OMNI-gx2drr4x-MIB

All MIBs › OMNI-gx2drr4x-MIB

Category: Cable/DOCSIS

Description: Manages the Cisco/Scientific-Atlanta GX2 DRR4X downstream RF receiver card in HFC optical node deployments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OMNI-gx2drr4x-MIB?

OMNI-gx2drr4x-MIB is a vendor MIB (Cisco/Scientific-Atlanta OMNI platform) for the GX2 DRR4X downstream RF receiver card, used in Hybrid Fiber-Coax (HFC) optical node equipment in cable/broadband access networks. It is expected to expose configuration and status data for the RF receiver card's downstream signal parameters, such as RF input level, channel configuration, and card operational status within the optical node chassis. Because no sample objects were available, its exact monitoring capability cannot be confirmed in detail, but a downstream RF receiver card MIB of this type typically supports hardware health monitoring such as card presence/operational status and RF signal level, relevant to detecting a failed or degraded receiver card. It is a vendor-specific module likely built on the broader OMNI/Scientific-Atlanta optical node platform MIB framework for chassis and slot management. It is typically deployed in cable operator HFC network optical nodes that convert fiber-delivered signals to RF for coax distribution to subscribers. Engineers can download the OMNI-gx2drr4x-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OMNI-gx2drr4x-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General Instrument OmniStar GX2 HFC headend/optical node (GX2 DRR4X downstream RF receiver card)

Monitoring Examples

No sample objects were provided for this MIB, so a concrete monitoring example with real object names cannot be honestly given; in general terms an operator would expect to poll the GX2 DRR4X card's operational status and downstream RF signal level to detect a failed or degraded receiver card affecting subscriber service in that HFC node.

