| OID symbolic | OID numeric | Type | Access | Description |
|---|
| oacEthOamExtMib | 1.3.6.1.4.1.13191.1.100.689 | | | fixed compilation issues |
| oacEthOamExtMIBObjects | 1.3.6.1.4.1.13191.10.3.10.2 | | | |
| oacEthOamExtIfObjects | 1.3.6.1.4.1.13191.10.3.10.2.1 | | | |
| oacEthOamExtMipTable | 1.3.6.1.4.1.13191.10.3.10.2.1.1 | | not-accessible | This table contains a list of Maintenance domain
Intermediate Points.
This table manages MIPs which are created by rules
specified on the Maintenance Association (MA) and
Maintenance Domain (MD) on the local device. MIPs can
also be created by rules specified on Default MD Level,
which is covered by dot1agCfmDefaultMdTable in
IEEE8021-CFM-MIB. |
| oacEthOamExtMipEntry | 1.3.6.1.4.1.13191.10.3.10.2.1.1.1 | | not-accessible | An entry containing configuration of a particular MIP.
Each row in the table represents a different MIP. |
| NUM oacEthOamMipIfIndex | 1.3.6.1.4.1.13191.10.3.10.2.1.1.1.1 | InterfaceIndex | not-accessible | This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MIP is attached.
Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable so that it indexes the
entry in the interface table with the same value of ifAlias
that it indexed before the system restart. If no such
entry exists, then the system SHALL set this variable to 0. |
| U32 oacEthOamMipMegLevel | 1.3.6.1.4.1.13191.10.3.10.2.1.1.1.2 | Unsigned32 | not-accessible | The MEG level of the MIP. |
| VLA oacEthOamMipVlanIndex | 1.3.6.1.4.1.13191.10.3.10.2.1.1.1.3 | VlanIdOrNone | not-accessible | The VID associated with the MIP. |
| ETH oacEthOamMipMode | 1.3.6.1.4.1.13191.10.3.10.2.1.1.1.4 | EthOamExtMipMode | read-create | The MIP mode. The possible values are:
- modey1731 (1) The MIP functions according to the Y.1731 standard
- mode802dot1ag (2) The MIP functions according to the IEEE 802.1ag
standard
The default value is 'modey1731'. |
| ROW oacEthOamMipRowStatus | 1.3.6.1.4.1.13191.10.3.10.2.1.1.1.5 | RowStatus | read-create | The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated. |
| oacEthOamExtMepTable | 1.3.6.1.4.1.13191.10.3.10.2.1.2 | | not-accessible | The Extended MEP table stores all the managed objects for
setting the CFM standard of the MEP (Y1731, dot1ag, or hybrid), for
sending LMM/DMM, for enabling transmission of RDI and AIS, for
enabling EFD functionality, and for controlling Multicast Loopbacks.
It is an extension of the standard MEP table.
(AUGMENT - it uses the same indexes as the standard MEP table
dot1agCfmMepTable)
*LMM Managed objects
LMM Managed objects in the extended MEP table enable the management
entity to initiate transmission of Frame Loss messages. It will signal
the MEP that it should start to transmit Frame Loss messages (LMM)
and retrieve the information received from the Frame Loss
Responses (LMR).
Steps to use entries in this table:
1) Wait for oacEthOamMepLossStatus value to be
false. To do this do this sequence:
a. an SNMP GET for both SnmpSetSerialNo and
oacEthOamMepLossStatus objects (in same SNMP
PDU).
b. Check if value for oacEthOamMepLossStatus is false.
- if not, wait x seconds, go to step a above.
- if yes, save the value of SnmpSetSerialNo and go
to step 2) below
2) Change oacEthOamMepLossStatus value from false to
true to ensure no other management entity will use
the service. In order to not disturb a possible other NMS
do this by sending an SNMP SET for both SnmpSetSerialNo
and oacEthOamMepLossStatus objects (in same SNMP
PDU, and make sure SNmpSetSerialNo is the first varBind).
