RBTWS-TRAP-MIB

All MIBs › RBTWS-TRAP-MIB

Organization: Enterasys Networks

Last Updated: 2008-05-15

Category: Wireless LAN

Description: Defines SNMP trap notifications for access point events and controller alarms on Enterasys RoamAbout WLAN platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RBTWS-TRAP-MIB?

RBTWS-TRAP-MIB defines the SNMP notification (trap) objects emitted by Enterasys Networks RoamAbout wireless LAN switches (Access Controllers, AC) about events occurring on themselves and on the access points (AP) and wireless clients they manage. It exposes varbind objects carrying event context such as device and mobility-domain identifiers, AP and client MAC addresses, radio/RF signal information, authentication server details, and client session state, used within notifications rather than as standalone polled tables. In terms of status monitoring, it is primarily fault/event-oriented software monitoring: it lets an NMS learn in near-real time about wireless events like client authentication changes, rogue-transmitter (RF) detection, or session-state transitions, complementing steady-state polling of the controller's own health. It is closely tied to the broader Enterasys RoamAbout WLAN MIB family (device and client tables) whose identifiers these trap varbinds reuse. It is deployed in enterprise wireless LAN environments where Enterasys RoamAbout access controllers manage fleets of access points and need to push asynchronous alerts to a central NMS. Network engineers evaluating or troubleshooting this functionality can download the RBTWS-TRAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RBTWS-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Enterasys RoamAbout wireless LAN controllers (Access Controllers)
Enterasys RoamAbout access points (managed via the controller)

Monitoring Examples

A trap using varbinds such as rbtwsDeviceId, rbtwsAPMACAddress, and rbtwsAPRadioNum would tell an admin which controller and access point radio raised an event, while rbtwsRadioRssi and rbtwsRadioBSSID reveal the signal strength and BSSID observed, useful for diagnosing weak coverage or rogue AP detection via rbtwsRFDetectXmtrMacAddr. Client-oriented traps carry rbtwsClientMACAddress, rbtwsUserName, rbtwsClientAuthServerIp, and rbtwsClientSessionState, letting an operator see when a client's session moves to a failed or de-authenticated state, e.g., an authentication server unreachable at rbtwsClientAuthServerIp. rbtwsTrapsV2 is the notification group tying these together for SNMPv2 trap delivery.

What Can Be Monitored

wireless client authentication/session state changes
access point radio RSSI and BSSID
rogue RF transmitter detection
client authentication server reachability
per-device and per-AP event/alarm notifications

Imported Objects

From RBTWS-AP-TC

RbtwsAccessType
RbtwsApAttachType
RbtwsApConnectSecurityType
RbtwsApFailDetail
RbtwsApFingerprint
RbtwsApNum
RbtwsApPortOrDapNum
RbtwsApSerialNum
RbtwsApServiceAvailability
RbtwsApTransition
RbtwsApWasOperational
RbtwsChannelChangeType
RbtwsCryptoType
RbtwsPowerLevel
RbtwsRadioChannelWidth
RbtwsRadioConfigState
RbtwsRadioMimoState
RbtwsRadioMode
RbtwsRadioNum
RbtwsRadioPowerChangeType
RbtwsRadioType

From RBTWS-CLIENT-SESSION-TC

RbtwsClientAccessMode
RbtwsClientAuthenProtocolType
RbtwsClientDot1xState
RbtwsClientSessionState
RbtwsUserAccessType

