OMNI-gx2drr2x-MIB

All MIBs › OMNI-gx2drr2x-MIB

Category: CATV and HFC

Description: Manages the Cisco/Scientific Atlanta GX2 DRR2X dual return receiver module configuration in HFC cable plants.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OMNI-gx2drr2x-MIB?

OMNI-gx2drr2x-MIB is a vendor MIB for the Cisco/Scientific Atlanta GX2 DRR2X, a dual return receiver module used in HFC cable plants to receive upstream (return path) RF signals from subscriber-facing equipment. It exposes configuration objects for the receiver's two return-path channels along with module status information within the GX2 chassis. Its main use is monitoring the hardware health of the return receiver, so an operator can detect a failed receive channel, low receive signal level, or a module that has dropped offline, all of which would disrupt upstream data or telemetry from the plant. It belongs to the OMNI-gx2 family of modules alongside the laser, amplifier, and switch MIBs, sharing a common chassis management approach. It is typically deployed in cable headend or hub HFC plants managing return-path RF reception. Engineers can download the OMNI-gx2drr2x-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OMNI-gx2drr2x-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General Instrument OmniStar GX2 HFC headend/optical node (GX2 DRR2X dual return receiver module)

Monitoring Examples

No sample object names were provided for this module; in practice an operator would poll the DRR2X's per-channel receive-level and module-status objects within the GX2 chassis tree. A drop in receive signal level on one of the two return channels would reveal a failing receiver path affecting upstream traffic from part of the plant. It is typically monitored alongside sibling OMNI-gx2 module MIBs covering the rest of the optical node or headend chassis.

What Can Be Monitored

per-channel return receive level
module operational status
receiver channel configuration

