All MIBs › TIMETRA-DIAMETER-MIB
Organization: Alcatel-Lucent
Last Updated: 2012-02-28
Category: Nokia SR OS / Alcatel-Lucent 7750 SR, Subscriber and Mobile Management
Description: Manages Nokia/Alcatel-Lucent 7750 SR Diameter protocol peers, applications, and session statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TIMETRA-DIAMETER-MIB?
This is a Nokia/Alcatel-Lucent proprietary MIB for the 7750 SR SROS platform, covering the Diameter protocol used for AAA (authentication, authorization and accounting) signaling in mobile and broadband networks. It exposes configuration data for Diameter policies/peers -- origin host/realm, source address, router binding -- along with row-status and change-tracking objects for each policy. Though primarily a provisioning MIB, its status objects let an operator monitor the operational/administrative status of each Diameter policy and peer relationship, revealing whether a peer association is active or was silently left misconfigured. Being a Nokia SROS extension it relies on the vendor's textual-convention MIB and interacts with the virtual-router (vRtr) instances defined across the wider Timetra suite. It's typically deployed on 7750 SR routers acting as Diameter routing agents or gateways in mobile packet core / policy-control environments, where a TIMETRA-DIAMETER-MIB download lets operators load the module into their SNMP management tools.
IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-DIAMETER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia/Alcatel-Lucent 7750 SR service router
Monitoring Examples
An admin polls tmnxDiameterPlcyTable / tmnxDiameterPlcyEntry, keyed by tmnxDiamPlcyName, to check tmnxDiamPlcyRowStatus and tmnxDiamPlcyLastMgmtChange for each configured Diameter policy. Fields like tmnxDiamPlcyOriginHost, tmnxDiamPlcyOriginRealm and tmnxDiamPlcyRouter identify which virtual router and realm a policy belongs to, while tmnxDiamPlcySourceAddrType/tmnxDiamPlcySourceAddr show the source address used for peer connections. An admin watching for a stale tmnxDiamPlcyLastMgmtChange timestamp combined with an unexpected row status can spot a Diameter peer that failed to reprovision after a config push.
What Can Be Monitored
- Diameter policy row status
- Diameter policy last management change
- origin host and realm
- source address configuration
- router/virtual-router binding
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
From TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
From TIMETRA-TC-MIB
| TItemDescription | |
| TNamedItem | |
| TmnxSubNasPortPrefixType | |
| TmnxSubNasPortSuffixType | |
| TmnxVRtrID |
How to Use in IPNetwork Monitor
Example using tmnxDiamPeerStCiTcpSendFailed OID:
Select a Nokia/Alcatel-Lucent 7750 SR service router (Diameter AAA policy/peer status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tmnxDiamPeerStCiTcpSendFailed into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of tmnxDiamPeerStCiTcpSendFailed indicates client initiated roundtrip DIAMETER statistics regarding the number of TCP send failures. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| timetraDiameterMIBModule | 1.3.6.1.4.1.6527.1.1.3.58 | This document is the SNMP MIB module to manage and provision DIAMETER on the Alcatel-Lucent SROS device. Copyright 2008-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| tmnxDiameterConformance | 1.3.6.1.4.1.6527.3.1.1.58 | |||
| tmnxDiameterCompliances | 1.3.6.1.4.1.6527.3.1.1.58.1 | |||
| tmnxDiameterV8v0MIBCompliance | 1.3.6.1.4.1.6527.3.1.1.58.1.1 | The compliance statement for TIMETRA-DIAMETER-MIB on Alcatel-Lucent SROS and 7710 series systems release R8.0. | ||
| tmnxDiameterV10v0MIBCompliance | 1.3.6.1.4.1.6527.3.1.1.58.1.2 | The compliance statement for TIMETRA-DIAMETER-MIB on Alcatel-Lucent SROS and 7710 series systems release R10.0. | ||
| tmnxDiameterGroups | 1.3.6.1.4.1.6527.3.1.1.58.2 | |||
| tmnxDiameterBaseV7v0Group | 1.3.6.1.4.1.6527.3.1.1.58.2.1 | The group of objects supporting DIAMETER on Alcatel-Lucent SROS series systems 7.0 release. | ||
| tmnxDiameterDccaGroup | 1.3.6.1.4.1.6527.3.1.1.58.2.2 | The group of objects supporting DIAMETER DCCA on Alcatel-Lucent SROS series systems. | ||
| tmnxDiameterBaseV8v0Group | 1.3.6.1.4.1.6527.3.1.1.58.2.3 | The group of objects supporting DIAMETER on Alcatel-Lucent SROS series systems 8.0 release. | ||
| tmnxDiameterNotifyV8v0Group | 1.3.6.1.4.1.6527.3.1.1.58.2.4 | The group of notifications supporting DIAMETER on Alcatel-Lucent SROS series systems 8.0 release. | ||