From RBTWS-RF-DETECT-TC

RbtwsRFDetectClassificationReason

From RBTWS-ROOT-MIB

rbtwsMibs	OBJECT-IDENTITY
rbtwsTemporary	OBJECT-IDENTITY
rbtwsTraps	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
OID rbtwsDeviceId	1.3.6.1.4.1.52.4.15.1.2.1	OBJECT IDENTIFIER	accessible-for-notify	Enumeration of devices as indicated in registration MIB. This object is used within notifications and is not accessible.
IP rbtwsMobilityDomainIp	1.3.6.1.4.1.52.4.15.1.2.2	IpAddress	accessible-for-notify	IP address of the other switch which the send switch is reporting on. This object is used within notifications and is not accessible.
MAC rbtwsAPMACAddress	1.3.6.1.4.1.52.4.15.1.2.3	MacAddress	accessible-for-notify	MAC address of the AP of interest. This object is used within notifications and is not accessible.
MAC rbtwsClientMACAddress	1.3.6.1.4.1.52.4.15.1.2.4	MacAddress	accessible-for-notify	MAC address of the client of interest. This object is used within notifications and is not accessible.
MAC rbtwsRFDetectXmtrMacAddr	1.3.6.1.4.1.52.4.15.1.2.5	MacAddress	accessible-for-notify	Describes the transmitter's MAC address. This object is used within notifications and is not accessible.
INT rbtwsPortNum	1.3.6.1.4.1.52.4.15.1.2.6	INTEGER	accessible-for-notify	Port number on the AC which reported this rogue during a detection sweep. This object is used within notifications and is not accessible.
RBT rbtwsAPRadioNum	1.3.6.1.4.1.52.4.15.1.2.7	RbtwsRadioNum	accessible-for-notify	Radio number of the AP which reported this rogue during a detection sweep. This object is used within notifications and is not accessible.
INT rbtwsRadioRssi	1.3.6.1.4.1.52.4.15.1.2.8	INTEGER	accessible-for-notify	The received signal strength as measured by the AP radio which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. Not used by any notification.
OCT rbtwsRadioBSSID	1.3.6.1.4.1.52.4.15.1.2.9	OCTET STRING	accessible-for-notify	The basic service set identifier of the rogue from the beacon frame reported by the AP during a detection sweep. This object is used within notifications and is not accessible.
STR rbtwsUserName	1.3.6.1.4.1.52.4.15.1.2.10	DisplayString	accessible-for-notify	The client user name as learned from the AAA process. This object is used within notifications and is not accessible.
IP rbtwsClientAuthServerIp	1.3.6.1.4.1.52.4.15.1.2.11	IpAddress	accessible-for-notify	The client authentication server ip address. This object is used within notifications and is not accessible.
RBT rbtwsClientSessionState	1.3.6.1.4.1.52.4.15.1.2.12	RbtwsClientSessionState	accessible-for-notify	The state for a client session. This object is used within notifications and is not accessible.
INT rbtwsDAPNum	1.3.6.1.4.1.52.4.15.1.2.13	INTEGER	accessible-for-notify	The DAP number on the wireless switch. This object is used within notifications and is not accessible.
IP rbtwsClientIp	1.3.6.1.4.1.52.4.15.1.2.14	IpAddress	accessible-for-notify	The client ip address. This object is used within notifications and is not accessible.
STR rbtwsClientSessionId	1.3.6.1.4.1.52.4.15.1.2.15	DisplayString	accessible-for-notify	The unique global id for a client session. This object is used within notifications and is not accessible.
RBT rbtwsClientAuthenProtocolType	1.3.6.1.4.1.52.4.15.1.2.16	RbtwsClientAuthenProtocolType	accessible-for-notify	The authentication protocol for a client. This object is used within notifications and is not accessible.
STR rbtwsClientVLANName	1.3.6.1.4.1.52.4.15.1.2.17	DisplayString	accessible-for-notify	The vlan name a client is on. This object is used within notifications and is not accessible.
TIK rbtwsClientSessionStartTime	1.3.6.1.4.1.52.4.15.1.2.18	TimeTicks	accessible-for-notify	The start time of a client session, relative to the sysUptime. This object is used within notifications and is not accessible. Obsolete. Do not use it because it's not vital information and often cannot be implemented to match the declared semantics: a client session might have been created on another wireless switch, before the current switch booted (the local zero of sysUptime).
STR rbtwsClientFailureCause	1.3.6.1.4.1.52.4.15.1.2.19	DisplayString	accessible-for-notify	Display string for possible failure cause for a client session. This object is used within notifications and is not accessible.
INT rbtwsClientRoamedFromPortNum	1.3.6.1.4.1.52.4.15.1.2.20	INTEGER	accessible-for-notify	The port number on the AC a client has roamed from. This object is used within notifications and is not accessible.
RBT rbtwsClientRoamedFromRadioNum	1.3.6.1.4.1.52.4.15.1.2.21	RbtwsRadioNum	accessible-for-notify	The radio number of the AP the client is roamed from. This object is used within notifications and is not accessible.
INT rbtwsClientRoamedFromDAPNum	1.3.6.1.4.1.52.4.15.1.2.22	INTEGER	accessible-for-notify	The DAP number on the AC which reported this rogue during roam. This object is used within notifications and is not accessible.
STR rbtwsUserParams	1.3.6.1.4.1.52.4.15.1.2.23	DisplayString	accessible-for-notify	A display string of User Parameters for client user authorization attributes learned through AAA and/or used by the system. Note that the syntax will be (name=value, name=value,..) for the parsing purpose. This object is used within notifications and is not accessible.
INT rbtwsClientLocationPolicyIndex	1.3.6.1.4.1.52.4.15.1.2.24	INTEGER	accessible-for-notify	Index of the Location Policy rule applied to a user. This object is used within notifications and is not accessible.
RBT rbtwsClientAssociationFailureCause	1.3.6.1.4.1.52.4.15.1.2.25	RbtwsAssociationFailureType	accessible-for-notify	The client association failure cause. This object is used within notifications and is not accessible.
RBT rbtwsClientAuthenticationFailureCause	1.3.6.1.4.1.52.4.15.1.2.26	RbtwsAuthenticationFailureType	accessible-for-notify	The client authentication failure cause. This object is used within notifications and is not accessible.
RBT rbtwsClientAuthorizationFailureCause	1.3.6.1.4.1.52.4.15.1.2.27	RbtwsAuthorizationFailureType	accessible-for-notify	The client authorization failure cause. Note that if it is the user-param, we would additionally expect the failure cause description to list the user attribute value that caused the failure. This object is used within notifications and is not accessible.
