SCA-MPLINK-MIB

All MIBs › SCA-MPLINK-MIB

Category: Securicor WAN Router Management, WAN and Routing

Description: Manages Securicor WAN router multipoint link configuration and circuit aggregation.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SCA-MPLINK-MIB?

SCA-MPLINK-MIB is a Securicor/Intel-era vendor MIB (1997) for managing multipoint WAN links on Securicor SCANET routers, modeling logical "services" plus their LAN- and WAN-specific link parameters. It defines serviceTable (serviceName, serviceType, slot, plug, serviceState, byte/packet counters) as the top-level service inventory, lanTable for LAN-side addressing (ownSNPAAddress, scaNetSubnet, access masks), and wanTable/poolTable for WAN circuit state (actualCallState, actualCallDirection, callsPlaced/callsFailed counters, dataCompressionSwitch/State, queue thresholds, backup link/pool configuration). It exposes both configuration (compression, reverse-charge, time-cut policies) and operational counters (bytes/packets sent/received, call attempts/failures) for multipoint WAN circuit aggregation. Because it predates modern textual conventions (using RFC1155-SMI/RFC-1212 types), it is tied to legacy SCANET-based multipoint link hardware. It is deployed on Securicor WAN routers aggregating multiple point-to-point or dial circuits into pooled links, and administrators can download the SCA-MPLINK-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SCA-MPLINK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Securicor SCANET multipoint WAN routers

Monitoring Examples

An operator polls wanEntry's actualCallState and callsFailed1 counter for a given serviceNumber3 to confirm a pooled WAN circuit is up(7) and not repeatedly failing; a rising callsFailed1 count alongside actualCallState reporting down(4) would indicate a multipoint link failing to establish, degrading the aggregated pool's capacity.

What Can Be Monitored

service state and byte/packet counters
WAN call state and direction
calls placed/failed counters
data compression switch/state
circuit pool size and free links