| tmnxDiameterV8v0NotifyObjsGroup | 1.3.6.1.4.1.6527.3.1.1.58.2.5 | The group of objects supporting management of DIAMETER notification objects on Alcatel-Lucent SROS series systems 8.0 release. | ||
| tmnxDiameterDccaGxGroup | 1.3.6.1.4.1.6527.3.1.1.58.2.6 | The group of objects supporting DIAMETER DCCA Gx Interface on Alcatel-Lucent SROS series systems. | ||
| tmnxDiameterDccaV10v0Group | 1.3.6.1.4.1.6527.3.1.1.58.2.7 | The group of objects supporting DIAMETER vendor type on Alcatel-Lucent SROS series systems. | ||
| tmnxDiameterNotifyV10v0Group | 1.3.6.1.4.1.6527.3.1.1.58.2.8 | The group of notifications supporting DIAMETER on Alcatel-Lucent SROS series systems 10.0 release. | ||
| tmnxDiameterV10v0NotifyObjsGroup | 1.3.6.1.4.1.6527.3.1.1.58.2.9 | The group of objects supporting management of DIAMETER notification objects on Alcatel-Lucent SROS series systems 10.0 release. | ||
| tmnxDiameter | 1.3.6.1.4.1.6527.3.1.2.58 | |||
| tmnxDiameterBaseObjects | 1.3.6.1.4.1.6527.3.1.2.58.1 | |||
| TIM tmnxDiameterPlcyTableLastChngd | 1.3.6.1.4.1.6527.3.1.2.58.1.1 | TimeStamp | read-only | The value of tmnxDiameterPlcyTableLastChngd indicates the sysUpTime at the time of the most recent management-initiated change to the tmnxDiameterPlcyTable. |
| tmnxDiameterPlcyTable | 1.3.6.1.4.1.6527.3.1.2.58.1.2 | not-accessible | The tmnxDiameterPlcyTable has an entry for each DIAMETER policy configured in the system. | |
| tmnxDiameterPlcyEntry | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1 | not-accessible | Each row entry represents a DIAMETER policy configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxDiamPlcyRowStatus. | |
| TNA tmnxDiamPlcyName | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.1 | TNamedItem | not-accessible | The value of tmnxDiamPlcyName specifies the name of the DIAMETER policy. |
| ROW tmnxDiamPlcyRowStatus | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.2 | RowStatus | read-create | The value of tmnxDiamPlcyRowStatus controls the creation and deletion of rows in this table. |
| TIM tmnxDiamPlcyLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.3 | TimeStamp | read-only | The value of tmnxDiamPlcyLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row. |
| TIT tmnxDiamPlcyDescription | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.4 | TItemDescription | read-create | The value of tmnxDiamPlcyDescription specifies the user provided description of this DIAMETER policy. |
| STR tmnxDiamPlcyOriginHost | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.5 | DisplayString | read-create | The value of tmnxDiamPlcyOriginHost specifies the Origin-Host AVP (Attribute Value Pair) used by this DIAMETER policy. |
| STR tmnxDiamPlcyOriginRealm | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.6 | DisplayString | read-create | The value of tmnxDiamPlcyOriginRealm specifies the Origin-Realm AVP (Attribute Value Pair) used by this DIAMETER policy. |
| TMN tmnxDiamPlcyRouter | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.7 | TmnxVRtrID | read-create | The value of tmnxDiamPlcyRouter specifies the virtual router in which the DIAMETER connection(s) will be established by this DIAMETER policy. |
| IPt tmnxDiamPlcySourceAddrType | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.8 | InetAddressType | read-create | The value of tmnxDiamPlcySourceAddrType specifies the type of address contained in tmnxDiamPlcySourceAddr. |
| IP tmnxDiamPlcySourceAddr | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.9 | InetAddress | read-create | The value of tmnxDiamPlcySourceAddr specifies the source IP address used to setup DIAMETER connection in this DIAMETER policy. |
| U32 tmnxDiamPlcyWatchdogTimer | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.10 | Unsigned32 | read-create | The value of tmnxDiamPlcyWatchdogTimer specifies the device watchdog timer (TW) (in seconds) used on all connections by this DIAMETER policy. |
| U32 tmnxDiamPlcyConnectionTimer | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.11 | Unsigned32 | read-create | The value of tmnxDiamPlcyConnectionTimer specifies the connection timer (TC) (in seconds) used by this DIAMETER policy. It defines the time the systems waits before attempting to reconnect to a peer after the connection was lost. |