For the SnmpSetSerialNo varBind, use the value that you
obtained in step 1)a. This ensures that two cooperating
NMSes will not step on each others toes.
3) Setup the different data to be sent (destination, priority,
interval,...), except do not set oacEthOamMepLossMessagesStart.
4) Set oacEthOamMepLossMessagesStart to true to initiate
transmission of Frame Loss messages.
5) Check the value of oacEthOamMepLossResultOK to
find out if the operation was successfully initiated or
not.
6) The results of the running test can be retrieved from
oacEthOamMepLossNbrOfTxFrames, oacEthOamMepLossNbrOfRxFrames,
oacEthOamMepLossReplyLoss, oacEthOamMepLossNearEndDrops and
oacEthOamMepLossFarEndDrops.
7) If you so desire, you can periodically stop and/or restart
transmission of LMM messages by modifying the
oacEthOamMepLossMessagesStart accordingly.
8) Change the oacEthOamMepLossStatus value back to
false to allow other management entities to use the
table. Setting oacEthOamMepLossStatus to false obviously implies
that LMMs will no longer be transmitted, and that as such the value
of oacEthOamMepLossMessagesStart will be ignored.
*DMM Managed objects
The DMM Managed objects in the extended MEP table are used in a manner
similar to that described for LMM transmission, above. Upon
successfully initiating the transmission, the objects
oacEthOamMepDelayNbrOfTxFrames, oacEthOamMepDelayNbrOfRxFrames,
oacEthOamMepDelayLoss, oacEthOamMepDelayMin, oacEthOamMepDelayMax,
oacEthOamMepDelayAvrg, oacEthOamMepDelayJitterNegMax,
oacEthOamMepDelayJitterAvrgMax, oacEthOamMepDelayJitterPosMax
contain the result of the test.
*AIS managed objects
The AIS managed objects in the extended MEP table are used in a manner
similar to that described for LMM transmission. In short, first all
managed objects except oacEthOamMepAisTxEnable must be set, then
oacEthOamMepAisTxEnable must be set to true to enable transmission of
AIS. Set it to false to disable transmission again.
*Multicast Loopbacks
The Multicast Loopback managed objects are used as follows. If wanted,
the SNMP manager first sets the oacEthOamMepMcastLbmDataTlv payload,
or makes sure that the string is empty if no DataTLV is wanted.
Next, the SNMP manager must wait for the oacEthOamMepMcastLbmStatus
flag to be false.
Then, the oacEthOamMepMcastLbmStatus flag must be set to true to
initiate transmission of the Multicast LBM. Then the SNMP manager must
wait until the MEP Multicast Loopback Initiator State Machine has set
this flag back to false, which indicates that the time to wait for
loopback replies has expired. Finally, the oacEthOamLbrNotRespTable and
oacEthOamExtLbrTable tables can be consulted to evaluate the results.
*EFD Managed Objects
CFM could be considered as a line protocol for controlling Ethernet
interfaces. In case of Loss of Continuity or AIS or RDI reception,
the interface can be disabled. This feature is called Ethernet Fault
Detection and Propagation, or EFD. It is only available for inward
facing MEPs. When the interface, to which the inward facing MEP
belongs, is disabled, the MEP stays up and CFM frames are still
flowing. When the defect disappears, EFD will bring the MEP's interface
up again.
EFD can be enabled with the oacEthOamMepEfdEnable managed object. If
more than one inward facing MEP is configured for a specific interface,
then EFD can only be enabled on one of these MEPs.
