object used in PCReq message. |
| U32 tmnxPcepPccReqMsgTeMetric | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.15 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgTeMetric indicates Traffic Engineering (TE) metric that must be optimized by the path computation algorithm for providing the cost of computed path. It is the METRIC object used in PCReq message. |
| U32 tmnxPcepPccReqMsgHopCount | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.16 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgHopCount indicates the number of hops that transversed. It is the METRIC object used in PCReq message. |
| BIT tmnxPcepPccReqMsgMetricBound | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.17 | Bits | read-only | The value of tmnxPcepPccReqMsgMetricBound indicates whether the metric-value specifies a bound (a maximum) for the path metric that must not be exceeded for the PCC to consider the computed path as acceptable. It is the METRIC object used in PCReq message. When the value of the bit 'igpMetric (0)' is set to one, it indicates that the metric-value specified by tmnxPcepPccReqMsgIgpMetric is a bound value. When the value of the bit 'teMetric (1)' is set to one, it indicates that the metric-value specified by tmnxPcepPccReqMsgTeMetric is a bound value. When the value of the bit 'hopCount (2)' is set to one, it indicates that the metric-value specified by tmnxPcepPccReqMsgHopCount is a bound value. |
| BIT tmnxPcepPccReqMsgMetricCompute | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.18 | Bits | read-only | The value of tmnxPcepPccReqMsgMetricCompute indicates whether PCE must provide the computed path metric value in Path Computation Response (PCRep) message for the corresponding metric. It is the METRIC object used in PCReq message. When the value of the bit 'igpMetric (0)' is set to one, it indicates that PCE must provide the computed path metric value for IGP metric in PCRep message. When the value of the bit 'teMetric (1)' is set to one, it indicates that PCE must provide the computed path metric value for TE Metric in PCRep message. When the value of the bit 'hopCount (2)' is set to one, it indicates that PCE must provide the computed path metric value for Hop Count in PCRep message. |
| T/F tmnxPcepPccReqMsgLclProtDesired | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.19 | TruthValue | read-only | The value of tmnxPcepPccReqMsgLclProtDesired indicates whether local protection is desired or not. It is the LSPA (LSP Attribute) object used in PCReq message. When the value of this object is set to 'true (1)', it indicates that the computed path must include links protected with Fast Reroute as defined in the maximum number of hops to be transversed that must not be exceeded to consider computed path as acceptable. |
| U32 tmnxPcepPccReqMsgSetupPriority | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.20 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgSetupPriority indicates the priority of the TE LSP with respect to taking resources. The value of 0 represents highest priority. The setup priority indicates whether this session can preempt another session. It is the LSPA object used in PCReq message. |
| U32 tmnxPcepPccReqMsgHoldingPriority | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.21 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgHoldingPriority indicates the priority of of the TE LSP with respect to holding resources. The value of 0 represents highest priority. The holding priority indicates whether this session can be preempted by another session. It is the LSPA object used in PCReq message. |
| U32 tmnxPcepPccReqMsgExcludeAny | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.22 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgExcludeAny indicates a set of attribute filters associated with a tunnel any of which renders a link unacceptable. It is the LSPA object used in PCReq message. |
| U32 tmnxPcepPccReqMsgIncludeAny | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.23 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgIncludeAny indicates a set of attribute filters associated with a tunnel any of which renders a link acceptable. It is the LSPA object used in PCReq message. |
| U32 tmnxPcepPccReqMsgIncludeAll | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.24 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgIncludeAll indicates a set of attribute filters associated with a tunnel all of which much be present for a link to be acceptable. It is the LSPA object used in PCReq message. |