| U32 tmnxDiamPlcyTransactionTimer | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.12 | Unsigned32 | read-create | The value of tmnxDiamPlcyTransactionTimer specifies the transaction timer (in seconds) used by this DIAMETER policy. This timer defines how long the system will wait for an answer from the peer after sending a request. |
| TMN tmnxDiamPlcyVendorSupport | 1.3.6.1.4.1.6527.3.1.2.58.1.2.1.13 | TmnxDiamPlcyVendorSupportType | read-create | The value of tmnxDiamPlcyVendorSupport specifies which vendor specific attributes are used in DCCA sessions for this DIAMETER policy. |
| TIM tmnxDiamPlcyPeerTableLastChngd | 1.3.6.1.4.1.6527.3.1.2.58.1.3 | TimeStamp | read-only | The value of tmnxDiamPlcyPeerTableLastChngd indicates the sysUpTime at the time of the most recent management-initiated change to the tmnxDiameterPlcyPeerTable. |
| tmnxDiameterPlcyPeerTable | 1.3.6.1.4.1.6527.3.1.2.58.1.4 | not-accessible | The tmnxDiameterPlcyPeerTable has an entry for each peer defined in a DIAMETER policy configured in the system. | |
| tmnxDiameterPlcyPeerEntry | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1 | not-accessible | Each row entry represents a peer configured in a DIAMETER policy configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxDiamPlcyPeerRowStatus. | |
| TNA tmnxDiamPlcyPeerName | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.1 | TNamedItem | not-accessible | The value of tmnxDiamPlcyPeerName specifies the name of the peer within a DIAMETER policy. |
| ROW tmnxDiamPlcyPeerRowStatus | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.2 | RowStatus | read-create | The value of tmnxDiamPlcyPeerRowStatus controls the creation and deletion of rows in this table. |
| TIM tmnxDiamPlcyPeerLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.3 | TimeStamp | read-only | The value of tmnxDiamPlcyPeerLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row. |
| TMN tmnxDiamPlcyPeerAdminState | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.4 | TmnxDiameterAdminStatus | read-create | The value of the object tmnxDiamPlcyPeerAdminState specifies the administrative state of the DIAMETER Policy peer. |
| IPt tmnxDiamPlcyPeerAddrType | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.5 | InetAddressType | read-create | The value of tmnxDiamPlcyPeerAddrType specifies the type of address contained in tmnxDiamPlcyPeerAddr. |
| IP tmnxDiamPlcyPeerAddr | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.6 | InetAddress | read-create | The value of tmnxDiamPlcyPeerAddr specifies the IP address of this DIAMETER policy peer. |
| TMN tmnxDiamPlcyPeerTransportProt | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.7 | TmnxDiamPeerTransportProt | read-create | The value of tmnxDiamPlcyPeerTransportProt specifies the transport protocol used towards this DIAMETER policy peer. |
| U32 tmnxDiamPlcyPeerTransportPort | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.8 | Unsigned32 | read-create | The value of tmnxDiamPlcyPeerTransportPort specifies the transport protocol port number used towards this DIAMETER policy peer. |
| STR tmnxDiamPlcyPeerDestHost | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.9 | DisplayString | read-create | The value of tmnxDiamPlcyPeerDestHost specifies the Destination-Host AVP used by this DIAMETER policy peer. |
| STR tmnxDiamPlcyPeerDestRealm | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.10 | DisplayString | read-create | The value of tmnxDiamPlcyPeerDestRealm specifies the Destination-Realm AVP used by this DIAMETER policy peer. |
| U32 tmnxDiamPlcyPeerWatchdogTimer | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.11 | Unsigned32 | read-create | The value of tmnxDiamPlcyPeerWatchdogTimer specifies the device watchdog timer (in seconds) used by this DIAMETER policy peer. A value '0' will cause the peer to use the watchdog timer defined at DIAMETER base level (tmnxDiamPlcyWatchdogTimer). |
| U32 tmnxDiamPlcyPeerConnectionTimer | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.12 | Unsigned32 | read-create | The value of tmnxDiamPlcyPeerConnectionTimer specifies the device connection timer (in seconds) used by this DIAMETER policy peer. A value '0' will cause the peer to use the connection timer defined at DIAMETER base level (tmnxDiamPlcyConnectionTimer). |
| U32 tmnxDiamPlcyPeerTransactTimer | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.13 | Unsigned32 | read-create | The value of tmnxDiamPlcyPeerTransactTimer specifies the device transaction timer (in seconds) used by this DIAMETER policy peer. A value '0' will cause the peer to use the transaction timer defined at DIAMETER base level (tmnxDiamPlcyTransactionTimer). |