STR rbtwsClientFailureCauseDescription	1.3.6.1.4.1.52.4.15.1.2.28	DisplayString	accessible-for-notify	Display string for describing the client failure cause. This object is used within notifications and is not accessible.
IP rbtwsClientRoamedFromWsIp	1.3.6.1.4.1.52.4.15.1.2.29	IpAddress	accessible-for-notify	The system IP address of the AC (wireless switch) a client roamed from. This object is used within notifications and is not accessible.
RBT rbtwsClientRoamedFromAccessType	1.3.6.1.4.1.52.4.15.1.2.30	RbtwsAccessType	accessible-for-notify	The client access type (ap, dap, wired) that a client roamed from. This object is used within notifications and is not accessible.
RBT rbtwsClientAccessType	1.3.6.1.4.1.52.4.15.1.2.31	RbtwsAccessType	accessible-for-notify	The client access type (ap, dap, wired). This object is used within notifications and is not accessible. For new traps, use rbtwsClientAccessMode instead of this object.
MAC rbtwsRadioMACAddress	1.3.6.1.4.1.52.4.15.1.2.32	MacAddress	accessible-for-notify	AP Radio MAC address. This object is used within notifications and is not accessible.
RBT rbtwsRadioPowerChangeReason	1.3.6.1.4.1.52.4.15.1.2.33	RbtwsRadioPowerChangeType	accessible-for-notify	The type of event that caused an AP radio power change; occurs due to auto-tune operation. This object is used within notifications and is not accessible.
INT rbtwsNewChannelNum	1.3.6.1.4.1.52.4.15.1.2.34	INTEGER	accessible-for-notify	New channel number of the AP radio used after an auto tune event. This object is used within notifications and is not accessible.
INT rbtwsOldChannelNum	1.3.6.1.4.1.52.4.15.1.2.35	INTEGER	accessible-for-notify	Old channel number of the AP radio used before an auto tune event. This object is used within notifications and is not accessible.
RBT rbtwsChannelChangeReason	1.3.6.1.4.1.52.4.15.1.2.36	RbtwsChannelChangeType	accessible-for-notify	The type of event that caused an AP radio channel change; occurs due to auto-tune operation. This object is used within notifications and is not accessible.
OCT rbtwsRFDetectListenerListInfo	1.3.6.1.4.1.52.4.15.1.2.37	OCTET STRING	accessible-for-notify	The RF Detection Listener list info including a list of (listener mac, rssi, channel, ssid, time). There will be a maximum of 6 entries in the list. Formats: MAC: 18 bytes: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X RSSI: 10 bytes: %10d CHANNEL: 3 bytes: %3d SSID: 32 bytes: %s TIME: 26 bytes: %s Maximum size per entry is 89+4+2 = 95 bytes. Maximum size of the string is 6*95= 571 bytes (include NULL). This object is used within notifications and is not accessible.
STR rbtwsRadioSSID	1.3.6.1.4.1.52.4.15.1.2.38	DisplayString	accessible-for-notify	The radio SSID string This object is used within notifications and is not accessible.
RBT rbtwsNewPowerLevel	1.3.6.1.4.1.52.4.15.1.2.39	RbtwsPowerLevel	accessible-for-notify	New power level of the AP radio used after an auto tune event. This object is used within notifications and is not accessible.
RBT rbtwsOldPowerLevel	1.3.6.1.4.1.52.4.15.1.2.40	RbtwsPowerLevel	accessible-for-notify	Old power level of the AP radio used before an auto tune event. This object is used within notifications and is not accessible.
STR rbtwsRadioPowerChangeDescription	1.3.6.1.4.1.52.4.15.1.2.41	DisplayString	accessible-for-notify	The radio power change description. In the case of reason being dup-pkts-threshold-exceed(1), and retransmit-threshold-exceed(2), clientMacAddress will be included in the description. This object is used within notifications and is not accessible.
STR rbtwsCounterMeasurePerformerListInfo	1.3.6.1.4.1.52.4.15.1.2.42	DisplayString	accessible-for-notify	A list of information for APs performing Counter Measures including a list of performer mac addresses. This object is used within notifications and is not accessible. Not used by any notification.
RBT rbtwsClientDot1xState	1.3.6.1.4.1.52.4.15.1.2.43	RbtwsClientDot1xState	accessible-for-notify	The state for a client 802.1X. This object is used within notifications and is not accessible.
RBT rbtwsClientDot1xFailureCause	1.3.6.1.4.1.52.4.15.1.2.44	RbtwsDot1xFailureType	accessible-for-notify	The client 802.1X failure cause. This object is used within notifications and is not accessible.
RBT rbtwsAPAccessType	1.3.6.1.4.1.52.4.15.1.2.45	RbtwsAccessType	accessible-for-notify	The access point access type (ap, dap,). This object is used within notifications and is not accessible. Not used by any notification.
RBT rbtwsUserAccessType	1.3.6.1.4.1.52.4.15.1.2.46	RbtwsUserAccessType	accessible-for-notify	The user access type (MAC, WEB, DOT1X, LAST-RESORT). This object is used within notifications and is not accessible.
TIK rbtwsClientSessionElapsedTime	1.3.6.1.4.1.52.4.15.1.2.47	TimeTicks	accessible-for-notify	The elapsed time for a client session. Obsoleted because session time is usually reported in seconds. This object is used within notifications and is not accessible.
INT rbtwsLocalId	1.3.6.1.4.1.52.4.15.1.2.48	INTEGER	accessible-for-notify	Local Id for the session. This object is used within notifications and is not accessible.
RBT rbtwsRFDetectDoSType	1.3.6.1.4.1.52.4.15.1.2.49	RbtwsRFDetectDoSType	accessible-for-notify	The type of denial of service (DoS) attack. This object is used within notifications and is not accessible.
IP rbtwsSourceWsIp	1.3.6.1.4.1.52.4.15.1.2.50	IpAddress	accessible-for-notify	IP address of another AC (wireless switch). This object is used within notifications and is not accessible.
INT rbtwsClientVLANid	1.3.6.1.4.1.52.4.15.1.2.51	INTEGER	accessible-for-notify	VLAN ID used by client traffic. This object is used within notifications and is not accessible.
INT rbtwsClientVLANtag	1.3.6.1.4.1.52.4.15.1.2.52	INTEGER	accessible-for-notify	VLAN tag used by client traffic. This object is used within notifications and is not accessible.
STR rbtwsDeviceModel	1.3.6.1.4.1.52.4.15.1.2.53	DisplayString	accessible-for-notify	The model of a device in printable US-ASCII. If unknown (or not available), then the value is a zero length string. This object is used within notifications and is not accessible.
