NMS-IEEE8023-LAG-MIB

All MIBs › NMS-IEEE8023-LAG-MIB

Last Updated: 2010-05-18

Category: LAN Management

Description: Manages NMS Communications IEEE 802.3 Link Aggregation Group configuration, actor/partner state, and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NMS-IEEE8023-LAG-MIB?

NMS-IEEE8023-LAG-MIB is an NMS Communications enterprise MIB implementing the IEEE 802.3ad Link Aggregation Group model, registered under the nmslocal enterprise subtree. It defines dot3adAggTable for aggregator-level configuration (dot3adAggMACAddress, dot3adAggActorSystemID/Priority, dot3adAggActorAdminKey/OperKey, dot3adAggPartnerSystemID), dot3adAggPortListTable and dot3adAggPortTable exposing per-port actor/partner state including LACP keys, system priorities, and BITS-valued actor/partner administrative and operational state (lacpActivity, lacpTimeout, aggregation, synchronization, collecting, distributing, defaulted, expired flags), and a dot3adAggPortStatsTable for per-port LACP statistics. A dot3adTablesLastChanged scalar timestamps the most recent change across the aggregator/port tables, useful for detecting configuration churn. This makes the MIB directly useful for confirming whether a LAG's member ports have successfully negotiated synchronization and are collecting/distributing traffic, versus remaining in a defaulted or non-aggregated state. It depends on IF-MIB (InterfaceIndex) for port identification and Q-BRIDGE-MIB (PortList) for port-set encoding, and is deployed on NMS Communications platforms implementing IEEE 802.3ad link aggregation. Engineers validating LAG health commonly search for the NMS-IEEE8023-LAG-MIB MIB when building SNMP monitoring dashboards.

IPNetwork Monitor allows you to monitor SNMP objects defined in NMS-IEEE8023-LAG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

nms Co., Ltd. switch/router (IEEE 802.3ad Link Aggregation, vendor unidentified)

Monitoring Examples

An operator polls dot3adAggPortTable to check dot3adAggPortActorOperState and dot3adAggPortPartnerOperState for the synchronization and collecting/distributing bits on each LAG member port; a port whose actor state shows synchronization cleared while its partner's key doesn't match dot3adAggPortPartnerOperKey would indicate a mismatched or misconfigured LACP partner preventing that port from joining the aggregate.

What Can Be Monitored

aggregator configuration and system ID/priority
per-port actor/partner LACP key and state bits
port aggregation/synchronization/collecting-distributing status
per-port LACP statistics counters
aggregation tables last-changed timestamp

Imported Objects

From IF-MIB

InterfaceIndex

From NMS-SMI

nmslocal

OBJECT-IDENTITY

From Q-BRIDGE-MIB

PortList

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using dot3adAggPortStatsLACPDUsRx OID:

Select a nms Co., Ltd. switch/router (IEEE 802.3ad Link Aggregation, vendor unidentified) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dot3adAggPortStatsLACPDUsRx into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of valid LACPDUs received on this Aggregation Port. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
dot3adAgg	1.3.6.1.4.1.11606.10.2.232.1.1
LAC dot3adAggActorAdminKey	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.6	LacpKey	read-only	The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-only value. The meaning of particular Key values is of local significance.
LAC dot3adAggActorOperKey	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.7	LacpKey	read-only	The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
MAC dot3adAggActorSystemID	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.4	MacAddress	read-only	A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).
INT dot3adAggActorSystemPriority	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.3	INTEGER	read-write	A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
LAG dot3adAggAdminMode	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.13	LagMode	read-write	The default aggregation control mode of this Aggregator.
T/F dot3adAggAggregateOrIndividual	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.5	TruthValue	read-only	A read-only Boolean value indicating whether the Aggregator represents an Aggregate (`TRUE') or an Individual link (`FALSE').
INT dot3adAggCollectorMaxDelay	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.11	INTEGER	read-write	The value of this 16-bit read-write attribute defines the maximum delay, in tens of microseconds, that may be imposed by the Frame Collector between receiving a frame from an Aggregator Parser, and either delivering the frame to its MAC Client or discarding the frame (see 43.2.3.1.1).
dot3adAggCompliance	1.3.6.1.4.1.11606.10.2.232.2.2.1			The compliance statement for device support of Link Aggregation.
dot3adAggCompliances	1.3.6.1.4.1.11606.10.2.232.2.2
dot3adAggConformance	1.3.6.1.4.1.11606.10.2.232.2
dot3adAggEntry	1.3.6.1.4.1.11606.10.2.232.1.1.1.1		not-accessible	A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator.
dot3adAggGroup	1.3.6.1.4.1.11606.10.2.232.2.1.1			A collection of objects providing information about an aggregation.
dot3adAggGroups	1.3.6.1.4.1.11606.10.2.232.2.1
NUM dot3adAggIfIndex	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.12	InterfaceIndex	read-only	The interface index of this Aggregator.
NUM dot3adAggIndex	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.1	InterfaceIndex	not-accessible	The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only.
MAC dot3adAggMACAddress	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.2	MacAddress	read-only	A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator.
INT dot3adAggMaxNum	1.3.6.1.4.1.11606.10.2.232.1.4	INTEGER	read-only	A value indicates the max number of Aggregators supported in the system.
LAG dot3adAggOperMode	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.14	LagMode	read-only	The running aggregation control mode of this Aggregator.
LAC dot3adAggPartnerOperKey	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.10	LacpKey	read-only	The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read-only value. If the aggregation is manually configured, this Key value will be a value assigned by the local System.
MAC dot3adAggPartnerSystemID	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.8	MacAddress	read-only	A 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System.
INT dot3adAggPartnerSystemPriority	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.9	INTEGER	read-only	A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System.
dot3adAggPort	1.3.6.1.4.1.11606.10.2.232.1.2
LAC dot3adAggPortActorAdminKey	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.4	LacpKey	read-only	The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
LAC dot3adAggPortActorAdminState	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.20	LacpState	read-only	A string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-only.
LAC dot3adAggPortActorOperKey	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.5	LacpKey	read-only	The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
LAC dot3adAggPortActorOperState	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.21	LacpState	read-only	A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-only.
INT dot3adAggPortActorPort	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.14	INTEGER	read-only	The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only.
INT dot3adAggPortActorPortPriority	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.15	INTEGER	read-only	The priority value assigned to this Aggregation Port. This 16-bit value is read-only.
MAC dot3adAggPortActorSystemID	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.3	MacAddress	read-only	A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port.
INT dot3adAggPortActorSystemPriority	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.2	INTEGER	read-only	A 2-octet read-write value used to define the priority value associated with the Actor's System ID.
T/F dot3adAggPortAggregateOrIndividual	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.24	TruthValue	read-only	A read-only Boolean value indicating whether the Aggregation Port is able to Aggregate (`TRUE') or is only able to operate as an Individual link (`FALSE').
NUM dot3adAggPortAttachedAggID	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.13	InterfaceIndex	read-only	The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only.
C32 dot3adAggPortDebugActorChangeCount	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.11	Counter32	read-only	Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only.