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
TimeTicks

From RFC1213-MIB

DisplayString

From SCANET-MIB

scanet

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access
OFF acceptIncomingCalls1	1.3.6.1.4.1.208.24.3.1.1.8	OffOn	read-write
OFF acceptIncomingCalls2	1.3.6.1.4.1.208.24.3.2.1.5	OffOn	read-write
OFF acceptReverseCharge1	1.3.6.1.4.1.208.24.3.1.1.10	OffOn	read-write
OFF acceptReverseCharge2	1.3.6.1.4.1.208.24.3.2.1.7	OffOn	read-write
INT actualCallDirection	1.3.6.1.4.1.208.24.3.1.1.15	INTEGER	read-only
INT actualCallDuration	1.3.6.1.4.1.208.24.3.1.1.16	INTEGER	read-only
INT actualCallState	1.3.6.1.4.1.208.24.3.1.1.14	INTEGER	read-only
CTR actualErrorRetries	1.3.6.1.4.1.208.24.3.1.1.26	Counter	read-only
INT actualTimer	1.3.6.1.4.1.208.24.3.1.1.19	INTEGER	read-only
INT backupForLink	1.3.6.1.4.1.208.24.3.1.1.31	INTEGER	read-write
OFF backupOnly	1.3.6.1.4.1.208.24.3.1.1.13	OffOn	read-write
CTR bytesReceived	1.3.6.1.4.1.208.24.1.1.1.8	Counter	read-only
CTR bytesSent	1.3.6.1.4.1.208.24.1.1.1.7	Counter	read-only
CTR callsFailed1	1.3.6.1.4.1.208.24.3.1.1.25	Counter	read-only
CTR callsFailed2	1.3.6.1.4.1.208.24.3.2.1.15	Counter	read-only
CTR callsPlaced1	1.3.6.1.4.1.208.24.3.1.1.24	Counter	read-only
CTR callsPlaced2	1.3.6.1.4.1.208.24.3.2.1.14	Counter	read-only
OFF dataCompressionState	1.3.6.1.4.1.208.24.3.1.1.7	OffOn	read-only
OFF dataCompressionSwitch1	1.3.6.1.4.1.208.24.3.1.1.6	OffOn	read-write
OFF dataCompressionSwitch2	1.3.6.1.4.1.208.24.3.2.1.4	OffOn	read-write
INT errorRetryInterval1	1.3.6.1.4.1.208.24.3.1.1.28	INTEGER	read-write
INT errorRetryInterval2	1.3.6.1.4.1.208.24.3.2.1.17	INTEGER	read-write
INT freeLinks	1.3.6.1.4.1.208.24.3.2.1.21	INTEGER	read-only
INT idleTime1	1.3.6.1.4.1.208.24.3.1.1.18	INTEGER	read-write
INT idleTime2	1.3.6.1.4.1.208.24.3.2.1.11	INTEGER	read-write
OCT incomingAccessMask1	1.3.6.1.4.1.208.24.2.1.1.4	OCTET STRING	read-write
OCT incomingAccessMask2	1.3.6.1.4.1.208.24.3.1.1.33	OCTET STRING	read-write
OCT incomingAccessMask3	1.3.6.1.4.1.208.24.3.2.1.22	OCTET STRING	read-write
lanEntry	1.3.6.1.4.1.208.24.2.1.1		not-accessible
lanSpecific	1.3.6.1.4.1.208.24.2
lanTable	1.3.6.1.4.1.208.24.2.1		not-accessible
INT maxCallSetupTime1	1.3.6.1.4.1.208.24.3.1.1.29	INTEGER	read-write
INT maxCallSetupTime2	1.3.6.1.4.1.208.24.3.2.1.18	INTEGER	read-write
INT maxErrorRetries1	1.3.6.1.4.1.208.24.3.1.1.27	INTEGER	read-write
INT maxErrorRetries2	1.3.6.1.4.1.208.24.3.2.1.16	INTEGER	read-write
INT maxPacketSize	1.3.6.1.4.1.208.24.1.1.1.11	INTEGER	read-only
INT minCallDuration1	1.3.6.1.4.1.208.24.3.1.1.17	INTEGER	read-write
INT minCallDuration2	1.3.6.1.4.1.208.24.3.2.1.10	INTEGER	read-write
TIK mostRecentFailure1	1.3.6.1.4.1.208.24.3.1.1.30	TimeTicks	read-only
TIK mostRecentFailure2	1.3.6.1.4.1.208.24.3.2.1.19	TimeTicks	read-only
mplk	1.3.6.1.4.1.208.24
OCT outgoingAccessMask1	1.3.6.1.4.1.208.24.2.1.1.5	OCTET STRING	read-write
OCT outgoingAccessMask2	1.3.6.1.4.1.208.24.3.1.1.34	OCTET STRING	read-write
OCT outgoingAccessMask3	1.3.6.1.4.1.208.24.3.2.1.23	OCTET STRING	read-write