| U32 tmnxDiamPlcyPeerPreference | 1.3.6.1.4.1.6527.3.1.2.58.1.4.1.14 | Unsigned32 | read-create | The value of tmnxDiamPlcyPeerPreference specifies the preference given to this DIAMETER policy peer with respect to the other peers associated with this DIAMETER policy. If multiple peers are available for this policy, only the available peer with the highest preference will be used. If multiple peers with the same preference are available, one of them will be used. The highest preference is specified by the value '1'. |
| tmnxDiamPlcyPeerInfoTable | 1.3.6.1.4.1.6527.3.1.2.58.1.5 | not-accessible | The tmnxDiamPlcyPeerInfoTable contains detailed runtime information about the peers defined in a DIAMETER policy. | |
| tmnxDiamPlcyPeerInfoEntry | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1 | not-accessible | Each conceptual row contains detailed runtime information about a peer defined in a DIAMETER policy. Entries in this table are created and removed automatically by the system | |
| INT tmnxDiamPeerPsmState | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.1 | INTEGER | read-only | The value of tmnxDiamPeerPsmState indicates the current state of the DIAMETER peer's state machine. |
| T/F tmnxDiamPeerConnectionSuspended | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.2 | TruthValue | read-only | The value of tmnxDiamPeerConnectionSuspended indicates whether the peer's DIAMETER connection that is in I-Open state has been temporarily put on suspension. |
| INT tmnxDiamPeerCooldownSeqStage | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.3 | INTEGER | read-only | While the value of tmnxDiamPeerCooldownSeqActive is 'true', the value of tmnxDiamPeerCooldownSeqStage indicates the current stage of the cooling down sequence. |
| U32 tmnxDiamPeerOrder | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.4 | Unsigned32 | read-only | The value of tmnxDiamPeerOrder indicates the runtime order of the DIAMETER policy's peers. It is determined both by the configuration level preference and other runtime conditions. A value of zero indicates this field is currently not applicable for this peer. |
| INT tmnxDiamPeerPrimarySecondary | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.5 | INTEGER | read-only | The value of tmnxDiamPeerPrimarySecondary indicates whether the DIAMETER peer figures as primary or secondary peer in its policy. |
| U32 tmnxDiamPeerTcTimerTimeLeft | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.6 | Unsigned32 | read-only | The value of tmnxDiamPeerTcTimerTimeLeft indicates the current countdown progress of the DIAMETER peer's connection timer. |
| U32 tmnxDiamPeerTtTimerTimeLeft | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.7 | Unsigned32 | read-only | The value of tmnxDiamPeerTtTimerTimeLeft indicates the current countdown progress of the DIAMETER peer's transaction timer. |
| U32 tmnxDiamPeerTwTimerTimeLeft | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.8 | Unsigned32 | read-only | The value of tmnxDiamPeerTwTimerTimeLeft indicates the current countdown progress of the DIAMETER peer's watchdog timer. |
| T/F tmnxDiamPeerWatchdogAlgActive | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.9 | TruthValue | read-only | The value of tmnxDiamPeerWatchdogAlgActive indicates whether the DIAMETER application-layer watchdog algorithm is currently running. |
| T/F tmnxDiamPeerWatchdogAnswPending | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.10 | TruthValue | read-only | The value of tmnxDiamPeerWatchdogAnswPending indicates whether reception of a DIAMETER Device Watchdog Answer (DWA) is expected for a corresponding Device Watchdog Request (DWR) waiting in the Pending Message Queue (PMQ). |
| T/F tmnxDiamPeerCooldownSeqPending | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.11 | TruthValue | read-only | The value of tmnxDiamPeerCooldownSeqPending indicates whether the DIAMETER peer's connection manages to get in a non-suspended I-Open state. |
| T/F tmnxDiamPeerCooldownSeqActive | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.12 | TruthValue | read-only | The value of tmnxDiamPeerCooldownSeqActive indicates whether the DIAMETER Cooldown Sequence is currently running. |