RBT rbtwsDeviceSerNum	1.3.6.1.4.1.52.4.15.1.2.54	RbtwsApSerialNum	accessible-for-notify	The serial number of an AP in printable US-ASCII. If unknown (or not available), then the value is a zero length string. Should NOT be used to identify other devices, for example an AC (wireless switch). This object is used within notifications and is not accessible.
NUM rbtwsRsaPubKeyFingerPrint	1.3.6.1.4.1.52.4.15.1.2.55	RbtwsApFingerprint	accessible-for-notify	The hash of the RSA public key (of a key pair) in binary form that uniquely identifies the public key of an AP. This object is used within notifications and is not accessible.
INT rbtwsDAPconnectWarningType	1.3.6.1.4.1.52.4.15.1.2.56	INTEGER	accessible-for-notify	The type of DAP connect warning. The values are: not-configured-fingerprint-connect(1)...a DAP, which has an RSA keypair but did not have its fingerprint configured on the AC, has connected to the AC when 'dap security' set to 'OPTIONAL' secure-handshake-failure(2).............a DAP tried to connect to the AC with security, but the handshake failed not-configured-fingerprint-required(3)..a DAP tried to connect to the AC with security, but 'dap security' set to 'REQUIRED', and no fingerprint was configured for the DAP fingerprint-mismatch(4).................a DAP tried to connect to the AC with security and its fingerprint was configured, but the fingerprint did not match the computed one This object is used within notifications and is not accessible.
MAC rbtwsClientMACAddress2	1.3.6.1.4.1.52.4.15.1.2.57	MacAddress	accessible-for-notify	MAC address of the second client of interest. This object is used within notifications and is not accessible.
RBT rbtwsApAttachType	1.3.6.1.4.1.52.4.15.1.2.58	RbtwsApAttachType	accessible-for-notify	How the AP is attached to the AC (directly or via L2/L3 network). This object is used within notifications and is not accessible.
RBT rbtwsApPortOrDapNum	1.3.6.1.4.1.52.4.15.1.2.59	RbtwsApPortOrDapNum	accessible-for-notify	The Port Number if the AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. This object is used within notifications and is not accessible. Obsoleted by rbtwsApNum. (In 6.0, direct- and network-attached APs were unified.)
STR rbtwsApName	1.3.6.1.4.1.52.4.15.1.2.60	DisplayString	accessible-for-notify	The name of the AP, as assigned in AC's CLI; defaults to AP (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). This object is used within notifications and is not accessible.
RBT rbtwsApTransition	1.3.6.1.4.1.52.4.15.1.2.61	RbtwsApTransition	accessible-for-notify	AP state Transition, as seen by the AC. This object is used within notifications and is not accessible.
RBT rbtwsApFailDetail	1.3.6.1.4.1.52.4.15.1.2.62	RbtwsApFailDetail	accessible-for-notify	Detailed failure code for some of the transitions specified in 'rbtwsApTransition' object. This object is used within notifications and is not accessible.
RBT rbtwsRadioType	1.3.6.1.4.1.52.4.15.1.2.63	RbtwsRadioType	accessible-for-notify	Indicates the AP Radio Type, as seen by AC. This object is used within notifications and is not accessible.
RBT rbtwsRadioConfigState	1.3.6.1.4.1.52.4.15.1.2.64	RbtwsRadioConfigState	accessible-for-notify	Indicates the Radio State, as seen by the AC. This object is used within notifications and is not accessible.
RBT rbtwsApConnectSecurityType	1.3.6.1.4.1.52.4.15.1.2.65	RbtwsApConnectSecurityType	accessible-for-notify	Indicates the security level of the connection between AP and AC. This object is used within notifications and is not accessible.
RBT rbtwsApServiceAvailability	1.3.6.1.4.1.52.4.15.1.2.66	RbtwsApServiceAvailability	accessible-for-notify	Indicates the level of wireless service availability. This object is used within notifications and is not accessible.
RBT rbtwsApWasOperational	1.3.6.1.4.1.52.4.15.1.2.67	RbtwsApWasOperational	accessible-for-notify	Indicates whether the AP was operational before a transition occured. This object is used within notifications and is not accessible.
U32 rbtwsClientTimeSinceLastRoam	1.3.6.1.4.1.52.4.15.1.2.68	Unsigned32	accessible-for-notify	The time in seconds since the most recent roam of a given client. This object is used within notifications and is not accessible.
RBT rbtwsClientIpAddrChangeReason	1.3.6.1.4.1.52.4.15.1.2.69	RbtwsClientIpAddrChangeReason	accessible-for-notify	Indicates the reason why client IP address changed. This object is used within notifications and is not accessible.
MAC rbtwsRFDetectRogueAPMacAddr	1.3.6.1.4.1.52.4.15.1.2.70	MacAddress	accessible-for-notify	Describes the MAC address of the Rogue AP the transmitter is connected to. This object is used within notifications and is not accessible.
U32 rbtwsBlacklistingRemainingTime	1.3.6.1.4.1.52.4.15.1.2.71	Unsigned32	accessible-for-notify	The time in seconds remaining until a given transmitter could be removed from the Black List. This object is used within notifications and is not accessible.
RBT rbtwsBlacklistingCause	1.3.6.1.4.1.52.4.15.1.2.72	RbtwsBlacklistingCause	accessible-for-notify	Indicates the reason why a given transmitter is blacklisted. This object is used within notifications and is not accessible.
U32 rbtwsNumLicensedActiveAPs	1.3.6.1.4.1.52.4.15.1.2.73	Unsigned32	accessible-for-notify	Indicates the maximum (licensed) number of active APs for this AC. This object is used within notifications and is not accessible.
IP rbtwsClientDynAuthorClientIp	1.3.6.1.4.1.52.4.15.1.2.74	IpAddress	accessible-for-notify	The dynamic authorization client IP address which caused the change of authorization. This object is used within notifications and is not accessible.
RBT rbtwsChangedUserParamOldValues	1.3.6.1.4.1.52.4.15.1.2.75	RbtwsUserAttributeList	accessible-for-notify	A display string listing the changed AAA attributes and their values, before the change of authorization was executed. This object is used within notifications and is not accessible.
RBT rbtwsChangedUserParamNewValues	1.3.6.1.4.1.52.4.15.1.2.76	RbtwsUserAttributeList	accessible-for-notify	A display string listing the changed AAA attributes and their values, after the change of authorization was executed. This object is used within notifications and is not accessible.
RBT rbtwsClientDisconnectSource	1.3.6.1.4.1.52.4.15.1.2.77	RbtwsSessionDisconnectType	accessible-for-notify	The external source that initiated the termination of a session. This object is used within notifications and is not accessible.