OCT ownSNPAAddress	1.3.6.1.4.1.208.24.2.1.1.2	OCTET STRING	read-only
INT ownUserDataAddress1	1.3.6.1.4.1.208.24.3.1.1.21	INTEGER	read-write
INT ownUserDataAddress2	1.3.6.1.4.1.208.24.3.2.1.13	INTEGER	read-write
CTR packetsReceived	1.3.6.1.4.1.208.24.1.1.1.10	Counter	read-only
CTR packetsSent	1.3.6.1.4.1.208.24.1.1.1.9	Counter	read-only
OFF permitOutgoingCalls1	1.3.6.1.4.1.208.24.3.1.1.9	OffOn	read-write
OFF permitOutgoingCalls2	1.3.6.1.4.1.208.24.3.2.1.6	OffOn	read-write
OFF permitTimeCut1	1.3.6.1.4.1.208.24.3.1.1.12	OffOn	read-write
OFF permitTimeCut2	1.3.6.1.4.1.208.24.3.2.1.9	OffOn	read-write
INT plug	1.3.6.1.4.1.208.24.1.1.1.5	INTEGER	read-only
poolEntry	1.3.6.1.4.1.208.24.3.2.1		not-accessible
INT poolIndex	1.3.6.1.4.1.208.24.3.1.1.32	INTEGER	read-write
STR poolName	1.3.6.1.4.1.208.24.3.2.1.2	DisplayString	read-only
INT poolSize	1.3.6.1.4.1.208.24.3.2.1.20	INTEGER	read-only
poolTable	1.3.6.1.4.1.208.24.3.2		not-accessible
OFF proposeReverseCharge1	1.3.6.1.4.1.208.24.3.1.1.11	OffOn	read-write
OFF proposeReverseCharge2	1.3.6.1.4.1.208.24.3.2.1.8	OffOn	read-write
INT provider	1.3.6.1.4.1.208.24.3.1.1.2	INTEGER	read-only
INT queueActualValue	1.3.6.1.4.1.208.24.3.1.1.3	INTEGER	read-only
INT queueHighWaterTideMark	1.3.6.1.4.1.208.24.3.1.1.4	INTEGER	read-only
INT queueRejectThreshold1	1.3.6.1.4.1.208.24.3.1.1.5	INTEGER	read-write
INT queueRejectThreshold2	1.3.6.1.4.1.208.24.3.2.1.3	INTEGER	read-write
OCT remoteSNPAaddress	1.3.6.1.4.1.208.24.3.1.1.22	OCTET STRING	read-write
INT remoteUserDataAddress	1.3.6.1.4.1.208.24.3.1.1.23	INTEGER	read-write
INT reserveTime1	1.3.6.1.4.1.208.24.3.1.1.20	INTEGER	read-only
INT reserveTime2	1.3.6.1.4.1.208.24.3.2.1.12	INTEGER	read-write
INT scaNetSubnet	1.3.6.1.4.1.208.24.2.1.1.3	INTEGER	read-only
service	1.3.6.1.4.1.208.24.1
serviceEntry	1.3.6.1.4.1.208.24.1.1.1		not-accessible
STR serviceName	1.3.6.1.4.1.208.24.1.1.1.2	DisplayString	read-only
INT serviceNumber1	1.3.6.1.4.1.208.24.1.1.1.1	INTEGER	read-only
INT serviceNumber2	1.3.6.1.4.1.208.24.2.1.1.1	INTEGER	read-only
INT serviceNumber3	1.3.6.1.4.1.208.24.3.1.1.1	INTEGER	read-only
INT serviceNumber4	1.3.6.1.4.1.208.24.3.2.1.1	INTEGER	read-only
INT serviceState	1.3.6.1.4.1.208.24.1.1.1.6	INTEGER	read-only
serviceTable	1.3.6.1.4.1.208.24.1.1		not-accessible
INT serviceType	1.3.6.1.4.1.208.24.1.1.1.3	INTEGER	read-only
INT slot	1.3.6.1.4.1.208.24.1.1.1.4	INTEGER	read-only
OCT timecutAccessMask1	1.3.6.1.4.1.208.24.3.1.1.35	OCTET STRING	read-write
OCT timecutAccessMask2	1.3.6.1.4.1.208.24.3.2.1.24	OCTET STRING	read-write
wanEntry	1.3.6.1.4.1.208.24.3.1.1		not-accessible
wanSpecific	1.3.6.1.4.1.208.24.3
wanTable	1.3.6.1.4.1.208.24.3.1		not-accessible

RFC description

Intel multi-protocol link service management including LAN and WAN-specific configuration.

Start monitoring Securicor SCANET multipoint WAN routers (multipoint service/LAN/WAN link configuration and counters) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SCA-MPLINK-MIB

What Is SCA-MPLINK-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description