SAF-MPMUX-MIB

All MIBs › SAF-MPMUX-MIB

Category: Microwave Radio - SAF Tehnika, SAF Tehnika Microwave

Description: Covers channel configuration and traffic aggregation for SAF Tehnika multi-point multiplexers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SAF-MPMUX-MIB?

SAF-MPMUX-MIB is a vendor-specific MIB from SAF Tehnika covering their multi-point multiplexer (MPMUX) products used in microwave radio backhaul links. It exposes terminal identification data (product, description, location, version) alongside operational and RF performance parameters for the microwave link. The MIB is explicitly geared toward hardware and operational health monitoring: it reports IDU (indoor unit) temperature, frame error counts, and RF cable power status for each of two RF ports, and offers management actions such as writing configuration and restarting the CPU. There is no indication of dependency on other standard MIBs beyond the enterprise SAF/Tehnika tree, making it largely self-contained. It is typically deployed in wireless backhaul networks where operators need to remotely supervise microwave multiplexer terminals for link quality, thermal health, and remote recovery. Engineers can download the SAF-MPMUX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SAF-MPMUX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SAF Tehnika microwave radio multiplexer terminal
microwave backhaul indoor unit (IDU)

Monitoring Examples

An operator would poll termIduTemperature to catch overheating of the indoor unit before it triggers a fault, and watch termFrameErrors to detect a degrading microwave link before it drops packets. termRf1CablePowerStatus and termRf2CablePowerStatus reveal whether either RF cable feed has lost power, which typically indicates a cable fault or connector issue at the antenna. If a device becomes unresponsive, an administrator can invoke restartCPU remotely rather than dispatching a technician to the tower site.

What Can Be Monitored

IDU temperature
frame error count
RF1 cable power status
RF2 cable power status
terminal operation state
firmware/hardware version

