SAF-IPRADIO

All MIBs › SAF-IPRADIO

Category: Microwave Radio - SAF Tehnika, SAF Tehnika Microwave

Description: Manages SAF Tehnika IP radio link parameters, modulation, and transport configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SAF-IPRADIO?

SAF-IPRADIO is a vendor-specific MIB from SAF Tehnika, covering their IP-based microwave radio link products used for point-to-point wireless backhaul transport. It exposes a mix of device identification (product, radioName), configuration (license, licenseMask, loopback and loopback-tributary settings), and environmental/operational data such as system temperature and system date/time. It is explicitly useful for monitoring hardware status, most notably device temperature (sysTemperature) for thermal health, license/feature enablement, and administrative actions like configuration writes (writeConfig) and remote CPU restarts (restartcpu). No dependency on other MIBs is evident from the available data, so it appears to be a largely self-contained enterprise MIB. It is typically deployed by telecom/wireless-backhaul operators monitoring outdoor microwave radio terminals for link quality, thermal stress, and licensing compliance. Engineers can download the SAF-IPRADIO file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SAF-IPRADIO. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SAF Tehnika IP microwave radio
point-to-point wireless backhaul radio terminal

Monitoring Examples

An administrator would poll sysTemperature on a SAF Tehnika radio unit to catch overheating in an outdoor enclosure before it causes link degradation, and check licenseMask/license objects to confirm which modulation or capacity features are enabled. The loopbacks and loopback-tributary-mask objects let a technician remotely initiate loopback tests on tributary channels to isolate a transport fault without a truck roll, and restartcpu provides a remote recovery action if the radio unit becomes unresponsive.

What Can Be Monitored

system temperature
system date and time
license/feature status
loopback test status per tributary
product/radio identification
configuration write status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress
enterprises