Imported Objects

From GX2HFC-MIB

gx2Drr4x

OBJECT-IDENTITY

From NLSBBN-TRAPS-MIB

trapChangedObjectId	OBJECT-TYPE
trapChangedValueDisplayString	OBJECT-TYPE
trapChangedValueInteger	OBJECT-TYPE
trapIdentifier	OBJECT-TYPE
trapNETrapLastTrapTimeStamp	OBJECT-TYPE
trapNetworkElemAdminState	OBJECT-TYPE
trapNetworkElemAlarmStatus	OBJECT-TYPE
trapNetworkElemAvailStatus	OBJECT-TYPE
trapNetworkElemModelNumber	OBJECT-TYPE
trapNetworkElemOperState	OBJECT-TYPE
trapNetworkElemSerialNum	OBJECT-TYPE
trapPerceivedSeverity	OBJECT-TYPE
trapText	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF trapdrrConfigChangeInteger	1.3.6.1.4.1.1166.6.1.2.14.0.1			This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapdrrConfigChangeDisplayString	1.3.6.1.4.1.1166.6.1.2.14.0.2			This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapdrr12VCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.3			This trap is issued when the 12V power supply Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapdrrModuleTempAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.4			This trap is issued when the Internal Module Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapdrrFanCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.5			This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapdrrFlashAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.6			This trap is issued when the detects an error during Flash memory operations.
NTF trapdrrBankBootAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.7			This trap is issued when the module detects an error while booting from bank 0 or bank 1.
NTF trapdrrAlarmDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.8			This trap is issued when the Alarm Data CRC is incorrect.
NTF trapdrrHardwareErrAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.9			This trap is issued when hardware is abnormal.
NTF trapdrrOpticalSignalAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.10			This trap is issued when the optical signal is beyond the preset range.
NTF trapdrrFactoryDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.11			This trap is issued when the Factory Data CRC is incorrect.
NTF trapdrrResetFactoryDefaultAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.12			This trap is issued when the Factory Default Reset occurs.
NTF trapdrrTripPointAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.13			This trap is issued when the Input optical power is lower than the custumer set trip point and trippoint mode as ALARM_ONLY or SWITCH & ALARM.
NTF trapdrrLinkAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.14			This trap is issued when receiver is out of SYN with transmitter
NTF trapdrrCalibrationDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.14.0.15			This trap is issued when the Calibration Data CRC is incorrect
gx2drr4xDescriptor	1.3.6.1.4.1.1166.6.1.2.14.1
gx2drr4xAnalogTable	1.3.6.1.4.1.1166.6.1.2.14.2		not-accessible	This table contains gx2drr4x specific analog parameters with nominal,limits and current values.
gx2drr4xAnalogEntry	1.3.6.1.4.1.1166.6.1.2.14.2.1		not-accessible	This list contains the analog parameters and descriptions.
INT gx2drr4xAnalogTableIndex	1.3.6.1.4.1.1166.6.1.2.14.2.1.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR drr4xlabelRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.2	DisplayString	read-only	The value of this object provides the label of the RF Channel A Attenuation Analog parameter.
STR drr4xuomRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.3	DisplayString	read-only	The value of this object provides the Unit of Measure of the RF Channel A Attenuation Analog parameter. The unit is in dB
FLO drr4xmajorHighRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.4	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xmajorLowRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.5	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorHighRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.6	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorLowRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.7	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xcurrentValueRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.8	Float	read-write	The value of this object provides the Current value of the RF Channel A Attenuation Analog parameter.
INT drr4xstateFlagRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.9	INTEGER	read-only	The value of this object provides the state of the RF Channel A Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr4xminValueRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.10	Float	read-only	The value of this object provides the minimum value the RF Channel A Attenuation Analog parameter can achive.
FLO drr4xmaxValueRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.11	Float	read-only	The value of this object provides the maximum value the RF Channel A Attenuation Analog parameter can achive.
INT drr4xalarmStateRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.12	INTEGER	read-only	The value of this object provides the curent alarm state of the RF Channel A Attenuation Analog parameter.
STR drr4xlabelRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.13	DisplayString	read-only	The value of this object provides the label of the RF Channel B Attenuation Analog parameter.
STR drr4xuomRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.14	DisplayString	read-only	The value of this object provides the Unit of Measure of the RF Channel B Attenuation Analog parameter.
FLO drr4xmajorHighRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.15	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xmajorLowRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.16	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorHighRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.17	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorLowRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.18	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. It is kept here for persistence.
