OMNI-gx2Dm870-MIB

All MIBs › OMNI-gx2Dm870-MIB

Category: CATV and HFC

Description: Manages the Cisco/Scientific Atlanta GX2 Dm870 downstream modulator and optical node module in HFC networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OMNI-gx2Dm870-MIB?

OMNI-gx2Dm870-MIB is a private MIB (built on GX2HFC-MIB, HFC — Hybrid Fiber-Coax cable-plant monitoring family) reporting nominal-vs-current parameters for the gx2Dm870 module, likely an RF/optical monitoring probe. Its analog table records, per monitored parameter, a label/unit-of-measure, major/minor high/low alarm limits, current value, state flag, min/max observed value, and alarm state, with parallel digital and counter (Cnt) tables, plus status and factory tables. As a performance/hardware-status MIB it lets a cable operator watch an HFC plant parameter (e.g., RF level) against nominal alarm thresholds. It is deployed on this vendor's HFC cable-plant monitoring probes (gx2Dm870 module). Engineers can download the OMNI-gx2Dm870-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OMNI-gx2Dm870-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General Instrument OmniStar GX2 HFC headend/optical node (gx2Dm870 RF/optical monitoring probe module)

Monitoring Examples

A cable operator checks dm870currentValueOffsetNomMonitor against dm870majorLowOffsetNomMonitor to catch an HFC plant parameter drifting toward an alarm threshold on a gx2Dm870 monitoring probe.

What Can Be Monitored

monitored parameter current value vs. nominal alarm thresholds

Imported Objects

From GX2HFC-MIB

gx2Dm870

OBJECT-IDENTITY

From NLS-BBNIDENT-MIB

gi	OBJECT-IDENTITY
motproxies	OBJECT-IDENTITY

From NLSBBN-TRAPS-MIB

trapChangedObjectId	OBJECT-TYPE
trapChangedValueDisplayString	OBJECT-TYPE
trapChangedValueInteger	OBJECT-TYPE
trapIdentifier	OBJECT-TYPE
trapNETrapLastTrapTimeStamp	OBJECT-TYPE
trapNetworkElemAdminState	OBJECT-TYPE
trapNetworkElemAlarmStatus	OBJECT-TYPE
trapNetworkElemAvailStatus	OBJECT-TYPE
trapNetworkElemModelNumber	OBJECT-TYPE
trapNetworkElemOperState	OBJECT-TYPE
trapNetworkElemSerialNum	OBJECT-TYPE
trapPerceivedSeverity	OBJECT-TYPE
trapText	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks

