SCA-IPX-MIB

All MIBs › SCA-IPX-MIB

Category: Securicor WAN Router Management, WAN and Routing

Description: Manages Securicor Arisoft WAN router IPX routing configuration and network reachability.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SCA-IPX-MIB?

SCA-IPX-MIB is a proprietary MIB from Securicor Arisoft, covering IPX (Internetwork Packet Exchange, Novell's legacy routed protocol) routing and traffic statistics on Securicor Arisoft WAN routers. It exposes per-router counters for IPX traffic flow: transmitted and received packets (total, multicast, broadcast), forwarded and locally-destined packets, and error conditions like filtered, unknown, discarded, or checksum-failed packets. Its main use is performance and fault monitoring of the IPX routing function — administrators can spot traffic anomalies, packet loss, or protocol errors indicating a misbehaving IPX network segment or routing misconfiguration. It parallels the general spirit of IETF IPX MIB work but is independently defined for this vendor's routers. It would have been deployed in WAN environments during the era when Novell NetWare/IPX was a common enterprise LAN protocol requiring routing across serial/WAN links. Engineers can download the SCA-IPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SCA-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Securicor Arisoft WAN routers

Monitoring Examples

An operator would compare ipxCntRxTotal against ipxCntBadChksum and ipxCntDiscarded to determine what fraction of received IPX traffic is being dropped due to corruption, and compare ipxCntForward with ipxCntFiltered to see how much traffic is being blocked by filtering policy versus successfully routed. A spike in ipxCntUnknown alongside a steady ipxCntRxTotal would suggest IPX traffic destined for unrecognized networks, hinting at a routing table or SAP configuration problem.

What Can Be Monitored

IPX transmit/receive packet counts
multicast/broadcast IPX traffic
forwarded vs. filtered/discarded packets
checksum error counts