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
saf	1.3.6.1.4.1.7571
tehnika	1.3.6.1.4.1.7571.100
microwaveRadio	1.3.6.1.4.1.7571.100.1
pointToPoint	1.3.6.1.4.1.7571.100.1.1
cfm22	1.3.6.1.4.1.7571.100.1.1.2
mpmux	1.3.6.1.4.1.7571.100.1.1.2.22
NTF alarmTrap	1.3.6.1.4.1.7571.100.1.1.2.22.0.0			SAF management Alarm trap.
NTF alinkTrap	1.3.6.1.4.1.7571.100.1.1.2.22.0.1			SAF Active Link trap.
terminal	1.3.6.1.4.1.7571.100.1.1.2.22.1
STR termProduct	1.3.6.1.4.1.7571.100.1.1.2.22.1.1	DisplayString	read-only	Textual name of the model.
STR termDescription	1.3.6.1.4.1.7571.100.1.1.2.22.1.2	DisplayString	read-only	Textual description of the model.
STR termLocation	1.3.6.1.4.1.7571.100.1.1.2.22.1.3	DisplayString	read-write	Textual description of location (same as PROMT>).
STR termVersion	1.3.6.1.4.1.7571.100.1.1.2.22.1.4	DisplayString	read-only	Textual version.
INT termOperation	1.3.6.1.4.1.7571.100.1.1.2.22.1.5	INTEGER	read-only	System operation.
INT termIduTemperature	1.3.6.1.4.1.7571.100.1.1.2.22.1.6	INTEGER	read-only	Integer variable.
INT termFrameErrors	1.3.6.1.4.1.7571.100.1.1.2.22.1.10	INTEGER	read-only	Integer variable.
INT writeConfig	1.3.6.1.4.1.7571.100.1.1.2.22.1.11	INTEGER	write-only	Write Config
INT restartCPU	1.3.6.1.4.1.7571.100.1.1.2.22.1.12	INTEGER	write-only	Restart CPU
STR serialNumber	1.3.6.1.4.1.7571.100.1.1.2.22.1.13	DisplayString	read-only	Serial number
INT termRf1CablePowerStatus	1.3.6.1.4.1.7571.100.1.1.2.22.1.14	INTEGER	read-only	Cable status from ODU1
INT termRf2CablePowerStatus	1.3.6.1.4.1.7571.100.1.1.2.22.1.15	INTEGER	read-only	Cable status from ODU2
STR power3V3PS1	1.3.6.1.4.1.7571.100.1.1.2.22.1.16	DisplayString	read-only	IDU power voltage +3.3V
STR power5VPS1	1.3.6.1.4.1.7571.100.1.1.2.22.1.17	DisplayString	read-only	IDU power voltage +5V
STR powerM5VPS1	1.3.6.1.4.1.7571.100.1.1.2.22.1.18	DisplayString	read-only	IDU power voltage -5V
STR powerODU1V	1.3.6.1.4.1.7571.100.1.1.2.22.1.19	DisplayString	read-only	ODU power voltage (V)
STR powerODU1I	1.3.6.1.4.1.7571.100.1.1.2.22.1.20	DisplayString	read-only	ODU power current (A)
STR powerODU1W	1.3.6.1.4.1.7571.100.1.1.2.22.1.21	DisplayString	read-only	ODU power (W)
STR power3V3PS2	1.3.6.1.4.1.7571.100.1.1.2.22.1.22	DisplayString	read-only	IDU power voltage +3.3V
STR power5VPS2	1.3.6.1.4.1.7571.100.1.1.2.22.1.23	DisplayString	read-only	IDU power voltage +5V
STR powerM5VPS2	1.3.6.1.4.1.7571.100.1.1.2.22.1.24	DisplayString	read-only	IDU power voltage -5V
STR powerODU2V	1.3.6.1.4.1.7571.100.1.1.2.22.1.25	DisplayString	read-only	ODU power voltage (V)
STR powerODU2I	1.3.6.1.4.1.7571.100.1.1.2.22.1.26	DisplayString	read-only	ODU power current (A)
STR powerODU2W	1.3.6.1.4.1.7571.100.1.1.2.22.1.27	DisplayString	read-only	ODU power (W)
INT cpuUsage	1.3.6.1.4.1.7571.100.1.1.2.22.1.28	INTEGER	read-only	CPU usage [%]
CTR termBFrameErr	1.3.6.1.4.1.7571.100.1.1.2.22.1.29	Counter	read-only	Background block errors
GAU termStatCountTime	1.3.6.1.4.1.7571.100.1.1.2.22.1.30	Gauge	read-only	Stat. count. time
GAU termErroredSecond	1.3.6.1.4.1.7571.100.1.1.2.22.1.31	Gauge	read-only	Err. seconds
GAU termSeverelyErroredSecond	1.3.6.1.4.1.7571.100.1.1.2.22.1.32	Gauge	read-only	Severe err. seconds
GAU termSyncLostTime	1.3.6.1.4.1.7571.100.1.1.2.22.1.33	Gauge	read-only	Sync lost time
GAU termAvailableTime	1.3.6.1.4.1.7571.100.1.1.2.22.1.34	Gauge	read-only	Available time
GAU termUnAvailableTime	1.3.6.1.4.1.7571.100.1.1.2.22.1.35	Gauge	read-only	Unavailable time
STR termBer	1.3.6.1.4.1.7571.100.1.1.2.22.1.36	DisplayString	read-only	Textual representation of BER
INT berAlarm	1.3.6.1.4.1.7571.100.1.1.2.22.1.37	INTEGER	read-only	The BER alarm
INT remoteAlarm	1.3.6.1.4.1.7571.100.1.1.2.22.1.38	INTEGER	read-only	The Remote alarm
INT systemAlarm	1.3.6.1.4.1.7571.100.1.1.2.22.1.39	INTEGER	read-only	The SYSTEM alarm
INT inputABCD	1.3.6.1.4.1.7571.100.1.1.2.22.1.40	INTEGER	read-only	The Input sensor
INT outputABCD	1.3.6.1.4.1.7571.100.1.1.2.22.1.41	INTEGER	read-write	The Output relays
INT termBerInPwOf10	1.3.6.1.4.1.7571.100.1.1.2.22.1.42	INTEGER	read-only	The Power of 10 part of termBer
INT outputMaskABCD	1.3.6.1.4.1.7571.100.1.1.2.22.1.43	INTEGER	read-write	The Output relay bit mask. If the correspondig bit is 0 - the output bit can be changed manualy 1 - the output bit changes automaticaly (according to sync lost, radio allarm etc.)
baseband	1.3.6.1.4.1.7571.100.1.1.2.22.2
STR bbVersion	1.3.6.1.4.1.7571.100.1.1.2.22.2.1	DisplayString	read-only	Textual version.