From RFC1213-MIB

DisplayString
sysUpTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF trapDM870ConfigChangeInteger	1.3.6.1.4.1.1166.6.1.2.16.0.1			This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapDM870ConfigChangeDisplayString	1.3.6.1.4.1.1166.6.1.2.16.0.2			This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapDM870fanCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.3			This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapDM870ModuleTempAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.4			This trap is issued when the Module Temperature parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapDM870omiOffsetAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.5			This trap is issued when the OMI Offset goes out of range.
NTF trapDM870tecCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.6			This trap is issued when the TEC Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapDM870LaserCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.7			This trap is issued when the Laser Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapDM870LaserTempAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.8			This trap is issued when the Laser Temp parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapDM870LaserPowerAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.9			This trap is issued when the Laser Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapDM870FlashAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.10			This trap is issued when the Laser Modules detects an error during Flash memory operations.
NTF trapDM870BankBootAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.11			This trap is issued when the Laser Modules detects an error while booting from bank 0 or bank 1.
NTF trapDM870AlarmDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.12			This trap is issued when the Alarm Data CRC is incorrect.
NTF trapDM870FactoryDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.13			This trap is issued when the Factory Data CRC is incorrect.
NTF trapDM870CalDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.14			This trap is issued when the Cal Data CRC is incorrect.
NTF trapDM870ResetFacDefault	1.3.6.1.4.1.1166.6.1.2.16.0.15			This trap is issued when the DM870 resets to factory defaults
NTF trapDM870UserRFOffAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.16			This trap is issued when the the User RF is turned off.
NTF trapDM870UserOpticalOffAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.17			This trap is issued when the User Optical Power is turned off.
NTF trapDM870UserSBSOffAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.18			This trap is issued when the User SBS is turned off.
NTF trapDM870RFInputAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.19			This trap is issued when the Laser Modules RF input parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapDM870RFOverloadAlarm	1.3.6.1.4.1.1166.6.1.2.16.0.20			This trap is issued when the Laser Modules RF overload parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
gx2Dm870Descriptor	1.3.6.1.4.1.1166.6.1.2.16.1
gx2Dm870AnalogTable	1.3.6.1.4.1.1166.6.1.2.16.2		not-accessible	This table contains gx2Dm870 specific parameters with nominal and current values.
gx2Dm870AnalogEntry	1.3.6.1.4.1.1166.6.1.2.16.2.1		not-accessible	This list contains the analog parameters and descriptions.
INT gx2Dm870AnalogTableIndex	1.3.6.1.4.1.1166.6.1.2.16.2.1.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR dm870labelOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.2	DisplayString	read-only	The value of this object provides the label of the Offset Monitor Analog parameter.
STR dm870uomOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.3	DisplayString	read-only	The value of this object provides the Unit of Measure of the Offset Monitor Analog parameter.
FLO dm870majorHighOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.4	Float	read-only	The value of this object provides the Major High alarm value of the Offset Monitor Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870majorLowOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.5	Float	read-only	The value of this object provides the Major Low alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorHighOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.6	Float	read-only	The value of this object provides the Minor High alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorLowOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.7	Float	read-only	The value of this object provides the Minor Low alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870currentValueOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.8	Float	read-only	The value of this object provides the Current value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870stateFlagOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.9	INTEGER	read-only	The value of this object provides the state of the Offset Monitor Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO dm870minValueOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.10	Float	read-only	The value of this object provides the minimum value the Offset Monitor Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO dm870maxValueOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.11	Float	read-only	The value of this object provides the maximum value the Offset Monitor Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870alarmStateOffsetNomMonitor	1.3.6.1.4.1.1166.6.1.2.16.2.1.12	INTEGER	read-only	The value of this object provides the curent alarm state of the Offset Monitor Power Analog parameter.
STR dm870labelOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.13	DisplayString	read-only	The value of this object provides the label of the Offset Control Analog parameter.
STR dm870uomOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.14	DisplayString	read-only	The value of this object provides the Unit of Measure of the Offset Control Analog parameter..