FLO drr4xcurrentValueRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.19	Float	read-write	The value of this object provides the Current value of the RF Channel B Attenuation Analog parameter. The unit is dB
INT drr4xstateFlagRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.20	INTEGER	read-only	The value of this object provides the state of the RF Channel B Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr4xminValueRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.21	Float	read-only	The value of this object provides the minimum value the RF Channel B Attenuation Analog parameter can achive.
FLO drr4xmaxValueRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.22	Float	read-only	The value of this object provides the maximum value the RF Channel B Attenuation Analog parameter can achive.
INT drr4xalarmStateRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.23	INTEGER	read-only	The value of this object provides the curent alarm state of the RF Channel B Attenuation Analog parameter.
STR drr4xlabelRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.24	DisplayString	read-only	The value of this object provides the label of the RF Channel C Attenuation Analog parameter.
STR drr4xuomRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.25	DisplayString	read-only	The value of this object provides the Unit of Measure of the RF Channel C Attenuation Analog parameter.
FLO drr4xmajorHighRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.26	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xmajorLowRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.27	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorHighRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.28	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorLowRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.29	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. It is kept here for persistence.
FLO drr4xcurrentValueRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.30	Float	read-write	The value of this object provides the Current value of the RF Channel C Attenuation Analog parameter. The unit is dB
INT drr4xstateFlagRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.31	INTEGER	read-only	The value of this object provides the state of the RF Channel C Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr4xminValueRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.32	Float	read-only	The value of this object provides the minimum value the RF Channel C Attenuation Analog parameter can achive.
FLO drr4xmaxValueRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.33	Float	read-only	The value of this object provides the maximum value the RF Channel C Attenuation Analog parameter can achive.
INT drr4xalarmStateRFCAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.34	INTEGER	read-only	The value of this object provides the curent alarm state of the RF Channel C Attenuation Analog parameter.
STR drr4xlabelRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.35	DisplayString	read-only	The value of this object provides the label of the RF Channel D Attenuation Analog parameter.
STR drr4xuomRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.36	DisplayString	read-only	The value of this object provides the Unit of Measure of the RF Channel D Attenuation Analog parameter.
FLO drr4xmajorHighRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.37	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xmajorLowRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.38	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorHighRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.39	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorLowRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.40	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. It is kept here for persistence.
FLO drr4xcurrentValueRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.41	Float	read-write	The value of this object provides the Current value of the RF Channel D Attenuation Analog parameter. The unit is dB
INT drr4xstateFlagRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.42	INTEGER	read-only	The value of this object provides the state of the RF Channel D Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr4xminValueRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.43	Float	read-only	The value of this object provides the minimum value the RF Channel B Attenuation Analog parameter can achive.
FLO drr4xmaxValueRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.44	Float	read-only	The value of this object provides the maximum value the RF Channel D Attenuation Analog parameter can achive.
INT drr4xalarmStateRFDAttenuation	1.3.6.1.4.1.1166.6.1.2.14.2.1.45	INTEGER	read-only	The value of this object provides the curent alarm state of the RF Channel D Attenuation Analog parameter.
STR drr4xlabelTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.46	DisplayString	read-only	The value of this object provides the label of the trip point level Analog parameter.
STR drr4xuomTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.47	DisplayString	read-only	The value of this object provides the Unit of Measure of the trip point level Analog parameter.
FLO drr4xmajorHighTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.48	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xmajorLowTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.49	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorHighTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.50	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorLowTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.51	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xcurrentValueTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.52	Float	read-write	The value of this object provides the Current value of the trip point level Analog parameter. The trip point level set the custumer preferred optical input level. This parameter combined with trippoint mode decides the trippoint alarm and RF channel output impedance. when optical power level is lower than trip point level(Set by this parameter) 1) When trip point mode is ALARM_SWITCH, trip point alarm will be generated and RF output impedance will be changed to high impedance. 2) When trippoint mode is ALARM_ONLY, trippoint alarm will be generated but RF output inpedance remains to be low impedance. This trip point level value is a floating point number that is represented as an IEEE 32 bit number.