| T/F tmnxDiamPeerPeerRemovalPending | 1.3.6.1.4.1.6527.3.1.2.58.1.5.1.13 | TruthValue | read-only | The value of tmnxDiamPeerPeerRemovalPending indicates whether the execution of a DIAMETER peer's removal is still pending until the disconnect-peer roundtrip has finished. |
| tmnxDiamPlcyPeerStatsTable | 1.3.6.1.4.1.6527.3.1.2.58.1.6 | not-accessible | The tmnxDiamPlcyPeerStatsTable contains detailed statistics about the peers defined in a DIAMETER policy. | |
| tmnxDiamPlcyPeerStatsEntry | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1 | not-accessible | Each conceptual row contains detailed statistics about a peer defined in a DIAMETER policy. Entries in this table are created and removed automatically by the system | |
| TIM tmnxDiamPeerStatsLastClearTime | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.1 | TimeStamp | read-only | The value of tmnxDiamPeerStatsLastClearTime indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized. |
| C32 tmnxDiamPeerStCiTcpSendFailedEx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.2 | Counter32 | read-only | The value of tmnxDiamPeerStCiTcpSendFailed indicates client initiated roundtrip DIAMETER statistics regarding the number of TCP send failures. |
| C32 tmnxDiamPeerStCiDiamRxDropCnt | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.3 | Counter32 | read-only | The value of tmnxDiamPeerStCiDiamRxDropCnt indicates client initiated roundtrip DIAMETER statistics regarding the number of dropped response messages upon reception from server. |
| C32 tmnxDiamPeerStCiDiamTxReqs | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.4 | Counter32 | read-only | The value of tmnxDiamPeerStCiDiamTxReqs indicates client initiated roundtrip DIAMETER statistics regarding the number of request messages sent to server. |
| C32 tmnxDiamPeerStCiDiamRxResps | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.5 | Counter32 | read-only | The value of tmnxDiamPeerStCiDiamRxResps indicates client initiated roundtrip DIAMETER statistics regarding the number of response messages received from server. |
| C32 tmnxDiamPeerStCiPendMsgsPMQ | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.6 | Counter32 | read-only | The value of tmnxDiamPeerStCiPendMsgsPMQ indicates client initiated roundtrip DIAMETER statistics regarding the number of request messages in the Pending Message Queue waiting to be matched with corresponding response messages from the server. |
| C32 tmnxDiamPeerStCiReqTimeoutsPMQ | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.7 | Counter32 | read-only | The value of tmnxDiamPeerStCiReqTimeoutsPMQ indicates client initiated roundtrip DIAMETER statistics regarding the number of request messages that were removed from the Pending Message Queue due to a match timeout. |
| C32 tmnxDiamPeerStSiTcpSendFailed | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.8 | Counter32 | read-only | The value of tmnxDiamPeerStSiTcpSendFailed indicates client initiated roundtrip DIAMETER statistics regarding the number of TCP send failures. |
| C32 tmnxDiamPeerStSiDiamRxDropCnt | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.9 | Counter32 | read-only | The value of tmnxDiamPeerStSiDiamRxDropCnt indicates client initiated roundtrip DIAMETER statistics regarding the number of dropped request messages upon reception from server. |
| C32 tmnxDiamPeerStSiDiamRxReqs | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.10 | Counter32 | read-only | The value of tmnxDiamPeerStSiDiamRxReqs indicates client initiated roundtrip DIAMETER statistics regarding the number of request messages received from server. |
| C32 tmnxDiamPeerStSiDiamTxResps | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.11 | Counter32 | read-only | The value of tmnxDiamPeerStSiDiamTxResps indicates client initiated roundtrip DIAMETER statistics regarding the number of response messages sent to server. |
| C32 tmnxDiamPeerStErrHdlDiamTxErrCnt | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.12 | Counter32 | read-only | The value of this object is always equal to zero. |
| C32 tmnxDiamPeerStErrHdlDiamRxErrCnt | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.13 | Counter32 | read-only | The value of this object is always equal to zero. |
| C32 tmnxDiamPeerStCcrInitialTx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.14 | Counter32 | read-only | The value of tmnxDiamPeerStCcrInitialTx indicates the number of Credit Control Request messages with CC-Request-Type AVP equal to INITIAL_REQUEST that are transmitted to the server. |
