All MIBs › SCA-BOX-MIB › brdLed
brdLed
Module: SCA-BOX-MIB
OID (symbolic): SCA-BOX-MIB::brdLed
OID (numeric): 1.3.6.1.4.1.208.3.2.2.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Depends on the card type.
Note. Lower 3 bits indicates off/color (off(0),red(1), green(2),yellow(4)), Higher 5 bits reserved for flash frequency.
What is brdLed?
Reports the state of this board's own LED(s) as a raw byte whose meaning depends on the card type; as with the enclosure-level 'led' object, the lower 3 bits typically encode off/red/green/yellow and the upper 5 bits encode flash frequency.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.3.2.2.1.3 snmpwalk -v2c -c public <target> SCA-BOX-MIB::brdLed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.208.3.2.2.1.3.1 snmpget -v2c -c public <target> SCA-BOX-MIB::brdLed.1
Start monitoring legacy chassis equipment, SCANET-MIB vendor line (fan/power/temperature/card-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SCA-BOX-MIB::brdLed OID value, configure state conditions and alerts, and monitor any legacy chassis equipment, SCANET-MIB vendor line (fan/power/temperature/card-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.208 | scanet | SCANET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.208.3 | box | SCA-BOX-MIB |
| 1.3.6.1.4.1.208.3.2 | boards | SCA-BOX-MIB |
| 1.3.6.1.4.1.208.3.2.2 | brdStatusTable | SCA-BOX-MIB |
| 1.3.6.1.4.1.208.3.2.2.1 | brdStatusEntry | SCA-BOX-MIB |
| 1.3.6.1.4.1.208.3.2.2.1.3 | brdLed | SCA-BOX-MIB |