PACKETEER-MIB

All MIBs › PACKETEER-MIB

Category: WAN

Description: Provides SNMP management objects for Packeteer (Blue Coat) WAN optimization appliance configuration and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PACKETEER-MIB?

This is a Packeteer (later acquired by Blue Coat Systems) enterprise MIB that provides SNMP management objects for the PacketShaper family of WAN optimization and traffic-shaping appliances. It exposes configuration and statistics data related to bandwidth partitioning, traffic classes, and link utilization used to control and prioritize WAN traffic. Administrators use it to monitor both software status (policy/partition configuration) and performance counters (bandwidth utilization, packet counts per class) of the appliance, giving insight into whether traffic shaping policies are behaving as expected, though it is less focused on physical hardware sensors like temperature or fans. As a standalone vendor MIB, it does not appear to have strong dependencies on other IETF standard MIBs beyond baseline SNMP framework conventions. It is typically deployed at WAN edge locations where Packeteer/Blue Coat PacketShaper appliances shape and prioritize traffic for enterprise branch or data center links, where PACKETEER-MIB SNMP monitoring helps confirm traffic-shaping policies are behaving as intended.

IPNetwork Monitor allows you to monitor SNMP objects defined in PACKETEER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Packeteer/Blue Coat PacketShaper WAN optimization appliance

Monitoring Examples

An administrator would poll partition- and class-level utilization objects on a PacketShaper appliance to check current throughput against configured bandwidth caps for a given traffic class. A traffic class consistently exceeding its allotted partition would reveal a misconfigured policy or an unexpected surge in application traffic consuming WAN bandwidth. Because no sample objects were provided, exact table names would need to be verified against the compiled MIB tree, but typical objects follow class/partition statistics patterns that help operators keep interactive traffic prioritized over bulk transfers on constrained WAN links.

What Can Be Monitored

traffic class bandwidth utilization
partition configuration
packet counts per class
policy/shaping status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
enterprises

