TIMETRA-CALLTRACE-MIB :: tmnxCallTraceJobDstAddr

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TIMETRA-CALLTRACE-MIB › tmnxCallTraceJobDstAddr

tmnxCallTraceJobDstAddr

Module: TIMETRA-CALLTRACE-MIB

OID (symbolic): TIMETRA-CALLTRACE-MIB::tmnxCallTraceJobDstAddr

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.10

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-only

Description: The value of the object tmnxCallTraceJobDstAddr indicates the live output destination address of the trace log generated by this call trace job.

This object can contain a non-empty value only if the value of the object tmnxCallTraceJobDstAddrType is other than 'unknown (0)'.

In that case the live output is being sent to the destination identified by the IP address / FQDN value of this object and the values of the objects tmnxCallTraceJobDstPort and tmnxCallTraceJobVRtrId.

If the value of this object holds FQDN then the resolved IP address is indicated by the value of tmnxCallTraceJobDstResAddr.

If the value of this object is empty then a local compact flash card is used as the destination.

If the value of the object tmnxCallTraceJobDstAddrType is 'unknown (0)' then the size of this object can be only 0.

If the value of the object tmnxCallTraceJobDstAddrType is 'ipv4(1)' then the size of this object can be only 4.

If the value of the object tmnxCallTraceJobDstAddrType is 'ipv6(2)' then the size of this object can be only 16.

If the value of the object tmnxCallTraceJobDstAddrType is 'dns(16)' then the size of this object can be 1..255.

What is tmnxCallTraceJobDstAddr?

Reports the live-output destination address this job is (or was) streaming trace data to; an empty value means the job is writing to local compact flash instead of a remote collector, and if the address was an FQDN, the resolved IP is shown separately in tmnxCallTraceJobDstResAddr.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.10
snmpwalk -v2c -c public <target> TIMETRA-CALLTRACE-MIB::tmnxCallTraceJobDstAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.10.1
snmpget -v2c -c public <target> TIMETRA-CALLTRACE-MIB::tmnxCallTraceJobDstAddr.1

Start monitoring Nokia 7750 SR (SROS) router (Call Trace profile config/storage-capacity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-CALLTRACE-MIB::tmnxCallTraceJobDstAddr OID value, configure state conditions and alerts, and monitor any Nokia 7750 SR (SROS) router (Call Trace profile config/storage-capacity status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.102tmnxCallTraceObjsTIMETRA-CALLTRACE-MIB
1.3.6.1.4.1.6527.3.1.2.102.3tmnxCallTraceStatsObjsTIMETRA-CALLTRACE-MIB
1.3.6.1.4.1.6527.3.1.2.102.3.1tmnxCallTraceJobTableTIMETRA-CALLTRACE-MIB
1.3.6.1.4.1.6527.3.1.2.102.3.1.1tmnxCallTraceJobEntryTIMETRA-CALLTRACE-MIB
1.3.6.1.4.1.6527.3.1.2.102.3.1.1.10tmnxCallTraceJobDstAddrTIMETRA-CALLTRACE-MIB