Imported Objects

From GX2HFC-MIB

gx2Drr2x

OBJECT-IDENTITY

From NLSBBN-TRAPS-MIB

trapChangedObjectId	OBJECT-TYPE
trapChangedValueDisplayString	OBJECT-TYPE
trapChangedValueInteger	OBJECT-TYPE
trapIdentifier	OBJECT-TYPE
trapNETrapLastTrapTimeStamp	OBJECT-TYPE
trapNetworkElemAdminState	OBJECT-TYPE
trapNetworkElemAlarmStatus	OBJECT-TYPE
trapNetworkElemAvailStatus	OBJECT-TYPE
trapNetworkElemModelNumber	OBJECT-TYPE
trapNetworkElemOperState	OBJECT-TYPE
trapNetworkElemSerialNum	OBJECT-TYPE
trapPerceivedSeverity	OBJECT-TYPE
trapText	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF trapdrrConfigChangeInteger	1.3.6.1.4.1.1166.6.1.2.21.0.1			This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapdrrConfigChangeDisplayString	1.3.6.1.4.1.1166.6.1.2.21.0.2			This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapdrr12VCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.3			This trap is issued when the 12V power supply Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapdrrModuleTempAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.4			This trap is issued when the Internal Module Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapdrrFanCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.5			This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
NTF trapdrrFlashAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.6			This trap is issued when the detects an error during Flash memory operations.
NTF trapdrrBankBootAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.7			This trap is issued when the module detects an error while booting from bank 0 or bank 1.
NTF trapdrrAlarmDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.8			This trap is issued when the Alarm Data CRC is incorrect.
NTF trapdrrHardwareErrAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.9			This trap is issued when hardware is abnormal.
NTF trapdrrOpticalSignalAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.10			This trap is issued when the optical signal is beyond the preset range.
NTF trapdrrFactoryDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.11			This trap is issued when the Factory Data CRC is incorrect.
NTF trapdrrResetFactoryDefaultAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.12			This trap is issued when the Factory Default Reset occurs.
NTF trapdrrTripPointAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.13			This trap is issued when the Input optical power is lower than the custumer set trip point and trippoint mode as ALARM_ONLY or SWITCH & ALARM.
NTF trapdrrLinkAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.14			This trap is issued when receiver is out of SYN with transmitter
NTF trapdrrCalibrationDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.21.0.15			This trap is issued when the Calibration Data CRC is incorrect
gx2drr2xDescriptor	1.3.6.1.4.1.1166.6.1.2.21.1
gx2drr2xAnalogTable	1.3.6.1.4.1.1166.6.1.2.21.2		not-accessible	This table contains gx2drr2x specific analog parameters with nominal,limits and current values.
gx2drr2xAnalogEntry	1.3.6.1.4.1.1166.6.1.2.21.2.1		not-accessible	This list contains the analog parameters and descriptions.
INT gx2drr2xAnalogTableIndex	1.3.6.1.4.1.1166.6.1.2.21.2.1.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR drr2xlabelRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.2	DisplayString	read-only	The value of this object provides the label of the RF Channel A Attenuation Analog parameter.
STR drr2xuomRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.3	DisplayString	read-only	The value of this object provides the Unit of Measure of the RF Channel A Attenuation Analog parameter. The unit is in dB
FLO drr2xmajorHighRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.4	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xmajorLowRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.5	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xminorHighRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.6	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xminorLowRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.7	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xcurrentValueRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.8	Float	read-write	The value of this object provides the Current value of the RF Channel A Attenuation Analog parameter.
INT drr2xstateFlagRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.9	INTEGER	read-only	The value of this object provides the state of the RF Channel A Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr2xminValueRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.10	Float	read-only	The value of this object provides the minimum value the RF Channel A Attenuation Analog parameter can achive.
FLO drr2xmaxValueRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.11	Float	read-only	The value of this object provides the maximum value the RF Channel A Attenuation Analog parameter can achive.
INT drr2xalarmStateRFAAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.12	INTEGER	read-only	The value of this object provides the curent alarm state of the RF Channel A Attenuation Analog parameter.
STR drr2xlabelRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.13	DisplayString	read-only	The value of this object provides the label of the RF Channel B Attenuation Analog parameter.
STR drr2xuomRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.14	DisplayString	read-only	The value of this object provides the Unit of Measure of the RF Channel B Attenuation Analog parameter.
FLO drr2xmajorHighRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.15	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xmajorLowRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.16	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xminorHighRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.17	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xminorLowRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.18	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. It is kept here for persistence.
FLO drr2xcurrentValueRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.19	Float	read-write	The value of this object provides the Current value of the RF Channel B Attenuation Analog parameter. The unit is dB
INT drr2xstateFlagRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.20	INTEGER	read-only	The value of this object provides the state of the RF Channel B Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr2xminValueRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.21	Float	read-only	The value of this object provides the minimum value the RF Channel B Attenuation Analog parameter can achive.
