ONEACCESS-SNMP-CONFIG-MIB

All MIBs › ONEACCESS-SNMP-CONFIG-MIB

Organization: OneAccess

Last Updated: 2011-07-29

Category: CPE/Router

Description: Manages SNMP agent configuration including community strings and trap destinations on OneAccess CPE routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ONEACCESS-SNMP-CONFIG-MIB?

ONEACCESS-SNMP-CONFIG-MIB is a OneAccess (WAN router vendor, later Ekinops) proprietary MIB configuring the SNMP agent itself. Its objects cover SNMP/trap source interface, a short interface-description flag, chassis ID, max message size, a community-configuration table (string, access type, ACL type/name, SNMPv2 group name, encrypted flag, row status), engine ID, remote-agent IP, a remote-engine-ID table (engine ID, IP address, max message size, row status), and a trap-configuration table (type). As a configuration MIB it lets an administrator confirm SNMP community/ACL restrictions and trap configuration on a OneAccess router. It is deployed on OneAccess (Ekinops) WAN routers. Engineers can download the ONEACCESS-SNMP-CONFIG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ONEACCESS-SNMP-CONFIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

OneAccess (Ekinops) WAN routers

Monitoring Examples

An administrator checks oacSnmpCommunityAclName to confirm SNMP access-control restrictions on a OneAccess router.

What Can Be Monitored

SNMP community/ACL and trap configuration

Imported Objects

From ONEACCESS-GLOBAL-REG

oacExpIMIpAcl	OBJECT-IDENTITY
oacExpIMManagement	OBJECT-IDENTITY
oacMIBModules	OBJECT-IDENTITY

