PEPLINK-BALANCE-MIB

All MIBs › PEPLINK-BALANCE-MIB

Organization: Peplink

Last Updated: 2009-03-05

Category: Products/Registration, WAN

Description: Manages Peplink Balance multi-WAN routers, providing WAN link status, load-balancing policy, and per-link traffic statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PEPLINK-BALANCE-MIB?

PEPLINK-BALANCE-MIB is a vendor-specific SNMP module for Peplink Balance multi-WAN routers, which load-balance and fail over traffic across multiple internet/WAN connections. It exposes system identification and status (firmware version, serial number, uptime, time), LAN configuration (IP address, subnet mask, link status), and a per-WAN-link table with connection counts and link naming. Its monitoring value spans both software and hardware/link status: balFirmware reveals the running firmware version for update tracking, balUpTime indicates device availability/reboot history, balLanStatus reports LAN interface health, and linkTable/linkEntry with linkConnNum and linkName let an admin see per-WAN-link connection load and identify a failed or saturated link. As a compact SOHO/SMB router MIB it stands largely on its own, though it can be paired with standard IF-MIB for physical interface counters. It is typically deployed in small-to-medium branch or retail sites using Peplink Balance appliances for WAN bonding/failover. Engineers can download the PEPLINK-BALANCE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PEPLINK-BALANCE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Peplink Balance multi-WAN router

Monitoring Examples

An admin monitoring WAN health would iterate linkTable/linkEntry to read linkName and linkConnNum for each of the balLinkNumber WAN links, watching for a link whose connection count drops to zero (indicating failover or outage) while balanceStatus and balLanStatus confirm overall device and LAN health. balUpTime dropping unexpectedly signals an unplanned reboot, and balFirmware is checked during audits to confirm all branch routers run a consistent, patched firmware version. balSerialNumber and balLanIp/balLanSubnetMask round out asset identification for inventory purposes.

What Can Be Monitored

firmware version
system uptime
LAN interface status/IP
per-WAN-link connection count
WAN link name/identity
overall balance/system status