From RFC1213-MIB

DisplayString

From SNMPv2-TC

DateAndTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
packeteer	1.3.6.1.4.1.2334
products	1.3.6.1.4.1.2334.1
packetShaper	1.3.6.1.4.1.2334.1.1
NTF psAlarmSiteRouter	1.3.6.1.4.1.2334.1.1.0.3			A psSiteRouter trap signifies that the site router attached to the device has changed to a state of less readiness. The psAlarmSiteRouterStatus variable included with this trap provides more information.
NTF psAlarmPowerSystemOne	1.3.6.1.4.1.2334.1.1.0.4			A psPowerSystemOne trap signifies that the first power supply of the device has failed.
NTF psAlarmPowerSystemTwo	1.3.6.1.4.1.2334.1.1.0.5			A psSitePowerSystemTwo trap signifies that the second power supply of the device has failed.
NTF psAlarmFanOne	1.3.6.1.4.1.2334.1.1.0.6			A psFanOne trap signifies that the first fan of the device has failed.
NTF psAlarmFanTwo	1.3.6.1.4.1.2334.1.1.0.7			A psAlarmFanTwo trap signifies that second fan of the device has failed.
NTF psAlarmCfgFile	1.3.6.1.4.1.2334.1.1.0.8			A psAlarmCfgFile trap signifies that the configuration file of the device has been corrupted, or otherwise changed to a state of less readiness. This trap is obsolete and should not be used.
NTF psAlarmUserEvent	1.3.6.1.4.1.2334.1.1.0.9			A psAlarmUserEvent trap signifies that a user event, which has been registered by the user, has occurred. The associated variables give more information on the event.
NTF psAlarmMeasurementEngine	1.3.6.1.4.1.2334.1.1.0.10			A psAlarmMeasurementEngine trap signifies that the Measurement Engine has changed to a state of less readiness, or failed on startup.
NTF psAlarmStandby	1.3.6.1.4.1.2334.1.1.0.11			A psAlarmStandby trap signifies that the standby status of the device has changed to a state of less readiness. The psAlarmStandbyStatus variable included with this trap provides more information.
NTF psFeatureHighAvDeviceDown	1.3.6.1.4.1.2334.1.1.0.12			A psFeatureHighAvDeviceFailed trap signifies that an interface or router we are tracking has gone down. If it is an interface that went down, the bindings will show the corresponding router and the name of the interface which went down. The name will be specified as 'unknown' if we could not resolve the interface name. But if it is the router that went down, the interface name will not be specified.
NTF psAlarmAgentEvent	1.3.6.1.4.1.2334.1.1.0.13			A psAlarmAgentEvent trap signifies that an agent event, which has been triggered by the user, has occurred. The associated variables give more information on the event.
NTF psAlarmFanThree	1.3.6.1.4.1.2334.1.1.0.14			A psAlarmFanThree trap signifies that 3rd fan of the device has failed.
NTF psAlarmFanFour	1.3.6.1.4.1.2334.1.1.0.15			A psAlarmFanFour trap signifies that 4th fan of the device has failed.
packetShaper_2000	1.3.6.1.4.1.2334.1.1.1
packetShaper_4000	1.3.6.1.4.1.2334.1.1.2
packetShaper_1000	1.3.6.1.4.1.2334.1.1.3
packetShaper_2500	1.3.6.1.4.1.2334.1.1.4
packetShaper_4500	1.3.6.1.4.1.2334.1.1.5
packetShaper_1500	1.3.6.1.4.1.2334.1.1.6
packetShaper_asm50	1.3.6.1.4.1.2334.1.1.7
packetShaper_asm70	1.3.6.1.4.1.2334.1.1.8
packetShaper_asm30	1.3.6.1.4.1.2334.1.1.9
packetShaper_asm90	1.3.6.1.4.1.2334.1.1.10
packetShaper_6500	1.3.6.1.4.1.2334.1.1.11
packetShaper_8500	1.3.6.1.4.1.2334.1.1.12
packetShaper_asm110	1.3.6.1.4.1.2334.1.1.13
packetShaper_1550	1.3.6.1.4.1.2334.1.1.14
packetShaper_9500	1.3.6.1.4.1.2334.1.1.15
packetShaper_2550	1.3.6.1.4.1.2334.1.1.16
packetShaper_10000	1.3.6.1.4.1.2334.1.1.17
packeteerMibs	1.3.6.1.4.1.2334.2
psCommonMib	1.3.6.1.4.1.2334.2.1
psSettings	1.3.6.1.4.1.2334.2.1.1
INT psShapingStatusOper	1.3.6.1.4.1.2334.2.1.1.1	INTEGER	read-only	This object reflects the current operational traffic shaping status of the PacketShaper. The value of this object reflects the status of the front panel status LED. If all of the following conditions are true, then the object is set to 1, otherwise it is 2: links are up, shaping is on, and the siterouter is usable (if configured).
psLinks	1.3.6.1.4.1.2334.2.1.2
INT linkTableSize	1.3.6.1.4.1.2334.2.1.2.1	INTEGER	read-only	Number of entries in the linkTable
linkTable	1.3.6.1.4.1.2334.2.1.2.2		not-accessible	A list of link entries.
linkEntry	1.3.6.1.4.1.2334.2.1.2.2.1		not-accessible	A link entry containing containing statistical objects for a link.
INT linkIndex	1.3.6.1.4.1.2334.2.1.2.2.1.1	INTEGER	read-only	A unique ID for a link.
STR linkName	1.3.6.1.4.1.2334.2.1.2.2.1.2	DisplayString	read-only	A unique name for a link.
CTR linkByteCount	1.3.6.1.4.1.2334.2.1.2.2.1.3	Counter	read-only	The byte count in the link
CTR linkByteCountHi	1.3.6.1.4.1.2334.2.1.2.2.1.4	Counter	read-only	The High 32 bits of byte count in the link.
CTR linkPkts	1.3.6.1.4.1.2334.2.1.2.2.1.5	Counter	read-only	The packet count in the link
CTR linkDataPkts	1.3.6.1.4.1.2334.2.1.2.2.1.6	Counter	read-only	The TCP data packet count in the link
CTR linkReTxs	1.3.6.1.4.1.2334.2.1.2.2.1.7	Counter	read-only	The TCP retransmit packet count in the link
CTR linkReTxTosses	1.3.6.1.4.1.2334.2.1.2.2.1.8	Counter	read-only	The TCP tossed retransmit packet count in the link
CTR linkCirFails	1.3.6.1.4.1.2334.2.1.2.2.1.9	Counter	read-only	The count of CIR fails events in the link
CTR linkCirAllocs	1.3.6.1.4.1.2334.2.1.2.2.1.10	Counter	read-only	The count of CIR alloc events in the link
CTR linkEirAllocs	1.3.6.1.4.1.2334.2.1.2.2.1.11	Counter	read-only	The count of EIR alloc events in the link. This variable is obselete and should not be used.
GAU linkPeakTcpConns	1.3.6.1.4.1.2334.2.1.2.2.1.12	Gauge	read-only	The peak number of active TCP flows in the link.
