SLE-MPLS-TP-PW-MIB

All MIBs › SLE-MPLS-TP-PW-MIB

Organization: Dasan Networks

Last Updated: 2015-11-03

Category: DASAN Networks SLE OLT Management, MPLS Transport Profile

Description: Manages DASAN Networks SLE OLT MPLS-TP pseudowire provisioning, status, and traffic parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SLE-MPLS-TP-PW-MIB?

SLE-MPLS-TP-PW-MIB is a DASAN Networks vendor-specific MIB for SLE-series OLT/aggregation platforms managing MPLS-TP pseudowire (PW) provisioning, operational status, and traffic parameters. It exposes pseudowire configuration objects along with per-pseudowire operational state and traffic statistics used to carry Layer 2 services over an MPLS-TP transport network. For monitoring, it functions primarily as a software/service-level status module, letting an operator confirm whether a provisioned pseudowire is up, check its traffic counters, and detect misconfiguration or forwarding failures affecting the emulated circuit. It is built on IETF pseudowire emulation concepts (PWE3) and MPLS-TP standards, and is expected to be used alongside the companion SLE-MPLS-TP-BFD-MIB for fault detection on the same paths. It is deployed by carriers running MPLS-TP-based transport to deliver Ethernet/TDM pseudowire services from DASAN SLE nodes. Network engineers evaluating or troubleshooting this functionality can download the SLE-MPLS-TP-PW-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SLE-MPLS-TP-PW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN Networks SLE-series OLT/aggregation node (MPLS-TP transport)

Monitoring Examples

An operator would poll the pseudowire table to check a given PW's operational status and traffic counters, confirming that a provisioned Layer-2 service between two OLT endpoints is actively forwarding traffic. No concrete sample objects were provided for this module, so exact table/object names cannot be confirmed, but a PW configuration/status table pair with an admin/oper status column is the expected pattern. A PW showing down status while its underlying BFD session (from the companion BFD MIB) also reports down would confirm a forwarding-path fault. This MIB is used for pseudowire service provisioning/status monitoring rather than raw hardware health.

What Can Be Monitored

pseudowire provisioning status
pseudowire operational state
PW traffic statistics
PW configuration parameters

Imported Objects

From DASAN-SMI

sleMgmt

OBJECT-IDENTITY

From IANA-PWE3-MIB

IANAPwTypeTC

From IF-MIB

InterfaceIndexOrZero

From MPLS-TC-STD-MIB

MplsLabel

From PW-TC-STD-MIB

PwGroupID
PwIDType

From Q-BRIDGE-MIB

VlanIdOrAnyOrNone

From SLE-TC-MIB

SleControlRequestResultType
SleControlStatusType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Gauge32
IpAddress
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32
transmission