From RFC1213-MIB

DisplayString
ifEntry

From SNMPv2-TC

DateAndTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
saf	1.3.6.1.4.1.7571
tehnika	1.3.6.1.4.1.7571.100
microwaveRadio	1.3.6.1.4.1.7571.100.1
pointToPoint	1.3.6.1.4.1.7571.100.1.1
safip	1.3.6.1.4.1.7571.100.1.1.5
ipRadio	1.3.6.1.4.1.7571.100.1.1.5.1
ipRadioCfg	1.3.6.1.4.1.7571.100.1.1.5.1.1
ipRadioCfgGeneral	1.3.6.1.4.1.7571.100.1.1.5.1.1.1
STR product	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.1	DisplayString	read-only	Name of the model.
STR description	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.2	DisplayString	read-only	Description of the model.
STR radioName	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.3	DisplayString	read-write	(same as PROMPT>).
DAT sysDateAndTime	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.4	DateAndTime	read-write	Current date and time set. For SET tenths of seconds ignored.
INT sysTemperature	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.5	INTEGER	read-only	Unit temperature in degrees by Celsius. NB - sw before 2009.03.18 shows in *10 degrees
STR license	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.6	DisplayString	read-write	To set license information. Read allways 'OK'.
INT licenseMask	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.7	INTEGER	read-only	Read license mask.
radioTable	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10		not-accessible	Radio table.
radioEntry	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1		not-accessible	Entry containing objects in radio table.
INT radioIndex	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.1	INTEGER	read-only	A unique value for each radio. Its value represents UNIT: 1 - for 'local'; 2 - for 'remote'
INT radioGenStatus	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.2	INTEGER	read-only	A General status of each radio: 1 - 'OK'; 2 - 'error'
INT radioSide	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.3	INTEGER	read-write	Side for duplex communication.
INT radioTxPower	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.4	INTEGER	read-write	Tx power of radio transmitter in dBm.
INT radioRxLevel	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.5	INTEGER	read-only	Received signal level in dBm.
INT radioDuplexShift	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.6	INTEGER	read-write	Utilized duplex shift in KHz.
INT radioLoopback	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.7	INTEGER	read-only	Radio loopback on/off. To set use loopback command.
INT radioTxMute	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.8	INTEGER	read-write	Status of 'Tx mute': 1 - Tx is muted; 2 - Tx is not muted.
INT radioTxFrequency	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.9	INTEGER	read-write	Tx frequency in kHz.
INT radioRxFrequency	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.10	INTEGER	read-only	Rx frequency in kHz.
aTPCTable	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11		not-accessible	ATPC table
aTPCEntry	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1		not-accessible	Entry containing objects in ATPC table.
INT atpcIndex	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.1	INTEGER	read-only	Its value represents UNIT 1 for 'local'; 2 for 'remote'.
INT atpcEnabled	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.2	INTEGER	read-write	ATPC status: 1 for 'on'; 2 for 'off'.
INT atpcTxPowerCorrection	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.3	INTEGER	read-only	ATPC Tx power correction in dBm.
modemTable	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12		not-accessible	CFIP modem table.
modemEntry	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1		not-accessible	Entry containing objects in modem table.
INT modemIndex	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.1	INTEGER	read-only	Value represents UNIT: 1 for local; 2 for remote.
INT modemGeneralStatus	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.2	INTEGER	read-only	A General status of each modem: 1 - 'OK'; 2 - 'error'
INT modemBandwith	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.3	INTEGER	read-write	Modem bandwidth set in KHz.
INT modemE1T1Channels	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.4	INTEGER	read-write	Number of E1 or T1 channels set.
INT modemModulation	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.5	INTEGER	read-only	Modem modulation set. Modulution values are following: QPSK - 1, 8PSK - 2, 16QAM - 3, 32QAM - 4, 64QAM - 5, 128QAM - 6, 256QAM - 7. The combination of wide band and ACM calculates as (modulation + 8is_wide + 16is_ACM). Note: not all of listed modulations supported by hardware. Plese check manual.
INT modemTotalCapacity	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.6	INTEGER	read-only	Total capacity set in Kbps.
INT modemEthernetCapacity	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.7	INTEGER	read-only	Ethernet capacity set in Kbps.
INT modemAcqStatus	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.8	INTEGER	read-only
