SAF-IPRADIO :: modemACMmodulationMin

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SAF-IPRADIO › modemACMmodulationMin

modemACMmodulationMin

Module: SAF-IPRADIO

OID (symbolic): SAF-IPRADIO::modemACMmodulationMin

OID (numeric): 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Modem modulation set. Modulution values are following: QPSK - 1, 8PSK - 2, 16QAM - 3, 32QAM - 4, 64QAM - 5, 128QAM - 6, 256QAM - 7. The combination of wide band and ACM calculates as (modulation + 8*is_wide + 16*is_ACM). Note: not all of listed modulations supported by hardware. Plese check manual.

What is modemACMmodulationMin?

This value sets or reports the minimum (most robust) modulation the ACM engine is allowed to step down to under fading conditions, using the same modulation code scheme as modemModulation (QPSK through 256QAM, with wide-band and ACM variants). An admin sets this to establish a capacity floor: the link will never drop below this modulation even during severe fading, trading some availability for a guaranteed minimum throughput. Setting this too high for a path with frequent deep fades risks the link dropping entirely instead of stepping down further, since the ACM engine has no lower modulation left to fall back to.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17
snmpwalk -v2c -c public <target> SAF-IPRADIO::modemACMmodulationMin

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17.1
snmpget -v2c -c public <target> SAF-IPRADIO::modemACMmodulationMin.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17.1 i <value>

Start monitoring SAF Tehnika IP microwave radio, point-to-point wireless backhaul terminal (temperature/license/config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SAF-IPRADIO::modemACMmodulationMin OID value, configure state conditions and alerts, and monitor any SAF Tehnika IP microwave radio, point-to-point wireless backhaul terminal (temperature/license/config) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7571safSAF-ENTERPRISE
1.3.6.1.4.1.7571.100tehnikaSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1microwaveRadioSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1.1pointToPointSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1.1.5safipSAF-IPADDONS
Numeric OIDNameModule
1.3.6.1.4.1.7571.100.1.1.5.1ipRadioSAF-IPRADIO
1.3.6.1.4.1.7571.100.1.1.5.1.1ipRadioCfgSAF-IPRADIO
1.3.6.1.4.1.7571.100.1.1.5.1.1.1ipRadioCfgGeneralSAF-IPRADIO
1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12modemTableSAF-IPRADIO
1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1modemEntrySAF-IPRADIO
1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17modemACMmodulationMinSAF-IPRADIO