CTR linkTcpConnInits	1.3.6.1.4.1.2334.2.1.2.2.1.13	Counter	read-only	The count of TCP flows started in the link
CTR linkTcpConnExits	1.3.6.1.4.1.2334.2.1.2.2.1.14	Counter	read-only	The count of TCP flows exited in the link
CTR linkTcpConnRefuses	1.3.6.1.4.1.2334.2.1.2.2.1.15	Counter	read-only	The count of TCP flows exited by TCP refuse in the link
CTR linkTcpConnIgnores	1.3.6.1.4.1.2334.2.1.2.2.1.16	Counter	read-only	The count of TCP flows exited by being ignored in the link.
CTR linkTcpConnAborts	1.3.6.1.4.1.2334.2.1.2.2.1.17	Counter	read-only	The count of TCP flows aborted in the link.
CTR linkTcpConnDenies	1.3.6.1.4.1.2334.2.1.2.2.1.18	Counter	read-only	The count of TCP flows denied by CIR fail in the link.
CTR linkTcpConnTimeouts	1.3.6.1.4.1.2334.2.1.2.2.1.19	Counter	read-only	The count of TCP flows timed out by pshaper in the link. This variable is obsolete and should not be used.
GAU linkPeakUdpConns	1.3.6.1.4.1.2334.2.1.2.2.1.20	Gauge	read-only	The peak number of active UDP flows in the link. This variable is deprecated, and should no longer be used.
CTR linkUdpConnInits	1.3.6.1.4.1.2334.2.1.2.2.1.21	Counter	read-only	The count of UDP flows started in the link. This variable is deprecated, and should no longer be used.
CTR linkUdpConnExits	1.3.6.1.4.1.2334.2.1.2.2.1.22	Counter	read-only	The count of UDP flows exited in the link. This variable is deprecated, and should no longer be used.
INT linkSize	1.3.6.1.4.1.2334.2.1.2.2.1.23	INTEGER	read-only	The size in bps of the link.
GAU linkRate	1.3.6.1.4.1.2334.2.1.2.2.1.24	Gauge	read-only	The peak bps of the link.
GAU linkRateAllocations	1.3.6.1.4.1.2334.2.1.2.2.1.25	Gauge	read-only	The count of rate allocations on the link. This variable is obsolete and should not be used.
GAU linkPeakGuaranteedRateFlows	1.3.6.1.4.1.2334.2.1.2.2.1.26	Gauge	read-only	The peak number of guaranteed rate flows active on the link.
GAU linkPeakRateFlows	1.3.6.1.4.1.2334.2.1.2.2.1.27	Gauge	read-only	The peak number of rate-based flows active on the link. This variable is obsolete and should not be used.
CTR linkReTxByteCount	1.3.6.1.4.1.2334.2.1.2.2.1.28	Counter	read-only	The count of retransmitted bytes on the link. This is the low-order 32 bits.
CTR linkReTxByteCountHi	1.3.6.1.4.1.2334.2.1.2.2.1.29	Counter	read-only	The count of retransmitted bytes on the link. This is the high-order 32 bits.
CTR linkTotalRxPkts	1.3.6.1.4.1.2334.2.1.2.2.1.30	Counter	read-only	The total packets received on the link.
CTR linkTotalTxPkts	1.3.6.1.4.1.2334.2.1.2.2.1.31	Counter	read-only	The total packets transmitted on the link.
CTR linkRxNoBufs	1.3.6.1.4.1.2334.2.1.2.2.1.32	Counter	read-only	The count of packets that were dropped due to unavailable buffers.
CTR linkRxPktDrops	1.3.6.1.4.1.2334.2.1.2.2.1.33	Counter	read-only	The count of packets dropped due to no buffers, no connection blocks or random dropping.
CTR linkTxPktDrops	1.3.6.1.4.1.2334.2.1.2.2.1.34	Counter	read-only	The count of transmitted packets that were dropped due to no route available, an i/o error or no buffers.
CTR linkRxErrors	1.3.6.1.4.1.2334.2.1.2.2.1.35	Counter	read-only	The count of received packets that were dropped due to hardware errors.
CTR linkTxErrors	1.3.6.1.4.1.2334.2.1.2.2.1.36	Counter	read-only	The count of transmitted packets that were dropped due to hardware errors.
CTR linkTcpAllocFails	1.3.6.1.4.1.2334.2.1.2.2.1.37	Counter	read-only	The count of TCP alloc fails on a link.
CTR linkIpdgAllocFails	1.3.6.1.4.1.2334.2.1.2.2.1.38	Counter	read-only	The count of IPDG alloc fails on a link.
CTR linkHostdbAllocFails	1.3.6.1.4.1.2334.2.1.2.2.1.39	Counter	read-only	The count of Host DB alloc fails on a link.
INT linkShapingMode	1.3.6.1.4.1.2334.2.1.2.2.1.40	INTEGER	read-only	The current shaping mode.
INT linkAutoclassifyMode	1.3.6.1.4.1.2334.2.1.2.2.1.41	INTEGER	read-only	The current autoclassification mode.
CTR linkMacSameSidePkts	1.3.6.1.4.1.2334.2.1.2.2.1.42	Counter	read-only	The total number of same-side packets on the link.
CTR linkPassthruPkts	1.3.6.1.4.1.2334.2.1.2.2.1.43	Counter	read-only	The total packets passed through on the link.
CTR linkTotalRxBytes	1.3.6.1.4.1.2334.2.1.2.2.1.44	Counter	read-only	The total number of bytes received on the link. This is the low-order 32 bits.
CTR linkTotalRxBytesHi	1.3.6.1.4.1.2334.2.1.2.2.1.45	Counter	read-only	The total number of bytes received on the link. This is the high-order 32 bits.
CTR linkTotalTxBytes	1.3.6.1.4.1.2334.2.1.2.2.1.46	Counter	read-only	The total number of bytes transmitted on the link. This is the low-order 32 bits.
CTR linkTotalTxBytesHi	1.3.6.1.4.1.2334.2.1.2.2.1.47	Counter	read-only	The total number of bytes transmitted on the link. This is the high-order 32 bits.
CTR linkClassChecks	1.3.6.1.4.1.2334.2.1.2.2.1.48	Counter	read-only	The number of traversals of the class tree.
CTR linkPassthruBytes	1.3.6.1.4.1.2334.2.1.2.2.1.49	Counter	read-only	The total number of bytes passed through on the link.
INT linkCompressionMode	1.3.6.1.4.1.2334.2.1.2.2.1.50	INTEGER	read-only	The current compression mode.
GAU linkPeakPreCompressionRate	1.3.6.1.4.1.2334.2.1.2.2.1.51	Gauge	read-only	The peak pre-compression rate on the link.
GAU linkPeakPostCompressionRate	1.3.6.1.4.1.2334.2.1.2.2.1.52	Gauge	read-only	The peak post-compression rate on the link.
CTR linkNonComprsnBytes	1.3.6.1.4.1.2334.2.1.2.2.1.53	Counter	read-only	The total number of non-compressed bytes on the link.
CTR linkNonComprsnBytesHi	1.3.6.1.4.1.2334.2.1.2.2.1.54	Counter	read-only	The total number of non-compressed bytes on the link. This is the high-order 32 bits.
CTR linkPreComprsnBytes	1.3.6.1.4.1.2334.2.1.2.2.1.55	Counter	read-only	The total number of bytes before compression on the link.