INT modemLastAcqError	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.9	INTEGER	read-only
INT modemRadialMSE	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.10	INTEGER	read-only	Radial mean square error value *10 in dB. Radial MSE is a method for estimating the signal to noise ratio. ACM engine uses normalized MSE, which is the inverse of SNR. It is calculated by dividing the estimated MSE level with the energy of the received constellation. Radial MSE peak value threshold is dependent on modulation used and LDPC code rate. In case of QPSK it is -8 dB (-10.5 for 'wide'), 16APSK - -13 dB (-18 for 'wide') and 32APSK - -15.5 dB (-21.5 for 'wide'). If the value trespasses this threshold, BER at the output of LDPC decoder will reach the value of 1.0e-06.
INT modemInternalAGCgain	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.11	INTEGER	read-only	dBm
INT modemCarrierOffset	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.12	INTEGER	read-only	Carrier frequency offset in Hz.
INT modemSymbolRateTx	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.13	INTEGER	read-only	kHz
INT modemSymbolRateRx	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.14	INTEGER	read-only	kHz
STR modemLDPCdecoderStress	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.15	DisplayString	read-only	The load of LDPC (low-density parity-check code) decoder. The LDPC is monitored for the number of errors being corrected on the input of LDPC decoder. LDPC stress value thresholds @ BER 1.0e-06: - for standard settings ~4.0e-02; - for 'wide' option ~ 1.0e-03. As long as LDPC stress value is under the specified thresholds, amount of errors (and BER itself) on the output of LDPC remains at zero level.
INT modemACMengine	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.16	INTEGER	read-only	Status of ACM engine. When 'on', value '1' is shown, when 'off' - value is '2'.
INT modemACMmodulationMin	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17	INTEGER	read-write	Modem modulation set. Modulution values are following: QPSK - 1, 8PSK - 2, 16QAM - 3, 32QAM - 4, 64QAM - 5, 128QAM - 6, 256QAM - 7. The combination of wide band and ACM calculates as (modulation + 8is_wide + 16is_ACM). Note: not all of listed modulations supported by hardware. Plese check manual.
INT modemACMtotalCapacity	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.18	INTEGER	read-only	Total capacity in Kbps set by ACM.
INT modemACMethernetCapacity	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.19	INTEGER	read-only	Ethernet capacity in Kbps set by ACM.
INT modemStandard	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.20	INTEGER	read-write	Modem operational standard ETSI or ANSI
INT modemE1T1ChannelMask	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.21	INTEGER	read-write	E1 or T1 channel mask 0x00 - 0x0f
INT modemACMmodulationMax	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.22	INTEGER	read-write	Modem modulation set. Modulution values are following: QPSK - 1, 8PSK - 2, 16QAM - 3, 32QAM - 4, 64QAM - 5, 128QAM - 6, 256QAM - 7. The combination of wide band and ACM calculates as (modulation + 8is_wide + 16is_ACM). Note: as PSK modulations are now physicaly deprecated, theese are replased with QAM, so for new QAM modulations there are modificatior +32. Note: not all of listed modulations supported by hardware. Plese check manual.
INT modemRowStatus	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.23	INTEGER	read-write	Row status - to update written data for modemBandwith, modemACMmodulationMin, modemACMmodulationMax, modemE1T1ChannelMask.
INT vlansEnabled	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.13	INTEGER	read-write	unit temperature *10 degrees Celsius
vlanTable	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14		not-accessible	Vlan table
vlanEntry	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1		not-accessible	entry containing vlan objects
INT vlanNumber	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.1	INTEGER	read-write	A unique value for each vlan.
INT vlanPortType	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.2	INTEGER	read-write	VLAN port type management, traffic or endpoint
INT vlanPortmap	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.3	INTEGER	read-only	display port bindings bitfield 111(bin)
INT vlanFid	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.4	INTEGER	read-only	a filtering identifier (assigned automagically)
INT vlanCfgStat	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.5	INTEGER	read-write	enable/disable vlan # or clear row data
INT vlanRowStatus	1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.6	INTEGER	read-write	Row status (execute configuration on active) Changing any table value sets this value into state notReady. To update row status write value active(1) into this variable.
ipRadioCfgNetwork	1.3.6.1.4.1.7571.100.1.1.5.1.1.2
IP localIp	1.3.6.1.4.1.7571.100.1.1.5.1.1.2.1	IpAddress	read-write	IPv4 Ethernet address of the local unit in a number format(XXX.XXX.XXX.XXX)