Once enabled, the EFD state of the interface can be retrieved from the
oacEthOamMepEfdState managed object. In case EFD is triggered, object
dot1agCfmMepDefects from the IEEE8021-CFM-MIB MIB can be used to
further investigate the cause(s) of the EFD trigger. |
| oacEthOamExtMepEntry | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1 | | not-accessible | The MEP table entry |
| ETH oacEthOamMepMode | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.1 | EthOamExtMepMode | read-write | The standard the MEP is following. The possible values are:
- modey1731 (1) The MEP functions according to the Y.1731
standard
- mode802dot1ag (2) The MEP functions according to the IEEE 802.1ag
standard
- modehybrid (3) MEP functions according to the IEEE 802.1ag
standard, but also supports the delay and loss
functionality of the Y.1731 standard
The default mode is 'modehybrid'. |
| MAC oacEthOamMepLossDestMacAddress | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.10 | MacAddress | read-write | The Target MAC Address Field to be transmitted: A unicast destination
MAC address. This address will be used if the value of the column
oacCfmMepLossDestIsMepId is 'false'. |
| DOT oacEthOamMepLossDestMepId | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.11 | Dot1agCfmMepIdOrZero | read-write | The Maintenance association End Point Identifier of another MEP in the
same Maintenance Association to which the LMM is to be sent. This
address will be used if the value of the column oacCfmMepLossDestIsMepId
is 'true'. |
| T/F oacEthOamMepLossDestIsMepId | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.12 | TruthValue | read-write | True indicates that MEPID of the target MEP is used for FrameLoss
transmission.
False indicates that unicast destination MAC address of the target MEP
is used for FrameLoss transmission. |
| U32 oacEthOamMepLossVlanPriority | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.13 | Unsigned32 | read-write | Priority. 3 bit value to be used in the VLAN tag, if present in the
transmitted frame. |
| NUM oacEthOamMepLossInterval | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.14 | Dot1agCfmCcmInterval | read-write | Interval between LMM transmissions. |
| T/F oacEthOamMepLossStatus | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.15 | TruthValue | read-write | A Boolean flag set to true by the MEP Loopback Initiator State
Machine or an MIB manager to indicate that LMM messages are going to be
transmitted or are already being transmitted.
Reset to false by the MEP Loopback Initiator State Machine or the same
MIB manager. |
| T/F oacEthOamMepLossMessagesStart | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.16 | TruthValue | read-write | A Boolean flag set to true by an MIB manager to start LMM
transmission, or set to false by an MIB manager to stop LMM
transmission. |
| T/F oacEthOamMepLossResultOK | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.17 | TruthValue | read-only | Indicates the result of the operation:
- true The FrameDelay Message(s) will be sent.
- false The FrameDelay Message(s) will not be sent. |
| C32 oacEthOamMepLossNbrOfTxFramesEx | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.18 | Counter32 | read-only | The number of sent LMM frames. |
| C32 oacEthOamMepLossNbrOfRxFrames | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.19 | Counter32 | read-only | The number of received LMR frames. |
| C32 oacEthOamMepLossReplyLoss | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.20 | Counter32 | read-only | Difference between the number of sent LMMs and the number of received
LMRs. |
| C32 oacEthOamMepLossNearEndDrops | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.21 | Counter32 | read-only | Number of in-profile data frames dropped on the interface on which the
local MEP is defined, sent by the remote MEP, excluding OAM frames at
the MEP's MEG level. |
| C32 oacEthOamMepLossFarEndDrops | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.22 | Counter32 | read-only | Number of in-profile data frames dropped on the interface on which the
remote MEP is defined, sent by the local MEP, excluding OAM frames at
the MEP's MEG level. |
| MAC oacEthOamMepDelayDestMacAddress | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.30 | MacAddress | read-write | The Target MAC Address Field to be transmitted: A unicast destination
MAC address. This address will be used if the value of the column
oacCfmMepDelayDestIsMepId is 'false'. |
| DOT oacEthOamMepDelayDestMepId | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.31 | Dot1agCfmMepIdOrZero | read-write | The Maintenance association End Point Identifier of another MEP in the
same Maintenance Association to which the DMM is to be sent. This
address will be used if the value of the column
oacCfmMepLossDestIsMepId is 'true'. |
| T/F oacEthOamMepDelayDestIsMepId | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.32 | TruthValue | read-write | True indicates that MEPID of the target MEP is used for FrameDelay
transmission.