INT drr4xstateFlagTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.53	INTEGER	read-only	The value of this object provides the state of the trip point level Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr4xminValueTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.54	Float	read-only	The value of this object provides the minimum value the trip point level Analog parameter can achive.
FLO drr4xmaxValueTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.55	Float	read-only	The value of this object provides the maximum value the trip point level Analog parameter can achive.
INT drr4xalarmStateTrippointLevel	1.3.6.1.4.1.1166.6.1.2.14.2.1.56	INTEGER	read-only	The value of this object provides the curent alarm state of the trip point level Analog parameter.
STR drr4xlabelOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.57	DisplayString	read-only	The value of this object provides the label of the Optical Power Current Analog parameter.
STR drr4xuomOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.58	DisplayString	read-only	The value of this object provides the Unit of Measure of the Optical Power Current Analog parameter.
FLO drr4xmajorHighOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.59	Float	read-only	The value of this object provides the Major High alarm value of the Optical Power Current Analog parameter.
FLO drr4xmajorLowOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.60	Float	read-only	The value of this object provides the Major Low alarm value of the Optical Power Current Analog parameter.
FLO drr4xminorHighOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.61	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorLowOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.62	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xcurrentValueOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.63	Float	read-only	The value of this object provides the Current value of the Optical Power Current Analog parameter. The input optical power in lower than min value, drr4xcurrentValueOptCurrent will report -99dBm The input optical power in higher than this value, drr4xcurrentValueOptCurrent will report 99dBm
INT drr4xstateFlagOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.64	INTEGER	read-only	The value of this object provides the state of the Optical Power Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr4xminValueOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.65	Float	read-only	This is recommended min range for display gauge
FLO drr4xmaxValueOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.66	Float	read-only	This is recommended max range for display gauge
INT drr4xalarmStateOptCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.67	INTEGER	read-only	The value of this object provides the curent alarm state of the Optical Power Current Analog parameter.
STR drr4xlabel12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.68	DisplayString	read-only	The value of this object provides the label of the 12v power supply Current Analog parameter.
STR drr4xuom12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.69	DisplayString	read-only	The value of this object provides the Unit of Measure of the 12v power supply Current Analog parameter.
FLO drr4xmajorHigh12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.70	Float	read-only	The value of this object provides the Major High alarm value of the 12v power supply Current Analog parameter.
FLO drr4xmajorLow12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.71	Float	read-only	The value of this object provides the Major Low alarm value of the 12v power supply Current Analog parameter.
FLO drr4xminorHigh12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.72	Float	read-only	The value of this object provides the Minor High alarm value of the 12v power supply Current Analog parameter.
FLO drr4xminorLow12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.73	Float	read-only	The value of this object provides the Minor Low alarm value of the 12v power supply Current Analog parameter.
FLO drr4xcurrentValue12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.74	Float	read-only	The value of this object provides the Current value of the 12v power supply Current parameter.
INT drr4xstateFlag12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.75	INTEGER	read-only	The value of this object provides the state of the 12v power supply Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr4xminValue12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.76	Float	read-only	The value of this object provides the minimum value the 12v power supply Current Analog parameter can achive.
FLO drr4xmaxValue12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.77	Float	read-only	The value of this object provides the maximum value the 12v power supply Current Analog parameter can achive.
INT drr4xalarmState12VCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.78	INTEGER	read-only	The value of this object provides the curent alarm state of the 12v power supply Current Analog parameter.
STR drr4xlabelModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.79	DisplayString	read-only	The value of this object provides the label of the Module Temperature Analog parameter.
STR drr4xuomModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.80	DisplayString	read-only	The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