IP localIpMask	1.3.6.1.4.1.7571.100.1.1.5.1.1.2.2	IpAddress	read-write	IPv4 Ethernet mask of the local unit in a number format (XXX.XXX.XXX.XXX)
IP remoteIp	1.3.6.1.4.1.7571.100.1.1.5.1.1.2.3	IpAddress	read-write	IPv4 Ethernet address of the remote unit in a number format (XXX.XXX.XXX.XXX).
ipRadioMgmt	1.3.6.1.4.1.7571.100.1.1.5.1.2
INT writeConfig	1.3.6.1.4.1.7571.100.1.1.5.1.2.1	INTEGER	write-only	Write Config
INT restartcpu	1.3.6.1.4.1.7571.100.1.1.5.1.2.2	INTEGER	write-only	Restart of Mng CPU. Values: 1 - 'cold' restart; 3 - sw
INT loopbacks	1.3.6.1.4.1.7571.100.1.1.5.1.2.3	INTEGER	read-write	Set loopback for 1 minute. value error(1) is not writable. Status of loopbacks. Values: 1 - 'error' (not writable); 2 - 'off'; 3 - 'rf' (radio frequency loopback); N/A 2008.10.21 4 - 'if' (intermediate frequency loopback); 5 - 'modem' (modem loopback); 6 - 'far' (far end loopback); N/A 2008.10.21 7 - 'ethernet' (Ethernet loopback); N/A 2008.10.21 8 - 'e1t1-1' (E1/T1 channel 1 loopback); N/A from firmware 1.51 9 - 'e1t1-2' (E1/T1 channel 2 loopback); N/A from firmware 1.51 10 - 'e1t1-3' (E1/T1 channel 3 loopback); N/A from firmware 1.51 11 - 'e1t1-4' (E1/T1 channel 4 loopback); N/A from firmware 1.51 12 - 'multi' (E1/T1 multi - look channel tributary mask)
INT loopback_tributary_mask	1.3.6.1.4.1.7571.100.1.1.5.1.2.4	INTEGER	read-only	Loopback mask for E1/T1 channels
ipRadioStat	1.3.6.1.4.1.7571.100.1.1.5.1.3
ipRadioStatEth	1.3.6.1.4.1.7571.100.1.1.5.1.3.2
CTR ethRXTruncatedFrames	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.1	Counter	read-only	Number of truncated received frames since unit start or statistics reset.
CTR ethRXLongEvents	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.2	Counter	read-only	Number of frames having byte count greater than MAXIMUM FRAME SIZE parameter (1518, 1536 or 1916 bytes) since unit start or statistics reset.
CTR ethRXVlanTagsDetected	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.3	Counter	read-only	Number of VLAN Tags detected since unit start or statistics reset.
CTR ethRXUnsupOpcodes	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.4	Counter	read-only	Number of frames recognized as control frames but contained an Unknown Opcode since unit start or statistics reset.
CTR ethRXPauseFrames	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.5	Counter	read-only	Number of frames received as control frames with valid PAUSE opcodes since unit start or statistics reset.
CTR ethRXControlFrames	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.6	Counter	read-only	Number of frames received as control frames since unit start or statistics reset.
CTR ethRXDribleNibbles	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.7	Counter	read-only	Indicates that following the end of the packet additional 1 to 7 bits are received. A single nibble, named the dribble nibble, is formed but not sent to the system;
CTR ethRXBroadcasts	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.8	Counter	read-only	Number of packets, which destination address contained broadcast address, since unit start or statiistics reset.
CTR ethRXMulticasts	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.9	Counter	read-only	Number of packets, which destination address contained multicast address since unit start or statistics reset.
CTR ethRXDones	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.10	Counter	read-only	Reception of packets successfully completed. Number of completed packets since unit start or statistics reset.
CTR ethRXOutOfRangeErrors	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.11	Counter	read-only	Number of frames where Type/Length field larger than 1518 (Type Field) bytes since unit start or statistics reset.
CTR ethRXLengthCheckerrorsErrors	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.12	Counter	read-only	Number of frames where frame length field in the packet does not match the actual data byte length and is not a Type Field since unit start or statistics reset.
CTR ethRXCRCErrors	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.13	Counter	read-only	Number of frames where frame CRC do not match the internally generated CRC since unit start or statistics reset
CTR ethRXCodeErrors	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.14	Counter	read-only	Number of packets where one or more nibbles are signalled as errors during reception of the packet since unit start or statistics reset.
CTR ethRXFalseCarrierErrors	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.15	Counter	read-only	Indicates that following the last receive statistics vector, a false carrier was detected, noted and reported with this the next receive statistics. The false carrier is not associated with this packet. False carrier is activated on the receive channel that does not result in a packet receive attempt being made;
CTR ethRXDvEvent	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.16	Counter	read-only	Number of the last receive (Rx) events seen being too short to be valid packets since the last unit (re)start or purification of statistics.