| C32 tmnxDiamPeerStCcaInitialRx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.15 | Counter32 | read-only | The value of tmnxDiamPeerStCcaInitialRx indicates the number of Credit Control Answer messages in response to the CCR INITIAL_REQUEST that are received from the server. |
| C32 tmnxDiamPeerStCcrUpdateTx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.16 | Counter32 | read-only | The value of tmnxDiamPeerStCcrUpdateTx indicates the number of Credit Control Request messages with CC-Request-Type AVP equal to UPDATE_REQUEST that are transmitted to the server. |
| C32 tmnxDiamPeerStCcaUpdateRx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.17 | Counter32 | read-only | The value of tmnxDiamPeerStCcaUpdateRx indicates the number of Credit Control Answer messages in response to the CCR UPDATE_REQUEST that are received from the server. |
| C32 tmnxDiamPeerStCcrTerminateTx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.18 | Counter32 | read-only | The value of tmnxDiamPeerStCcrTerminateTx indicates the number of Credit Control Request messages with CC-Request-Type AVP equal to TERMINATION_REQUEST that are transmitted to the server. |
| C32 tmnxDiamPeerStCcaTerminateRx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.19 | Counter32 | read-only | The value of tmnxDiamPeerStCcaTerminateRx indicates the number of Credit Control Answer messages in response to the CCR TERMINATION_REQUEST that are received from the server. |
| C32 tmnxDiamPeerStCerTx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.20 | Counter32 | read-only | The value of tmnxDiamPeerStCerTx indicates the number of Capabilities-Exchange-Request messages that are transmitted to the server. |
| C32 tmnxDiamPeerStCeaRx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.21 | Counter32 | read-only | The value of tmnxDiamPeerStCeaRx indicates the number of Capabilities-Exchange-Answer messages that are received from the server. |
| C32 tmnxDiamPeerStWdrTx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.24 | Counter32 | read-only | The value of tmnxDiamPeerStWdrTx indicates the number of Device-Watchdog-Request messages that are transmitted to the server. |
| C32 tmnxDiamPeerStWdaRx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.25 | Counter32 | read-only | The value of tmnxDiamPeerStWdaRx indicates the number of Device-Watchdog-Answer messages that are received from the server. |
| C32 tmnxDiamPeerStWdrRx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.26 | Counter32 | read-only | The value of tmnxDiamPeerStWdrRx indicates the number of Device-Watchdog-Request messages that are received from the server. |
| C32 tmnxDiamPeerStWdaTx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.27 | Counter32 | read-only | The value of tmnxDiamPeerStWdaTx indicates the number of Device-Watchdog-Answer messages that are transmitted to the server. |
| C32 tmnxDiamPeerStAsrRx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.30 | Counter32 | read-only | The value of tmnxDiamPeerStAsrRx indicates the number of Abort-Session-Request messages that are received from the server. |
| C32 tmnxDiamPeerStAsaTx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.31 | Counter32 | read-only | The value of tmnxDiamPeerStAsaTx indicates the number of Abort-Session-Answer messages that are transmitted to the server. |
| C32 tmnxDiamPeerStRarRx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.34 | Counter32 | read-only | The value of tmnxDiamPeerStRarRx indicates the number of Re-Auth-Request messages that are received from the server. |
| C32 tmnxDiamPeerStRaaTx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.35 | Counter32 | read-only | The value of tmnxDiamPeerStRaaTx indicates the number of Re-Auth-Answer messages that are transmitted to the server. |
| C32 tmnxDiamPeerStDprTx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.36 | Counter32 | read-only | The value of tmnxDiamPeerStDprTx indicates the number of Disconnect-Peer-Request messages that are transmitted to the server. |
| C32 tmnxDiamPeerStDpaRx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.37 | Counter32 | read-only | The value of tmnxDiamPeerStDpaRx indicates the number of Disconnect-Peer-Answer messages that are received from the server. |
| C32 tmnxDiamPeerStDprRx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.38 | Counter32 | read-only | The value of tmnxDiamPeerStDprRx indicates the number of Disconnect-Peer-Request messages that are received from the server. |