FLO drr4xmajorHighModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.81	Float	read-only	The value of this object provides the Major High alarm value of the Module Temperature Analog parameter.
FLO drr4xmajorLowModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.82	Float	read-only	The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter.
FLO drr4xminorHighModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.83	Float	read-only	The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter.
FLO drr4xminorLowModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.84	Float	read-only	The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter.
FLO drr4xcurrentValueModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.85	Float	read-only	The value of this object provides the Current value of the Module Temperature Analog parameter.
INT drr4xstateFlagModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.86	INTEGER	read-only	The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr4xminValueModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.87	Float	read-only	The value of this object provides the minimum value the Module Temperature Analog parameter can achive.
FLO drr4xmaxValueModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.88	Float	read-only	The value of this object provides the maximum value the Module Temperature Analog parameter can achive.
INT drr4xalarmStateModTemp	1.3.6.1.4.1.1166.6.1.2.14.2.1.89	INTEGER	read-only	The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
STR drr4xlabelFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.90	DisplayString	read-only	The value of this object provides the label of the Fan Current Analog parameter.
STR drr4xuomFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.91	DisplayString	read-only	The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
FLO drr4xmajorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.92	Float	read-only	The value of this object provides the Major High alarm value of the Fan Current Analog parameter.
FLO drr4xmajorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.93	Float	read-only	The value of this object provides the Major Low alarm value of the Fan Current Analog parameter.
FLO drr4xminorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.94	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xminorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.95	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr4xcurrentValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.96	Float	read-only	The value of this object provides the Current value of the Fan Current Analog parameter.
INT drr4xstateFlagFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.97	INTEGER	read-only	The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr4xminValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.98	Float	read-only	The value of this object provides the minimum value the Fan Current Analog parameter can achive.
FLO drr4xmaxValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.99	Float	read-only	The value of this object provides the maximum value the Fan Current Analog parameter can achive.
INT drr4xalarmStateFanCurrent	1.3.6.1.4.1.1166.6.1.2.14.2.1.100	INTEGER	read-only	The value of this object provides the curent alarm state of the Fan Current Analog parameter.
gx2drr4xDigitalTable	1.3.6.1.4.1.1166.6.1.2.14.3		not-accessible	This table contains gx2drr4x specific digital parameters with nominal and current values.
gx2drr4xDigitalEntry	1.3.6.1.4.1.1166.6.1.2.14.3.2		not-accessible	This list contains individual digital parameters and descriptions.
INT gx2drr4xDigitalTableIndex	1.3.6.1.4.1.1166.6.1.2.14.3.2.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR drr4xlabelTrippointMode	1.3.6.1.4.1.1166.6.1.2.14.3.2.2	DisplayString	read-only	The value of this object provides the label of the Trip point mode Digital parameter. The trip point mode defines the RF switch action based on the optical power input to the DRR
STR drr4xenumTrippointMode	1.3.6.1.4.1.1166.6.1.2.14.3.2.3	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT drr4xvalueTrippointMode	1.3.6.1.4.1.1166.6.1.2.14.3.2.4	INTEGER	read-write	The value of this object is the current value of trip point mode. There are three possible value: 1-off, 2-alarm_only, 3-alarm&switch. If module input optical power is higher than the preset trippoint value, no operational difference for these three modes. If module input optical power is less than the preset trippoint value, 1) When trippoint mode is OFF, no trippoint alarm will be generated and RF output impedance will stay normal as low. 2) When tripoint mode is ALARM_ONLY, trip_point alarm will be generated when the input optical power lower than the preset trippoint level but RF output impedance will stay normal as low. 3) When trippoint mode is ALARM_SWITCH, trip point alarm will be generated and RF output impedance will switch to abnorml
INT drr4xstateflagTrippointMode	1.3.6.1.4.1.1166.6.1.2.14.3.2.5	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr4xlabelFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.14.3.2.6	DisplayString	read-only	The value of this object provides the label of the Factory Default Reset Digital parameter.
STR drr4xenumFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.14.3.2.7	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT drr4xvalueFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.14.3.2.8	INTEGER	read-write	The read of this value will return a invalid value. The read will not reflect the actual setting value for this parameter
INT drr4xstateflagFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.14.3.2.9	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
gx2drr4xStatusTable	1.3.6.1.4.1.1166.6.1.2.14.4		not-accessible	This table contains gx2drr4x specific status parameters with nominal and current values.