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
peplinkBalance	1.3.6.1.4.1.23695.1			MIB module for Peplink Balance.
balanceStatus	1.3.6.1.4.1.23695.1.1
balanceSystem	1.3.6.1.4.1.23695.1.1.1
STR balFirmware	1.3.6.1.4.1.23695.1.1.1.1	NameString	read-only	Balance firmware version.
STR balSerialNumber	1.3.6.1.4.1.23695.1.1.1.2	NameString	read-only	Balance serial number.
STR balTime	1.3.6.1.4.1.23695.1.1.1.3	NameString	read-only	Balance system time.
TIK balUpTime	1.3.6.1.4.1.23695.1.1.1.4	TimeTicks	read-only	Balance up time (in hundredths of a second) since the system was last re-initialized.
balanceLan	1.3.6.1.4.1.23695.1.1.1.6
STR balLanStatus	1.3.6.1.4.1.23695.1.1.1.6.1	NameString	read-only	Balance LAN status (up/down).
IP balLanIp	1.3.6.1.4.1.23695.1.1.1.6.2	IpAddress	read-only	Balance LAN IP address.
IP balLanSubnetMask	1.3.6.1.4.1.23695.1.1.1.6.3	IpAddress	read-only	Balance LAN sub-net mask.
balLinkStatus	1.3.6.1.4.1.23695.1.1.2
C32 balLinkNumber	1.3.6.1.4.1.23695.1.1.2.1	Counter32	read-only	The number of network interfaces (regardless of their current state) present on this system.
linkTable	1.3.6.1.4.1.23695.1.1.2.2		not-accessible	A list of link status.
linkEntry	1.3.6.1.4.1.23695.1.1.2.2.1		not-accessible	An entry containing management information applicable to a particular interface.
CON linkConnNum	1.3.6.1.4.1.23695.1.1.2.2.1.1	ConnectionNum	not-accessible	Virtual WAN index number (1-based, unique).
STR linkName	1.3.6.1.4.1.23695.1.1.2.2.1.2	NameString	read-only	Balance link status (connecting/connected/link down).
STR linkStatus	1.3.6.1.4.1.23695.1.1.2.2.1.3	NameString	read-only	Balance link status (connecting/connected/link down).
C32 linkThroughputIn	1.3.6.1.4.1.23695.1.1.2.2.1.4	Counter32	read-only	The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of balanceWanCounterDiscontinuityTime.
C32 linkThroughputOut	1.3.6.1.4.1.23695.1.1.2.2.1.5	Counter32	read-only	The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of balanceWanCounterDiscontinuityTime.
C64 linkDataTransferred	1.3.6.1.4.1.23695.1.1.2.2.1.6	Counter64	read-only	The numbe of bytes transferred through.
linkIpTable	1.3.6.1.4.1.23695.1.1.2.3		not-accessible	A list of link status.
linkIpEntry	1.3.6.1.4.1.23695.1.1.2.3.1		not-accessible	An entry containing management information applicable to a particular interface.
CON linkIpConnNum	1.3.6.1.4.1.23695.1.1.2.3.1.1	ConnectionNum	not-accessible	Virtual WAN index number.
TAB linkIpIndex	1.3.6.1.4.1.23695.1.1.2.3.1.2	TableIndex	not-accessible	Virtual WAN index number.
IP linkIp	1.3.6.1.4.1.23695.1.1.2.3.1.3	IpAddress	read-only	Balance link IP address list.
wanUsageTable	1.3.6.1.4.1.23695.1.1.3		not-accessible	A list of interface entries.
wanUsageEntry	1.3.6.1.4.1.23695.1.1.3.1		not-accessible	An entry containing management information applicable to a particular interface.
TAB wanUsageIndex	1.3.6.1.4.1.23695.1.1.3.1.1	TableIndex	not-accessible	Physical WAN index number.
C32 wanUsageThroughputIn	1.3.6.1.4.1.23695.1.1.3.1.2	Counter32	read-only	The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of balanceWanCounterDiscontinuityTime.
C32 wanUsageThroughputOut	1.3.6.1.4.1.23695.1.1.3.1.3	Counter32	read-only	The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of balanceWanCounterDiscontinuityTime.
C64 wanUsageDataTransferred	1.3.6.1.4.1.23695.1.1.3.1.4	Counter64	read-only	The numbe of bytes transferred through.
balanceMaintenance	1.3.6.1.4.1.23695.1.2
STR balReboot	1.3.6.1.4.1.23695.1.2.1	NameString	read-write	Reboot the Balance. Write 'enable' to take effect.
balanceLanConfig	1.3.6.1.4.1.23695.1.3
POR portLanSpeedConfig	1.3.6.1.4.1.23695.1.3.1	PortSpeedType	read-write	Set Balance LAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.
portWanSpeedConfigTable	1.3.6.1.4.1.23695.1.3.2		not-accessible	A list of interface entries.
portWanSpeedConfigEntry	1.3.6.1.4.1.23695.1.3.2.1		not-accessible	An entry containing management information applicable to a particular interface.
TAB portWanSpeedConfigIndex	1.3.6.1.4.1.23695.1.3.2.1.1	TableIndex	not-accessible	Physical LAN/WAN port name.
POR portWanSpeedConfig	1.3.6.1.4.1.23695.1.3.2.1.2	PortSpeedType	read-write	Set Balance WAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.
IP lanConfigIp	1.3.6.1.4.1.23695.1.3.3	IpAddress	read-write	Set Balance LAN IP address.
IP lanConfigSubnetMask	1.3.6.1.4.1.23695.1.3.4	IpAddress	read-write	Set Balance LAN sub-net mask.
balanceConformance	1.3.6.1.4.1.23695.1.50
balCompliances	1.3.6.1.4.1.23695.1.50.1
balCompliance	1.3.6.1.4.1.23695.1.50.1.1			Balance compliance groups.
balGroups	1.3.6.1.4.1.23695.1.50.2
balSystemGroup	1.3.6.1.4.1.23695.1.50.2.1			Balance system status group.
balLinkGroup	1.3.6.1.4.1.23695.1.50.2.2			Balance system status group.
balWanGroup	1.3.6.1.4.1.23695.1.50.2.3			Balance system status group.
balSetGroup	1.3.6.1.4.1.23695.1.50.2.4			Balance system status group.

RFC description

Peplink Balance WAN load balancer MIB monitoring status, connections, and interface configuration.

Start monitoring Peplink Balance multi-WAN router with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PEPLINK-BALANCE-MIB

What Is PEPLINK-BALANCE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description