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
TimeTicks

From RFC1213-MIB

DisplayString

From SCANET-MIB

scanet

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
ipx	1.3.6.1.4.1.208.25
ipxCounters	1.3.6.1.4.1.208.25.1
CTR ipxCntTxTotal	1.3.6.1.4.1.208.25.1.1	Counter	read-only	Total number of transmitted IPX packets.
CTR ipxCntTxMcast	1.3.6.1.4.1.208.25.1.2	Counter	read-only	Total number of transmitted multicast IPX packets.
CTR ipxCntTxBcast	1.3.6.1.4.1.208.25.1.3	Counter	read-only	Total number of transmitted broadcast IPX packets.
CTR ipxCntRxTotal	1.3.6.1.4.1.208.25.1.4	Counter	read-only	Total number of received IPX packets.
CTR ipxCntRxMcast	1.3.6.1.4.1.208.25.1.5	Counter	read-only	Total number of received multicast IPX packets.
CTR ipxCntRxBcast	1.3.6.1.4.1.208.25.1.6	Counter	read-only	Total number of received broadcast IPX packets.
CTR ipxCntForward	1.3.6.1.4.1.208.25.1.7	Counter	read-only	Total number of IPX packets forwarded.
CTR ipxCntFiltered	1.3.6.1.4.1.208.25.1.8	Counter	read-only	Total number of IPX packets dropped due to filtering.
CTR ipxCntLocal	1.3.6.1.4.1.208.25.1.9	Counter	read-only	Total number of IPX packets to this router.
CTR ipxCntUnknown	1.3.6.1.4.1.208.25.1.10	Counter	read-only	Total number of unknown IPX input packets.
CTR ipxCntDiscarded	1.3.6.1.4.1.208.25.1.11	Counter	read-only	Total number of discarded IPX packets.
CTR ipxCntBadChksum	1.3.6.1.4.1.208.25.1.12	Counter	read-only	Total number of IPX packets with bad checksum.
CTR ipxCntBadLen	1.3.6.1.4.1.208.25.1.13	Counter	read-only	Total number of IPX packets with bad length.
CTR ipxCntBadHop	1.3.6.1.4.1.208.25.1.14	Counter	read-only	Total number of IPX packets that have exceeded the maximum hop count.
CTR ipxCntNoRoute	1.3.6.1.4.1.208.25.1.15	Counter	read-only	Total number of IPX packets dropped due to unknown net number.
CTR ipxCntTooBig	1.3.6.1.4.1.208.25.1.16	Counter	read-only	Total number of too big IPX packets.
CTR ipxCntRxSapReq	1.3.6.1.4.1.208.25.1.17	Counter	read-only	Total number of IPX SAP request packets received.
CTR ipxRxCntSapRsp	1.3.6.1.4.1.208.25.1.18	Counter	read-only	Total number of IPX SAP response packets received.
CTR ipxTxCntSapReq	1.3.6.1.4.1.208.25.1.19	Counter	read-only	Total number of IPX SAP request packets transmitted.
CTR ipxCntTxSapRpl	1.3.6.1.4.1.208.25.1.20	Counter	read-only	Total number of IPX SAP reply packets transmitted.
CTR ipxCntSapInvalid	1.3.6.1.4.1.208.25.1.21	Counter	read-only	Total number of invalid IPX SAP request packets.
CTR ipxCntRxRipReq	1.3.6.1.4.1.208.25.1.22	Counter	read-only	Total number of IPX RIP request packets received.
CTR ipxCntRxRipRsp	1.3.6.1.4.1.208.25.1.23	Counter	read-only	Total number of IPX RIP response packets received.
CTR ipxCntTxRipReq	1.3.6.1.4.1.208.25.1.24	Counter	read-only	Total number of IPX RIP request packets transmitted.
CTR ipxCntTxRipRpl	1.3.6.1.4.1.208.25.1.25	Counter	read-only	Total number of IPX RIP reply packets transmitted.
CTR ipxCntRipInvalid	1.3.6.1.4.1.208.25.1.26	Counter	read-only	Total number of invalid IPX RIP request packets.
CTR ipxCntTxFailed	1.3.6.1.4.1.208.25.1.27	Counter	read-only	Total number of packets that could not be transmitted.
CTR ipxCntTxPrefFailed	1.3.6.1.4.1.208.25.1.28	Counter	read-only	Total number of packets that could not be transmitted prefered.