C32 dot3adAggPortDebugActorChurnCount	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.7	Counter32	read-only	Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only.
CHU dot3adAggPortDebugActorChurnState	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.5	ChurnState	read-only	The state of the Actor Churn Detection machine (43.4.17) for the Aggregation Port. A value of `noChurn' indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and `churn' indicates that the state machine is in the ACTOR_CHURN state. This value is read-only.
C32 dot3adAggPortDebugActorSyncTransitionCount	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.9	Counter32	read-only	Count of the number of times the Actor's Mux state machine (43.4.15) has entered the IN_SYNC state. This value is read-only.
dot3adAggPortDebugEntry	1.3.6.1.4.1.11606.10.2.232.1.2.3.1		not-accessible	A list of the debug parameters for a port.
dot3adAggPortDebugGroup	1.3.6.1.4.1.11606.10.2.232.2.1.5			A collection of objects providing debug information about every aggregated port.
TIK dot3adAggPortDebugLastRxTime	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.2	TimeTicks	read-only	The value of aTimeSinceSystemReset (F.2.1) when the last LACPDU was received by this Aggregation Port. This value is read-only.
STR dot3adAggPortDebugMuxReason	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.4	DisplayString	read-only	A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only.
INT dot3adAggPortDebugMuxState	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.3	INTEGER	read-only	This attribute holds the value `detached' if the Mux state machine (43.4.14) for the Aggregation Port is in the DETACHED state, `waiting' if the Mux state machine is in the WAITING state, `attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, `collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, `distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and `collectingDistributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only.
C32 dot3adAggPortDebugPartnerChangeCount	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.12	Counter32	read-only	Count of the number of times the Partner's perception of the LAG ID (see 43.3.6.1) for this Aggregation Port has changed. This value is read-only.
C32 dot3adAggPortDebugPartnerChurnCount	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.8	Counter32	read-only	Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only.
CHU dot3adAggPortDebugPartnerChurnState	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.6	ChurnState	read-only	The state of the Partner Churn Detection machine (43.4.17) for the Aggregation Port. A value of `noChurn' indicates that the state machine is in either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and `churn' indicates that the state machine is in the PARTNER_CHURN state. This value is read-only.
C32 dot3adAggPortDebugPartnerSyncTransitionCount	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.10	Counter32	read-only	Count of the number of times the Partner's Mux state machine (43.4.15) has entered the IN_SYNC state. This value is read-only.
INT dot3adAggPortDebugRxState	1.3.6.1.4.1.11606.10.2.232.1.2.3.1.1	INTEGER	read-only	This attribute holds the value `currentRx' if the Receive state machine for the Aggregation Port is in the CURRENT state, `expired' if the Receive state machine is in the EXPIRED state, `defaulted' if the Receive state machine is in the DEFAULTED state, `initialize' if the Receive state machine is in the INITIALIZE state, `lacpDisabled' if the Receive state machine is in the LACP_DISABLED state, or `portDisabled' if the Receive state machine is in the PORT_DISABLED state. This value is read-only.
dot3adAggPortDebugTable	1.3.6.1.4.1.11606.10.2.232.1.2.3		not-accessible	A table that contains Link Aggregation debug information about every port that is associated with this device. A row appears in this table for each physical port.
dot3adAggPortEntry	1.3.6.1.4.1.11606.10.2.232.1.2.1.1		not-accessible	A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device.
dot3adAggPortGroup	1.3.6.1.4.1.11606.10.2.232.2.1.3			A collection of objects providing information about every port in an aggregation.
NUM dot3adAggPortIndex	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.1	InterfaceIndex	not-accessible	The ifIndex of the port
POR dot3adAggPortListAggregatedPorts	1.3.6.1.4.1.11606.10.2.232.1.1.2.1.2	PortList	read-only	The complete set of ports currently aggregated in this Aggregator.
dot3adAggPortListEntry	1.3.6.1.4.1.11606.10.2.232.1.1.2.1		not-accessible	A list of the ports associated with a given Aggregator. This is indexed by the ifIndex of the Aggregator.
dot3adAggPortListGroup	1.3.6.1.4.1.11606.10.2.232.2.1.2			A collection of objects providing information about every port in an aggregation.
POR dot3adAggPortListPorts	1.3.6.1.4.1.11606.10.2.232.1.1.2.1.1	PortList	read-write	The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation.
dot3adAggPortListTable	1.3.6.1.4.1.11606.10.2.232.1.1.2		not-accessible	A table that contains a list of all the ports associated with each Aggregator.
LAG dot3adAggPortOperMode	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.25	LagMode	read-only	The running link aggregation control mode.
LAC dot3adAggPortPartnerAdminKey	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.10	LacpKey	read-only	The current administrative value of the Key for the protocol Partner. This is a 16-bit read-only value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
INT dot3adAggPortPartnerAdminPort	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.16	INTEGER	read-only	The current administrative value of the port number for the protocol Partner. This is a 16-bit read-only value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