FLO drr2xmaxValueRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.22	Float	read-only	The value of this object provides the maximum value the RF Channel B Attenuation Analog parameter can achive.
INT drr2xalarmStateRFBAttenuation	1.3.6.1.4.1.1166.6.1.2.21.2.1.23	INTEGER	read-only	The value of this object provides the curent alarm state of the RF Channel B Attenuation Analog parameter.
STR drr2xlabelTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.24	DisplayString	read-only	The value of this object provides the label of the trip point level Analog parameter.
STR drr2xuomTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.25	DisplayString	read-only	The value of this object provides the Unit of Measure of the trip point level Analog parameter.
FLO drr2xmajorHighTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.26	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xmajorLowTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.27	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xminorHighTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.28	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xminorLowTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.29	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xcurrentValueTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.30	Float	read-write	The value of this object provides the Current value of the trip point level Analog parameter. The trip point level set the custumer preferred optical input level. This parameter combined with trippoint mode decides the trippoint alarm and RF channel output impedance. when optical power level is lower than trip point level(Set by this parameter) 1) When trip point mode is ALARM_SWITCH, trip point alarm will be generated and RF output impedance will be changed to high impedance. 2) When trippoint mode is ALARM_ONLY, trippoint alarm will be generated but RF output inpedance remains to be low impedance. This trip point level value is a floating point number that is represented as an IEEE 32 bit number.
INT drr2xstateFlagTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.31	INTEGER	read-only	The value of this object provides the state of the trip point level Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr2xminValueTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.32	Float	read-only	The value of this object provides the minimum value the trip point level Analog parameter can achive.
FLO drr2xmaxValueTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.33	Float	read-only	The value of this object provides the maximum value the trip point level Analog parameter can achive.
INT drr2xalarmStateTrippointLevel	1.3.6.1.4.1.1166.6.1.2.21.2.1.34	INTEGER	read-only	The value of this object provides the curent alarm state of the trip point level Analog parameter.
STR drr2xlabelOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.35	DisplayString	read-only	The value of this object provides the label of the Optical Power Current Analog parameter.
STR drr2xuomOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.36	DisplayString	read-only	The value of this object provides the Unit of Measure of the Optical Power Current Analog parameter.
FLO drr2xmajorHighOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.37	Float	read-only	The value of this object provides the Major High alarm value of the Optical Power Current Analog parameter.
FLO drr2xmajorLowOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.38	Float	read-only	The value of this object provides the Major Low alarm value of the Optical Power Current Analog parameter.
FLO drr2xminorHighOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.39	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xminorLowOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.40	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xcurrentValueOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.41	Float	read-only	The value of this object provides the Current value of the Optical Power Current Analog parameter. The input optical power in lower than min value, drr2xcurrentValueOptCurrent will report -99dBm The input optical power in higher than this value, drr2xcurrentValueOptCurrent will report 99dBm
INT drr2xstateFlagOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.42	INTEGER	read-only	The value of this object provides the state of the Optical Power Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr2xminValueOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.43	Float	read-only	This is recommended min range for display gauge
FLO drr2xmaxValueOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.44	Float	read-only	This is recommended max range for display gauge
INT drr2xalarmStateOptCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.45	INTEGER	read-only	The value of this object provides the curent alarm state of the Optical Power Current Analog parameter.
STR drr2xlabel12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.46	DisplayString	read-only	The value of this object provides the label of the 12v power supply Current Analog parameter.
STR drr2xuom12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.47	DisplayString	read-only	The value of this object provides the Unit of Measure of the 12v power supply Current Analog parameter.
FLO drr2xmajorHigh12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.48	Float	read-only	The value of this object provides the Major High alarm value of the 12v power supply Current Analog parameter.
FLO drr2xmajorLow12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.49	Float	read-only	The value of this object provides the Major Low alarm value of the 12v power supply Current Analog parameter.
FLO drr2xminorHigh12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.50	Float	read-only	The value of this object provides the Minor High alarm value of the 12v power supply Current Analog parameter.
FLO drr2xminorLow12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.51	Float	read-only	The value of this object provides the Minor Low alarm value of the 12v power supply Current Analog parameter.
FLO drr2xcurrentValue12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.52	Float	read-only	The value of this object provides the Current value of the 12v power supply Current parameter.