INT bbOperation	1.3.6.1.4.1.7571.100.1.1.2.22.2.2	INTEGER	read-only	System operation.
INT bbLinkCapacity	1.3.6.1.4.1.7571.100.1.1.2.22.2.3	INTEGER	read-only	Integer variable.
STR bbLinkCapacityDescription	1.3.6.1.4.1.7571.100.1.1.2.22.2.4	DisplayString	read-write	Textual version.
INT bbLoopback	1.3.6.1.4.1.7571.100.1.1.2.22.2.5	INTEGER	read-write	Loopback Integer variable.
INT bbSyncLostAlarm	1.3.6.1.4.1.7571.100.1.1.2.22.2.6	INTEGER	read-only	The SYncLostAlarm.
radio1	1.3.6.1.4.1.7571.100.1.1.2.22.3
INT rf1Operation	1.3.6.1.4.1.7571.100.1.1.2.22.3.1	INTEGER	read-only	Radio operation.
INT rf1Alarm	1.3.6.1.4.1.7571.100.1.1.2.22.3.2	INTEGER	read-only	The RadioAlarm.
STR rf1Version	1.3.6.1.4.1.7571.100.1.1.2.22.3.3	DisplayString	read-only	Textual version.
INT rf1Side	1.3.6.1.4.1.7571.100.1.1.2.22.3.4	INTEGER	read-only	The Side.
INT rf1Channel	1.3.6.1.4.1.7571.100.1.1.2.22.3.5	INTEGER	read-write	Integer variable.
STR rf1TxFrequency	1.3.6.1.4.1.7571.100.1.1.2.22.3.6	DisplayString	read-only	Textual version.
STR rf1RxFrequency	1.3.6.1.4.1.7571.100.1.1.2.22.3.7	DisplayString	read-only	Textual version.
INT rf1TxPower	1.3.6.1.4.1.7571.100.1.1.2.22.3.8	INTEGER	read-write	Integer variable.
INT rf1RxState	1.3.6.1.4.1.7571.100.1.1.2.22.3.9	INTEGER	read-only	The rx State.
INT rf1RxLevel	1.3.6.1.4.1.7571.100.1.1.2.22.3.10	INTEGER	read-only	Integer variable.
INT rf1CableAttenuation	1.3.6.1.4.1.7571.100.1.1.2.22.3.11	INTEGER	read-only	Integer variable.
INT rf1TxOut	1.3.6.1.4.1.7571.100.1.1.2.22.3.12	INTEGER	read-only	The Tx out.
INT rf1TxPLL	1.3.6.1.4.1.7571.100.1.1.2.22.3.13	INTEGER	read-only	The txPLL.
INT rf1RxPLL	1.3.6.1.4.1.7571.100.1.1.2.22.3.14	INTEGER	read-only	The rxPLL.
INT rf1OduTemperature	1.3.6.1.4.1.7571.100.1.1.2.22.3.15	INTEGER	read-only	Integer variable.
INT rf1OduHumidity	1.3.6.1.4.1.7571.100.1.1.2.22.3.16	INTEGER	read-only	The ODU Humidity.
INT rf1Loopback	1.3.6.1.4.1.7571.100.1.1.2.22.3.17	INTEGER	read-write	Loopback Integer variable.
INT rf1RxAlarmLevel	1.3.6.1.4.1.7571.100.1.1.2.22.3.18	INTEGER	read-write	Integer variable.
INT rf1txfstart	1.3.6.1.4.1.7571.100.1.1.2.22.3.19	INTEGER	read-only	Integer variable.
INT rf1duplexshift	1.3.6.1.4.1.7571.100.1.1.2.22.3.20	INTEGER	read-only	Integer variable.
INT rf1chstep	1.3.6.1.4.1.7571.100.1.1.2.22.3.21	INTEGER	read-only	Integer variable.
INT rf1chstart	1.3.6.1.4.1.7571.100.1.1.2.22.3.22	INTEGER	read-only	Integer variable.
INT rf1chend	1.3.6.1.4.1.7571.100.1.1.2.22.3.23	INTEGER	read-only	Integer variable.
INT rf1txpwmin	1.3.6.1.4.1.7571.100.1.1.2.22.3.24	INTEGER	read-only	Integer variable.
INT rf1txpwmax	1.3.6.1.4.1.7571.100.1.1.2.22.3.25	INTEGER	read-only	Integer variable.
INT rf1txpwstep	1.3.6.1.4.1.7571.100.1.1.2.22.3.26	INTEGER	read-only	Integer variable.
radio2	1.3.6.1.4.1.7571.100.1.1.2.22.4
INT rf2Operation	1.3.6.1.4.1.7571.100.1.1.2.22.4.1	INTEGER	read-only	Radio operation.
INT rf2Alarm	1.3.6.1.4.1.7571.100.1.1.2.22.4.2	INTEGER	read-only	The RadioAlarm. -> rf1Alarm
STR rf2Version	1.3.6.1.4.1.7571.100.1.1.2.22.4.3	DisplayString	read-only	Textual version.
INT rf2Side	1.3.6.1.4.1.7571.100.1.1.2.22.4.4	INTEGER	read-only	The Side.
INT rf2Channel	1.3.6.1.4.1.7571.100.1.1.2.22.4.5	INTEGER	read-write	Integer variable.
STR rf2TxFrequency	1.3.6.1.4.1.7571.100.1.1.2.22.4.6	DisplayString	read-only	Textual version.
STR rf2RxFrequency	1.3.6.1.4.1.7571.100.1.1.2.22.4.7	DisplayString	read-only	Textual version.
INT rf2TxPower	1.3.6.1.4.1.7571.100.1.1.2.22.4.8	INTEGER	read-write	Integer variable.
INT rf2RxState	1.3.6.1.4.1.7571.100.1.1.2.22.4.9	INTEGER	read-only	The rx State.
INT rf2RxLevel	1.3.6.1.4.1.7571.100.1.1.2.22.4.10	INTEGER	read-only	Integer variable.
INT rf2CableAttenuation	1.3.6.1.4.1.7571.100.1.1.2.22.4.11	INTEGER	read-only	Integer variable.
INT rf2TxOut	1.3.6.1.4.1.7571.100.1.1.2.22.4.12	INTEGER	read-only	The Tx out.
INT rf2TxPLL	1.3.6.1.4.1.7571.100.1.1.2.22.4.13	INTEGER	read-only	The txPLL.
INT rf2RxPLL	1.3.6.1.4.1.7571.100.1.1.2.22.4.14	INTEGER	read-only	The rxPLL.
INT rf2OduTemperature	1.3.6.1.4.1.7571.100.1.1.2.22.4.15	INTEGER	read-only	Integer variable.
INT rf2OduHumidity	1.3.6.1.4.1.7571.100.1.1.2.22.4.16	INTEGER	read-only	The ODU Humidity.
INT rf2Loopback	1.3.6.1.4.1.7571.100.1.1.2.22.4.17	INTEGER	read-write	Loopback Integer variable.
INT rf2RxAlarmLevel	1.3.6.1.4.1.7571.100.1.1.2.22.4.18	INTEGER	read-write	Integer variable.