CTR linkPreComprsnBytesHi	1.3.6.1.4.1.2334.2.1.2.2.1.56	Counter	read-only	The total number of bytes before compression on the link. This is the high-order 32 bits.
CTR linkPostComprsnBytes	1.3.6.1.4.1.2334.2.1.2.2.1.57	Counter	read-only	The total number of bytes after compression on the link.
CTR linkPostComprsnBytesHi	1.3.6.1.4.1.2334.2.1.2.2.1.58	Counter	read-only	The total number of bytes after compression on the link. This is the high-order 32 bits.
psPartitions	1.3.6.1.4.1.2334.2.1.3
INT partitionTableSize	1.3.6.1.4.1.2334.2.1.3.1	INTEGER	read-only	Number of entries in the partitionTable
partitionTable	1.3.6.1.4.1.2334.2.1.3.2		not-accessible	A list of partition entries.
partitionEntry	1.3.6.1.4.1.2334.2.1.3.2.1		not-accessible	A partition entry containing statistical objects for a traffic partition.
INT partitionIndex	1.3.6.1.4.1.2334.2.1.3.2.1.1	INTEGER	read-only	A unique ID for a partition.
STR partitionName	1.3.6.1.4.1.2334.2.1.3.2.1.2	DisplayString	read-only	A unique name for a partition.
INT partitionLinkDirection	1.3.6.1.4.1.2334.2.1.3.2.1.3	INTEGER	read-only	The orientation of a partition.
CTR partitionByteCount	1.3.6.1.4.1.2334.2.1.3.2.1.4	Counter	read-only	The byte count in the partition
CTR partitionByteCountHi	1.3.6.1.4.1.2334.2.1.3.2.1.5	Counter	read-only	The high 32 bits of byte count in the partition.
CTR partitionPkts	1.3.6.1.4.1.2334.2.1.3.2.1.6	Counter	read-only	The packet count in the partition.
CTR partitionDataPkts	1.3.6.1.4.1.2334.2.1.3.2.1.7	Counter	read-only	The TCP data packet count in the partition.
CTR partitionReTxs	1.3.6.1.4.1.2334.2.1.3.2.1.8	Counter	read-only	The TCP retransmit packet count in the partition.
CTR partitionReTxTosses	1.3.6.1.4.1.2334.2.1.3.2.1.9	Counter	read-only	The TCP tossed retransmit packet count in the partition
CTR partitionCirFails	1.3.6.1.4.1.2334.2.1.3.2.1.10	Counter	read-only	The count of CIR fail events in the partition.
CTR partitionCirAllocs	1.3.6.1.4.1.2334.2.1.3.2.1.11	Counter	read-only	The count of CIR alloc events in the partition.
CTR partitionEirAllocs	1.3.6.1.4.1.2334.2.1.3.2.1.12	Counter	read-only	The count of EIR alloc events in the partition. This variable is obsolete and should not be used.
GAU partitionPeakTcpConns	1.3.6.1.4.1.2334.2.1.3.2.1.13	Gauge	read-only	The peak no. of active TCP flows in the partition.
CTR partitionTcpConnInits	1.3.6.1.4.1.2334.2.1.3.2.1.14	Counter	read-only	The count of TCP flows started in the partition.
CTR partitionTcpConnExits	1.3.6.1.4.1.2334.2.1.3.2.1.15	Counter	read-only	The count of TCP flows exited in the partition.
CTR partitionTcpConnRefuses	1.3.6.1.4.1.2334.2.1.3.2.1.16	Counter	read-only	The count of TCP flows exited by TCP refuse in the partition.
CTR partitionTcpConnIgnores	1.3.6.1.4.1.2334.2.1.3.2.1.17	Counter	read-only	The count of TCP flows exited by being ignored in the partition.
CTR partitionTcpConnAborts	1.3.6.1.4.1.2334.2.1.3.2.1.18	Counter	read-only	The count of TCP flows aborted in the partition.
CTR partitionTcpConnDenies	1.3.6.1.4.1.2334.2.1.3.2.1.19	Counter	read-only	The count of TCP flows denied by CIR fail in the partition.
CTR partitionTcpConnTimeouts	1.3.6.1.4.1.2334.2.1.3.2.1.20	Counter	read-only	The count of TCP flows timed out by pshaper in the partition. This variable is obsolete and should not be used.
GAU partitionPeakUdpConns	1.3.6.1.4.1.2334.2.1.3.2.1.21	Gauge	read-only	The peak no. of active UDP flows in the partition. This variable is deprecated, and should no longer be used.
CTR partitionUdpConnInits	1.3.6.1.4.1.2334.2.1.3.2.1.22	Counter	read-only	The count of UDP flows started in the partition. This variable is deprecated, and should no longer be used.
CTR partitionUdpConnExits	1.3.6.1.4.1.2334.2.1.3.2.1.23	Counter	read-only	The count of UDP flows exited in the partition. This variable is deprecated, and should no longer be used.
INT partitionMinimumBps	1.3.6.1.4.1.2334.2.1.3.2.1.24	INTEGER	read-only	The minimum size in bps of the partition.
INT partitionBurstLimit	1.3.6.1.4.1.2334.2.1.3.2.1.25	INTEGER	read-only	The partition burst limit in bps.
GAU partitionRate	1.3.6.1.4.1.2334.2.1.3.2.1.26	Gauge	read-only	The peak total rate in bps of the partition.
GAU partitionCirRate	1.3.6.1.4.1.2334.2.1.3.2.1.27	Gauge	read-only	The peak guaranteed rate in bps of the partition. This variable is obsolete and should not be used.
GAU partitionEirRate	1.3.6.1.4.1.2334.2.1.3.2.1.28	Gauge	read-only	The peak excess rate in bps of the partition. This variable is obsolete and should note be used.
GAU partitionUnreservedRate	1.3.6.1.4.1.2334.2.1.3.2.1.29	Gauge	read-only	The peak unreserved rate in bps of the partition. This variable is obsolete and should not be used.
GAU partitionFirstSatisfiedPriority	1.3.6.1.4.1.2334.2.1.3.2.1.30	Gauge	read-only	The peak first priority level at which demand was satisfied (0-8).
CTR partitionTimeOverLimit	1.3.6.1.4.1.2334.2.1.3.2.1.31	Counter	read-only	The total time in seconds spent over partition size for the partition
CTR partitionRateAllocations	1.3.6.1.4.1.2334.2.1.3.2.1.32	Counter	read-only	The count of rate allocations on the partition. This variable is obsolete and should not be used.
GAU partitionPeakGuaranteedRateFlows	1.3.6.1.4.1.2334.2.1.3.2.1.33	Gauge	read-only	The peak number of guaranteed rate flows active on the partition.
GAU partitionPeakRateFlows	1.3.6.1.4.1.2334.2.1.3.2.1.34	Gauge	read-only	The peak number of rate-based flows active on the partition. This variable is obsolete and should not be used.
CTR partitionReTxByteCount	1.3.6.1.4.1.2334.2.1.3.2.1.35	Counter	read-only	The count of retransmitted bytes on the partition. This is the low-order 32 bits.