FLO dm870majorHighOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.15	Float	read-only	The value of this object provides the Major High alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870majorLowOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.16	Float	read-only	The value of this object provides the Major Low alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorHighOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.17	Float	read-only	The value of this object provides the Minor High alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorLowOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.18	Float	read-only	The value of this object provides the Minor Low alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870currentValueOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.19	Float	read-write	The value of this object provides the Current value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870stateFlagOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.20	INTEGER	read-only	The value of this object provides the state of the Offset Control Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO dm870minValueOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.21	Float	read-only	The value of this object provides the minimum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO dm870maxValueOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.22	Float	read-only	The value of this object provides the maximum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870alarmStateOffsetNomCnt	1.3.6.1.4.1.1166.6.1.2.16.2.1.23	INTEGER	read-only	The value of this object provides the curent alarm state of the Offset Control Analog parameter.
STR dm870labelAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.24	DisplayString	read-only	The value of this object provides the label of the Attenuator Setting Current Analog parameter.
STR dm870uomAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.25	DisplayString	read-only	The value of this object provides the Unit of Measure of the Attenuator Setting Analog parameter.
FLO dm870majorHighAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.26	Float	read-only	The value of this object provides the Major High alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870majorLowAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.27	Float	read-only	The value of this object provides the Major Low alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorHighAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.28	Float	read-only	The value of this object provides the Minor High alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorLowAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.29	Float	read-only	The value of this object provides the Minor Low alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870currentValueAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.30	Float	read-write	The value of this object provides the Current value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870stateFlagAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.31	INTEGER	read-only	The value of this object provides the state of the Attenuator Setting Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO dm870minValueAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.32	Float	read-only	The value of this object provides the minimum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO dm870maxValueAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.33	Float	read-only	The value of this object provides the maximum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870alarmStateAttenSetting	1.3.6.1.4.1.1166.6.1.2.16.2.1.34	INTEGER	read-only	The value of this object provides the curent alarm state of the Attenuator Setting Analog parameter.
STR dm870labelLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.35	DisplayString	read-only	The value of this object provides the label of the Laser Optical Power Analog parameter.
STR dm870uomLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.36	DisplayString	read-only	The value of this object provides the Unit of Measure of the Laser Optical Power Analog parameter.
FLO dm870majorHighLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.37	Float	read-only	The value of this object provides the Major High alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870majorLowLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.38	Float	read-only	The value of this object provides the Major Low alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorHighLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.39	Float	read-only	The value of this object provides the Minor High alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorLowLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.40	Float	read-only	The value of this object provides the Minor Low alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870currentValueLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.41	Float	read-only	The value of this object provides the Current value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870stateFlagLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.42	INTEGER	read-only	The value of this object provides the state of the Laser Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO dm870minValueLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.43	Float	read-only	The value of this object provides the minimum value the Laser Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO dm870maxValueLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.44	Float	read-only	The value of this object provides the maximum value the Laser Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870alarmStateLaserPower	1.3.6.1.4.1.1166.6.1.2.16.2.1.45	INTEGER	read-only	The value of this object provides the curent alarm state of the Laser Optical Power Analog parameter.
STR dm870labelLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.46	DisplayString	read-only	The value of this object provides the label of the Laser Temperature Analog parameter.