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
PhysAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
oacSnmpConfigMIB	1.3.6.1.4.1.13191.1.100.2002			fixed compilation issues
oacSnmpConfig	1.3.6.1.4.1.13191.10.3.4.20
oacSnmpConfigObjects	1.3.6.1.4.1.13191.10.3.4.20.1
OCT oacSnmpSource	1.3.6.1.4.1.13191.10.3.4.20.1.1	OCTET STRING	read-write	snmp source { \| any }
OCT oacSnmpTrapSource	1.3.6.1.4.1.13191.10.3.4.20.1.2	OCTET STRING	read-write	snmp trap-source { \| any }
T/F oacSnmpMibIfDescrShort	1.3.6.1.4.1.13191.10.3.4.20.1.3	TruthValue	read-write	will display the interface name with out spaces between the interface and unit
OCT oacSnmpChassisId	1.3.6.1.4.1.13191.10.3.4.20.1.4	OCTET STRING	read-write	Chassis Id of this device.
INT oacSnmpMaxMsgSize	1.3.6.1.4.1.13191.10.3.4.20.1.5	INTEGER	read-write	maximum size of the snmp message
oacSnmpCommunityConfigTable	1.3.6.1.4.1.13191.10.3.4.20.1.6		not-accessible	This table will hold the configuration required to apply the SNMP view on a read/write V2C community.
oacSnmpCommunityConfigEntry	1.3.6.1.4.1.13191.10.3.4.20.1.6.1		not-accessible	A Entry will hold the view applied for a community.
OCT oacSnmpCommunityString	1.3.6.1.4.1.13191.10.3.4.20.1.6.1.1	OCTET STRING	not-accessible	The community string
INT oacSnmpCommunityAccessType	1.3.6.1.4.1.13191.10.3.4.20.1.6.1.2	INTEGER	not-accessible	This object identifies the type of community for which this community string is attached.
INT oacSnmpCommunityAclType	1.3.6.1.4.1.13191.10.3.4.20.1.6.1.3	INTEGER	read-create	Ipv4 or Ipv6 Acl attached to this snmp community string
OCT oacSnmpCommunityAclName	1.3.6.1.4.1.13191.10.3.4.20.1.6.1.4	OCTET STRING	read-create	Ipv4 Acl attached to this snmp community string
OCT oacSnmpCommunityV2GroupName	1.3.6.1.4.1.13191.10.3.4.20.1.6.1.5	OCTET STRING	read-create	Snmp group attached to this community string
T/F oacSnmpCommunityisEncrypted	1.3.6.1.4.1.13191.10.3.4.20.1.6.1.6	TruthValue	read-create	if true the string should be encrypted. If false it will be a plain text string.
ROW oacSnmpCommunityRowStatus	1.3.6.1.4.1.13191.10.3.4.20.1.6.1.7	RowStatus	read-create	The row status for this entry
OCT oacSnmpEngineId	1.3.6.1.4.1.13191.10.3.4.20.1.7	OCTET STRING	read-write	By default on OneOS the engineId is created by using the mac address of FastEthernet Interface.
IP oacSnmpRemoteAgentIpAddr	1.3.6.1.4.1.13191.10.3.4.20.1.8	IpAddress	read-write	From the ip address provided remote agent's engine id is discovered.
oacSnmpRemoteEngineIdConfigTable	1.3.6.1.4.1.13191.10.3.4.20.1.9		not-accessible	This table will hold the configuration for snmp traps.
oacSnmpRemoteEngineIdConfigEntry	1.3.6.1.4.1.13191.10.3.4.20.1.9.1		not-accessible	A Entry will hold if a trap is enabled or disabled.
OCT oacSnmpRemoteEngineId	1.3.6.1.4.1.13191.10.3.4.20.1.9.1.1	OCTET STRING	not-accessible	Engine Id of the remote.
IP oacSnmpRemoteEngineIpAddr	1.3.6.1.4.1.13191.10.3.4.20.1.9.1.2	IpAddress	read-create	if true the string should be encrypted. If false it will be a plain text string.
INT oacSnmpRemoteEngineMaxMsgSize	1.3.6.1.4.1.13191.10.3.4.20.1.9.1.3	INTEGER	read-create	if true the string should be encrypted. if false it will be a plain text string.
ROW oacSnmpRemoteEngineRowstatus	1.3.6.1.4.1.13191.10.3.4.20.1.9.1.4	RowStatus	read-create	The row status for this entry
oacSnmpTrapConfigTable	1.3.6.1.4.1.13191.10.3.4.20.1.10		not-accessible	This table will hold the configuration for snmp traps.
oacSnmpTrapConfigEntry	1.3.6.1.4.1.13191.10.3.4.20.1.10.1		not-accessible	A Entry will hold if a trap is enabled or disabled.
INT oacSnmpTrapConfigType	1.3.6.1.4.1.13191.10.3.4.20.1.10.1.1	INTEGER	not-accessible	The user can enable or disable the following traps: 1. standard, 2. acl, 3. bgp, 4. ipsec, 5. isakmp, 6. isdn, 7. nat, 8. pstn, 9. vrrp
T/F oacSnmpTrapConfigisEnabled	1.3.6.1.4.1.13191.10.3.4.20.1.10.1.2	TruthValue	read-create	if true the string should be encrypted. if false it will be a plain text string.
ROW oacSnmpTrapConfigRowStatus	1.3.6.1.4.1.13191.10.3.4.20.1.10.1.3	RowStatus	read-create	The row status for this entry
oacSnmpConfigConformance	1.3.6.1.4.1.13191.10.3.4.20.2
oacSnmpConfigGroups	1.3.6.1.4.1.13191.10.3.4.20.2.1
oacSnmpConfigGroup	1.3.6.1.4.1.13191.10.3.4.20.2.1.1			Group of SNMP objects
oacSnmpCompls	1.3.6.1.4.1.13191.10.3.4.20.2.2

RFC description

Configures SNMPv3 users, views, and security groups on OneAccess OneOS devices for network management.

Start monitoring OneAccess (Ekinops) WAN router (SNMP agent configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ONEACCESS-SNMP-CONFIG-MIB

What Is ONEACCESS-SNMP-CONFIG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description