CTR ipxCntRxFiltered	1.3.6.1.4.1.208.25.1.29	Counter	read-only	Total number of received packets that were filtered.
CTR ipxCntTxFiltered	1.3.6.1.4.1.208.25.1.30	Counter	read-only	Total number of packets to be transmitted that were filtered.
CTR ipxCntForwarded	1.3.6.1.4.1.208.25.1.31	Counter	read-only	Total number of packets sent that were received on another interface.
CTR ipxCntCacheHits	1.3.6.1.4.1.208.25.1.32	Counter	read-only	Total number of packets that were cache forwarded.
CTR ipxCntSpoofed	1.3.6.1.4.1.208.25.1.33	Counter	read-only	Total number of watchdog packets and SPX packets spoofed.
CTR ipxCntSPXCacheHits	1.3.6.1.4.1.208.25.1.34	Counter	read-only	Total number of hits in the SPX Cache Spoofing Table.
CTR ipxCntRxType20	1.3.6.1.4.1.208.25.1.35	Counter	read-only	Total number of Type 20 propagation packet received.
CTR ipxCntTxType20	1.3.6.1.4.1.208.25.1.36	Counter	read-only	Total number of Type 20 propagation packet transmitted.
CTR ipxCntType20Disc	1.3.6.1.4.1.208.25.1.37	Counter	read-only	Total number of Type 20 propagation packet discarded.
TIK ipxCntConfigTimeStamp	1.3.6.1.4.1.208.25.1.38	TimeTicks	read-only	Last configuration time in time ticks.
ipxSAP	1.3.6.1.4.1.208.25.2
ipxSAPTable	1.3.6.1.4.1.208.25.2.1		not-accessible	Server information table
ipxSAPEntry	1.3.6.1.4.1.208.25.2.1.1		not-accessible
OCT ipxSAPServerNet	1.3.6.1.4.1.208.25.2.1.1.1	OCTET STRING	read-only	Server net.
OCT ipxSAPServerNode	1.3.6.1.4.1.208.25.2.1.1.2	OCTET STRING	read-only	Server node.
OCT ipxSAPServerSocket	1.3.6.1.4.1.208.25.2.1.1.3	OCTET STRING	read-only	Server socket.
INT ipxSAPServerType	1.3.6.1.4.1.208.25.2.1.1.4	INTEGER	read-only	Server type.
STR ipxSAPServerName	1.3.6.1.4.1.208.25.2.1.1.5	DisplayString	read-only	Server name.
INT ipxSAPhops	1.3.6.1.4.1.208.25.2.1.1.6	INTEGER	read-only	Number of hops to server.
ipxRIP	1.3.6.1.4.1.208.25.3
ipxRIPTable	1.3.6.1.4.1.208.25.3.1		not-accessible	Routing information table
ipxRIPEntry	1.3.6.1.4.1.208.25.3.1.1		not-accessible
OCT ipxRIPnet	1.3.6.1.4.1.208.25.3.1.1.1	OCTET STRING	read-only	Remote net address.
OCT ipxRIPRouterNet	1.3.6.1.4.1.208.25.3.1.1.2	OCTET STRING	read-only	Announcing router net.
OCT ipxRIPRouterNode	1.3.6.1.4.1.208.25.3.1.1.3	OCTET STRING	read-only	Announcing router node.
OCT ipxRIPRouterSocket	1.3.6.1.4.1.208.25.3.1.1.4	OCTET STRING	read-only	Announcing router socket.
INT ipxRIPhops	1.3.6.1.4.1.208.25.3.1.1.5	INTEGER	read-only	Number of hops to remote net.
INT ipxRIPdelay	1.3.6.1.4.1.208.25.3.1.1.6	INTEGER	read-only	Delay in ticks to remote net.
ipxLink	1.3.6.1.4.1.208.25.4
ipxLinkTable	1.3.6.1.4.1.208.25.4.1		not-accessible	This table contains link-specific counters and setup
ipxLinkEntry	1.3.6.1.4.1.208.25.4.1.1		not-accessible
INT ipxLinkNet	1.3.6.1.4.1.208.25.4.1.1.1	INTEGER	read-only	IPX net number.
INT ipxLinkIndex	1.3.6.1.4.1.208.25.4.1.1.2	INTEGER	read-only	Link index.
INT ipxLinkFrameType	1.3.6.1.4.1.208.25.4.1.1.3	INTEGER	read-only	Frame type.
OCT ipxLinkFrameParam	1.3.6.1.4.1.208.25.4.1.1.4	OCTET STRING	read-only	Parameters for frame.
INT ipxLinkState	1.3.6.1.4.1.208.25.4.1.1.5	INTEGER	read-only	Link status. (1=down, 2=up)
TIK ipxLinkRIPTimer	1.3.6.1.4.1.208.25.4.1.1.6	TimeTicks	read-write	Time between RIP updates in timeticks (1 timetick=10ms).
INT ipxLinkRIPTrigger	1.3.6.1.4.1.208.25.4.1.1.7	INTEGER	read-only	Use triggered RIP updates. (1=no, 2=yes)