False indicates that unicast destination MAC address of the target MEP
is used for FrameDelay transmission. |
| U32 oacEthOamMepDelayVlanPriority | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.33 | Unsigned32 | read-write | Priority. 3 bit value to be used in the VLAN tag, if present in the
transmitted frame. |
| NUM oacEthOamMepDelayInterval | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.34 | Dot1agCfmCcmInterval | read-write | Interval between DMM transmissions. |
| T/F oacEthOamMepDelayStatus | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.35 | TruthValue | read-write | A Boolean flag set to true by the MEP Loopback Initiator State
Machine or an MIB manager to indicate that DMM messages are going to be
transmitted or are already being transmitted.
Reset to false by the MEP Loopback Initiator State Machine or the same
MIB manager. |
| U32 oacEthOamMepDelayTimeOut | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.36 | Unsigned32 | read-write | Time to wait for a FrameDelay response, before considering it lost,
expressed in multiples of 100msec. |
| T/F oacEthOamMepDelayMessagesStart | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.37 | TruthValue | read-write | A Boolean flag set to true by an MIB manager to start DMM
transmission, or set to false by an MIB manager to stop DMM
transmission. |
| T/F oacEthOamMepDelayResultOK | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.38 | TruthValue | read-only | Indicates the result of the operation:
- true The FrameLoss Message(s) will be sent.
- false The FrameLoss Message(s) will not be sent. |
| C32 oacEthOamMepDelayNbrOfTxFrames | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.39 | Counter32 | read-only | The number of sent DMM frames. |
| C32 oacEthOamMepDelayNbrOfRxFrames | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.40 | Counter32 | read-only | The number of received DMR frames. |
| C32 oacEthOamMepDelayLoss | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.41 | Counter32 | read-only | Difference between the number of sent DMMs and the number of received
DMRs within the delay window (size = 10). |
| U32 oacEthOamMepDelayMin | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.42 | Unsigned32 | read-only | The minimum delay that was measured in the Delay test, expressed in
milliseconds. |
| U32 oacEthOamMepDelayMax | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.43 | Unsigned32 | read-only | The maximum delay that was measured in the Delay test, expressed in
milliseconds. |
| U32 oacEthOamMepDelayAvrg | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.44 | Unsigned32 | read-only | The average delay that was measured in the Delay test, expressed in
milliseconds. |
| U32 oacEthOamMepDelayJitterNegMax | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.45 | Unsigned32 | read-only | The maximum negative jitter deviation that was measured in the Delay
test, expressed in milliseconds. |
| U32 oacEthOamMepDelayJitterAvrgMax | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.46 | Unsigned32 | read-only | The maximum average jitter that was measured in the Delay test,
expressed in milliseconds. |
| U32 oacEthOamMepDelayJitterPosMax | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.47 | Unsigned32 | read-only | The maximum positive jitter deviation that was measured in the Delay
test, expressed in milliseconds. |
| T/F oacEthOamMepRdiTxEnable | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.60 | TruthValue | read-write | Enable the transmission of RDI frames. Since RDI is a bit in the CCM
frames, this setting is only taken into account if the transmission
of CC messages is enabled. |
| T/F oacEthOamMepMcastLbmStatus | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.70 | TruthValue | read-write | A Boolean flag set to true by the MEP Multicast Loopback Initiator State
Machine or an MIB manager to start transmission of a single multicast
Loopback message.
Reset to false by the MEP Multicast Loopback Initiator State Machine
once the timeframe to wait for replies has expired. |
| T/F oacEthOamMepMcastLbmResult | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.71 | TruthValue | read-only | Indicates the result of the operation:
- true The multicast Loopback Message(s) will be (or has been)
sent
- false The multicast Loopback Message(s) will not be sent. |
| U32 oacEthOamMepMcastLbmSeqNumber | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.72 | Unsigned32 | read-only | The multicast Loopback Transaction Identifier of the next multicast
LBM (to be) sent.
