NMS-IEEE8023-LAG-MIB :: dot3adAggPortActorAdminState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNMS-IEEE8023-LAG-MIBdot3adAggPortActorAdminState

dot3adAggPortActorAdminState

Module: NMS-IEEE8023-LAG-MIB

OID (symbolic): NMS-IEEE8023-LAG-MIB::dot3adAggPortActorAdminState

OID (numeric): 1.3.6.1.4.1.11606.10.2.232.1.2.1.1.20

Node type: OBJECT-TYPE

Type: LacpState

Access: read-only

Description: A string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-only.

What is dot3adAggPortActorAdminState?

This read-only 8-bit LacpState string reports the administratively configured Actor_State flags (LACP_Activity, LACP_Timeout, Aggregation, Synchronization, Collecting, Distributing, Defaulted, Expired) this port would transmit in LACPDUs. Admins use this to verify the administrative LACP behavior (active vs passive mode, short vs long timeout) configured for this port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11606.10.2.232.1.2.1.1.20
snmpwalk -v2c -c public <target> NMS-IEEE8023-LAG-MIB::dot3adAggPortActorAdminState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11606.10.2.232.1.2.1.1.20.1
snmpget -v2c -c public <target> NMS-IEEE8023-LAG-MIB::dot3adAggPortActorAdminState.1

Start monitoring nms Co., Ltd. switch/router (IEEE 802.3ad Link Aggregation, vendor unidentified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NMS-IEEE8023-LAG-MIB::dot3adAggPortActorAdminState OID value, configure state conditions and alerts, and monitor any nms Co., Ltd. switch/router (IEEE 802.3ad Link Aggregation, vendor unidentified) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11606pbnPBN-ROOT
1.3.6.1.4.1.11606.10nmsNMS-SMI
1.3.6.1.4.1.11606.10.2nmslocalNMS-SMI
Numeric OIDNameModule
1.3.6.1.4.1.11606.10.2.232lagMIBNMS-IEEE8023-LAG-MIB
1.3.6.1.4.1.11606.10.2.232.1lagMIBObjectsNMS-IEEE8023-LAG-MIB
1.3.6.1.4.1.11606.10.2.232.1.2dot3adAggPortNMS-IEEE8023-LAG-MIB
1.3.6.1.4.1.11606.10.2.232.1.2.1dot3adAggPortTableNMS-IEEE8023-LAG-MIB
1.3.6.1.4.1.11606.10.2.232.1.2.1.1dot3adAggPortEntryNMS-IEEE8023-LAG-MIB
1.3.6.1.4.1.11606.10.2.232.1.2.1.1.20dot3adAggPortActorAdminStateNMS-IEEE8023-LAG-MIB