INT dot3adAggPortPartnerAdminPortPriority	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.18	INTEGER	read-only	The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-only value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, in order to achieve manually configured aggregation.
LAC dot3adAggPortPartnerAdminState	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.22	LacpState	read-only	A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-only. The assigned value is used in order to achieve manually configured aggregation.
MAC dot3adAggPortPartnerAdminSystemID	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.8	MacAddress	read-only	A 6-octet read-only MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
INT dot3adAggPortPartnerAdminSystemPriority	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.6	INTEGER	read-only	A 2-octet read-only value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
LAC dot3adAggPortPartnerOperKey	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.11	LacpKey	read-only	The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-bit read-only value.
INT dot3adAggPortPartnerOperPort	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.17	INTEGER	read-only	The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only.
INT dot3adAggPortPartnerOperPortPriority	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.19	INTEGER	read-only	The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol Partner. This 16-bit value is read-only.
LAC dot3adAggPortPartnerOperState	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.23	LacpState	read-only	A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit allocations are as defined in 30.7.2.1.20. In the absence of an active protocol Partner, this value may reflect the manually configured value aAggPortPartnerAdminState. This attribute value is read-only.
MAC dot3adAggPortPartnerOperSystemID	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.9	MacAddress	read-only	A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol Partner.
INT dot3adAggPortPartnerOperSystemPriority	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.7	INTEGER	read-only	A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner.
NUM dot3adAggPortSelectedAggID	1.3.6.1.4.1.11606.10.2.232.1.2.1.1.12	InterfaceIndex	read-only	The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only.
INT dot3adAggPortsMaxNum	1.3.6.1.4.1.11606.10.2.232.1.5	INTEGER	read-only	A value indicates the max number of aggregated ports in one Aggregator.
dot3adAggPortStatsEntry	1.3.6.1.4.1.11606.10.2.232.1.2.2.1		not-accessible	A list of Link Aggregation Control Protocol statistics for each port on this device.
dot3adAggPortStatsGroup	1.3.6.1.4.1.11606.10.2.232.2.1.4			A collection of objects providing information about every port in an aggregation.
C32 dot3adAggPortStatsIllegalRx	1.3.6.1.4.1.11606.10.2.232.1.2.2.1.5	Counter32	read-only	The number of frames received that carry the Slow Protocols Ethernet Type value (43B.4), but contain a badly formed PDU or an illegal value of Protocol Subtype (43B.4). This value is read-only.
C32 dot3adAggPortStatsLACPDUsRxEx	1.3.6.1.4.1.11606.10.2.232.1.2.2.1.1	Counter32	read-only	The number of valid LACPDUs received on this Aggregation Port. This value is read-only.
C32 dot3adAggPortStatsLACPDUsTx	1.3.6.1.4.1.11606.10.2.232.1.2.2.1.6	Counter32	read-only	The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.
C32 dot3adAggPortStatsMarkerPDUsRx	1.3.6.1.4.1.11606.10.2.232.1.2.2.1.2	Counter32	read-only	The number of valid Marker PDUs received on this Aggregation Port. This value is read-only.
C32 dot3adAggPortStatsMarkerPDUsTx	1.3.6.1.4.1.11606.10.2.232.1.2.2.1.7	Counter32	read-only	The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only.
C32 dot3adAggPortStatsMarkerResponsePDUsRx	1.3.6.1.4.1.11606.10.2.232.1.2.2.1.3	Counter32	read-only	The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only.
C32 dot3adAggPortStatsMarkerResponsePDUsTx	1.3.6.1.4.1.11606.10.2.232.1.2.2.1.8	Counter32	read-only	The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only.
dot3adAggPortStatsTable	1.3.6.1.4.1.11606.10.2.232.1.2.2		not-accessible	A table that contains Link Aggregation information about every port that is associated with this device. A row appears in this table for each physical port.
C32 dot3adAggPortStatsUnknownRx	1.3.6.1.4.1.11606.10.2.232.1.2.2.1.4	Counter32	read-only	The number of frames received that either: - carry the Slow Protocols Ethernet Type value (43B.4), but contain an unknown PDU, or: - are addressed to the Slow Protocols group MAC Address (43B.3), but do not carry the Slow Protocols Ethernet Type. This value is read-only.
dot3adAggPortTable	1.3.6.1.4.1.11606.10.2.232.1.2.1		not-accessible	A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port.
ROW dot3adAggRowStatus	1.3.6.1.4.1.11606.10.2.232.1.1.1.1.15	RowStatus	read-create	This object indicates the status of this entry. Set this value to 'createAndGo' to create a new aggregator.
dot3adAggTable	1.3.6.1.4.1.11606.10.2.232.1.1.1		not-accessible	A table that contains information about every Aggregator that is associated with this System.
TIK dot3adTablesLastChanged	1.3.6.1.4.1.11606.10.2.232.1.3	TimeTicks	read-only	This object indicates the time of the most recent change to the dot3adAggTable, dot3adAggPortListTable, or dot3adAggPortTable.
dot3adTablesLastChangedGroup	1.3.6.1.4.1.11606.10.2.232.2.1.1.6			A collection of objects providing information about the time of changes to the configuration of aggregations and their ports.
lagMIB	1.3.6.1.4.1.11606.10.2.232			The Link Aggregation module for managing IEEE Std 802.3ad.
lagMIBObjects	1.3.6.1.4.1.11606.10.2.232.1

RFC description

Implements IEEE 802.3ad link aggregation and LACP (Link Aggregation Control Protocol) management for network interfaces.

Start monitoring nms Co., Ltd. switch/router (IEEE 802.3ad Link Aggregation, vendor unidentified) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NMS-IEEE8023-LAG-MIB