STR rbtwsClientDisconnectDescription	1.3.6.1.4.1.52.4.15.1.2.78	DisplayString	accessible-for-notify	Display string for providing available information related to the external source that initiated a session termination. This object is used within notifications and is not accessible.
IP rbtwsMobilityDomainSecondarySeedIp	1.3.6.1.4.1.52.4.15.1.2.79	IpAddress	accessible-for-notify	The secondary seed IP address to which the Mobility Domain has failed over. This object is used within notifications and is not accessible.
IP rbtwsMobilityDomainPrimarySeedIp	1.3.6.1.4.1.52.4.15.1.2.80	IpAddress	accessible-for-notify	The primary seed IP address to which the Mobility Domain has failed back. This object is used within notifications and is not accessible.
RBT rbtwsRFDetectClassificationReason	1.3.6.1.4.1.52.4.15.1.2.81	RbtwsRFDetectClassificationReason	accessible-for-notify	Indicates the reason why a RF device is classified the way it is. This object is used within notifications and is not accessible.
STR rbtwsConfigSaveFileName	1.3.6.1.4.1.52.4.15.1.2.82	DisplayString	accessible-for-notify	Display string listing the name of the file to which the running configuration was saved. This object is used within notifications and is not accessible.
RBT rbtwsConfigSaveInitiatorType	1.3.6.1.4.1.52.4.15.1.2.83	RbtwsConfigSaveInitiatorType	accessible-for-notify	Indicates the source that initiated a configuration save. This object is used within notifications and is not accessible.
IP rbtwsConfigSaveInitiatorIp	1.3.6.1.4.1.52.4.15.1.2.84	IpAddress	accessible-for-notify	The IP address of the source that initiated a configuration save. This object is used within notifications and is not accessible.
STR rbtwsConfigSaveInitiatorDetails	1.3.6.1.4.1.52.4.15.1.2.85	DisplayString	accessible-for-notify	Display string listing additional information regarding the source that initiated a configuration save, when available. This object is used within notifications and is not accessible.
C32 rbtwsConfigSaveGeneration	1.3.6.1.4.1.52.4.15.1.2.86	Counter32	accessible-for-notify	Indicates the number of configuration changes since the last system boot. The generation count is used to track the number of times the running configuration has been changed due to administrative actions (set/clear), SNMP requests (SET), XML requests (e.g. RASM). This object is used within notifications and is not accessible.
RBT rbtwsApNum	1.3.6.1.4.1.52.4.15.1.2.87	RbtwsApNum	accessible-for-notify	The administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. This object is used within notifications and is not accessible. Obsoletes rbtwsApPortOrDapNum. For clarity, use this object to identify an AP since in 6.0 directly attached APs and DAPs were unified.
RBT rbtwsRadioMode	1.3.6.1.4.1.52.4.15.1.2.88	RbtwsRadioMode	accessible-for-notify	Indicates the administratively controlled Radio Mode (enabled/disabled/sentry). This object is used within notifications and is not accessible.
RBT rbtwsMichaelMICFailureCause	1.3.6.1.4.1.52.4.15.1.2.89	RbtwsMichaelMICFailureCause	accessible-for-notify	Indicates the Michael MIC Failure cause / who detected it. This object is used within notifications and is not accessible.
RBT rbtwsClientAccessMode	1.3.6.1.4.1.52.4.15.1.2.90	RbtwsClientAccessMode	accessible-for-notify	The client access mode (ap, wired). This object is used within notifications and is not accessible. Intended to replace rbtwsClientAccessType. (In 6.0, direct- and network-attached APs were unified.)
RBT rbtwsClientAuthorizationReason	1.3.6.1.4.1.52.4.15.1.2.91	RbtwsClientAuthorizationReason	accessible-for-notify	Indicates the reason why client performed AAA authorization. This object is used within notifications and is not accessible.
U32 rbtwsPhysPortNum	1.3.6.1.4.1.52.4.15.1.2.92	Unsigned32	accessible-for-notify	Physical Port Number on the AC. Zero means the port is unknown or not applicable (for example, when rbtwsClientAccessMode = 'ap'). This object is used within notifications and is not accessible.
IP rbtwsApMgrOldIp	1.3.6.1.4.1.52.4.15.1.2.93	IpAddress	accessible-for-notify	The IP address of the AP's former primary manager switch. This object is used within notifications and is not accessible.
IP rbtwsApMgrNewIp	1.3.6.1.4.1.52.4.15.1.2.94	IpAddress	accessible-for-notify	The IP address of the AP's new primary manager switch. This address was formerly the AP's secondary backup link. This object is used within notifications and is not accessible.
RBT rbtwsApMgrChangeReason	1.3.6.1.4.1.52.4.15.1.2.95	RbtwsApMgrChangeReason	accessible-for-notify	Indicates the reason why the AP's primary manager changed. This object is used within notifications and is not accessible.
RBT rbtwsClientClearedReason	1.3.6.1.4.1.52.4.15.1.2.96	RbtwsClientClearedReason	accessible-for-notify	Indicates the reason why client was cleared. This object is used within notifications and is not accessible.
RBT rbtwsMobilityDomainResiliencyStatus	1.3.6.1.4.1.52.4.15.1.2.97	RbtwsMobilityDomainResiliencyStatus	accessible-for-notify	Indicates the current resilient capacity status for a mobility domain. This object is used within notifications and is not accessible.
U32 rbtwsClientSessionElapsedSeconds	1.3.6.1.4.1.52.4.15.1.2.98	Unsigned32	accessible-for-notify	Indicates the time in seconds elapsed since the start of the Client Session. This object is used within notifications and is not accessible.
RBT rbtwsRadioChannelWidth	1.3.6.1.4.1.52.4.15.1.2.99	RbtwsRadioChannelWidth	accessible-for-notify	Indicates the administratively controlled Channel Width (20MHz/40MHz). This object is used within notifications and is not accessible.
RBT rbtwsRadioMimoState	1.3.6.1.4.1.52.4.15.1.2.100	RbtwsRadioMimoState	accessible-for-notify	Indicates the Radio MIMO State, as seen by the AC (1x1/2x3/3x3). This object is used within notifications and is not accessible.
RBT rbtwsClientRadioType	1.3.6.1.4.1.52.4.15.1.2.101	RbtwsRadioType	accessible-for-notify	Indicates the Client Radio Type, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible.
RBT rbtwsRFDetectXmtrRadioType	1.3.6.1.4.1.52.4.15.1.2.102	RbtwsRadioType	accessible-for-notify	Indicates the Radio Type of the Transmitter, as detected by an attached AP and reported to the AC. The Transmitter may be a wireless client or an AP. This object is used within notifications and is not accessible.