CTR ethRXPrevPktDropped	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.17	Counter	read-only	Indicates that since the last receive (Rx), a packet is dropped (i.e. interframe gap too small).
CTR ethRXByteCounterHi	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.18	Counter	read-only	Total number of bytes received (Rx) on the wire since the last unit (re)start or purification of statistics, not counting collided bytes (bits 31:0).
CTR ethRXByteCounterLow	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.19	Counter	read-only	Total number of bytes received (Rx) on the wire since the last unit (re)start or purification of statistics, not counting collided bytes (bits 62:32).
CTR ethTXVlanTags	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.21	Counter	read-only	Number of VLAN tagged Tx packets since the last unit (re)start or purification of statistics. 32-bit counter.
CTR ethTXBackpresEvents	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.22	Counter	read-only	Number of times Tx carrier-sense-method backpressure was previously applied since the last unit (re)start or purification of statistics.
CTR ethTXPauseFrames	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.23	Counter	read-only	Number of frames transmitted (Tx) as control frames with valid PAUSE opcodes since the last unit (re)start or purification of statistics.
CTR ethTXControlFrames	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.24	Counter	read-only	Number of frames transmitted (Tx) as control frames since the last unit (re)start or purification of statistics.
CTR ethTXWireByteCounterHi	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.25	Counter	read-only	Total number of bytes transmitted (Tx) on the wire since the last unit (re)start or purification of statistics, including all bytes from collided attempts (bits 31:0).
CTR ethTXWireByteCounterLow	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.26	Counter	read-only	Total number of bytes transmitted (Tx) on the wire since the last unit (re)start or purification of statistics, including all bytes from collided attempts (bits 62:32).
CTR ethTXUnderruns	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.28	Counter	read-only	Number of underruns occured during frame transmission (Tx) since the last unit (re)start or purification of statistics.
CTR ethTXGiants	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.29	Counter	read-only	Number of Tx frames having byte count greater than the MAXIMUM FRAME SIZE parameter (1516, 1536 or 1916 bytes) since the last unit (re)start or purification of statistics.
CTR ethTXLateCollisions	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.30	Counter	read-only	Number of Tx collisions occurred beyond the collision window (512 bit times) since the last unit (re)start or purification of statistics.
CTR ethTXMaxCollisions	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.31	Counter	read-only	Number of Tx packets aborted after number of collisions exceeded the RETRANSMISSION MAXIMUM parameter since the last unit (re)start or purification of statistics.
CTR ethTXExcessiveDefers	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.32	Counter	read-only	Number of Tx packets deferred in excess of 6,071 nibble times in 100 Mbps mode, or 24,287 bit-times in 10 Mbps mode since the last unit (re)start or purification of statistics.
CTR ethTXNonExcessiveDefers	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.33	Counter	read-only	Number of Tx packets deferred for at least one attempt, but less than an excessive defer since the last unit (re)start or purification of statistics.
CTR ethTXBroadcasts	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.34	Counter	read-only	Number of Tx packets since the last unit (re)start or purification of statistics, which destination address contained broadcast address.
CTR ethTXMulticasts	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.35	Counter	read-only	Number of Tx packets since the last unit (re)start or purification of statistics, which destination address contained multicast address.
CTR ethTXDones	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.36	Counter	read-only	Number of packets successfully transmitted (Tx) since the last unit (re)start or purification of statistics.
CTR ethTXLengthCheckErrors	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.38	Counter	read-only	Number of Tx frames since the last unit (re)start or purification of statistics, where length field in the packet does not match the actual data byte length and is not a Type Field
CTR ethTXCRCErrors	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.39	Counter	read-only	Number of Tx frames since the last unit (re)start or purification of statistics, where CRC does not match the internally generated CRC.
CTR ethTXCollisions	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.40	Counter	read-only	Number of collisions the current packet incurred during transmission (Tx) attempts. Note: Bits 19 through 16 are the collision count on any successfully transmitted packet and as such will not show the possible maximum count of 16 collisions.