| U32 tmnxPcepPccReqMsgPriority | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.25 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgPriority indicates the priority of the PCReq message. It is the RP object used in PCReq message. |
| T/F tmnxPcepPccReqMsgReoptimization | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.26 | TruthValue | read-only | The value of tmnxPcepPccReqMsgReoptimization indicates whether the PCReq message relates to the reoptimization of an existing TE LSP. It is the RP object used in PCReq message. |
| T/F tmnxPcepPccReqMsgBidirectional | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.27 | TruthValue | read-only | The value of tmnxPcepPccReqMsgBidirectional indicates whether the PCReq message relates to a bi-directional TE LSP that has the same traffic engineering requirements including fate sharing, protection and restoration, LSRs, TE links, and resource requirements (e.g., latency and jitter) in each direction. It is the RP object used in PCReq message. |
| T/F tmnxPcepPccReqMsgStrictLoose | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.28 | TruthValue | read-only | The value of tmnxPcepPccReqMsgStrictLoose indicates whether the path is strict or loose. It is the RP object used in PCReq message. When the value of this object is set to 'true (1)', it indicates that a loose path is acceptable. When the value of this object is set to 'false (2)', it indicates that a path exclusively made of strict hops is required. |
| U32 tmnxPcepPccReqMsgLspBandwidth | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.29 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgLspBandwidth indicates the bandwidth that is being requested by the LSP. |
| U32 tmnxPcepPccReqMsgMaxSrLabels | 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.30 | Unsigned32 | read-only | The value of tmnxPcepPccReqMsgMaxSrLabels indicates maximum segment routing label stack size for this LSP. |
| tmnxPcepPccReqPathProfInfoTable | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2 | not-accessible | The tmnxPcepPccReqPathProfInfoTable contains Path Computation Request (PCReq) messages containing path-profile information sent by PCC to request a path computation. | |
| tmnxPcepPccReqPathProfInfoEntry | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1 | not-accessible | The value of tmnxPcepPccReqPathProfInfoEntry represents path-profile information related to Path Computation Request (PCReq) messages sent by PCC requesting for path computation. A valid entry for this table is returned only if the table contains atleast one non-zero value. | |
| U32 tmnxPcepPccReqPathProf1 | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.1 | Unsigned32 | read-only | The value of tmnxPcepPccReqPathProf1 indicates the path profile identifier. |
| U32 tmnxPcepPccReqExtendedPathProf1 | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.2 | Unsigned32 | read-only | The value of tmnxPcepPccReqExtendedPathProf1 indicates the extended identifier associated with the path profile identifier. |
| U32 tmnxPcepPccReqPathProf2 | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.3 | Unsigned32 | read-only | The value of tmnxPcepPccReqPathProf2 indicates the path profile identifier. |
| U32 tmnxPcepPccReqExtendedPathProf2 | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.4 | Unsigned32 | read-only | The value of tmnxPcepPccReqExtendedPathProf2 indicates the extended identifier associated with the path profile identifier. |
| U32 tmnxPcepPccReqPathProf3 | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.5 | Unsigned32 | read-only | The value of tmnxPcepPccReqPathProf3 indicates the path profile identifier. |
| U32 tmnxPcepPccReqExtendedPathProf3 | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.6 | Unsigned32 | read-only | The value of tmnxPcepPccReqExtendedPathProf3 indicates the extended identifier associated with the path profile identifier. |
| U32 tmnxPcepPccReqPathProf4 | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.7 | Unsigned32 | read-only | The value of tmnxPcepPccReqPathProf4 indicates the path profile identifier. |
| U32 tmnxPcepPccReqExtendedPathProf4 | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.8 | Unsigned32 | read-only | The value of tmnxPcepPccReqExtendedPathProf4 indicates the extended identifier associated with the path profile identifier. |