INT rf2txfstart	1.3.6.1.4.1.7571.100.1.1.2.22.4.19	INTEGER	read-only	Integer variable.
INT rf2duplexshift	1.3.6.1.4.1.7571.100.1.1.2.22.4.20	INTEGER	read-only	Integer variable.
INT rf2chstep	1.3.6.1.4.1.7571.100.1.1.2.22.4.21	INTEGER	read-only	Integer variable.
INT rf2chstart	1.3.6.1.4.1.7571.100.1.1.2.22.4.22	INTEGER	read-only	Integer variable.
INT rf2chend	1.3.6.1.4.1.7571.100.1.1.2.22.4.23	INTEGER	read-only	Integer variable.
INT rf2txpwmin	1.3.6.1.4.1.7571.100.1.1.2.22.4.24	INTEGER	read-only	Integer variable.
INT rf2txpwmax	1.3.6.1.4.1.7571.100.1.1.2.22.4.25	INTEGER	read-only	Integer variable.
INT rf2txpwstep	1.3.6.1.4.1.7571.100.1.1.2.22.4.26	INTEGER	read-only	Integer variable.
switchCtrl	1.3.6.1.4.1.7571.100.1.1.2.22.5
INT activeLink	1.3.6.1.4.1.7571.100.1.1.2.22.5.1	INTEGER	read-write	Integer variable.
INT activeTx	1.3.6.1.4.1.7571.100.1.1.2.22.5.2	INTEGER	read-write	Integer variable.
INT preferedLink	1.3.6.1.4.1.7571.100.1.1.2.22.5.3	INTEGER	read-write	Integer variable.
INT forcedLink	1.3.6.1.4.1.7571.100.1.1.2.22.5.4	INTEGER	read-write	Integer variable.
INT switchMode	1.3.6.1.4.1.7571.100.1.1.2.22.5.5	INTEGER	read-write	Integer variable.
INT odu1RxMax	1.3.6.1.4.1.7571.100.1.1.2.22.5.6	INTEGER	read-write	Integer variable.
INT odu2RxMax	1.3.6.1.4.1.7571.100.1.1.2.22.5.7	INTEGER	read-write	Integer variable.
INT odu1RxMin	1.3.6.1.4.1.7571.100.1.1.2.22.5.8	INTEGER	read-write	Integer variable.
INT odu2RxMin	1.3.6.1.4.1.7571.100.1.1.2.22.5.9	INTEGER	read-write	Integer variable.
INT rxDelta	1.3.6.1.4.1.7571.100.1.1.2.22.5.10	INTEGER	read-write	Integer variable.
STR rxBER	1.3.6.1.4.1.7571.100.1.1.2.22.5.11	DisplayString	read-write	Maximum value of allowed BER
INT switchDelay	1.3.6.1.4.1.7571.100.1.1.2.22.5.12	INTEGER	read-write	Delay (s)
INT switchEnabledForRxBer	1.3.6.1.4.1.7571.100.1.1.2.22.5.13	INTEGER	read-only	Enable/disable swithing for Rx and BER
INT switchReason	1.3.6.1.4.1.7571.100.1.1.2.22.5.14	INTEGER	read-only	100 - command SWITCH FORCE OFF 101 - command SWITCH FORCE 1 102 - command SWITCH FORCE 2 103 - command SWITCH ACTIVE 1 104 - command SWITCH ACTIVE 2 105 - active ODU changed from 1 to 2 because of power problems in ODU1 106 - active ODU changed from 2 to 2 because of power problems in ODU2 107 - active ODU changed from 1 to 2 because of cable problems in ODU1 108 - active ODU changed from 2 to 1 because of cable problems in ODU2 109 - active ODU changed from 1 to 2 because of SyncLoss problems when active ODU1 110 - active ODU changed from 2 to 1 because of SyncLoss problems when active ODU2 111 - active ODU changed from 1 to 2 because of RAI problems when active ODU1 112 - active ODU changed from 2 to 1 because of RAI problems when active ODU2 113 - active ODU changed from 1 to 2 because of RXLEV problems in ODU1 114 - active ODU changed from 2 to 1 because of RXLEV problems in ODU2 115 - active ODU changed from 1 to 2 because of BER problems when active ODU1 116 - active ODU changed from 2 to 1 because of BER problems when active ODU2
modules	1.3.6.1.4.1.7571.100.1.1.2.22.6
m1	1.3.6.1.4.1.7571.100.1.1.2.22.6.1
INT m1Type	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.1	INTEGER	read-only	The module type.
STR m1Description	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.2	DisplayString	read-only	Textual description of the module.
STR m1Version	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.3	DisplayString	read-only	Module Textual version.
INT m1Speed	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.4	INTEGER	read-write	Module data speed Integer variable Kbit.
INT m1Operation	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.5	INTEGER	read-only	Module operation statuss.
INT m1Rx	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.6	INTEGER	read-only	Module Rx statuss.
INT m1Tx	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.7	INTEGER	read-only	Module Tx statuss.
INT m1Loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.8	INTEGER	read-write	Module Loopback Integer variable.
INT m1RxInput	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.9	INTEGER	read-write	Module Rx Input.
INT m1TxMode	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.10	INTEGER	read-write	Module Tx duplex mode.
INT m1TxClockSource	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.11	INTEGER	read-write	Module Tx clock source.
INT m1TxClockPhase	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.12	INTEGER	read-write	Module Tx clock Phase.