CTR partitionReTxByteCountHi	1.3.6.1.4.1.2334.2.1.3.2.1.36	Counter	read-only	The count of retransmitted bytes on the partition. This is the high-order 32 bits.
CTR partitionDynamicCapCount	1.3.6.1.4.1.2334.2.1.3.2.1.37	Counter	read-only	The count of dynamic partition reaching caps.
CTR partitionDynamicNoCount	1.3.6.1.4.1.2334.2.1.3.2.1.38	Counter	read-only	The count of unavailable dynamic partition .
GAU partitionDynamicLiveUserCount	1.3.6.1.4.1.2334.2.1.3.2.1.39	Gauge	read-only	The count of total live dynamic partition user.
CTR partitionCommittmentFailures	1.3.6.1.4.1.2334.2.1.3.2.1.40	Counter	read-only	The number of minute intervals that were not given the minimum programmed bandwidth.
GAU partitionLateDropPktCount	1.3.6.1.4.1.2334.2.1.3.2.1.41	Gauge	read-only	The count of number of late drops in the partition. This is the low-order 32 bits.
GAU partitionLateDropPktCountHi	1.3.6.1.4.1.2334.2.1.3.2.1.42	Gauge	read-only	The count of number of late drops in the partition . This is the high-order 32 bits.
GAU partitionLateDropByteCount	1.3.6.1.4.1.2334.2.1.3.2.1.43	Gauge	read-only	The count of late drop bytes in the partition. This is the low-order 32 bits.
GAU partitionLateDropByteCountHi	1.3.6.1.4.1.2334.2.1.3.2.1.44	Gauge	read-only	The count of late drop bytes in the partition . This is the high-order 32 bits.
GAU partitionSchedDropPktCount	1.3.6.1.4.1.2334.2.1.3.2.1.45	Gauge	read-only	The count of number of scheduler drops in the partition. This is the low-order 32 bits.
GAU partitionSchedDropPktCountHi	1.3.6.1.4.1.2334.2.1.3.2.1.46	Gauge	read-only	The count of number of scheduler drops in the partition . This is the high-order 32 bits.
GAU partitionSchedDropByteCount	1.3.6.1.4.1.2334.2.1.3.2.1.47	Gauge	read-only	The count of scheduler drop bytes in the partition. This is the low-order 32 bits.
GAU partitionSchedDropByteCountHi	1.3.6.1.4.1.2334.2.1.3.2.1.48	Gauge	read-only	The count of scheduler drop bytes in the partition . This is the high-order 32 bits.
CTR partitionFrameBytes	1.3.6.1.4.1.2334.2.1.3.2.1.49	Counter	read-only	The number of PVC bytes in the partition. This is the low-order 32 bits.
CTR partitionFrameBytesHi	1.3.6.1.4.1.2334.2.1.3.2.1.50	Counter	read-only	The number of PVC bytes in the partition . This is the high-order 32 bits.
GAU partitionFrameTargetRate	1.3.6.1.4.1.2334.2.1.3.2.1.51	Gauge	read-only	The target frame rate in the partition. This is the low-order 32 bits.
GAU partitionFrameTargetRateHi	1.3.6.1.4.1.2334.2.1.3.2.1.52	Gauge	read-only	The target frame rate in the partition . This is the high-order 32 bits.
CTR partitionFrameCount	1.3.6.1.4.1.2334.2.1.3.2.1.53	Counter	read-only	The number of frames in the partition.
CTR partitionEcnCount	1.3.6.1.4.1.2334.2.1.3.2.1.54	Counter	read-only	The number of ECNs in the partition.
CTR partitionNonComprsnBytes	1.3.6.1.4.1.2334.2.1.3.2.1.55	Counter	read-only	The total number of non-compressed bytes in the partition.
CTR partitionNonComprsnBytesHi	1.3.6.1.4.1.2334.2.1.3.2.1.56	Counter	read-only	The total number of non-compressed bytes in the partition. This is the high-order 32 bits.
CTR partitionPreComprsnBytes	1.3.6.1.4.1.2334.2.1.3.2.1.57	Counter	read-only	The total number of bytes before compression in the partition.
CTR partitionPreComprsnBytesHi	1.3.6.1.4.1.2334.2.1.3.2.1.58	Counter	read-only	The total number of bytes before compression in the partition. This is the high-order 32 bits.
CTR partitionPostComprsnBytes	1.3.6.1.4.1.2334.2.1.3.2.1.59	Counter	read-only	The total number of bytes after compression in the partition.
CTR partitionPostComprsnBytesHi	1.3.6.1.4.1.2334.2.1.3.2.1.60	Counter	read-only	The total number of bytes after compression in the partition. This is the high-order 32 bits.
psClasses	1.3.6.1.4.1.2334.2.1.4
INT classTableSize	1.3.6.1.4.1.2334.2.1.4.1	INTEGER	read-only	Number of entries in the classTable
classTable	1.3.6.1.4.1.2334.2.1.4.2		not-accessible	A list of traffic class entries.
classEntry	1.3.6.1.4.1.2334.2.1.4.2.1		not-accessible	A traffic class entry containing statistical objects for a traffic class.
INT classIndex	1.3.6.1.4.1.2334.2.1.4.2.1.1	INTEGER	read-only	A unique ID for a traffic class.
STR className	1.3.6.1.4.1.2334.2.1.4.2.1.2	DisplayString	read-only	A unique name for a traffic class.
STR classOwningPartName	1.3.6.1.4.1.2334.2.1.4.2.1.3	DisplayString	read-only	A unique name for the partition which owns the class.
INT classLinkDirection	1.3.6.1.4.1.2334.2.1.4.2.1.4	INTEGER	read-only	The orientation of the class.
CTR classByteCount	1.3.6.1.4.1.2334.2.1.4.2.1.5	Counter	read-only	The byte count in the class.
CTR classByteCountHi	1.3.6.1.4.1.2334.2.1.4.2.1.6	Counter	read-only	The High 32 bits of byte count in the class.
CTR classPkts	1.3.6.1.4.1.2334.2.1.4.2.1.7	Counter	read-only	The packet count in the class.
CTR classDataPkts	1.3.6.1.4.1.2334.2.1.4.2.1.8	Counter	read-only	The TCP data packet count in the class.
CTR classReTxs	1.3.6.1.4.1.2334.2.1.4.2.1.9	Counter	read-only	The TCP retransmit packet count in the class.
CTR classReTxTosses	1.3.6.1.4.1.2334.2.1.4.2.1.10	Counter	read-only	The TCP tossed retransmit packet count in the class.
CTR classCirFails	1.3.6.1.4.1.2334.2.1.4.2.1.11	Counter	read-only	The count of CIR fails events in the class.
CTR classCirAllocs	1.3.6.1.4.1.2334.2.1.4.2.1.12	Counter	read-only	The count of CIR alloc events in the class.
CTR classEirAllocs	1.3.6.1.4.1.2334.2.1.4.2.1.13	Counter	read-only	The count of EIR alloc events in the class. This variable is obsolete and should not be used.