| C32 tmnxDiamPeerStDpaTx | 1.3.6.1.4.1.6527.3.1.2.58.1.6.1.39 | Counter32 | read-only | The value of tmnxDiamPeerStDpaTx indicates the number of Disconnect-Peer-Answer messages that are transmitted to the server. |
| tmnxDiameterDccaObjects | 1.3.6.1.4.1.6527.3.1.2.58.2 | |||
| TIM tmnxDiamPlcyDccaTableLastChngd | 1.3.6.1.4.1.6527.3.1.2.58.2.1 | TimeStamp | read-only | The value of tmnxDiamPlcyDccaTableLastChngd indicates the sysUpTime at the time of the most recent management-initiated change to the tmnxDiameterPlcyDccaTable. DCCA = Diameter Credit Control Application. |
| tmnxDiameterPlcyDccaTable | 1.3.6.1.4.1.6527.3.1.2.58.2.2 | not-accessible | The tmnxDiameterPlcyDccaTable has an entry for each DIAMETER policy configured in the system. | |
| tmnxDiameterPlcyDccaEntry | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1 | not-accessible | Each row entry represents DCCA parameters defined for this DIAMETER policy. Entries are created and deleted by the system. | |
| TIM tmnxDiamPlcyDccaLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.1 | TimeStamp | read-only | The value of tmnxDiamPlcyDccaLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row. |
| T/F tmnxDiamPlcyDccaFailover | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.2 | TruthValue | read-create | The value of tmnxDiamPlcyDccaFailover specifies whether or not moving the CC message stream to a backup server during an ongoing CC session is supported for this DIAMETER policy. |
| TMN tmnxDiamPlcyDccaFailureHndlng | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.3 | TmnxDiamCcFailureHndlng | read-create | The value of tmnxDiamPlcyDccaFailureHndlng specifies what action to take in case of a DCCA session failure for this DIAMETER policy. |
| U32 tmnxDiamPlcyDccaTxTimer | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.4 | Unsigned32 | read-create | The value of tmnxDiamPlcyDccaTxTimer specifies the DCCA Tx Timer (in seconds) for this DIAMETER policy. |
| STR tmnxDiamPlcyDccaAvpServCntxtId | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.5 | DisplayString | read-create | The value of tmnxDiamPlcyDccaAvpServCntxtId specifies the DCCA Service-Context-Id AVP. If set the AVP will be included in CCR (Credit Control Request) messages. |
| STR tmnxDiamPlcyDccaAvpCldStationId | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.6 | DisplayString | read-create | The value of tmnxDiamPlcyDccaAvpCldStationId specifies the RADIUS Called-Station-Id AVP. If set, the AVP will be included in CCR (Credit Control Request) messages. |
| T/F tmnxDiamPlcyDccaAvpRadiusUsrNme | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.7 | TruthValue | read-create | The value of tmnxDiamPlcyDccaAvpRadiusUsrNme specifies whether or not the DIAMETER User-Name AVP will be included in CCR(Credit Control Request) messages. |
| NUM tmnxDiamPlcyDccaAvpSubIdOrg | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.8 | TmnxDiamPlcyDccaAvpOriginType | read-create | The value of tmnxDiamPlcyDccaAvpSubIdOrg specifies the origin of the information to send in the Subscription-Id-Data AVP. |
| INT tmnxDiamPlcyDccaAvpSubIdType | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.9 | INTEGER | read-create | The value of tmnxDiamPlcyDccaAvpSubIdType specifies the type of the identifier stored in the Subscription-Id-Data AVP. |
| T/F tmnxDiamPlcyDccaAvpNasP | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.10 | TruthValue | read-create | The value of tmnxDiamPlcyDccaAvpNasP specifies if the NAS-Port-Id AVP will be included in applicable DIAMETER messages. |
| TMN tmnxDiamPlcyDccaAvpNasPPfixType | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.11 | TmnxSubNasPortPrefixType | read-create | The value of tmnxDiamPlcyDccaAvpNasPPfixType specifies what type of prefix will be added to the NAS-Port AVP if included in DIAMETER messages. |
| STR tmnxDiamPlcyDccaAvpNasPPfixStr | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.12 | DisplayString | read-create | The value of tmnxDiamPlcyDccaAvpNasPPfixStr specifies the user configurable string to be added as prefix to the NAS-Port AVP if included in DIAMETER messages. This field is only applicable if tmnxDiamPlcyDccaAvpNasPPfixType is set to 'userString'. |
| TMN tmnxDiamPlcyDccaAvpNasPSfixType | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.13 | TmnxSubNasPortSuffixType | read-create | The value of tmnxDiamPlcyDccaAvpNasPSfixType specifies what type of suffix will be added to the NAS-Port attribute NAS-Port AVP if included in DIAMETER messages. |