OIDs

OID symbolic	OID numeric	Type	Access	Description
sleMpls	1.3.6.1.4.1.6296.101.16			SLE MPLS.
sleMplsTpPw	1.3.6.1.4.1.6296.101.16.15			This MIB module containg the managed object definition for MPLS-TP pseudowire(PW) operation. copyright (c) 2015 Dasan Networks and the persons identified as authors of the code. All rights reserved.
sleMplsTpPwCfg	1.3.6.1.4.1.6296.101.16.15.1
sleMplsTpPwCfgInfoTable	1.3.6.1.4.1.6296.101.16.15.1.1		not-accessible	This table specifies information for configuring and status monitoring that is common to all service types and PSN types.
sleMplsTpPwCfgInfoEntry	1.3.6.1.4.1.6296.101.16.15.1.1.1		not-accessible	A row in this table is indexed by sleMplsTpPwCfgInfoId.
PWI sleMplsTpPwCfgInfoId	1.3.6.1.4.1.6296.101.16.15.1.1.1.1	PwIDType	read-only	PW Virtual Circuit ID.
OCT sleMplsTpPwCfgInfoName	1.3.6.1.4.1.6296.101.16.15.1.1.1.2	OCTET STRING	read-only	PW Virtual Circuit Name. It identifies an entry on this table.
INT sleMplsTpPwCfgInfoOwner	1.3.6.1.4.1.6296.101.16.15.1.1.1.3	INTEGER	read-only	Use to indentify the owner of the PW.
IAN sleMplsTpPwCfgInfoType	1.3.6.1.4.1.6296.101.16.15.1.1.1.4	IANAPwTypeTC	read-only	Service type of the PW.
INT sleMplsTpPwCfgInfoControlWord	1.3.6.1.4.1.6296.101.16.15.1.1.1.5	INTEGER	read-only	Status of Control Word negotiation.
INT sleMplsTpPwCfgInfoPeerIdType	1.3.6.1.4.1.6296.101.16.15.1.1.1.6	INTEGER	read-only	Peer Id Type
U32 sleMplsTpPwCfgInfoPeerGolbalId	1.3.6.1.4.1.6296.101.16.15.1.1.1.7	Unsigned32	read-only	PW Peer Global ID.
MPL sleMplsTpPwCfgInfoPeerCc	1.3.6.1.4.1.6296.101.16.15.1.1.1.8	MplsCcId	read-only	PW Peer Country Code(cc).
MPL sleMplsTpPwCfgInfoPeerIcc	1.3.6.1.4.1.6296.101.16.15.1.1.1.9	MplsIccId	read-only	PW Peer ICC.
IP sleMplsTpPwCfgInfoPeerNodeId	1.3.6.1.4.1.6296.101.16.15.1.1.1.10	IpAddress	read-only	PW Peer Node Id.
U32 sleMplsTpPwCfgInfoPeerAcId	1.3.6.1.4.1.6296.101.16.15.1.1.1.11	Unsigned32	read-only	PW Peer Attachment circuit ID.
STR sleMplsTpPwCfgInfoGroupName	1.3.6.1.4.1.6296.101.16.15.1.1.1.12	SnmpAdminString	read-only	PW Local Group name.
PWG sleMplsTpPwCfgInfoGroupId	1.3.6.1.4.1.6296.101.16.15.1.1.1.13	PwGroupID	read-only	PW Local Group Id.
INT sleMplsTpPwCfgInfoOperMode	1.3.6.1.4.1.6296.101.16.15.1.1.1.14	INTEGER	read-only	PW Current Operation mode.
VLA sleMplsTpPwCfgInfoSvlanId	1.3.6.1.4.1.6296.101.16.15.1.1.1.15	VlanIdOrAnyOrNone	read-only	PW SVlan. This should be a valid VLAN-ID when sleMplsTpPwCfgOperMode is pwTaggedMode(2).
INT sleMplsTpPwCfgInfoPwStatus	1.3.6.1.4.1.6296.101.16.15.1.1.1.17	INTEGER	read-only	This object is used to set the pw status tlv.
MPL sleMplsTpPwCfgInfoInlabel	1.3.6.1.4.1.6296.101.16.15.1.1.1.18	MplsLabel	read-only	PW FIB Entry OutLabel.
MPL sleMplsTpPwCfgInfoOutLabel	1.3.6.1.4.1.6296.101.16.15.1.1.1.19	MplsLabel	read-only	PW FIB entry InLabel.
OCT sleMplsTpPwCfgInfoTunnelName	1.3.6.1.4.1.6296.101.16.15.1.1.1.20	OCTET STRING	read-only	PW FIB Entry Tunnel Name.
NUM sleMplsTpPwCfgInfoAcInterfaceIndex	1.3.6.1.4.1.6296.101.16.15.1.1.1.21	InterfaceIndexOrZero	read-only	PW FIB Entry Interface Index.
OCT sleMplsTpPwCfgInfoVcStitchName	1.3.6.1.4.1.6296.101.16.15.1.1.1.22	OCTET STRING	read-only	Multi-segment PW FIB entry stitch name.
INT sleMplsTpPwCfgInfoPriority	1.3.6.1.4.1.6296.101.16.15.1.1.1.23	INTEGER	read-only	PW Priority. In MPLS-TP case, primary only supported.