| U32 tmnxPcepPccReqPathProf5 | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.9 | Unsigned32 | read-only | The value of tmnxPcepPccReqPathProf5 indicates the path profile identifier. |
| U32 tmnxPcepPccReqExtendedPathProf5 | 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.10 | Unsigned32 | read-only | The value of tmnxPcepPccReqExtendedPathProf5 indicates the extended identifier associated with the path profile identifier. |
| tmnxPcepPccLspUpdateInfoTable | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3 | not-accessible | The tmnxPcepPccLspUpdateInfoTable contains Labeled Switch Path (LSP) update information sent by a PCE to a PCC to update attributes of a LSP. | |
| tmnxPcepPccLspUpdateInfoEntry | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1 | not-accessible | The value of tmnxPcepPccLspUpdateInfoEntry represents LSP update information sent by a PCE to a PCC to update attributes of a LSP. | |
| U32 tmnxPcepPccLspUpdPLspId | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.1 | Unsigned32 | not-accessible | The value of tmnxPcepPccLspUpdPLspId specifies an unique PCEP-specific identifier for the LSP created by a PCC that remains constant for the life time of a PCEP session. |
| U32 tmnxPcepPccLspUpdLspId | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.2 | Unsigned32 | read-only | The value of tmnxPcepPccLspUpdLspId indicates the unique identifier for LSP. |
| TMN tmnxPcepPccLspUpdLspType | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.3 | TmnxPcepLspType | read-only | The value of tmnxPcepPccLspUpdLspType indicates the type of LSP connection. |
| U32 tmnxPcepPccLspUpdTunnelId | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.4 | Unsigned32 | read-only | The value of tmnxPcepPccLspUpdTunnelId indicates the unique tunnel identifier that remains constant over the life time of a tunnel. |
| IPt tmnxPcepPccLspUpdExtTunnelIdType | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.5 | InetAddressType | read-only | The value tmnxPcepPccLspUpdExtTunnelIdType indicates the address type for tmnxPcepPccLspUpdExtTunnelId. |
| IP tmnxPcepPccLspUpdExtTunnelId | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.6 | InetAddress | read-only | The value of tmnxPcepPccLspUpdExtTunnelId indicates the extended tunnel identifier. |
| TLN tmnxPcepPccLspUpdLspName | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.7 | TLNamedItemOrEmpty | read-only | The value of tmnxPcepPccLspUpdLspName indicates the LSP path name that is unique in the PCC and remains constant throughout a path's life time. |
| IPt tmnxPcepPccLspUpdSenderType | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.8 | InetAddressType | read-only | The value tmnxPcepPccLspUpdSenderType indicates the address type for tmnxPcepPccLspUpdSenderAddr. |
| IP tmnxPcepPccLspUpdSenderAddr | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.9 | InetAddress | read-only | The value of tmnxPcepPccLspUpdSenderAddr indicates the sender node's address. |
| IPt tmnxPcepPccLspUpdSourceType | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.10 | InetAddressType | read-only | The value tmnxPcepPccLspUpdSourceType indicates the address type for tmnxPcepPccLspUpdSourceAddr. |
| IP tmnxPcepPccLspUpdSourceAddr | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.11 | InetAddress | read-only | The value of tmnxPcepPccLspUpdSourceAddr indicates the sender address of the LSP. |
| IPt tmnxPcepPccLspUpdDestinationType | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.12 | InetAddressType | read-only | The value tmnxPcepPccLspUpdDestinationType indicates the address type for tmnxPcepPccLspUpdDestinationAddr. |
| IP tmnxPcepPccLspUpdDestinationAddr | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.13 | InetAddress | read-only | The value of tmnxPcepPccLspUpdDestinationAddr indicates the destination address of the LSP. |
| T/F tmnxPcepPccLspUpdLspDelegated | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.14 | TruthValue | read-only | The value of tmnxPcepPccLspUpdLspDelegated indicates whether the PCC is delegating the LSP to the PCE. |
| IPt tmnxPcepPccLspUpdDelgatdPeerType | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.15 | InetAddressType | read-only | The value tmnxPcepPccLspUpdDelgatdPeerType indicates the address type for tmnxPcepPccLspUpdDelgatdPeerAddr. |
| IP tmnxPcepPccLspUpdDelgatdPeerAddr | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.16 | InetAddress | read-only | The value of tmnxPcepPccLspUpdDelgatdPeerAddr indicates the peer address to which the PCC has delegated the LSP. |