INT drr2xstateFlag12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.53	INTEGER	read-only	The value of this object provides the state of the 12v power supply Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr2xminValue12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.54	Float	read-only	The value of this object provides the minimum value the 12v power supply Current Analog parameter can achive.
FLO drr2xmaxValue12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.55	Float	read-only	The value of this object provides the maximum value the 12v power supply Current Analog parameter can achive.
INT drr2xalarmState12VCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.56	INTEGER	read-only	The value of this object provides the curent alarm state of the 12v power supply Current Analog parameter.
STR drr2xlabelModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.57	DisplayString	read-only	The value of this object provides the label of the Module Temperature Analog parameter.
STR drr2xuomModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.58	DisplayString	read-only	The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
FLO drr2xmajorHighModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.59	Float	read-only	The value of this object provides the Major High alarm value of the Module Temperature Analog parameter.
FLO drr2xmajorLowModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.60	Float	read-only	The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter.
FLO drr2xminorHighModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.61	Float	read-only	The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter.
FLO drr2xminorLowModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.62	Float	read-only	The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter.
FLO drr2xcurrentValueModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.63	Float	read-only	The value of this object provides the Current value of the Module Temperature Analog parameter.
INT drr2xstateFlagModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.64	INTEGER	read-only	The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr2xminValueModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.65	Float	read-only	The value of this object provides the minimum value the Module Temperature Analog parameter can achive.
FLO drr2xmaxValueModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.66	Float	read-only	The value of this object provides the maximum value the Module Temperature Analog parameter can achive.
INT drr2xalarmStateModTemp	1.3.6.1.4.1.1166.6.1.2.21.2.1.67	INTEGER	read-only	The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
STR drr2xlabelFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.68	DisplayString	read-only	The value of this object provides the label of the Fan Current Analog parameter.
STR drr2xuomFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.69	DisplayString	read-only	The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
FLO drr2xmajorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.70	Float	read-only	The value of this object provides the Major High alarm value of the Fan Current Analog parameter.
FLO drr2xmajorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.71	Float	read-only	The value of this object provides the Major Low alarm value of the Fan Current Analog parameter.
FLO drr2xminorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.72	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xminorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.73	Float	read-only	This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
FLO drr2xcurrentValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.74	Float	read-only	The value of this object provides the Current value of the Fan Current Analog parameter.
INT drr2xstateFlagFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.75	INTEGER	read-only	The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
FLO drr2xminValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.76	Float	read-only	The value of this object provides the minimum value the Fan Current Analog parameter can achive.
FLO drr2xmaxValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.77	Float	read-only	The value of this object provides the maximum value the Fan Current Analog parameter can achive.
INT drr2xalarmStateFanCurrent	1.3.6.1.4.1.1166.6.1.2.21.2.1.78	INTEGER	read-only	The value of this object provides the curent alarm state of the Fan Current Analog parameter.
gx2drr2xDigitalTable	1.3.6.1.4.1.1166.6.1.2.21.3		not-accessible	This table contains gx2drr2x specific digital parameters with nominal and current values.
gx2drr2xDigitalEntry	1.3.6.1.4.1.1166.6.1.2.21.3.2		not-accessible	This list contains individual digital parameters and descriptions.
INT gx2drr2xDigitalTableIndex	1.3.6.1.4.1.1166.6.1.2.21.3.2.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR drr2xlabelTrippointMode	1.3.6.1.4.1.1166.6.1.2.21.3.2.2	DisplayString	read-only	The value of this object provides the label of the Trip point mode Digital parameter. The trip point mode defines the RF switch action based on the optical power input to the DRR
STR drr2xenumTrippointMode	1.3.6.1.4.1.1166.6.1.2.21.3.2.3	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
INT drr2xvalueTrippointMode	1.3.6.1.4.1.1166.6.1.2.21.3.2.4	INTEGER	read-write	The value of this object is the current value of trip point mode. There are three possible value: 1-off, 2-alarm_only, 3-alarm&switch. If module input optical power is higher than the preset trippoint value, no operational difference for these three modes. If module input optical power is less than the preset trippoint value, 1) When trippoint mode is OFF, no trippoint alarm will be generated and RF output impedance will stay normal as low. 2) When tripoint mode is ALARM_ONLY, trip_point alarm will be generated when the input optical power lower than the preset trippoint level but RF output impedance will stay normal as low. 3) When trippoint mode is ALARM_SWITCH, trip point alarm will be generated and RF output impedance will switch to abnorml
INT drr2xstateflagTrippointMode	1.3.6.1.4.1.1166.6.1.2.21.3.2.5	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr2xlabelFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.21.3.2.6	DisplayString	read-only	The value of this object provides the label of the Factory Default Reset Digital parameter.
STR drr2xenumFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.21.3.2.7	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
INT drr2xvalueFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.21.3.2.8	INTEGER	read-write	The read of this value will return a invalid value. The read will not reflect the actual setting value for this parameter