INT sleMplsTpPwCfgInfostate	1.3.6.1.4.1.6296.101.16.15.1.1.1.24	INTEGER	read-only	Pw state
OCT sleMplsTpPwCfgInfoDescription	1.3.6.1.4.1.6296.101.16.15.1.1.1.25	OCTET STRING	read-write	PW Description.
INT sleMplsTpPwCfgInfoLocalRefreshTimer	1.3.6.1.4.1.6296.101.16.15.1.1.1.26	INTEGER	read-only	pw local refresh timer.
OCT sleMplsTpPwCfgInfoQosServicePolicy	1.3.6.1.4.1.6296.101.16.15.1.1.1.27	OCTET STRING	read-only	pw qos input service policy.
sleMplsTpPwCfgControl	1.3.6.1.4.1.6296.101.16.15.1.2
INT sleMplsTpPwCfgControlRequest	1.3.6.1.4.1.6296.101.16.15.1.2.1	INTEGER	read-write	This object holds the possible read-write columns that can be modified in the Pw table. For each read-write column of Pw table, a Set Operation control value is added in this object.
SLE sleMplsTpPwCfgControlStatus	1.3.6.1.4.1.6296.101.16.15.1.2.2	SleControlStatusType	read-only	This object displays the status of the configuration done.
G32 sleMplsTpPwCfgControlTimer	1.3.6.1.4.1.6296.101.16.15.1.2.3	Gauge32	read-write	This object is based on the SLE style where a timer is configured for every control table.
TIK sleMplsTpPwCfgControlTimestamp	1.3.6.1.4.1.6296.101.16.15.1.2.4	TimeTicks	read-only	This object specifies the time at which the configuration is done.
SLE sleMplsTpPwCfgControlReqResult	1.3.6.1.4.1.6296.101.16.15.1.2.5	SleControlRequestResultType	read-only	The standard result of the SET operation is stored here.
PWI sleMplsTpPwCfgControlId	1.3.6.1.4.1.6296.101.16.15.1.2.6	PwIDType	read-write	PW Virtual Circuit ID.
OCT sleMplsTpPwCfgControlName	1.3.6.1.4.1.6296.101.16.15.1.2.7	OCTET STRING	read-write	PW Virtual Circuit Name. It identifies an entry on this table.
INT sleMplsTpPwCfgControlOwner	1.3.6.1.4.1.6296.101.16.15.1.2.8	INTEGER	read-write	Use to indentify the owner of the PW.
INT sleMplsTpPwCfgControlPeerIdType	1.3.6.1.4.1.6296.101.16.15.1.2.9	INTEGER	read-write	Peer Id Type
U32 sleMplsTpPwCfgControlPeerGolbalId	1.3.6.1.4.1.6296.101.16.15.1.2.10	Unsigned32	read-write	PW Peer Global ID.
MPL sleMplsTpPwCfgControlPeerCc	1.3.6.1.4.1.6296.101.16.15.1.2.11	MplsCcId	read-write	PW Peer Country Code(cc).
MPL sleMplsTpPwCfgControlPeerIcc	1.3.6.1.4.1.6296.101.16.15.1.2.12	MplsIccId	read-write	PW Peer ICC.
IP sleMplsTpPwCfgControlPeerNodeId	1.3.6.1.4.1.6296.101.16.15.1.2.13	IpAddress	read-write	PW Peer Node Id.
U32 sleMplsTpPwCfgControlPeerAcId	1.3.6.1.4.1.6296.101.16.15.1.2.14	Unsigned32	read-write	PW Peer Attachment circuit ID.
OCT sleMplsTpPwCfgControlGroupName	1.3.6.1.4.1.6296.101.16.15.1.2.15	OCTET STRING	read-write	PW Local Group name.
PWG sleMplsTpPwCfgControlGroupId	1.3.6.1.4.1.6296.101.16.15.1.2.16	PwGroupID	read-write	PW Local Group Id.
INT sleMplsTpPwCfgControlOperMode	1.3.6.1.4.1.6296.101.16.15.1.2.17	INTEGER	read-write	PW Current Operation mode.
VLA sleMplsTpPwCfgControlSvlanId	1.3.6.1.4.1.6296.101.16.15.1.2.18	VlanIdOrAnyOrNone	read-write	PW SVlan. This should be a valid VLAN-ID when sleMplsTpPwCfgOperMode is pwTaggedMode(2).
MPL sleMplsTpPwCfgControlInlabel	1.3.6.1.4.1.6296.101.16.15.1.2.20	MplsLabel	read-write	PW FIB Entry OutLabel.
MPL sleMplsTpPwCfgControlOutLabel	1.3.6.1.4.1.6296.101.16.15.1.2.21	MplsLabel	read-write	PW FIB entry InLabel.