STR dm870uomLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.47	DisplayString	read-only	The value of this object provides the Unit of Measure of the Laser Temperature Analog parameter..
FLO dm870majorHighLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.48	Float	read-only	The value of this object provides the Major High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870majorLowLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.49	Float	read-only	The value of this object provides the Major Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorHighLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.50	Float	read-only	The value of this object provides the Minor High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorLowLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.51	Float	read-only	The value of this object provides the Minor Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870currentValueLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.52	Float	read-only	The value of this object provides the Current value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870stateFlagLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.53	INTEGER	read-only	The value of this object provides the state of the Laser Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO dm870minValueLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.54	Float	read-only	The value of this object provides the minimum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO dm870maxValueLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.55	Float	read-only	The value of this object provides the maximum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870alarmStateLaserTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.56	INTEGER	read-only	The value of this object provides the curent alarm state of the Laser Temperature Analog parameter.
STR dm870labelLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.57	DisplayString	read-only	The value of this object provides the label of the Laser Bias Current Analog parameter.
STR dm870uomLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.58	DisplayString	read-only	The value of this object provides the Unit of Measure of the Laser Bias Current Analog parameter.
FLO dm870majorHighLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.59	Float	read-only	The value of this object provides the Major High alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870majorLowLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.60	Float	read-only	The value of this object provides the Major Low alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorHighLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.61	Float	read-only	The value of this object provides the Minor High alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorLowLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.62	Float	read-only	The value of this object provides the Minor Low alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870currentValueLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.63	Float	read-only	The value of this object provides the Current value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870stateFlagLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.64	INTEGER	read-only	The value of this object provides the state of the Laser Bias Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO dm870minValueLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.65	Float	read-only	The value of this object provides the minimum value the Laser Bias Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO dm870maxValueLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.66	Float	read-only	The value of this object provides the maximum value the Laser Bias Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870alarmStateLaserCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.67	INTEGER	read-only	The value of this object provides the curent alarm state of the Laser Bias Current Analog parameter.
STR dm870labelTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.68	DisplayString	read-only	The value of this object provides the label of the TEC Current Analog parameter.
STR dm870uomTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.69	DisplayString	read-only	The value of this object provides the Unit of Measure of the TEC Current Analog parameter.
FLO dm870majorHighTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.70	Float	read-only	The value of this object provides the Major High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870majorLowTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.71	Float	read-only	The value of this object provides the Major Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorHighTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.72	Float	read-only	The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorLowTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.73	Float	read-only	The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870currentValueTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.74	Float	read-only	The value of this object provides the Current value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870stateFlagTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.75	INTEGER	read-only	The value of this object provides the state of the TEC Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO dm870minValueTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.76	Float	read-only	The value of this object provides the minimum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO dm870maxValueTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.77	Float	read-only	The value of this object provides the maximum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870alarmStateTecCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.78	INTEGER	read-only	The value of this object provides the curent alarm state of the TEC Current Analog parameter.