gx2drr4xStatusEntry	1.3.6.1.4.1.1166.6.1.2.14.4.3		not-accessible	This list contains Status parameters and descriptions.
INT gx2drr4xStatusTableIndex	1.3.6.1.4.1.1166.6.1.2.14.4.3.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR drr4xlabelBoot	1.3.6.1.4.1.1166.6.1.2.14.4.3.2	DisplayString	read-only	The value of this object provides the label of the Boot Status parameter.
INT drr4xvalueBoot	1.3.6.1.4.1.1166.6.1.2.14.4.3.3	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr4xstateflagBoot	1.3.6.1.4.1.1166.6.1.2.14.4.3.4	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr4xlabelFlash	1.3.6.1.4.1.1166.6.1.2.14.4.3.5	DisplayString	read-only	The value of this object provides the label of the Flash Status parameter.
INT drr4xvalueFlash	1.3.6.1.4.1.1166.6.1.2.14.4.3.6	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr4xstateflagFlash	1.3.6.1.4.1.1166.6.1.2.14.4.3.7	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr4xlabelFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.14.4.3.8	DisplayString	read-only	The value of this object provides the label of the Factory Data CRC Status parameter.
INT drr4xvalueFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.14.4.3.9	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr4xstateflagFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.14.4.3.10	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr4xlabelAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.14.4.3.11	DisplayString	read-only	The value of this object provides the label of the Alarm Data Crc parameter.
INT drr4xvalueAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.14.4.3.12	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr4xstateflagAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.14.4.3.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr4xlabelCalibrationDataCrc	1.3.6.1.4.1.1166.6.1.2.14.4.3.14	DisplayString	read-only	The value of this object provides the label of the Calibration Data Crc parameter.
INT drr4xvalueCalibrationDataCrc	1.3.6.1.4.1.1166.6.1.2.14.4.3.15	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr4xstateflagCalibrationDataCrc	1.3.6.1.4.1.1166.6.1.2.14.4.3.16	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr4xlabelHardwareStatus	1.3.6.1.4.1.1166.6.1.2.14.4.3.17	DisplayString	read-only	The value of this object provides the label of the Module Hardware Status parameter.
INT drr4xvalueHardwareStatus	1.3.6.1.4.1.1166.6.1.2.14.4.3.18	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr4xstateflagHardwareStatus	1.3.6.1.4.1.1166.6.1.2.14.4.3.19	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr4xlabelOpticTripPointStatus	1.3.6.1.4.1.1166.6.1.2.14.4.3.20	DisplayString	read-only	The value of this object provides the label of the Optical Trip Point Status parameter.It indicates whether the optical power is above(0) or below(1) trip point value
INT drr4xvalueOpticTripPointStatus	1.3.6.1.4.1.1166.6.1.2.14.4.3.21	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr4xstateflagOpticTripPointStatus	1.3.6.1.4.1.1166.6.1.2.14.4.3.22	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr4xlabelLinkStatus	1.3.6.1.4.1.1166.6.1.2.14.4.3.23	DisplayString	read-only	The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect the optical signal.
INT drr4xvalueLinkStatus	1.3.6.1.4.1.1166.6.1.2.14.4.3.24	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr4xstateflagLinkStatus	1.3.6.1.4.1.1166.6.1.2.14.4.3.25	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
gx2drr4xFactoryTable	1.3.6.1.4.1.1166.6.1.2.14.5		not-accessible	This table contains gx2drr4x specific factory setting parameters with nominal and current values.
gx2drr4xFactoryEntry	1.3.6.1.4.1.1166.6.1.2.14.5.4		not-accessible	This list contains Factory setting parameters and descriptions.
INT gx2drr4xFactoryTableIndex	1.3.6.1.4.1.1166.6.1.2.14.5.4.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
INT drr4xbootControlByte	1.3.6.1.4.1.1166.6.1.2.14.5.4.2	INTEGER	read-only	The value of this object indicates which bank the firmware is currently being boot from.
INT drr4xbootStatusByte	1.3.6.1.4.1.1166.6.1.2.14.5.4.3	INTEGER	read-only	This object indicates the status of the last boot
INT drr4xbank1CRC	1.3.6.1.4.1.1166.6.1.2.14.5.4.4	INTEGER	read-only	This object provides the CRC code of bank 0.
INT drr4xbank2CRC	1.3.6.1.4.1.1166.6.1.2.14.5.4.5	INTEGER	read-only	This object provides the CRC code of bank 1.
INT drr4xprgEEPROMByte	1.3.6.1.4.1.1166.6.1.2.14.5.4.6	INTEGER	read-only	This object indicates if the EEPROM has been programmed
INT drr4xfactoryCRC	1.3.6.1.4.1.1166.6.1.2.14.5.4.7	INTEGER	read-only	This object provides the CRC code for the Factory data.
INT drr4xcalculateCRC	1.3.6.1.4.1.1166.6.1.2.14.5.4.8	INTEGER	read-only	This object indicates which of the Emnums will have the CRC calculated (1-factory, 2-alarm, 3-calibration).
INT drr4xhourMeter	1.3.6.1.4.1.1166.6.1.2.14.5.4.9	INTEGER	read-only	This object provides the hour meter reading of the module.
INT drr4xflashPrgCntA	1.3.6.1.4.1.1166.6.1.2.14.5.4.10	INTEGER	read-only	This object provides the number of times Bank 0 flash has been programmed.
INT drr4xflashPrgCntB	1.3.6.1.4.1.1166.6.1.2.14.5.4.11	INTEGER	read-only	This object provides the number of times Bank 1 flash has been programmed.
STR drr4xflashBankARev	1.3.6.1.4.1.1166.6.1.2.14.5.4.12	DisplayString	read-only	This object provides the revision of flash bank 0.
STR drr4xflashBankBRev	1.3.6.1.4.1.1166.6.1.2.14.5.4.13	DisplayString	read-only	This object provides the revision of flash bank 1.
STR drr4xSubAgentRev	1.3.6.1.4.1.1166.6.1.2.14.5.4.14	DisplayString	read-only	This object provides the subagent revision of receiver module.

RFC description

Management for OMNISTAR digital receiver return 4X module in HFC networks.

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 DRR4X downstream RF receiver card) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OMNI-gx2drr4x-MIB

What Is OMNI-gx2drr4x-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description