OCT sleMplsTpPwCfgControlTunnelName	1.3.6.1.4.1.6296.101.16.15.1.2.22	OCTET STRING	read-write	PW FIB Entry Tunnel Name.
NUM sleMplsTpPwCfgControlAcInterfaceIndex	1.3.6.1.4.1.6296.101.16.15.1.2.23	InterfaceIndexOrZero	read-write	PW FIB Entry Interface Index.
OCT sleMplsTpPwCfgControlVcStitchName	1.3.6.1.4.1.6296.101.16.15.1.2.24	OCTET STRING	read-write	Multi-segmen PW FIB Entry stitch name.
OCT sleMplsTpPwCfgControlDescription	1.3.6.1.4.1.6296.101.16.15.1.2.26	OCTET STRING	read-write	PW Description.
INT sleMplsTpPwCfgControlPwStatus	1.3.6.1.4.1.6296.101.16.15.1.2.27	INTEGER	read-write	This object is used to set the pw status tlv.
INT sleMplsTpPwCfgControlLocalRefreshTimer	1.3.6.1.4.1.6296.101.16.15.1.2.28	INTEGER	read-write	PW Status Local Refresh Timer.
OCT sleMplsTpPwCfgControlQosServicePolicy	1.3.6.1.4.1.6296.101.16.15.1.2.29	OCTET STRING	read-write	PW qos input service policy.
sleMplsTpPwAcCfg	1.3.6.1.4.1.6296.101.16.15.2
sleMplsTpPwAcCfgInfoTable	1.3.6.1.4.1.6296.101.16.15.2.1		not-accessible	This table specifies information for binding the PW on the MPLS-TP service provider interface.
sleMplsTpPwAcCfgInfoEntry	1.3.6.1.4.1.6296.101.16.15.2.1.1		not-accessible	A row in this table is indexed by sleMplsTpPwIfIndexInfo.
NUM sleMplsTpPwAcCfgInfoIndex	1.3.6.1.4.1.6296.101.16.15.2.1.1.1	InterfaceIndexOrZero	not-accessible	Customer-facing/service-provider Interface Index.
U32 sleMplsTpPwAcCfgInfoLocalAcId	1.3.6.1.4.1.6296.101.16.15.2.1.1.2	Unsigned32	read-only	Local AC Id of MPLS-TP service provider interface.
sleMplsTpPwAcCfgControl	1.3.6.1.4.1.6296.101.16.15.2.2
INT sleMplsTpPwAcCfgControlRequest	1.3.6.1.4.1.6296.101.16.15.2.2.1	INTEGER	read-write	This object holds the possible read-write columns that can be modified in the sleMplsTpPwIfCfg table. For each read-write column of sleMplsTpPwIfCfg table, a Set Operation control value is added in this object.
SLE sleMplsTpPwAcCfgControlStatus	1.3.6.1.4.1.6296.101.16.15.2.2.2	SleControlStatusType	read-only	This object displays the status of the configuration done.
G32 sleMplsTpPwAcCfgControlTimer	1.3.6.1.4.1.6296.101.16.15.2.2.3	Gauge32	read-write	This object is based on the SLE style where a timer is configured for every control table.
TIK sleMplsTpPwAcCfgControlTimestamp	1.3.6.1.4.1.6296.101.16.15.2.2.4	TimeTicks	read-only	This object specifies the time at which the configuration is done.
SLE sleMplsTpPwAcCfgControlReqResult	1.3.6.1.4.1.6296.101.16.15.2.2.5	SleControlRequestResultType	read-only	The standard result of the SET operation is stored here.
NUM sleMplsTpPwAcCfgControlIfIndex	1.3.6.1.4.1.6296.101.16.15.2.2.6	InterfaceIndexOrZero	read-write	Customer-facing/service-provider Interface Index.
U32 sleMplsTpPwAcCfgControlLocalAcId	1.3.6.1.4.1.6296.101.16.15.2.2.7	Unsigned32	read-write	Local AC Id of MPLS-TP service provider interface.
sleMplsTpPwIfCfg	1.3.6.1.4.1.6296.101.16.15.3
sleMplsTpPwIfCfgInfoTable	1.3.6.1.4.1.6296.101.16.15.3.1		not-accessible	This table specifies information for binding the PW on the MPLS-TP service provider interface.
sleMplsTpPwIfCfgInfoEntry	1.3.6.1.4.1.6296.101.16.15.3.1.1		not-accessible	A row in this table is indexed by sleMplsTpPwIfIndexInfo.
NUM sleMplsTpPwIfCfgInfoIndex	1.3.6.1.4.1.6296.101.16.15.3.1.1.1	InterfaceIndexOrZero	not-accessible	Customer-facing/service-provider Interface Index.