TIK ipxLinkSAPTimer	1.3.6.1.4.1.208.25.4.1.1.8	TimeTicks	read-write	Time between SAP updates in timeticks (1 timetick=10ms).
INT ipxLinkSAPTrigger	1.3.6.1.4.1.208.25.4.1.1.9	INTEGER	read-only	Use triggered SAP updates. (1=no, 2=yes)
CTR ipxLinkCntTxTotal	1.3.6.1.4.1.208.25.4.1.1.10	Counter	read-only	Number of transmitted IPX packets.
CTR ipxLinkCntTxMcast	1.3.6.1.4.1.208.25.4.1.1.11	Counter	read-only	Number of transmitted multicast IPX packets.
CTR ipxLinkCntTxBcast	1.3.6.1.4.1.208.25.4.1.1.12	Counter	read-only	Number of transmitted broadcast IPX packets.
CTR ipxLinkCntRxTotal	1.3.6.1.4.1.208.25.4.1.1.13	Counter	read-only	Number of received IPX packets.
CTR ipxLinkCntRxMcast	1.3.6.1.4.1.208.25.4.1.1.14	Counter	read-only	Number of received multicast IPX packets.
CTR ipxLinkCntRxBcast	1.3.6.1.4.1.208.25.4.1.1.15	Counter	read-only	Number of received broadcast IPX packets.
CTR ipxLinkCntForward	1.3.6.1.4.1.208.25.4.1.1.16	Counter	read-only	Number of IPX packets forwarded.
CTR ipxLinkCntFiltered	1.3.6.1.4.1.208.25.4.1.1.17	Counter	read-only	Number of IPX packets dropped due to filtering.
CTR ipxLinkCntLocal	1.3.6.1.4.1.208.25.4.1.1.18	Counter	read-only	Number of IPX packets to this router.
CTR ipxLinkCntUnknown	1.3.6.1.4.1.208.25.4.1.1.19	Counter	read-only	Number of unknown IPX input packets.
CTR ipxLinkCntDiscarded	1.3.6.1.4.1.208.25.4.1.1.20	Counter	read-only	Number of discarded IPX packets.
CTR ipxLinkCntBadChksum	1.3.6.1.4.1.208.25.4.1.1.21	Counter	read-only	Number of IPX packets with bad checksum.
CTR ipxLinkCntBadLen	1.3.6.1.4.1.208.25.4.1.1.22	Counter	read-only	Number of IPX packets with bad length.
CTR ipxLinkCntBadHop	1.3.6.1.4.1.208.25.4.1.1.23	Counter	read-only	Number of IPX packets that have exceeded the maximum hop count.
CTR ipxLinkCntNoRoute	1.3.6.1.4.1.208.25.4.1.1.24	Counter	read-only	Number of IPX packets dropped due to unknown net number.
CTR ipxLinkCntTooBig	1.3.6.1.4.1.208.25.4.1.1.25	Counter	read-only	Number of too big IPX packets.
CTR ipxLinkCntRxSapReq	1.3.6.1.4.1.208.25.4.1.1.26	Counter	read-only	Number of IPX SAP request packets received.
CTR ipxLinkCntRxSapRsp	1.3.6.1.4.1.208.25.4.1.1.27	Counter	read-only	Number of IPX SAP response packets received.
CTR ipxLinkCntTxSapReq	1.3.6.1.4.1.208.25.4.1.1.28	Counter	read-only	Number of IPX SAP request packets transmitted.
CTR ipxLinkCntTxSapRpl	1.3.6.1.4.1.208.25.4.1.1.29	Counter	read-only	Number of IPX SAP reply packets transmitted.
CTR ipxLinkCntSapInvalid	1.3.6.1.4.1.208.25.4.1.1.30	Counter	read-only	Number of invalid IPX SAP request packets.
CTR ipxLinkCntRxRipReq	1.3.6.1.4.1.208.25.4.1.1.31	Counter	read-only	Number of IPX RIP request packets received.
CTR ipxLinkCntRxRipRsp	1.3.6.1.4.1.208.25.4.1.1.32	Counter	read-only	Number of IPX RIP response packets received.
CTR ipxLinkCntTxRipReq	1.3.6.1.4.1.208.25.4.1.1.33	Counter	read-only	Number of IPX RIP request packets transmitted.
CTR ipxLinkCntTxRipRpl	1.3.6.1.4.1.208.25.4.1.1.34	Counter	read-only	Number of IPX RIP reply packets transmitted.
CTR ipxLinkCntRipInvalid	1.3.6.1.4.1.208.25.4.1.1.35	Counter	read-only	Number of invalid IPX RIP request packets.
CTR ipxLinkTxFailed	1.3.6.1.4.1.208.25.4.1.1.36	Counter	read-only	Number of packets that could not be transmitted.
CTR ipxLinkTxPrefFailed	1.3.6.1.4.1.208.25.4.1.1.37	Counter	read-only	Number of packets that could not be transmitted prefered.