INT m1DataPolarity	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.13	INTEGER	read-write	Module data.
INT m1ChanCount	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.14	INTEGER	read-only	Number of data channels
m1port1	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21
INT m1p1statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21.1	INTEGER	read-only
INT m1p1connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m1p1flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21.3	INTEGER	read-write
INT m1p1priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21.4	INTEGER	read-write
INT m1p1loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.21.5	INTEGER	read-write	loopback
m1port2	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22
INT m1p2statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22.1	INTEGER	read-only
INT m1p2connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m1p2flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22.3	INTEGER	read-write
INT m1p2priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22.4	INTEGER	read-write
INT m1p2loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.22.5	INTEGER	read-write	loopback
m1port3	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23
INT m1p3statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23.1	INTEGER	read-only
INT m1p3connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m1p3flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23.3	INTEGER	read-write
INT m1p3priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23.4	INTEGER	read-write
INT m1p3loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.23.5	INTEGER	read-write	loopback
m1port4	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24
INT m1p4statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24.1	INTEGER	read-only
INT m1p4connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m1p4flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24.3	INTEGER	read-write
INT m1p4priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24.4	INTEGER	read-write
INT m1p4loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.1.24.5	INTEGER	read-write	loopback
m2	1.3.6.1.4.1.7571.100.1.1.2.22.6.2
INT m2Type	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.1	INTEGER	read-only	The module type.
STR m2Description	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.2	DisplayString	read-only	Textual description of the module.
STR m2Version	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.3	DisplayString	read-only	Module Textual version.
INT m2Speed	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.4	INTEGER	read-write	Module data speed Integer variable Kbit.
INT m2Operation	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.5	INTEGER	read-only	Module operation statuss.
INT m2Rx	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.6	INTEGER	read-only	Module Rx statuss.
INT m2Tx	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.7	INTEGER	read-only	Module Tx statuss.
INT m2Loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.8	INTEGER	read-write	Loopback Integer variable.
INT m2RxInput	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.9	INTEGER	read-write	Module Rx Input.
INT m2TxMode	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.10	INTEGER	read-write	Module Tx duplex mode.
INT m2TxClockSource	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.11	INTEGER	read-write	Module Tx clock source.
INT m2TxClockPhase	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.12	INTEGER	read-write	Module Tx clock Phase.
INT m2DataPolarity	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.13	INTEGER	read-write	Module data.
INT m2ChanCount	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.14	INTEGER	read-only	Number of data channels
m2port1	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21
INT m2p1statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21.1	INTEGER	read-only
INT m2p1connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m2p1flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21.3	INTEGER	read-write
INT m2p1priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21.4	INTEGER	read-write
INT m2p1loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.21.5	INTEGER	read-write	loopback
m2port2	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22
INT m2p2statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22.1	INTEGER	read-only