OCT sleMplsTpPwIfCfgInfoVcName	1.3.6.1.4.1.6296.101.16.15.3.1.1.2	OCTET STRING	not-accessible	PW Name which bind on interface.
IAN sleMplsTpPwIfCfgInfoServiceType	1.3.6.1.4.1.6296.101.16.15.3.1.1.3	IANAPwTypeTC	read-only	Service Type of PW bind on interface.
VLA sleMplsTpPwIfCfgInfoVlanId	1.3.6.1.4.1.6296.101.16.15.3.1.1.4	VlanIdOrAnyOrNone	read-only	VLAN ID of bind PW. It should have valid value when sleMplsTpPwIfCfgServiceType is ethernetTagged.
INT sleMplsTpPwIfCfgInfoPriority	1.3.6.1.4.1.6296.101.16.15.3.1.1.5	INTEGER	read-only	Priority of bind PW.
VLA sleMplsTpPwIfCfgInfoSVlanId	1.3.6.1.4.1.6296.101.16.15.3.1.1.6	VlanIdOrAnyOrNone	read-only	VLAN ID of bind PW. It should have valid value when sleMplsTpPwIfCfgServiceType is ethernetTagged.
VLA sleMplsTpPwIfCfgInfoInnerVlanId	1.3.6.1.4.1.6296.101.16.15.3.1.1.7	VlanIdOrAnyOrNone	read-only	VLAN ID of bind PW. It should have valid value when sleMplsTpPwIfCfgServiceType is ethernetTagged.
INT sleMplsTpPwIfCfgInfoAction	1.3.6.1.4.1.6296.101.16.15.3.1.1.8	INTEGER	read-only	Action of Pw.
sleMplsTpPwIfCfgControl	1.3.6.1.4.1.6296.101.16.15.3.2
INT sleMplsTpPwIfCfgControlRequest	1.3.6.1.4.1.6296.101.16.15.3.2.1	INTEGER	read-write	This object holds the possible read-write columns that can be modified in the sleMplsTpPwIfCfg table. For each read-write column of sleMplsTpPwIfCfg table, a Set Operation control value is added in this object.
SLE sleMplsTpPwIfCfgControlStatus	1.3.6.1.4.1.6296.101.16.15.3.2.2	SleControlStatusType	read-only	This object displays the status of the configuration done.
G32 sleMplsTpPwIfCfgControlTimer	1.3.6.1.4.1.6296.101.16.15.3.2.3	Gauge32	read-write	This object is based on the SLE style where a timer is configured for every control table.
TIK sleMplsTpPwIfCfgControlTimestamp	1.3.6.1.4.1.6296.101.16.15.3.2.4	TimeTicks	read-only	This object specifies the time at which the configuration is done.
SLE sleMplsTpPwIfCfgControlReqResult	1.3.6.1.4.1.6296.101.16.15.3.2.5	SleControlRequestResultType	read-only	The standard result of the SET operation is stored here.
NUM sleMplsTpPwIfCfgControlIndex	1.3.6.1.4.1.6296.101.16.15.3.2.6	InterfaceIndexOrZero	read-write	Customer-facing/service-provider Interface Index.
OCT sleMplsTpPwIfCfgControlVcName	1.3.6.1.4.1.6296.101.16.15.3.2.7	OCTET STRING	read-write	PW Name which bind on interface.
IAN sleMplsTpPwIfCfgControlServiceType	1.3.6.1.4.1.6296.101.16.15.3.2.8	IANAPwTypeTC	read-write	Service Type of PW bind on interface.
VLA sleMplsTpPwIfCfgControlVlanId	1.3.6.1.4.1.6296.101.16.15.3.2.9	VlanIdOrAnyOrNone	read-write	VLAN ID of bind PW. It should have valid value when sleMplsTpPwIfCfgServiceType is ethernetTagged.
INT sleMplsTpPwIfCfgControlPriority	1.3.6.1.4.1.6296.101.16.15.3.2.10	INTEGER	read-write	Priority of bind PW.
VLA sleMplsTpPwIfCfgControlSVlanId	1.3.6.1.4.1.6296.101.16.15.3.2.11	VlanIdOrAnyOrNone	read-write	VLAN ID of bind PW. It should have valid value when sleMplsTpPwIfCfgServiceType is ethernetTagged.
VLA sleMplsTpPwIfCfgControlInnerVlanId	1.3.6.1.4.1.6296.101.16.15.3.2.12	VlanIdOrAnyOrNone	read-write	VLAN ID of bind PW. It should have valid value when sleMplsTpPwIfCfgServiceType is ethernetTagged.
INT sleMplsTpPwIfCfgControlAction	1.3.6.1.4.1.6296.101.16.15.3.2.13	INTEGER	read-write	Action of Pw.
sleMplsTpMsPwCfg	1.3.6.1.4.1.6296.101.16.15.4