INT drr2xstateflagFactoryDefaultReset	1.3.6.1.4.1.1166.6.1.2.21.3.2.9	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
gx2drr2xStatusTable	1.3.6.1.4.1.1166.6.1.2.21.4		not-accessible	This table contains gx2drr2x specific status parameters with nominal and current values.
gx2drr2xStatusEntry	1.3.6.1.4.1.1166.6.1.2.21.4.3		not-accessible	This list contains Status parameters and descriptions.
INT gx2drr2xStatusTableIndex	1.3.6.1.4.1.1166.6.1.2.21.4.3.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR drr2xlabelBoot	1.3.6.1.4.1.1166.6.1.2.21.4.3.2	DisplayString	read-only	The value of this object provides the label of the Boot Status parameter.
INT drr2xvalueBoot	1.3.6.1.4.1.1166.6.1.2.21.4.3.3	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr2xstateflagBoot	1.3.6.1.4.1.1166.6.1.2.21.4.3.4	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr2xlabelFlash	1.3.6.1.4.1.1166.6.1.2.21.4.3.5	DisplayString	read-only	The value of this object provides the label of the Flash Status parameter.
INT drr2xvalueFlash	1.3.6.1.4.1.1166.6.1.2.21.4.3.6	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr2xstateflagFlash	1.3.6.1.4.1.1166.6.1.2.21.4.3.7	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr2xlabelFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.21.4.3.8	DisplayString	read-only	The value of this object provides the label of the Factory Data CRC Status parameter.
INT drr2xvalueFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.21.4.3.9	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr2xstateflagFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.21.4.3.10	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr2xlabelAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.21.4.3.11	DisplayString	read-only	The value of this object provides the label of the Alarm Data Crc parameter.
INT drr2xvalueAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.21.4.3.12	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr2xstateflagAlarmDataCrc	1.3.6.1.4.1.1166.6.1.2.21.4.3.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr2xlabelCalibrationDataCrc	1.3.6.1.4.1.1166.6.1.2.21.4.3.14	DisplayString	read-only	The value of this object provides the label of the Calibration Data Crc parameter.
INT drr2xvalueCalibrationDataCrc	1.3.6.1.4.1.1166.6.1.2.21.4.3.15	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr2xstateflagCalibrationDataCrc	1.3.6.1.4.1.1166.6.1.2.21.4.3.16	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr2xlabelHardwareStatus	1.3.6.1.4.1.1166.6.1.2.21.4.3.17	DisplayString	read-only	The value of this object provides the label of the Module Hardware Status parameter.
INT drr2xvalueHardwareStatus	1.3.6.1.4.1.1166.6.1.2.21.4.3.18	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr2xstateflagHardwareStatus	1.3.6.1.4.1.1166.6.1.2.21.4.3.19	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr2xlabelOpticTripPointStatus	1.3.6.1.4.1.1166.6.1.2.21.4.3.20	DisplayString	read-only	The value of this object provides the label of the Optical Trip Point Status parameter.It indicates whether the optical power is above(0) or below(1) trip point value
INT drr2xvalueOpticTripPointStatus	1.3.6.1.4.1.1166.6.1.2.21.4.3.21	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr2xstateflagOpticTripPointStatus	1.3.6.1.4.1.1166.6.1.2.21.4.3.22	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
STR drr2xlabelLinkStatus	1.3.6.1.4.1.1166.6.1.2.21.4.3.23	DisplayString	read-only	The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect the optical signal.
INT drr2xvalueLinkStatus	1.3.6.1.4.1.1166.6.1.2.21.4.3.24	INTEGER	read-only	The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
INT drr2xstateflagLinkStatus	1.3.6.1.4.1.1166.6.1.2.21.4.3.25	INTEGER	read-only	The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
gx2drr2xFactoryTable	1.3.6.1.4.1.1166.6.1.2.21.5		not-accessible	This table contains gx2drr2x specific factory setting parameters with nominal and current values.
gx2drr2xFactoryEntry	1.3.6.1.4.1.1166.6.1.2.21.5.4		not-accessible	This list contains Factory setting parameters and descriptions.
INT gx2drr2xFactoryTableIndex	1.3.6.1.4.1.1166.6.1.2.21.5.4.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
INT drr2xbootControlByte	1.3.6.1.4.1.1166.6.1.2.21.5.4.2	INTEGER	read-only	The value of this object indicates which bank the firmware is currently being boot from.
INT drr2xbootStatusByte	1.3.6.1.4.1.1166.6.1.2.21.5.4.3	INTEGER	read-only	This object indicates the status of the last boot
INT drr2xbank1CRC	1.3.6.1.4.1.1166.6.1.2.21.5.4.4	INTEGER	read-only	This object provides the CRC code of bank 0.
INT drr2xbank2CRC	1.3.6.1.4.1.1166.6.1.2.21.5.4.5	INTEGER	read-only	This object provides the CRC code of bank 1.
INT drr2xprgEEPROMByte	1.3.6.1.4.1.1166.6.1.2.21.5.4.6	INTEGER	read-only	This object indicates if the EEPROM has been programmed
INT drr2xfactoryCRC	1.3.6.1.4.1.1166.6.1.2.21.5.4.7	INTEGER	read-only	This object provides the CRC code for the Factory data.
INT drr2xcalculateCRC	1.3.6.1.4.1.1166.6.1.2.21.5.4.8	INTEGER	read-only	This object indicates which of the Emnums will have the CRC calculated (1-factory, 2-alarm, 3-calibration).
INT drr2xhourMeter	1.3.6.1.4.1.1166.6.1.2.21.5.4.9	INTEGER	read-only	This object provides the hour meter reading of the module.
INT drr2xflashPrgCntA	1.3.6.1.4.1.1166.6.1.2.21.5.4.10	INTEGER	read-only	This object provides the number of times Bank 0 flash has been programmed.
INT drr2xflashPrgCntB	1.3.6.1.4.1.1166.6.1.2.21.5.4.11	INTEGER	read-only	This object provides the number of times Bank 1 flash has been programmed.
STR drr2xflashBankARev	1.3.6.1.4.1.1166.6.1.2.21.5.4.12	DisplayString	read-only	This object provides the revision of flash bank 0.
STR drr2xflashBankBRev	1.3.6.1.4.1.1166.6.1.2.21.5.4.13	DisplayString	read-only	This object provides the revision of flash bank 1.
STR drr2xSubAgentRev	1.3.6.1.4.1.1166.6.1.2.21.5.4.14	DisplayString	read-only	This object provides the subagent revision of receiver module.

RFC description

Omnitron Systems iConverter Management Module MIB for managing multi-chassis iConverter equipment. Defines SNMP objects for configuring secure communication protocols between management modules and remote chassis in optical conversion systems.

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 DRR2X dual return receiver module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OMNI-gx2drr2x-MIB

What Is OMNI-gx2drr2x-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description