GAU classPeakTcpConns	1.3.6.1.4.1.2334.2.1.4.2.1.14	Gauge	read-only	The peak number of active TCP flows in the class.
CTR classTcpConnInits	1.3.6.1.4.1.2334.2.1.4.2.1.15	Counter	read-only	The count of TCP flows started in the class.
CTR classTcpConnExits	1.3.6.1.4.1.2334.2.1.4.2.1.16	Counter	read-only	The count of TCP flows exited in the class.
CTR classTcpConnRefuses	1.3.6.1.4.1.2334.2.1.4.2.1.17	Counter	read-only	The count of TCP flows exited by TCP refuse in the class.
CTR classTcpConnIgnores	1.3.6.1.4.1.2334.2.1.4.2.1.18	Counter	read-only	The count of TCP flows exited by being ignored in the class.
CTR classTcpConnAborts	1.3.6.1.4.1.2334.2.1.4.2.1.19	Counter	read-only	The count of TCP flows aborted in the class.
CTR classTcpConnDenies	1.3.6.1.4.1.2334.2.1.4.2.1.20	Counter	read-only	The count of TCP flows denied by CIR fail in the class.
CTR classTcpConnTimeouts	1.3.6.1.4.1.2334.2.1.4.2.1.21	Counter	read-only	The count of TCP flows timed out by pshaper in the class. This variable is obsolete and should not be used.
GAU classPeakUdpConns	1.3.6.1.4.1.2334.2.1.4.2.1.22	Gauge	read-only	The peak number of active UDP flows in the class. This variable is deprecated, and should no longer be used.
CTR classUdpConnInits	1.3.6.1.4.1.2334.2.1.4.2.1.23	Counter	read-only	The count of UDP flows started in the class. This variable is deprecated, and should no longer be used.
CTR classUdpConnExits	1.3.6.1.4.1.2334.2.1.4.2.1.24	Counter	read-only	The count of UDP flows exited in the class. This variable is deprecated, and should no longer be used.
CTR classHits	1.3.6.1.4.1.2334.2.1.4.2.1.25	Counter	read-only	Count of hits in the class
CTR classPolicyHits	1.3.6.1.4.1.2334.2.1.4.2.1.26	Counter	read-only	Count of policy hits in the class
GAU classRate	1.3.6.1.4.1.2334.2.1.4.2.1.27	Gauge	read-only	The peak total rate in bps of the class
GAU classRateAllocations	1.3.6.1.4.1.2334.2.1.4.2.1.28	Gauge	read-only	The count of rate allocations on the class. This variable is obsolete and should not be used.
GAU classPeakGuaranteedRateFlows	1.3.6.1.4.1.2334.2.1.4.2.1.29	Gauge	read-only	The peak number of guaranteed rate flows active on the class.
GAU classPeakRateFlows	1.3.6.1.4.1.2334.2.1.4.2.1.30	Gauge	read-only	The peak number of rate-based flows active on the class. This variable is obsolete and should not be used.
CTR classDataDelayEvents	1.3.6.1.4.1.2334.2.1.4.2.1.31	Counter	read-only	The total number of data delay events measured for the class. ** This variable is no longer used. Consult PacketeerRTM.mib for current response-time management variables.
INT classDataDelayTimeCum	1.3.6.1.4.1.2334.2.1.4.2.1.32	INTEGER	read-only	The cumulative data delay time in milliseconds measured for the class. classDataDelayTimeCum divided by classDataDelayEvents provides an indication of average response time for the class. (However, classDataDelayEvents MAY be zero, so you must check for that). ** This variable is no longer used. Consult PacketeerRTM.mib for current response-time management variables.
CTR classReservedOne	1.3.6.1.4.1.2334.2.1.4.2.1.33	Counter	read-only	This variable is for experimental use only.
CTR classReTxByteCount	1.3.6.1.4.1.2334.2.1.4.2.1.34	Counter	read-only	The count of retransmitted bytes on the class. This is the low-order 32 bits.
CTR classReTxByteCountHi	1.3.6.1.4.1.2334.2.1.4.2.1.35	Counter	read-only	The count of retransmitted bytes on the class. This is the high-order 32 bits.
STR classFullName	1.3.6.1.4.1.2334.2.1.4.2.1.36	DisplayString	read-only	The complete name of the class, e.g. /Inbound/Inside/HTTP. Note that the className variable gives only the last part, in this example HTTP.
GAU classCurrentRate	1.3.6.1.4.1.2334.2.1.4.2.1.37	Gauge	read-only	The current rate in bits per second.
CTR classPktExchangeTime	1.3.6.1.4.1.2334.2.1.4.2.1.38	Counter	read-only	(PacketShaper only). The packet exchange time for TCP data packets, between PacketShaper and the server side. This is the low-order 32 bits.
CTR classPktExchangeTimeHi	1.3.6.1.4.1.2334.2.1.4.2.1.39	Counter	read-only	(PacketShaper only). The packet exchange time for TCP data packets, between PacketShaper and the server side. This is the high-order 32 bits.
CTR classPktExchangeTimeSamples	1.3.6.1.4.1.2334.2.1.4.2.1.40	Counter	read-only	(PacketShaper only). The total number of packet exchanges counted for the classPktExchangeTime / classPktExchangeTimeHi number.
CTR classClientFloodBlock	1.3.6.1.4.1.2334.2.1.4.2.1.41	Counter	read-only	The total number of client side SYN flood attacks blocked.
CTR classServerFloodBlock	1.3.6.1.4.1.2334.2.1.4.2.1.42	Counter	read-only	The total number of server side SYN flood attacks blocked.
INT classAppAvailability	1.3.6.1.4.1.2334.2.1.4.2.1.43	INTEGER	read-only	The cumulative average application availability.
GAU classPeakIpdgConns	1.3.6.1.4.1.2334.2.1.4.2.1.47	Gauge	read-only	The peak number of active IPDG flows in the class.
CTR classWebResponse2XX	1.3.6.1.4.1.2334.2.1.4.2.1.48	Counter	read-only	The count of HTTP response messages having 2XX status codes (successful).
CTR classWebResponse3XX	1.3.6.1.4.1.2334.2.1.4.2.1.49	Counter	read-only	The count of HTTP response messages having 3XX status codes (redirection).
CTR classWebResponse4XX	1.3.6.1.4.1.2334.2.1.4.2.1.50	Counter	read-only	The count of HTTP response messages having 4XX status codes (client error).
CTR classWebResponse5XX	1.3.6.1.4.1.2334.2.1.4.2.1.51	Counter	read-only	The count of HTTP response messages having 5XX status codes (server error).
CTR classNonComprsnBytes	1.3.6.1.4.1.2334.2.1.4.2.1.52	Counter	read-only	The total number of non-compressed bytes in the class.
