DASAN-SMI

All MIBs › DASAN-SMI

Organization: Dasan Co., Ltd.

Last Updated: 2001-04-19

Category: Products/Registration

Description: Defines the Dasan Co., Ltd. enterprise OID structure and SMI registration hierarchy.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DASAN-SMI?

DASAN-SMI is the Structure of Management Information module for Dasan Co., Ltd. (Dasan Zhone, a broadband access equipment vendor), defining the top-level enterprise OID hierarchy, including the dsShe node, under which Dasan's product-specific MIBs register their management objects. It belongs to the broadband access/carrier Ethernet equipment category and, as an SMI module, contains organizational OID assignments rather than pollable instance data. Anyone setting up SNMP polling for Dasan equipment needs the DASAN-SMI MIB file compiled first, since dependent product MIBs reference the OID nodes it establishes. It exposes no interface counters, environmental sensors, or fault traps of its own, so it cannot directly reveal hardware or software status such as uptime, temperature, or CPU load. Its role is as a dependency: Dasan product MIBs covering shelf/chassis (dsShe) and other access equipment build their management trees on top of this root. It is deployed only as a compile-time dependency wherever Dasan broadband access or Ethernet aggregation equipment is SNMP-managed.

IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-SMI. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dasan (Dasan Zhone) broadband access and Ethernet aggregation equipment

Monitoring Examples

The dsShe node establishes an OID subtree presumably used for shelf/chassis-level object registration in Dasan equipment, but this module itself defines no instance-level objects to poll. There is no concrete monitoring scenario for this module directly; actual shelf status, port counters, or alarms would be exposed by Dasan product MIBs registered beneath the dsShe and related nodes. This module is organizational scaffolding rather than a data source.

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY
enterprises

OIDs

OID symbolic	OID numeric	Description
dasan	1.3.6.1.4.1.6296	The Structure of Management Information for the Dasan enterprise.
dasanAdmin	1.3.6.1.4.1.6296.11	dasanAdmin is reserved for administratively assigned OBJECT IDENTIFIERS, i.e. those not associated with MIB objects
dasanAgentCapability	1.3.6.1.4.1.6296.7	dasanAgentCapability provides a root object identifier from which AGENT-CAPABILITIES values may be assigned.
dasanConfig	1.3.6.1.4.1.6296.8	dasanConfig is the main subtree for configuration mibs.
dasanEvents	1.3.6.1.4.1.6296.0	dasanEvents is the root OBJECT IDENTIFIER of EVENTS(or TRAPS). Each EVENT(TRAP) is defined in Each Product MIB file.
dasanExperiment	1.3.6.1.4.1.6296.10	dasanExperiment provides a root object identifier from which experimental mibs may be temporarily based. mibs are typicially based here if they fall in one of two categories 1) are IETF work-in-process mibs which have not been assigned a permanent object identifier by the IANA. 2) are dasan work-in-process which has not been assigned a permanent object identifier by the dasan assigned number authority, typicially because the mib is not ready for deployment. NOTE WELL: support for mibs in the dasanExperiment subtree will be deleted when a permanent object identifier assignment is made.
dasanMgmt	1.3.6.1.4.1.6296.9	dasanMgmt is the main subtree for new mib development.
dasanModules	1.3.6.1.4.1.6296.12	dasanModules provides a root object identifier from which MODULE-IDENTITY values may be assigned.
dasanPartnerProducts	1.3.6.1.4.1.6296.16	dasanPartnerProducts is the root OBJECT IDENTIFIER from which partner sysObjectID values may be assigned. Such sysObjectID values are composed of the dasanPartnerProducts prefix, followed by a single identifier that is unique for each partner, followed by the value of sysObjectID of the dasan product from which partner product is derived. Note that the chassisPartner MIB object defines the value of the identifier assigned to each partner.
dasanPolicy	1.3.6.1.4.1.6296.17	dasanPolicy is the root of the dasan-assigned OID subtree for use with Policy Management.
dasanProducts	1.3.6.1.4.1.6296.1	dasanProducts is the root OBJECT IDENTIFIER from which sysObjectID values are assigned. Actual values are defined in DASAN-PRODUCTS-MIB.
dasanworks	1.3.6.1.4.1.6296.14	dasanworks provides a root object identifier beneath which mibs applicable to the dasanWorks family of network management products are defined.
dsShe	1.3.6.1.4.1.6296.6.2
lightstream	1.3.6.1.4.1.6296.13	subtree reserved for use by Lightstream
local	1.3.6.1.4.1.6296.2	Subtree beneath which pre-10.2 MIBS were built.
newport	1.3.6.1.4.1.6296.15	subtree reserved for use by the former Newport Systems Solutions, now a portion of the Access Business Unit.
otherEnterprises	1.3.6.1.4.1.6296.6	otherEnterprises provides a root object identifier from which mibs produced by other companies may be placed. mibs produced by other enterprises are typicially implemented with the object identifiers as defined in the mib, but if the mib is deemed to be uncontrolled, we may reroot the mib at this subtree in order to have a controlled version.
pakmon	1.3.6.1.4.1.6296.4	reserved for pakmon
sleMgmt	1.3.6.1.4.1.6296.101	SLE Mgmt.
sleV2Mgmt	1.3.6.1.4.1.6296.102	sleV2Management.
temporary	1.3.6.1.4.1.6296.3	Subtree beneath which pre-10.2 experiments were placed.
workgroup	1.3.6.1.4.1.6296.5	subtree reserved for use by the Workgroup Business Unit

RFC description

Dasan enterprise root MIB defining the structure and OID branches for network equipment like routers, switches, and ADSL/VDSL access devices.

Start monitoring Dasan (Dasan Zhone) broadband access/Ethernet aggregation equipment (OID root) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DASAN-SMI

What Is DASAN-SMI?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description