All MIBs › SCA-MPLINK-MIB › queueRejectThreshold1

queueRejectThreshold1

OID (symbolic): SCA-MPLINK-MIB::queueRejectThreshold1

OID (numeric): 1.3.6.1.4.1.208.24.3.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

What is queueRejectThreshold1?

The transmit-queue depth on this WAN link above which new traffic is rejected rather than queued. Admins tune it to control how much buffering the link tolerates before shedding load, balancing latency against drops.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.24.3.1.1.5
snmpwalk -v2c -c public <target> SCA-MPLINK-MIB::queueRejectThreshold1

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.208.24.3.1.1.5.1
snmpget -v2c -c public <target> SCA-MPLINK-MIB::queueRejectThreshold1.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.208.24.3.1.1.5.1 i <value>

Start monitoring Securicor SCANET multipoint WAN routers (multipoint service/LAN/WAN link configuration and counters) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SCA-MPLINK-MIB::queueRejectThreshold1 OID value, configure state conditions and alerts, and monitor any Securicor SCANET multipoint WAN routers (multipoint service/LAN/WAN link configuration and counters) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.208	scanet	SCANET-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.208.24	mplk	SCA-MPLINK-MIB
1.3.6.1.4.1.208.24.3	wanSpecific	SCA-MPLINK-MIB
1.3.6.1.4.1.208.24.3.1	wanTable	SCA-MPLINK-MIB
1.3.6.1.4.1.208.24.3.1.1	wanEntry	SCA-MPLINK-MIB
1.3.6.1.4.1.208.24.3.1.1.5	queueRejectThreshold1	SCA-MPLINK-MIB

SCA-MPLINK-MIB :: queueRejectThreshold1

queueRejectThreshold1

Module

This MIB depends on