CTR ethTXByteCounterHi	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.41	Counter	read-only	Total count of bytes transmitted (Tx) on the wire not including collided bytes (bits 31:0) since the last unit (re)start or purification of statistics.
CTR ethTXByteCounterLow	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.42	Counter	read-only	Total count of bytes transmitted (Tx) on the wire not including collided bytes (bits 62:32) since the last unit (re)start or purification of statistics.
CTR ethGFPFCSErrors	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.44	Counter	read-only	Number of generic framing procedure (GFP) frames with CRC errors received by the de-encapsulation block since the last unit (re)start or purification of statistics.
CTR ethGFPCHECErrors	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.45	Counter	read-only	Number of generic framing procedure (GFP) frames with CHEC errors received by the de-encapsulation block since the last unit (re)start or purification of statistics.
CTR ethGFPDropedFrames	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.46	Counter	read-only	Number of generic framing procedure (GFP) frames that were dropped in the de-encapsulation block since the last unit (re)start or purification of statistics.
CTR ethGFPDelineationErrors	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.47	Counter	read-only	Number of 'lost of synchronization' events since the last unit (re)start or purification of statistics.
CTR ethQOSRXQ1Frames	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.48	Counter	read-only	Number of frames received on Q1 since the last unit (re)start or purification of statistics.
CTR ethQOSRXQ1Dropped	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.49	Counter	read-only	Number of frames dropped on Q1 since the last unit (re)start or purification of statistics.
CTR ethQOSRXQ2Frames	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.50	Counter	read-only	Number of frames received on Q2 since the last unit (re)start or purification of statistics.
CTR ethQOSRXQ2Dropped	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.51	Counter	read-only	Number of frames dropped on Q2 since the last unit (re)start or purification of statistics.
CTR ethQOSTXFrames	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.52	Counter	read-only	Number of frames passed through TX FIFO since the last unit (re)start or purification of statistics.
CTR ethQOSTXDropped	1.3.6.1.4.1.7571.100.1.1.5.1.3.2.53	Counter	read-only	Number of frames dropped in TX FIFO since the last unit (re)start or purification of statistics.
e1t1StatTable	1.3.6.1.4.1.7571.100.1.1.5.1.3.3		not-accessible	E1 (T1) status Table.
e1t1StatEntry	1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1		not-accessible	Entry containing objects in E1 (T1) table
INT e1t1LOS	1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.1	INTEGER	read-only	if signal loss present
INT e1t1AIS	1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.2	INTEGER	read-only	if AIS present
INT e1t1ChannelNr	1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.3	INTEGER	read-only	e1 channel number (it is not associated with interface number - ifEntry)
modemStatistics	1.3.6.1.4.1.7571.100.1.1.5.1.3.4
CTR modemCountTime	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.1	Counter	read-only	Count time in seconds
CTR modemErroredBlock	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.2	Counter	read-only	Errored block
CTR modemErroredSecond	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.3	Counter	read-only	Errored second
CTR modemSeverelyErroredSecond	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.4	Counter	read-only	Severely errored second
CTR modemBackgroundBlockErrror	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.5	Counter	read-only	Background Block Error
CTR modemTotalBlockNumber	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.6	Counter	read-only	Total Block Number
STR modemErroredSecondRatio	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.7	DisplayString	read-only	Errorred Second Ratio
STR modemSeverelyErroredSecondRatio	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.8	DisplayString	read-only	Severely Errorred Second Ratio
STR modemBackgroundBlockErrorRatio	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.9	DisplayString	read-only	Background Block Error Ratio
CTR modemUptime	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.10	Counter	read-only	Uptime (s)
CTR modemUnavailtime	1.3.6.1.4.1.7571.100.1.1.5.1.3.4.11	Counter	read-only	Unavailtime (s)

RFC description

Manages SAF IP radio frequency equipment including CFIP FODU, CFIP IDU, and FreeMile microwave radio systems with configuration, management, and statistics objects.

Start monitoring SAF Tehnika IP microwave radio, point-to-point wireless backhaul terminal (temperature/license/config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SAF-IPRADIO

What Is SAF-IPRADIO?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description