INT m2p2connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m2p2flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22.3	INTEGER	read-write
INT m2p2priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22.4	INTEGER	read-write
INT m2p2loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.22.5	INTEGER	read-write	loopback
m2port3	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23
INT m2p3statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23.1	INTEGER	read-only
INT m2p3connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m2p3flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23.3	INTEGER	read-write
INT m2p3priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23.4	INTEGER	read-write
INT m2p3loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.23.5	INTEGER	read-write	loopback
m2port4	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24
INT m2p4statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24.1	INTEGER	read-only
INT m2p4connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m2p4flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24.3	INTEGER	read-write
INT m2p4priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24.4	INTEGER	read-write
INT m2p4loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.2.24.5	INTEGER	read-write	loopback
m3	1.3.6.1.4.1.7571.100.1.1.2.22.6.3
INT m3Type	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.1	INTEGER	read-only	The module type.
STR m3Description	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.2	DisplayString	read-only	Textual description of the module.
STR m3Version	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.3	DisplayString	read-only	Module Textual version.
INT m3Speed	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.4	INTEGER	read-write	Module data speed Integer variable Kbit.
INT m3Operation	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.5	INTEGER	read-only	Module operation statuss.
INT m3Rx	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.6	INTEGER	read-only	Module Rx statuss.
INT m3Tx	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.7	INTEGER	read-only	Module Tx statuss.
INT m3Loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.8	INTEGER	read-write	Loopback Integer variable.
INT m3RxInput	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.9	INTEGER	read-write	Module Rx Input.
INT m3TxMode	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.10	INTEGER	read-write	Module Tx duplex mode.
INT m3TxClockSource	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.11	INTEGER	read-write	Module Tx clock source.
INT m3TxClockPhase	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.12	INTEGER	read-write	Module Tx clock Phase.
INT m3DataPolarity	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.13	INTEGER	read-write	Module data.
INT m3ChanCount	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.14	INTEGER	read-only	Number of data channels
m3port1	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21
INT m3p1statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21.1	INTEGER	read-only
INT m3p1connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m3p1flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21.3	INTEGER	read-write
INT m3p1priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21.4	INTEGER	read-write
INT m3p1loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.21.5	INTEGER	read-write	loopback
m3port2	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22
INT m3p2statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22.1	INTEGER	read-only
INT m3p2connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m3p2flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22.3	INTEGER	read-write
INT m3p2priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22.4	INTEGER	read-write
INT m3p2loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.22.5	INTEGER	read-write	loopback
m3port3	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23
INT m3p3statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23.1	INTEGER	read-only
INT m3p3connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m3p3flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23.3	INTEGER	read-write
INT m3p3priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23.4	INTEGER	read-write
INT m3p3loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.23.5	INTEGER	read-write	loopback
m3port4	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24