This sequence number can be zero because it wraps around.
The value returned is undefined if oacEthOamMepMcastLbmResult is false. |
| OCT oacEthOamMepMcastLbmDataTlv | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.73 | OCTET STRING | read-write | An arbitrary amount of data to be included in the Data TLV of the
Multicast Loopback message. When set to a zero length string, the
dataTlv part of the message is omitted. |
| U32 oacEthOamMepAisInterval | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.80 | Unsigned32 | read-write | Interval between AIS transmissions. |
| U32 oacEthOamMepAisVlanPriority | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.81 | Unsigned32 | read-write | Priority. 3 bit value to be used in the VLAN tag, if present in the
transmitted AIS frame. |
| T/F oacEthOamMepAisTxEnable | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.82 | TruthValue | read-write | Enable the transmission of AIS frames. |
| U32 oacEthOamMepAisClientMegLevel | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.83 | Unsigned32 | read-write | Maintenance level on which the AIS frames will be sent. |
| T/F oacEthOamMepEfdEnable | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.90 | TruthValue | read-write | Enables Ethernet Fault Detection & propagation. |
| ETH oacEthOamMepEfdState | 1.3.6.1.4.1.13191.10.3.10.2.1.2.1.91 | EthOamEfdState | read-only | The EFD state of the interface that this MEP belongs to. |
| oacEthOamExtGlobal | 1.3.6.1.4.1.13191.10.3.10.2.1.3 | | | |
| T/F oacEthOamExtEnable | 1.3.6.1.4.1.13191.10.3.10.2.1.3.1 | TruthValue | read-write | This object enables or disables the CFM feature
of the local device. When the object is 'true',
CFM feature is enabled. When the object is 'false',
CFM feature is disabled. |
| oacEthOamExtLbrTable | 1.3.6.1.4.1.13191.10.3.10.2.1.4 | | not-accessible | The multicast Loopback reply table, a list of all received replies. |
| oacEthOamExtLbrEntry | 1.3.6.1.4.1.13191.10.3.10.2.1.4.1 | | not-accessible | An entry containing configuration of a particular LBR.
Each row in the table represents a different LBR |
| U32 oacEthOamLbrReceiveOrder | 1.3.6.1.4.1.13191.10.3.10.2.1.4.1.1 | Unsigned32 | not-accessible | An index to distinguish among multiple LBRs with the same LBR
Transaction Identifier field value. oacEthOamLbrReceiveOrder
are assigned sequentially from 1, in the order that the
Loopback Initiator received the LBRs. |
| MAC oacEthOamLbrPeerMacAddress | 1.3.6.1.4.1.13191.10.3.10.2.1.4.1.2 | MacAddress | read-only | The unicast MAC address of the MEP that replied. |
| DOT oacEthOamLbrMepId | 1.3.6.1.4.1.13191.10.3.10.2.1.4.1.3 | Dot1agCfmMepIdOrZero | read-only | If the MEP ID can be resolved, the MEPID, else 0. |
| oacEthOamLbrNotRespTable | 1.3.6.1.4.1.13191.10.3.10.2.1.5 | | not-accessible | Table containing a list of all known peer MEPs which have not
responded to the multicast Loopback Message. |
| oacEthOamLbrNotRespEntry | 1.3.6.1.4.1.13191.10.3.10.2.1.5.1 | | not-accessible | An entry containing configuration of a particular MEP.
Each row in the table represents a different MEP` |
| DOT oacEthOamLbrNotRespMepId | 1.3.6.1.4.1.13191.10.3.10.2.1.5.1.1 | Dot1agCfmMepIdOrZero | read-only | The MEP ID of the known peer MEP that did not reply. |
| MAC oacEthOamLbrNotRespPeerMacAddress | 1.3.6.1.4.1.13191.10.3.10.2.1.5.1.2 | MacAddress | read-only | The unicast MAC address of the known peer MEP that has not replied. |