RBT rbtwsRFDetectXmtrCryptoType	1.3.6.1.4.1.52.4.15.1.2.103	RbtwsCryptoType	accessible-for-notify	Indicates the Crypto Type used by the Transmitter, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible.
RBT rbtwsClusterFailureReason	1.3.6.1.4.1.52.4.15.1.2.104	RbtwsClusterFailureReason	accessible-for-notify	Indicates the reason why cluster configuration failed to apply. This object is used within notifications and is not accessible.
STR rbtwsClusterFailureDescription	1.3.6.1.4.1.52.4.15.1.2.105	DisplayString	accessible-for-notify	Display string for describing the cluster configuration failure cause. This object is used within notifications and is not accessible.
rbtwsTrapMib	1.3.6.1.4.1.52.4.15.1.4.1			Notifications emitted by Enterasys Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2008 Enterasys Networks, Inc. All rights reserved. This SNMP Management Information Base Specification (Specification) embodies confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Enterasys Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
rbtwsTrapsV2	1.3.6.1.4.1.52.4.15.1.5.0
NTF rbtwsDeviceFailTrap	1.3.6.1.4.1.52.4.15.1.5.0.1			The device has a failure indication
NTF rbtwsDeviceOkayTrap	1.3.6.1.4.1.52.4.15.1.5.0.2			The device has recovered
NTF rbtwsPoEFailTrap	1.3.6.1.4.1.52.4.15.1.5.0.3			PoE has failed on the indicated port
NTF rbtwsApTimeoutTrap	1.3.6.1.4.1.52.4.15.1.5.0.4			The AP entering the AC at port rbtwsPortNum with MAC rbtwsRadioMacAddress and of the access type (ap or dap) has not responded. Replaced by rbtwsApNonOperStatusTrap2, with rbtwsApTransition = 'timeout'.
NTF rbtwsAPBootTrap	1.3.6.1.4.1.52.4.15.1.5.0.5			The AP entering the AC at port rbtwsPortNum with MAC rbtwsRadioMacAddress and of the access type (ap or dap) has booted. Replaced by rbtwsApNonOperStatusTrap2, with rbtwsApTransition = 'bootSuccess'.
NTF rbtwsMobilityDomainJoinTrap	1.3.6.1.4.1.52.4.15.1.5.0.6			The mobility domain member has received an UP notice from the remote address.
NTF rbtwsMobilityDomainTimeoutTrap	1.3.6.1.4.1.52.4.15.1.5.0.7			The mobility domain member has declared the remote address to be DOWN.
NTF rbtwsMpMichaelMICFailure	1.3.6.1.4.1.52.4.15.1.5.0.8			Two Michael MIC failures were seen within 60 seconds of each other. Obsoleted by rbtwsMichaelMICFailure.
NTF rbtwsRFDetectRogueAPTrap	1.3.6.1.4.1.52.4.15.1.5.0.9			This trap is sent when RF detection finds a rogue AP. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectRogueDeviceTrap2.
NTF rbtwsRFDetectAdhocUserTrap	1.3.6.1.4.1.52.4.15.1.5.0.10			This trap is sent when RF detection sweep finds a ad-hoc user. rbtwsRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. rbtwsRFDetectListenerListInfo is a display string of a list of listener information.
NTF rbtwsRFDetectRogueDisappearTrap	1.3.6.1.4.1.52.4.15.1.5.0.11			This trap is sent when a rogue has disappeared. Obsoleted by rbtwsRFDetectRogueDeviceDisappearTrap.
NTF rbtwsClientAuthenticationFailureTrap	1.3.6.1.4.1.52.4.15.1.5.0.12			This trap is sent if a client authentication fails.
NTF rbtwsClientAuthorizationFailureTrap	1.3.6.1.4.1.52.4.15.1.5.0.13			This trap is sent if a client authorization fails.
NTF rbtwsClientAssociationFailureTrap	1.3.6.1.4.1.52.4.15.1.5.0.14			This trap is sent if a client association fails.
NTF rbtwsClientAuthorizationSuccessTrap	1.3.6.1.4.1.52.4.15.1.5.0.15			This trap is sent when a client authorizes. Obsoleted by rbtwsClientAuthorizationSuccessTrap4.
NTF rbtwsClientDeAssociationTrap	1.3.6.1.4.1.52.4.15.1.5.0.16			This trap is sent if a client de-association occurred.
NTF rbtwsClientRoamingTrap	1.3.6.1.4.1.52.4.15.1.5.0.17			This trap is sent if a client roams from one location to another.
NTF rbtwsAutoTuneRadioPowerChangeTrap	1.3.6.1.4.1.52.4.15.1.5.0.18			This trap is sent if a radio's power level has changed based on auto-tune.
NTF rbtwsAutoTuneRadioChannelChangeTrap	1.3.6.1.4.1.52.4.15.1.5.0.19			This trap is sent if a radio's channel has changed based on auto-tune.
NTF rbtwsCounterMeasureStartTrap	1.3.6.1.4.1.52.4.15.1.5.0.20			This trap is sent when counter measures are started against a rogue. rbtwsRFDetectXmtrMacAddr is the mac address of the rogue we are doing counter measures against. rbtwsRadioMACAddress identifies the radio performing the countermeasures.
NTF rbtwsCounterMeasureStopTrap	1.3.6.1.4.1.52.4.15.1.5.0.21			This trap is sent when counter measures are stopped against a rogue. rbtwsRFDetectXmtrMacAddr is the mac address of the rogue we were doing counter measures against. rbtwsRadioMACAddress identifies the radio performing the countermeasures.
NTF rbtwsClientDot1xFailureTrap	1.3.6.1.4.1.52.4.15.1.5.0.22			This trap is sent if a client failed 802.1X.
NTF rbtwsClientClearedTrap	1.3.6.1.4.1.52.4.15.1.5.0.23			This trap is sent when a client session is cleared. Obsoleted by rbtwsClientClearedTrap2.
NTF rbtwsClientAuthorizationSuccessTrap2	1.3.6.1.4.1.52.4.15.1.5.0.24			This trap is sent when a client authorizes. Obsoleted by rbtwsClientAuthorizationSuccessTrap4.
NTF rbtwsRFDetectSpoofedMacAPTrap	1.3.6.1.4.1.52.4.15.1.5.0.25			This trap is sent when RF detection finds an AP using the MAC of the listener. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectDoSTrap and rbtwsRFDetectRogueDeviceTrap2. One of the two traps will be sent depending on the type of AP MAC spoofing detected.
NTF rbtwsRFDetectSpoofedSsidAPTrap	1.3.6.1.4.1.52.4.15.1.5.0.26			This trap is sent when RF detection finds an AP using the SSID of the listener, and the AP is not in the mobility domain. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectRogueDeviceTrap2 and rbtwsRFDetectSuspectDeviceTrap2. One of the two traps will be sent, depending on RF detection classification rules.
NTF rbtwsRFDetectDoSTrap	1.3.6.1.4.1.52.4.15.1.5.0.27			This trap is sent when RF detection finds a denial of service (DoS) occurring. rbtwsRFDetectDoSType specifies the type of DoS. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information.
NTF rbtwsRFDetectClientViaRogueWiredAPTrap	1.3.6.1.4.1.52.4.15.1.5.0.28			This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. rbtwsSourceWsIp is the IP address of the AC (switch) with the wired port. rbtwsPortNum is the port on the AC. rbtwsClientVLANid is the VLAN ID of the client's traffic. rbtwsClientVLANtag is the VLAN tag of the client's traffic. rbtwsRFDetectXmtrMacAddr is the MAC address of the client. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectClientViaRogueWiredAPTrap3.
NTF rbtwsRFDetectInterferingRogueAPTrap	1.3.6.1.4.1.52.4.15.1.5.0.29			This trap is sent when RF detection finds an interfering rogue AP. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectSuspectDeviceTrap2.
NTF rbtwsRFDetectInterferingRogueDisappearTrap	1.3.6.1.4.1.52.4.15.1.5.0.30			This trap is sent when an interfering rogue has disappeared. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. Obsoleted by rbtwsRFDetectSuspectDeviceDisappearTrap.
NTF rbtwsRFDetectUnAuthorizedSsidTrap	1.3.6.1.4.1.52.4.15.1.5.0.31			This trap is sent when RF detection finds use of an unauthorized SSID. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectRogueDeviceTrap2 and rbtwsRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized SSID is classified as rogue or suspect because of this.
NTF rbtwsRFDetectUnAuthorizedOuiTrap	1.3.6.1.4.1.52.4.15.1.5.0.32			This trap is sent when RF detection finds use of an unauthorized OUI. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectRogueDeviceTrap2 and rbtwsRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized OUI is classified as rogue or suspect because of this.
NTF rbtwsRFDetectUnAuthorizedAPTrap	1.3.6.1.4.1.52.4.15.1.5.0.33			This trap is sent when RF detection finds operation of an unauthorized AP. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectRogueDeviceTrap2.
NTF rbtwsDAPConnectWarningTrap	1.3.6.1.4.1.52.4.15.1.5.0.34			A DAP, tried to connect to the AC. rbtwsDeviceModel provides the model of the DAP. rbtwsDeviceSerNum provides the serial number of the DAP. rbtwsRsaPubKeyFingerPrint provides the computed fingerprint of the DAP. rbtwsDAPconnectWarningType provides the type of connect warning. Replaced by rbtwsApNonOperStatusTrap2, with rbtwsApTransition = 'connectFail'.
NTF rbtwsRFDetectDoSPortTrap	1.3.6.1.4.1.52.4.15.1.5.0.35			This trap is sent when RF detection finds a denial of service (DoS) occurring. This has port and AP info instead of 'Listener info'. rbtwsRFDetectDoSType specifies the type of DoS. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsClientAccessType specifies whether wired, AP, or DAP. rbtwsPortNum (for wired or AP), the port that is used. rbtwsDAPNum (for a DAP), the ID of the DAP.
NTF rbtwsMpMichaelMICFailure2	1.3.6.1.4.1.52.4.15.1.5.0.36			Two Michael MIC failures were seen within 60 seconds of each other. Object rbtwsClientMACAddress is the source of the first failure, and object rbtwsClientMACAddress2 source of the second failure. Obsoleted by rbtwsMichaelMICFailure.
NTF rbtwsApNonOperStatusTrap	1.3.6.1.4.1.52.4.15.1.5.0.37			This trap is sent when the AP changes state and the new one is a non-operational state. Obsoleted by rbtwsApNonOperStatusTrap2.
NTF rbtwsApOperRadioStatusTrap	1.3.6.1.4.1.52.4.15.1.5.0.38			This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by rbtwsApOperRadioStatusTrap3.
NTF rbtwsClientIpAddrChangeTrap	1.3.6.1.4.1.52.4.15.1.5.0.39			This trap is sent when a client's IP address changes. The most likely case for this is when the client first connects to the network.
NTF rbtwsClientAssociationSuccessTrap	1.3.6.1.4.1.52.4.15.1.5.0.40			This trap is sent if a client association succeeds. WARNING: DO NOT enable it in normal use. It may impair switch performance! Only recommended for debugging network issues.
NTF rbtwsClientAuthenticationSuccessTrap	1.3.6.1.4.1.52.4.15.1.5.0.41			This trap is sent if a client authentication succeeds.
NTF rbtwsClientDeAuthenticationTrap	1.3.6.1.4.1.52.4.15.1.5.0.42			This trap is sent if a client de-authentication occured.
NTF rbtwsRFDetectBlacklistedTrap	1.3.6.1.4.1.52.4.15.1.5.0.43			This trap is sent if an association, re-association or de-association request (packet) is detected from a blacklisted transmitter (identified by MAC: 'rbtwsRFDetectXmtrMacAddr'). If 'rbtwsBlacklistingCause' is 'configured', then 'rbtwsBlacklistingRemainingTime' will be zero, meaning indefinite time (depending on administrative actions on the Black List). Otherwise, 'rbtwsBlacklistingRemainingTime' will indicate the time in seconds until this transmitter's requests could be allowed.
NTF rbtwsRFDetectClientViaRogueWiredAPTrap2	1.3.6.1.4.1.52.4.15.1.5.0.44			This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. rbtwsSourceWsIp is the IP address of the AC (switch) with the wired port. rbtwsPortNum is the port on the AC. rbtwsClientVLANid is the VLAN ID of the client's traffic. rbtwsClientVLANtag is the VLAN tag of the client's traffic. rbtwsRFDetectXmtrMacAddr is the MAC address of the client. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. rbtwsRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. Obsoleted by rbtwsRFDetectClientViaRogueWiredAPTrap3.
NTF rbtwsRFDetectAdhocUserDisappearTrap	1.3.6.1.4.1.52.4.15.1.5.0.45			This trap is sent when RF detection sweep finds that an ad-hoc user disappeared. rbtwsRFDetectXmtrMacAddr is the MAC address of the ad-hoc user.
NTF rbtwsApRejectLicenseExceededTrap	1.3.6.1.4.1.52.4.15.1.5.0.46			This trap is sent when an AC (wireless switch) receives a packet from an inactive AP and attaching that AP would make the AC exceed the maximum (licensed) number of active APs.
NTF rbtwsClientDynAuthorChangeSuccessTrap	1.3.6.1.4.1.52.4.15.1.5.0.47			This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client.
NTF rbtwsClientDynAuthorChangeFailureTrap	1.3.6.1.4.1.52.4.15.1.5.0.48			This trap is sent if a change of authorization request sent by an authorized dynamic authorization client is unsuccessful.
NTF rbtwsClientDisconnectTrap	1.3.6.1.4.1.52.4.15.1.5.0.49			This trap is sent when a client session is terminated administratively.
NTF rbtwsMobilityDomainFailOverTrap	1.3.6.1.4.1.52.4.15.1.5.0.50			This trap is sent when the Mobility Domain fails over to the secondary seed.
NTF rbtwsMobilityDomainFailBackTrap	1.3.6.1.4.1.52.4.15.1.5.0.51			This trap is sent when the Mobility Domain fails back to the primary seed.
NTF rbtwsRFDetectRogueDeviceTrap	1.3.6.1.4.1.52.4.15.1.5.0.52			This trap is sent when RF detection finds a rogue device. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as rogue. Obsoleted by rbtwsRFDetectRogueDeviceTrap2.