| T/F tmnxDiamPlcyDccaAvpNasPType | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.14 | TruthValue | read-create | The value of tmnxDiamPlcyDccaAvpNasP specifies if the NAS-Port-Type AVP will be included in applicable DIAMETER messages. |
| NUM tmnxDiamPlcyDccaAvpImsiOrg | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.15 | TmnxDiamPlcyDccaAvpOriginType | read-create | The value of tmnxDiamPlcyDccaAvpImsiOrg specifies the origin of the information to send in the International Mobile Subscriber Identity (IMSI) AVP. |
| TMN tmnxDiamPlcyDccaApplicationType | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.50 | TmnxDiamDccaApplicationType | read-create | The value of tmnxDiamPlcyDccaApplicationType specifies the application type associated with this policy. It defines the set of supported values for the Auth-Application-Id AVP. tmnxDiamPlcyDccaApplicationType | Auth-Application-Id --------------------------------|------------------------------------- vfDccaV2 | 4 (standard) gx | 16777238 (vendor-specific 3GPP) |
| U32 tmnxDiamPlcyDccaMaxPendingReq | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.51 | Unsigned32 | read-create | The value of tmnxDiamPlcyDccaMaxPendingReq specifies the maximum number of pending requests for this DIAMETER policy. If the maximum number of pending requests has been exceeded, further requests are buffered or dropped. |
| U32 tmnxDiamPlcyDccaTxRetryLimit | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.52 | Unsigned32 | read-create | The value of tmnxDiamPlcyDccaTxRetryLimit specifies the maximum number of retries for a CCR message associated with this DIAMETER policy. |
| INT tmnxDiamPlcyDccaOutOfCreditRep | 1.3.6.1.4.1.6527.3.1.2.58.2.2.1.53 | INTEGER | read-create | The value of tmnxDiamPlcyDccaOutOfCreditRep specifies the reporting reason in an intermediate interrogation when the final granted units have been consumed and a corresponding out-of-credit-action different from 'disconnect-host' is started. |
| tmnxDiameterNotificationObjs | 1.3.6.1.4.1.6527.3.1.2.58.100 | |||
| TNA tmnxDiamAppPlcyName | 1.3.6.1.4.1.6527.3.1.2.58.100.1 | TNamedItem | accessible-for-notify | The value of tmnxDiamAppPlcyName specifies the name of the DIAMETER policy. |
| TNA tmnxDiamAppPeerName | 1.3.6.1.4.1.6527.3.1.2.58.100.2 | TNamedItem | accessible-for-notify | The value of tmnxDiamAppPeerName specifies the name of the peer within a DIAMETER policy. |
| TIT tmnxDiamAppTrapDescription | 1.3.6.1.4.1.6527.3.1.2.58.100.3 | TItemDescription | accessible-for-notify | The value of tmnxDiamAppTrapDescription specifies the diameter application provided description of the failure for this trap. |
| STR tmnxDiamAppSessionId | 1.3.6.1.4.1.6527.3.1.2.58.100.4 | DisplayString | accessible-for-notify | The value of tmnxDiamAppSessionId specifies the diameter session id for this trap. |
| STR tmnxDiamAppSubscrId | 1.3.6.1.4.1.6527.3.1.2.58.100.5 | DisplayString | accessible-for-notify | The value of tmnxDiamAppSubscrId specifies the subscriber identification for this trap. |
| STR tmnxDiamAppSapId | 1.3.6.1.4.1.6527.3.1.2.58.100.6 | DisplayString | accessible-for-notify | The value of tmnxDiamAppSapId specifies the SAP identification for this trap. |
| TNA tmnxDiamAppSLAProfName | 1.3.6.1.4.1.6527.3.1.2.58.100.7 | TNamedItem | accessible-for-notify | The value of tmnxDiamAppSLAProfName specifies the SLA profile name for this trap. |
| tmnxDiameterNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.58 | |||
| tmnxDiameterNotifications | 1.3.6.1.4.1.6527.3.1.3.58.0 | |||
| NTF tmnxDiamPolicyPeerStateChange | 1.3.6.1.4.1.6527.3.1.3.58.0.1 | A tmnxDiamPolicyPeerStateChange notification is generated when the state of a DIAMETER policy peer changes. | ||
| NTF tmnxDiamAppMessageDropped | 1.3.6.1.4.1.6527.3.1.3.58.0.2 | The tmnxDiamAppMessageDropped notification indicates that the DIAMETER protocol has dropped a message due to some reason. | ||
| NTF tmnxDiamAppSessionFailure | 1.3.6.1.4.1.6527.3.1.3.58.0.3 | The tmnxDiamAppSessionFailure notification indicates that the DIAMETER protocol has a session failure. |
RFC description
DIAMETER protocol management and provisioning for Alcatel-Lucent SROS devices.
Start monitoring Nokia/Alcatel-Lucent 7750 SR service router (Diameter AAA policy/peer status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.