STR dm870labelModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.79	DisplayString	read-only	The value of this object provides the label of the Module Temperature Analog parameter.
STR dm870uomModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.80	DisplayString	read-only	The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
FLO dm870majorHighModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.81	Float	read-only	The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870majorLowModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.82	Float	read-only	The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorHighModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.83	Float	read-only	The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorLowModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.84	Float	read-only	The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870currentValueModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.85	Float	read-only	The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870stateFlagModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.86	INTEGER	read-only	The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO dm870minValueModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.87	Float	read-only	The value of this object provides the minimum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO dm870maxValueModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.88	Float	read-only	The value of this object provides the maximum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870alarmStateModTemp	1.3.6.1.4.1.1166.6.1.2.16.2.1.89	INTEGER	read-only	The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
STR dm870labelFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.90	DisplayString	read-only	The value of this object provides the label of the Fan Current Analog parameter.
STR dm870uomFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.91	DisplayString	read-only	The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
FLO dm870majorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.92	Float	read-only	The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870majorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.93	Float	read-only	The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.94	Float	read-only	The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870minorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.95	Float	read-only	The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused
FLO dm870currentValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.96	Float	read-only	The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870stateFlagFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.97	INTEGER	read-only	The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO dm870minValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.98	Float	read-only	The value of this object provides the minimum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO dm870maxValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.99	Float	read-only	The value of this object provides the maximum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number.
INT dm870alarmStateFanCurrent	1.3.6.1.4.1.1166.6.1.2.16.2.1.100	INTEGER	read-only	The value of this object provides the curent alarm state of the Fan Current Analog parameter.
gx2Dm870DigitalTable	1.3.6.1.4.1.1166.6.1.2.16.3		not-accessible	This table contains gx2Dm870m specific parameters with nominal and current values.
gx2Dm870DigitalEntry	1.3.6.1.4.1.1166.6.1.2.16.3.2		not-accessible	This list contains digital parameters and descriptions.
INT gx2Dm870DigitalTableIndex	1.3.6.1.4.1.1166.6.1.2.16.3.2.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR dm870labelRfInput	1.3.6.1.4.1.1166.6.1.2.16.3.2.2	DisplayString	read-only	The value of this object provides the label of the RF Input Control Digital parameter.
STR dm870enumRfInput	1.3.6.1.4.1.1166.6.1.2.16.3.2.3	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT dm870valueRfInput	1.3.6.1.4.1.1166.6.1.2.16.3.2.4	INTEGER	read-write	The value of this object is the current value of the parameter.
INT dm870stateflagRfInput	1.3.6.1.4.1.1166.6.1.2.16.3.2.5	INTEGER	read-only	The value of this object provides the state of the RF Input Control Digital parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR dm870labelOptOutput	1.3.6.1.4.1.1166.6.1.2.16.3.2.6	DisplayString	read-only	The value of this object provides the label of the Optical Output Control Digital parameter.
STR dm870enumOptOutput	1.3.6.1.4.1.1166.6.1.2.16.3.2.7	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT dm870valueOptOutput	1.3.6.1.4.1.1166.6.1.2.16.3.2.8	INTEGER	read-write	The value of this object is the current value of the parameter.
INT dm870stateflagOptOutput	1.3.6.1.4.1.1166.6.1.2.16.3.2.9	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR dm870labelSbsControl	1.3.6.1.4.1.1166.6.1.2.16.3.2.10	DisplayString	read-only	The value of this object provides the label of the SBS Control Digital parameter.
STR dm870enumSbsControl	1.3.6.1.4.1.1166.6.1.2.16.3.2.11	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT dm870valueSbsControl	1.3.6.1.4.1.1166.6.1.2.16.3.2.12	INTEGER	read-write	The value of this object is the current value of the parameter.
INT dm870stateflagSbsControl	1.3.6.1.4.1.1166.6.1.2.16.3.2.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR dm870labelLaserMode	1.3.6.1.4.1.1166.6.1.2.16.3.2.14	DisplayString	read-only	The value of this object provides the label of the Laser Mode Digital parameter.
STR dm870enumLaserMode	1.3.6.1.4.1.1166.6.1.2.16.3.2.15	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT dm870valueLaserMode	1.3.6.1.4.1.1166.6.1.2.16.3.2.16	INTEGER	read-write	The value of this object is the current value of the parameter.