sleMplsTpMsPwCfgInfoTable	1.3.6.1.4.1.6296.101.16.15.4.1		not-accessible	This table specifies information for Multisegment PW.
sleMplsTpMsPwCfgInfoEntry	1.3.6.1.4.1.6296.101.16.15.4.1.1		not-accessible	A row in this table is indexed by sleMplsTpMsPwCfgName.
OCT sleMplsTpMsPwCfgInfoName	1.3.6.1.4.1.6296.101.16.15.4.1.1.1	OCTET STRING	read-only	Multi-segment PW stitch name.
OCT sleMplsTpMsPwCfgInfoSegment1Name	1.3.6.1.4.1.6296.101.16.15.4.1.1.2	OCTET STRING	read-only	PW Segment 1.
OCT sleMplsTpMsPwCfgInfoSegment2Name	1.3.6.1.4.1.6296.101.16.15.4.1.1.3	OCTET STRING	read-only	PW segment 2.
OCT sleMplsTpMsPwCfgInfoDescription	1.3.6.1.4.1.6296.101.16.15.4.1.1.4	OCTET STRING	read-only	Multi-segment stitch description.
INT sleMplsTpMsPwCfgInfoMtu	1.3.6.1.4.1.6296.101.16.15.4.1.1.5	INTEGER	read-only	MTU size. Interface MTU size - needed when one vc is not signaled.
IAN sleMplsTpMsPwCfgInfoServiceType	1.3.6.1.4.1.6296.101.16.15.4.1.1.6	IANAPwTypeTC	read-only	Service type.
VLA sleMplsTpMsPwCfgInfoVlanId	1.3.6.1.4.1.6296.101.16.15.4.1.1.7	VlanIdOrAnyOrNone	read-only	VLAN Id.
sleMplsTpMsPwCfgControl	1.3.6.1.4.1.6296.101.16.15.4.2
INT sleMplsTpMsPwCfgControlRequest	1.3.6.1.4.1.6296.101.16.15.4.2.1	INTEGER	read-write	This object holds the possible read-write columns that can be modified in the sleMplsTpMsPwCfg table. For each read-write column of sleMplsTpMsPwCfg table, a Set Operation control value is added in this object.
SLE sleMplsTpMsPwCfgControlStatus	1.3.6.1.4.1.6296.101.16.15.4.2.2	SleControlStatusType	read-only	This object displays the status of the configuration done.
G32 sleMplsTpMsPwCfgControlTimer	1.3.6.1.4.1.6296.101.16.15.4.2.3	Gauge32	read-write	This object is based on the SLE style where a timer is configured for every control table.
TIK sleMplsTpMsPwCfgControlTimestamp	1.3.6.1.4.1.6296.101.16.15.4.2.4	TimeTicks	read-only	This object specifies the time at which the configuration is done.
SLE sleMplsTpMsPwCfgControlReqResult	1.3.6.1.4.1.6296.101.16.15.4.2.5	SleControlRequestResultType	read-only	The standard result of the SET operation is stored here.
OCT sleMplsTpMsPwCfgControlName	1.3.6.1.4.1.6296.101.16.15.4.2.6	OCTET STRING	read-only	Multi-segment PW stitch name.
OCT sleMplsTpMsPwCfgControlSegment1Name	1.3.6.1.4.1.6296.101.16.15.4.2.7	OCTET STRING	read-only	PW Segment 1.
OCT sleMplsTpMsPwCfgControlSegment2Name	1.3.6.1.4.1.6296.101.16.15.4.2.8	OCTET STRING	read-only	PW Segment 2.
OCT sleMplsTpMsPwCfgControlDescription	1.3.6.1.4.1.6296.101.16.15.4.2.9	OCTET STRING	read-only	Multi-segment stitch description.
INT sleMplsTpMsPwCfgControlMtu	1.3.6.1.4.1.6296.101.16.15.4.2.10	INTEGER	read-only	MTU size. Interface MTU size - needed when one vc is not signaled.
IAN sleMplsTpMsPwCfgControlServiceType	1.3.6.1.4.1.6296.101.16.15.4.2.11	IANAPwTypeTC	read-only	Service Type.
VLA sleMplsTpMsPwCfgControlVlanId	1.3.6.1.4.1.6296.101.16.15.4.2.12	VlanIdOrAnyOrNone	read-only	VLAN Id.

RFC description

Manages MPLS Transport Profile pseudowire operations on DASAN network systems.

Start monitoring DASAN Networks SLE-series OLT/aggregation node, MPLS-TP transport (pseudowire status/traffic) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SLE-MPLS-TP-PW-MIB

What Is SLE-MPLS-TP-PW-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description