CTR ipxLinkRxFiltered	1.3.6.1.4.1.208.25.4.1.1.38	Counter	read-only	Number of received packets that were filtered.
CTR ipxLinkTxFiltered	1.3.6.1.4.1.208.25.4.1.1.39	Counter	read-only	Number of packets to be transmitted that were filtered.
CTR ipxLinkForwarded	1.3.6.1.4.1.208.25.4.1.1.40	Counter	read-only	Number of packets sent that were received on another interface.
CTR ipxLinkCacheHits	1.3.6.1.4.1.208.25.4.1.1.41	Counter	read-only	Number of packets that were cache forwarded.
CTR ipxLinkSpoofed	1.3.6.1.4.1.208.25.4.1.1.42	Counter	read-only	Number of Watchdog packets and SPX packets spoofed.
CTR ipxLinkSPXCacheHits	1.3.6.1.4.1.208.25.4.1.1.43	Counter	read-only	Number of cache hits in SPX Spoofing Table.
CTR ipxLinkType20Rx	1.3.6.1.4.1.208.25.4.1.1.44	Counter	read-only	Number of Type 20 Propagation packets received.
CTR ipxLinkType20Tx	1.3.6.1.4.1.208.25.4.1.1.45	Counter	read-only	Number of Type 20 Propagation packets transmitted.
CTR ipxLinkType20Disc	1.3.6.1.4.1.208.25.4.1.1.46	Counter	read-only	Number of Type 20 Propagation discarded.
CTR ipxLinkRxBytesOther	1.3.6.1.4.1.208.25.4.1.1.47	Counter	read-only	Number of bytes received of unknown types.
CTR ipxLinkRxBytesNCP	1.3.6.1.4.1.208.25.4.1.1.48	Counter	read-only	Number of NCP bytes received.
CTR ipxLinkRxBytesSPX	1.3.6.1.4.1.208.25.4.1.1.49	Counter	read-only	Number of SPX bytes received.
CTR ipxLinkRxBytesNetbios	1.3.6.1.4.1.208.25.4.1.1.50	Counter	read-only	Number of NetBios bytes received.
CTR ipxLinkRxBytesRIP	1.3.6.1.4.1.208.25.4.1.1.51	Counter	read-only	Number of RIP bytes received.
CTR ipxLinkRxBytesSAP	1.3.6.1.4.1.208.25.4.1.1.52	Counter	read-only	Number of SAP bytes received.
CTR ipxLinkRxBytesType20	1.3.6.1.4.1.208.25.4.1.1.53	Counter	read-only	Number of Type 20 bytes received.
CTR ipxLinkTxBytesOther	1.3.6.1.4.1.208.25.4.1.1.54	Counter	read-only	Number of bytes transmitted of unknown types.
CTR ipxLinkTxBytesNCP	1.3.6.1.4.1.208.25.4.1.1.55	Counter	read-only	Number of NCP bytes transmitted.
CTR ipxLinkTxBytesSPX	1.3.6.1.4.1.208.25.4.1.1.56	Counter	read-only	Number of SPX bytes transmitted.
CTR ipxLinkTxBytesNetbios	1.3.6.1.4.1.208.25.4.1.1.57	Counter	read-only	Number of NetBios bytes transmitted.
CTR ipxLinkTxBytesRIP	1.3.6.1.4.1.208.25.4.1.1.58	Counter	read-only	Number of RIP bytes transmitted.
CTR ipxLinkTxBytesSAP	1.3.6.1.4.1.208.25.4.1.1.59	Counter	read-only	Number of SAP bytes transmitted.
CTR ipxLinkTxBytesType20	1.3.6.1.4.1.208.25.4.1.1.60	Counter	read-only	Number of Type 20 bytes transmitted.
CTR ipxLinkRxBytesTotal	1.3.6.1.4.1.208.25.4.1.1.61	Counter	read-only	Number of bytes received in total for link.
CTR ipxLinkTxBytesTotal	1.3.6.1.4.1.208.25.4.1.1.62	Counter	read-only	Number of bytes transmitted in total for link.
ipxControl	1.3.6.1.4.1.208.25.5
INT ipxControlCommand	1.3.6.1.4.1.208.25.5.1	INTEGER	read-write	Control register : - Write 1 to flush routing table. - Write 2 to update RIP & SAP tables.

RFC description

SCA vendor-private MIB for managing IPX (Internetwork Packet Exchange) protocol protocol stack configuration and operation on legacy networks.

Start monitoring Securicor Arisoft WAN routers (IPX routing traffic statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SCA-IPX-MIB

What Is SCA-IPX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description