INT dm870stateflagLaserMode	1.3.6.1.4.1.1166.6.1.2.16.3.2.17	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR dm870labelFactoryDefault	1.3.6.1.4.1.1166.6.1.2.16.3.2.18	DisplayString	read-only	The value of this object provides the label of the Factory Default Digital parameter.
STR dm870enumFactoryDefault	1.3.6.1.4.1.1166.6.1.2.16.3.2.19	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1..
INT dm870valueFactoryDefault	1.3.6.1.4.1.1166.6.1.2.16.3.2.20	INTEGER	read-write	The value of this object is the current value of the parameter. Return value is meaningless
INT dm870stateflagFactoryDefault	1.3.6.1.4.1.1166.6.1.2.16.3.2.21	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
gx2Dm870StatusTable	1.3.6.1.4.1.1166.6.1.2.16.4		not-accessible	This table contains gx2Dm870 specific parameters with nominal and current values.
gx2Dm870StatusEntry	1.3.6.1.4.1.1166.6.1.2.16.4.3		not-accessible	This list contains Status parameters and descriptions.
INT gx2Dm870StatusTableIndex	1.3.6.1.4.1.1166.6.1.2.16.4.3.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR dm870labelBoot	1.3.6.1.4.1.1166.6.1.2.16.4.3.2	DisplayString	read-only	The value of this object provides the label of the Boot Status Status parameter.
INT dm870valueBoot	1.3.6.1.4.1.1166.6.1.2.16.4.3.3	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT dm870stateflagBoot	1.3.6.1.4.1.1166.6.1.2.16.4.3.4	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR dm870labelFlash	1.3.6.1.4.1.1166.6.1.2.16.4.3.5	DisplayString	read-only	The value of this object provides the label of the Flash Status Status parameter.
INT dm870valueFlash	1.3.6.1.4.1.1166.6.1.2.16.4.3.6	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT dm870stateflagFlash	1.3.6.1.4.1.1166.6.1.2.16.4.3.7	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR dm870labelFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.16.4.3.8	DisplayString	read-only	The value of this object provides the label of the Factory Data CRC Status parameter.
INT dm870valueFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.16.4.3.9	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT dm870stateflagFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.16.4.3.10	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR dm870labelLaserDataCRC	1.3.6.1.4.1.1166.6.1.2.16.4.3.11	DisplayString	read-only	The value of this object provides the label of the Laser Data CRC Status parameter.
INT dm870valueLaserDataCRC	1.3.6.1.4.1.1166.6.1.2.16.4.3.12	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT dm870stateflagLaserDataCRC	1.3.6.1.4.1.1166.6.1.2.16.4.3.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR dm870labelAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.16.4.3.14	DisplayString	read-only	The value of this object provides the label of the Alarm Data Crc parameter.
INT dm870valueAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.16.4.3.15	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT dm870stateflagAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.16.4.3.16	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR dm870labelRFInputStatus	1.3.6.1.4.1.1166.6.1.2.16.4.3.17	DisplayString	read-only	The value of this object provides the label of the Alarm Data Crc parameter.
INT dm870valueRFInputStatus	1.3.6.1.4.1.1166.6.1.2.16.4.3.18	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT dm870stateflagRFInputStatus	1.3.6.1.4.1.1166.6.1.2.16.4.3.19	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
gx2Dm870FactoryTable	1.3.6.1.4.1.1166.6.1.2.16.5		not-accessible	This table contains gx2Dm870 specific parameters with nominal and current values.
gx2Dm870FactoryEntry	1.3.6.1.4.1.1166.6.1.2.16.5.4		not-accessible	This list contains Factory parameters and descriptions.
INT gx2Dm870FactoryTableIndex	1.3.6.1.4.1.1166.6.1.2.16.5.4.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
INT dm870bootControlByte	1.3.6.1.4.1.1166.6.1.2.16.5.4.2	INTEGER	read-only	The value of this object indicates which bank the firmware is currently being boot from.
INT dm870bootStatusByte	1.3.6.1.4.1.1166.6.1.2.16.5.4.3	INTEGER	read-only	This object indicates the status of the last boot. Bit 2 = Bank 0/1 Active (0 = Bank 0, 1 = Bank 1), Bit 1 = Bank 1 Fail and Bit 0 = Bank 0 Fail (0 = Pass, 1 = Fail)
INT dm870bank1CRC	1.3.6.1.4.1.1166.6.1.2.16.5.4.4	INTEGER	read-only	This object provides the CRC code of bank 0. The display formate for the data is Hex.
INT dm870bank2CRC	1.3.6.1.4.1.1166.6.1.2.16.5.4.5	INTEGER	read-only	This object provides the CRC code of bank 1.The display formate for the data is Hex.
INT dm870prgEEPROMByte	1.3.6.1.4.1.1166.6.1.2.16.5.4.6	INTEGER	read-only	This object indicates if the EEPROM has been programmed
INT dm870factoryCRC	1.3.6.1.4.1.1166.6.1.2.16.5.4.7	INTEGER	read-only	This object provides the CRC code for the Factory data.
INT dm870calculateCRC	1.3.6.1.4.1.1166.6.1.2.16.5.4.8	INTEGER	read-only	This object indicates which of the Enums will have the CRC calculated.
INT dm870hourMeter	1.3.6.1.4.1.1166.6.1.2.16.5.4.9	INTEGER	read-only	This object provides the hour meter reading of the module.
INT dm870flashPrgCntA	1.3.6.1.4.1.1166.6.1.2.16.5.4.10	INTEGER	read-only	This object provides the number of times Bank 1 flash has been programmed.
INT dm870flashPrgCntB	1.3.6.1.4.1.1166.6.1.2.16.5.4.11	INTEGER	read-only	This object provides the number of times Bank 1 flash has been programmed.
STR dm870flashBankARev	1.3.6.1.4.1.1166.6.1.2.16.5.4.12	DisplayString	read-only	This object provides the revision of flash bank 0. The rev is 2 characters.
STR dm870flashBankBRev	1.3.6.1.4.1.1166.6.1.2.16.5.4.13	DisplayString	read-only	This object provides the revision of flash bank 1. The rev is 2 characters.

RFC description

Manages Omnistar GX2-DM870 laser module performance in HFC cable networks. Monitors optical parameters, signal levels, and module status.

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (gx2Dm870 RF/optical monitoring probe module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OMNI-gx2Dm870-MIB

What Is OMNI-gx2Dm870-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description