CTR classNonComprsnBytesHi	1.3.6.1.4.1.2334.2.1.4.2.1.53	Counter	read-only	The total number of non-compressed bytes in the class. This is the high-order 32 bits.
CTR classPreComprsnBytes	1.3.6.1.4.1.2334.2.1.4.2.1.54	Counter	read-only	The total number of bytes before compression in the class.
CTR classPostComprsnBytes	1.3.6.1.4.1.2334.2.1.4.2.1.55	Counter	read-only	The total number of bytes after compression in the class.
CTR classPostComprsnBytesHi	1.3.6.1.4.1.2334.2.1.4.2.1.56	Counter	read-only	The total number of bytes after compression in the class. This is the high-order 32 bits.
CTR classPreComprsnBytesHi	1.3.6.1.4.1.2334.2.1.4.2.1.58	Counter	read-only	The total number of bytes before compression in the class. This is the high-order 32 bits.
psAlarms	1.3.6.1.4.1.2334.2.1.5
CTR psAlarmInsideLinkCount	1.3.6.1.4.1.2334.2.1.5.1	Counter	read-only	The number of MIB-II LinkDown traps sent by the agent since the last reset, where ifIndex was for the Inside link.
CTR psAlarmOutsideLinkCount	1.3.6.1.4.1.2334.2.1.5.3	Counter	read-only	The number of MIB-II LinkDown traps sent by the agent since the last reset, where ifIndex was for the Outside link.
CTR psAlarmSiteRouterCount	1.3.6.1.4.1.2334.2.1.5.5	Counter	read-only	The number of psAlarmSiteRouter traps sent by the agent since the last reset.
INT psAlarmSiteRouterStatus	1.3.6.1.4.1.2334.2.1.5.6	INTEGER	read-only	Status of the site router. A status of gone(2) means that PacketShaper has stopped getting arp replies from the router. error-inside(3) means that it most recently got a reply, but from the inside. none(4) means that no site router was configured.
CTR psAlarmPowerSystemOneCount	1.3.6.1.4.1.2334.2.1.5.7	Counter	read-only	The number of psAlarmPowerSystemOne traps sent by the agent since the last reset.
INT psAlarmPowerSystemOneStatus	1.3.6.1.4.1.2334.2.1.5.8	INTEGER	read-only	The operational status of the first power system of the device. (1) UP (2) DOWN
CTR psAlarmPowerSystemTwoCount	1.3.6.1.4.1.2334.2.1.5.9	Counter	read-only	The number of psAlarmPowerSystemTwo traps sent by the agent since the last reset.
INT psAlarmPowerSystemTwoStatus	1.3.6.1.4.1.2334.2.1.5.10	INTEGER	read-only	The operational status of the second power supply of the device. (1) UP (2) DOWN
CTR psAlarmFanOneCount	1.3.6.1.4.1.2334.2.1.5.11	Counter	read-only	The number of psAlarmFanOne traps sent by the agent since the last reset.
INT psAlarmFanOneStatus	1.3.6.1.4.1.2334.2.1.5.12	INTEGER	read-only	The operational status of the first fan of the device. (0) Not existant (1) UP (2) DOWN
CTR psAlarmFanTwoCount	1.3.6.1.4.1.2334.2.1.5.13	Counter	read-only	The number of psAlarmFanTwo traps sent by the agent since the last reset.
INT psAlarmFanTwoStatus	1.3.6.1.4.1.2334.2.1.5.14	INTEGER	read-only	The operational status of the second fan of the device. (0) Not existant (1) UP (2) DOWN
CTR psAlarmCfgFileCount	1.3.6.1.4.1.2334.2.1.5.15	Counter	read-only	The number of psAlarmCfgFile traps sent by the agent since the last reset. This variable is obsolete and should not be used.
INT psAlarmCfgFileStatus	1.3.6.1.4.1.2334.2.1.5.16	INTEGER	read-only	Whether the configuration file has been corrupted. A value of valid(1) signifies no problems, corrupted(2) that the configuration file has been corrupted.
CTR psAlarmMeasurementEngineCount	1.3.6.1.4.1.2334.2.1.5.17	Counter	read-only	The number of psAlarmMeasurementEngine traps sent by the agent since the last reset.
INT psAlarmMeasurementEngineStatus	1.3.6.1.4.1.2334.2.1.5.18	INTEGER	read-only	The current status of the Measurement Engine. The values enumerated above correspond to those shown in the command line 'me show' command. (1) initially starting (2) starting (3) running (4) error on volume (5) disabled (6) wait to start (7) suspended (8) backing up data (9) restoring data
CTR psAlarmStandbyCount	1.3.6.1.4.1.2334.2.1.5.19	Counter	read-only	The number of psAlarmStandby traps sent by the agent since the last reset.
INT psAlarmStandbyStatus	1.3.6.1.4.1.2334.2.1.5.20	INTEGER	read-only	Status of the standby feature. A status of not-configured(1) means that standby is not configured for this PacketShaper. active(2) means hot standby is processing traffic according to its shaping mode. passive(3) means hot standby is not processing traffic but is monitoring the active partner of the paired PacketShapers. down(4) means hot standby has declared itself ineligible for active mode due to a self-detected fault. direct(5) means standby direct is processing and copying traffic to its partner. disconnected(6) means standby direct is non-functional since it cannot reach its partner. leak(7) means the Packetshaper has detected a loop in the network and so has disabled the stanby direct functionality and is only processing traffic flowing through it. disable(8) means that the standby direct feature has been disabled and is non-functional.
CTR psAlarmFanThreeCount	1.3.6.1.4.1.2334.2.1.5.21	Counter	read-only	The number of psAlarmFanThree traps sent by the agent since the last reset.
INT psAlarmFanThreeStatus	1.3.6.1.4.1.2334.2.1.5.22	INTEGER	read-only	The operational status of the 3rd fan of the device. (0) Not existant (1) UP (2) DOWN
CTR psAlarmFanFourCount	1.3.6.1.4.1.2334.2.1.5.23	Counter	read-only	The number of psAlarmFanFour traps sent by the agent since the last reset.
INT psAlarmFanFourStatus	1.3.6.1.4.1.2334.2.1.5.24	INTEGER	read-only	The operational status of the 4th fan of the device. (0) Not existant (1) UP (2) DOWN
psAdmin	1.3.6.1.4.1.2334.2.1.6
trapDestTable	1.3.6.1.4.1.2334.2.1.6.1		not-accessible	A list of destinations for traps emitted from this PacketShaper