INT m3p4statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24.1	INTEGER	read-only
INT m3p4connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m3p4flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24.3	INTEGER	read-write
INT m3p4priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24.4	INTEGER	read-write
INT m3p4loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.3.24.5	INTEGER	read-write	loopback
m4	1.3.6.1.4.1.7571.100.1.1.2.22.6.4
INT m4Type	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.1	INTEGER	read-only	The module type.
STR m4Description	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.2	DisplayString	read-only	Textual description of the module.
STR m4Version	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.3	DisplayString	read-only	Module Textual version.
INT m4Speed	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.4	INTEGER	read-write	Module data speed Integer variable Kbit.
INT m4Operation	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.5	INTEGER	read-only	Module operation statuss.
INT m4Rx	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.6	INTEGER	read-only	Module Rx statuss.
INT m4Tx	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.7	INTEGER	read-only	Module Tx statuss.
INT m4Loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.8	INTEGER	read-write	Loopback Integer variable.
INT m4RxInput	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.9	INTEGER	read-write	Module Rx Input.
INT m4TxMode	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.10	INTEGER	read-write	Module Tx duplex mode.
INT m4TxClockSource	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.11	INTEGER	read-write	Module Tx clock source.
INT m4TxClockPhase	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.12	INTEGER	read-write	Module Tx clock Phase.
INT m4DataPolarity	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.13	INTEGER	read-write	Module data.
INT m4ChanCount	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.14	INTEGER	read-only	Number of data channels
m4port1	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21
INT m4p1statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21.1	INTEGER	read-only
INT m4p1connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m4p1flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21.3	INTEGER	read-write
INT m4p1priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21.4	INTEGER	read-write
INT m4p1loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.21.5	INTEGER	read-write	loopback
m4port2	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22
INT m4p2statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22.1	INTEGER	read-only
INT m4p2connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m4p2flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22.3	INTEGER	read-write
INT m4p2priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22.4	INTEGER	read-write
INT m4p2loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.22.5	INTEGER	read-write	loopback
m4port3	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23
INT m4p3statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23.1	INTEGER	read-only
INT m4p3connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m4p3flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23.3	INTEGER	read-write
INT m4p3priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23.4	INTEGER	read-write
INT m4p3loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.23.5	INTEGER	read-write	loopback
m4port4	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24
INT m4p4statbin	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24.1	INTEGER	read-only
INT m4p4connection	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24.2	INTEGER	read-write	Note: ds1 means E1 or T1
INT m4p4flowcntrl	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24.3	INTEGER	read-write
INT m4p4priority	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24.4	INTEGER	read-write
INT m4p4loopback	1.3.6.1.4.1.7571.100.1.1.2.22.6.4.24.5	INTEGER	read-write	loopback

RFC description

Manages SAF Tehnika multi-point multiplexer channel configuration and traffic aggregation.

Start monitoring SAF Tehnika microwave radio multiplexer terminal, backhaul indoor unit (IDU) (temperature/frame errors) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SAF-MPMUX-MIB

What Is SAF-MPMUX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description