| INT tmnxPcepPccLspUpdOperState | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.17 | INTEGER | read-only | The value of tmnxPcepPccLspUpdOperState indicates the operational status of the LSP: down (0) - LSP is not active. up (1) - LSP has been signalled. active (2) - LSP is up and carrying traffic. goingDown (3) - LSP is being torn down, resources are being released. goingUp (4) - LSP is being signalled. |
| INT tmnxPcepPccLspUpdLspError | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.18 | INTEGER | read-only | The value of tmnxPcepPccLspUpdLspError indicates the error information containing the reason for LSP update failure: notApplicable (0) - Not Applicable. unknownReason (1) - Unknown reason. limitRchdForPceLsp (2) - Limit reached for PCE-controlled LSPs. manyPendingLspUpdate (3) - Too many pending LSP update requests. unacceptableParameters(4) - Unacceptable parameters. internalError (5) - Internal error. lspAdminDown (6) - LSP administratively brought down. lspPreempted (7) - LSP preempted. rsvpSignalingError (8) - RSVP signaling error. |
| INT tmnxPcepPccLspUpdState | 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.19 | INTEGER | read-only | The value of tmnxPcepPccLspUpdState indicates the state of LSP: notApplicable (0) - Make-Before-Break (MBB) is not-applicable or is not in progress. mbbInProgress (1) - MBB procedure is in progress. mbbFail (2) - MBB procedure failed. mbbSuccess (3) - MBB procedure succeeded. updateDelegation (4) - deledation update is being processed. lspDown (5) - LSP down update is being processed. |
| tmnxPcepPceStatsObjects | 1.3.6.1.4.1.6527.3.1.2.101.3.2 | |||
| tmnxPcepPeerStatsObjects | 1.3.6.1.4.1.6527.3.1.2.101.3.3 | |||
| tmnxPcepPeerStatsTable | 1.3.6.1.4.1.6527.3.1.2.101.3.3.1 | not-accessible | The tmnxPcepPeerStatsTable contains statistics information about peers known by the PCEP entity. | |
| tmnxPcepPeerStatsEntry | 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1 | not-accessible | The value of tmnxPcepPeerStatsEntry represents statistics information about a single peer which spans all PCEP sessions to that peer. | |
| IPt tmnxPcepPeerAddrType | 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.1 | InetAddressType | not-accessible | The value of tmnxPcepPeerAddrType specifies the address type of the peer's Internet address. |
| IP tmnxPcepPeerAddr | 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.2 | InetAddress | not-accessible | The value of tmnxPcepPeerAddr specifies the Internet address of the peer. |
| C32 tmnxPcepPeerNumPCRptSentEx | 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.3 | Counter32 | read-only | The value of tmnxPcepPeerNumPCRptSent indicates the number of PCRpt messages sent to this peer. |
| C32 tmnxPcepPeerNumPCRptRcvd | 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.4 | Counter32 | read-only | The value of tmnxPcepPeerNumPCRptRcvd indicates the number of PCRpt messages received from this peer. |
| C32 tmnxPcepPeerNumPCUpdSent | 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.5 | Counter32 | read-only | The value of tmnxPcepPeerNumPCUpdSent indicates the number of PCUpd messages sent to this peer. |
| C32 tmnxPcepPeerNumPCUpdRcvd | 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.6 | Counter32 | read-only | The value of tmnxPcepPeerNumPCUpdRcvd indicates the number of PCUpd messages received from this peer. |
| C32 tmnxPcepPeerNumRptSent | 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.7 | Counter32 | read-only | The value of tmnxPcepPeerNumRptSent indicates the number of report messages sent to this peer. This might be greater than tmnxPcepPeerNumPCRptSent because multiple requests can be batched into a single PCRpt message. |
| C32 tmnxPcepPeerNumRptRcvd | 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.8 | Counter32 | read-only | The value of tmnxPcepPeerNumRptRcvd indicates the number of report messages received from this peer. This might be greater than tmnxPcepPeerNumPCRptRcvd because multiple requests can be batched into a single PCRpt message. |
| tmnxPcepNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.101 | |||
| tmnxPcepNotification | 1.3.6.1.4.1.6527.3.1.3.101.0 |
RFC description
Nokia TimeT-series MIB for Path Computation Element Communication Protocol (PCEP); manages MPLS path computation on SR systems.
Start monitoring Nokia SROS routers (7750 SR, 7450 ESS) acting as PCEP client/server (PCEP session admin/keepalive status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.