trapDestEntry	1.3.6.1.4.1.2334.2.1.6.1.1		not-accessible	A trap destination entry containing the IP address (and possibly other information in the future)
IP trapDestIpAddr	1.3.6.1.4.1.2334.2.1.6.1.1.1	IpAddress	read-only	An address to which traps are sent
INT trapDestStatus	1.3.6.1.4.1.2334.2.1.6.1.1.2	INTEGER	read-write	Status of this trap destination. Setting to invalid(2) is equivalent to removing the address from the table. See also trapDestRemove for a shortcut for removal.
STR trapDestAdd	1.3.6.1.4.1.2334.2.1.6.2	DisplayString	write-only	A shortcut for adding a host to trapDestTable. If the name is not in n.n.n.n IP address form, then the agent attempts to look it up via DNS. If the operation fails with BADVALUE, try again with an IP address. The associated IP address is added to the trapDestTable if the operation succeeded. The table should be queried afterward to insure that the action took place.
STR trapDestRemove	1.3.6.1.4.1.2334.2.1.6.3	DisplayString	write-only	A shortcut for removing an IP address from trapDestTable. If the name is not in n.n.n.n IP address form, then the agent attempts to look it up via DNS. If the operation fails with BADVALUE, try again with an IP address. The table should be queried afterward to insure that the action took place.
INT psShapingStatusAdmin	1.3.6.1.4.1.2334.2.1.6.4	INTEGER	read-write	This object reflects the current configured traffic shaping status of the PacketShaper. The value of other(4) may occur in certain cases which can only be caused through the PacketShaper's user interface, and cannot be set through this variable
psUserEvents	1.3.6.1.4.1.2334.2.1.8
psUserEventTrapVars	1.3.6.1.4.1.2334.2.1.8.1
STR userEventTrapName	1.3.6.1.4.1.2334.2.1.8.1.1	DisplayString	not-accessible	The name of the user event which has occurred.
STR userEventTrapExpression	1.3.6.1.4.1.2334.2.1.8.1.2	DisplayString	not-accessible	The expression defining this user event.
STR userEventTrapVariable	1.3.6.1.4.1.2334.2.1.8.1.3	DisplayString	not-accessible	The name of the Measurement Engine variable which is tested in this user event.
INT userEventTrapElementType	1.3.6.1.4.1.2334.2.1.8.1.4	INTEGER	not-accessible	The type of element which is tested in this user event.
INT userEventTrapRegid	1.3.6.1.4.1.2334.2.1.8.1.5	INTEGER	not-accessible	The registration of this user event.
DAT userEventTrapDate	1.3.6.1.4.1.2334.2.1.8.1.6	DateAndTime	not-accessible	The time the event occurred.
INT userEventTrapValue	1.3.6.1.4.1.2334.2.1.8.1.7	INTEGER	not-accessible	The value of userEventTrapVariable which triggered the event.
STR userEventTrapTarget	1.3.6.1.4.1.2334.2.1.8.1.8	DisplayString	not-accessible	The name of the link, class, or partition, as given in userEventTrapElementType, which is the target of this event regiatration.
INT userEventTrapThreshold	1.3.6.1.4.1.2334.2.1.8.1.9	INTEGER	not-accessible	The threshold value which triggers this event. See the value of userEventTrapExpression for the signedness with respect to the threshold (, etc.)
INT userEventTrapRearm	1.3.6.1.4.1.2334.2.1.8.1.10	INTEGER	not-accessible	The rearm value which must be hit after an occurrence of this event in order to rearm it. See the value of userEventTrapExpression for the signedness with respect to the threshold (, etc.)
INT userEventTrapDayCount	1.3.6.1.4.1.2334.2.1.8.1.11	INTEGER	not-accessible	The number of times this event has occurred on this day (as counted from midnight to midnight, local time). If this value is greater than or equal to userEventTrapDayLimit, and that value is non-zero, then no more instances of this event will be reported until the next day.
INT userEventTrapDayLimit	1.3.6.1.4.1.2334.2.1.8.1.12	INTEGER	not-accessible	The maximum number of times this event is allowed to occur per day (as counted from midnight to midnight, local time), as configured by the user. A value of zero denotes no limit.
psHighAv	1.3.6.1.4.1.2334.2.1.9
CTR psFeatureHighAvDeviceDownCount	1.3.6.1.4.1.2334.2.1.9.1	Counter	read-only	The number of psFeatureHighAvDevice traps sent by the agent since the last reset.
INT psFeatureHighAvDeviceDownStatus	1.3.6.1.4.1.2334.2.1.9.2	INTEGER	read-only	The operational status of the interface of the router we are polling. (1) UP (2) DOWN.
STR psFeatureHighAvDeviceDownRouter	1.3.6.1.4.1.2334.2.1.9.3	DisplayString	read-only	The name of a router that has gone down or the name of the router whose one of the interfaces has gone down.
STR psFeatureHighAvDeviceDownInterface	1.3.6.1.4.1.2334.2.1.9.4	DisplayString	read-only	The name of the interface that has gone down. The name will be specified as 'unknown' in the cases where we could not resolve the interface name. The interface name will have a value of NULL or zero-length value if the router goes down.
psAgentEvent	1.3.6.1.4.1.2334.2.1.10
psAgentEventTrapVars	1.3.6.1.4.1.2334.2.1.10.1
STR agentEventTrapName	1.3.6.1.4.1.2334.2.1.10.1.1	DisplayString	not-accessible	The name of the agent instance which has fired the event.
DAT agentEventTrapDate	1.3.6.1.4.1.2334.2.1.10.1.2	DateAndTime	not-accessible	The time the event occurred.
INT agentEventTrapType	1.3.6.1.4.1.2334.2.1.10.1.3	INTEGER	not-accessible	The type of event that occurred, 0 = GREEN, 1 = RED, 2 = YELLOW, 3 = BLUE.
STR agentEventTrapDescription	1.3.6.1.4.1.2334.2.1.10.1.4	DisplayString	not-accessible	A description of the event that has occurred.

RFC description

PacketShaper traffic shaping appliance MIB for managing bandwidth allocation and link traffic.

Start monitoring Packeteer/Blue Coat WAN optimization appliances with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PACKETEER-MIB

What Is PACKETEER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description