NTF rbtwsRFDetectRogueDeviceDisappearTrap	1.3.6.1.4.1.52.4.15.1.5.0.53			This trap is sent when a rogue device has disappeared. This trap obsoletes the rbtwsRFDetectRogueDisappearTrap.
NTF rbtwsRFDetectSuspectDeviceTrap	1.3.6.1.4.1.52.4.15.1.5.0.54			This trap is sent when RF detection finds a suspect device. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as suspect. Obsoleted by rbtwsRFDetectSuspectDeviceTrap2.
NTF rbtwsRFDetectSuspectDeviceDisappearTrap	1.3.6.1.4.1.52.4.15.1.5.0.55			This trap is sent when a suspect device has disappeared. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. This trap obsoletes the rbtwsRFDetectInterferingRogueDisappearTrap.
NTF rbtwsRFDetectClientViaRogueWiredAPTrap3	1.3.6.1.4.1.52.4.15.1.5.0.56			This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. rbtwsSourceWsIp is the IP address of the AC (switch) with the wired port. rbtwsPortNum is the port on the AC. rbtwsClientVLANid is the VLAN ID of the client's traffic. rbtwsClientVLANtag is the VLAN tag of the client's traffic. rbtwsRFDetectXmtrMacAddr is the MAC address of the client. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. rbtwsRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. ClassificationReason indicates the reason why the AP is classified as rogue. This trap obsoletes the rbtwsRFDetectClientViaRogueWiredAPTrap and rbtwsRFDetectClientViaRogueWiredAPTrap2.
NTF rbtwsRFDetectClassificationChangeTrap	1.3.6.1.4.1.52.4.15.1.5.0.57			This trap is sent when RF detection classification rules change.
NTF rbtwsConfigurationSavedTrap	1.3.6.1.4.1.52.4.15.1.5.0.58			This trap is sent when the running configuration of the switch is written to a configuration file.
NTF rbtwsApNonOperStatusTrap2	1.3.6.1.4.1.52.4.15.1.5.0.59			This trap is sent when the AP changes state and the new one is a non-operational state. Obsoletes rbtwsApNonOperStatusTrap.
NTF rbtwsApOperRadioStatusTrap2	1.3.6.1.4.1.52.4.15.1.5.0.60			This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by rbtwsApOperRadioStatusTrap3.
NTF rbtwsMichaelMICFailure	1.3.6.1.4.1.52.4.15.1.5.0.61			Two Michael MIC failures were seen within 60 seconds of each other. Object rbtwsClientMACAddress indicates the source of the first failure, and object rbtwsClientMACAddress2 indicates the source of the second failure. Service is interrupted for 60 seconds on the radio due to TKIP countermeasures having commenced. The radio is identified by rbtwsApNum and rbtwsAPRadioNum. An alternative way to identify the radio is rbtwsRadioMACAddress. Obsoletes rbtwsMpMichaelMICFailure and rbtwsMpMichaelMICFailure2.
NTF rbtwsClientAuthorizationSuccessTrap3	1.3.6.1.4.1.52.4.15.1.5.0.62			This trap is sent when a client authorizes. If rbtwsClientAccessMode = 'ap': rbtwsApNum, rbtwsAPRadioNum, rbtwsRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent. If rbtwsClientAccessMode = 'wired': rbtwsPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by rbtwsClientAuthorizationSuccessTrap4.
NTF rbtwsApManagerChangeTrap	1.3.6.1.4.1.52.4.15.1.5.0.63			This trap is sent when the AP's secondary link becomes its primary link.
NTF rbtwsClientClearedTrap2	1.3.6.1.4.1.52.4.15.1.5.0.64			This trap is sent when a client session is cleared. Obsoletes rbtwsClientClearedTrap.
NTF rbtwsMobilityDomainResiliencyStatusTrap	1.3.6.1.4.1.52.4.15.1.5.0.65			This trap is sent by a mobility domain seed to announce changes in resilient capacity status.
NTF rbtwsApOperRadioStatusTrap3	1.3.6.1.4.1.52.4.15.1.5.0.66			This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoletes rbtwsApOperRadioStatusTrap and rbtwsApOperRadioStatusTrap2.
NTF rbtwsClientAuthorizationSuccessTrap4	1.3.6.1.4.1.52.4.15.1.5.0.67			This trap is sent when a client authorizes. If rbtwsClientAccessMode = 'ap': rbtwsApNum, rbtwsAPRadioNum, rbtwsRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; rbtwsClientRadioType gives the type of radio used by this client. If rbtwsClientAccessMode = 'wired': rbtwsPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes rbtwsClientAuthorizationSuccessTrap, rbtwsClientAuthorizationSuccessTrap2, rbtwsClientAuthorizationSuccessTrap3.
NTF rbtwsRFDetectRogueDeviceTrap2	1.3.6.1.4.1.52.4.15.1.5.0.68			This trap is sent when RF detection finds a rogue device. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (rogue device). rbtwsRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (rogue device). rbtwsRFDetectListenerListInfo is a display string of a list of listener information. rbtwsRFDetectClassificationReason indicates the reason why the device is classified as rogue. Obsoletes rbtwsRFDetectRogueAPTrap, rbtwsRFDetectUnAuthorizedAPTrap, rbtwsRFDetectRogueDeviceTrap.
NTF rbtwsRFDetectSuspectDeviceTrap2	1.3.6.1.4.1.52.4.15.1.5.0.69			This trap is sent when RF detection finds a suspect device. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (suspect device). rbtwsRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (suspect device). rbtwsRFDetectListenerListInfo is a display string of a list of listener information. rbtwsRFDetectClassificationReason indicates the reason why the device is classified as suspect. Obsoletes rbtwsRFDetectInterferingRogueAPTrap, rbtwsRFDetectSuspectDeviceTrap.
NTF rbtwsClusterFailureTrap	1.3.6.1.4.1.52.4.15.1.5.0.70			This trap is sent when the cluster configuration failed to apply. If rbtwsClusterFailureReason = 'validation-error': The validation error is reported by the receiving end of the configuration updates. The receiving end can be any AC (switch) in the mobility domain: member, secondary seed or primary seed. - Primary seed will be the receiving end of configuration updates when Primary seed is joining the cluster and Secondary seed has preempt mode enabled. - Both Secondary seed and member will be at the receiving end when Primary seed is active.

RFC description

Enterasys Networks wireless switch MIB defining SNMP notifications for AP connectivity, radio state, and client session events.

Start monitoring Enterasys RoamAbout wireless LAN controllers and managed access points (event/fault trap notifications) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RBTWS-TRAP-MIB

What Is RBTWS-TRAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description