CENTRECOM-SYSTEM-MIB

All MIBs › CENTRECOM-SYSTEM-MIB

Organization: Allied Telesis K.K

Last Updated: 1998-10-02

Category: LAN Management, Switch Management

Description: Monitors system-level parameters including CPU, memory, and firmware on Allied Telesis CentreCOM devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CENTRECOM-SYSTEM-MIB?

CENTRECOM-SYSTEM-MIB is an Allied Telesis K.K. proprietary MIB (Centrecom switch line) reporting chassis system status. Its objects cover a save-configuration action and status, current/on-reboot configuration selection, over-temperature alarm and current temperature, a fan-status table (fan number, operational flag), primary-power operational flag, redundant-power status/alarm, primary/secondary software revision, on-reboot image selection, and system/board ID objects (system, left board, right board). As a hardware-status MIB it lets an administrator watch temperature and power-supply/fan health on a Centrecom (Allied Telesis) switch. It is deployed on Allied Telesis Centrecom switches. Engineers can download the CENTRECOM-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CENTRECOM-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Allied Telesis Centrecom switches

Monitoring Examples

An administrator checks atiOverTemperatureAlarm and atiRedundantPowerAlarm to catch a thermal or power-supply problem on an Allied Telesis Centrecom switch.

What Can Be Monitored

chassis temperature and power/fan health

Imported Objects

From CENTRECOM-MIB

extSwitchMIB

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

MODULE-IDENTITY

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
atiSwitchSystem	1.3.6.1.4.1.207.8.12.2.3			Atkk Switch System objects
INT atiSaveConfiguration	1.3.6.1.4.1.207.8.12.2.3.3	INTEGER	write-only	When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value of the object. The save is performed asynchronously, and the snmp agent will continue to respond to both gets and sets while the save is taking place. A network management application may use the atiSaveStatus object to determine when the asynchronous save operation has completed.
INT atiSaveStatus	1.3.6.1.4.1.207.8.12.2.3.4	INTEGER	read-only	This object will return the status of a save operation invoked by setting the atiSaveConfiguration object. A network management application can read this object to determine that a save operation has completed.
INT atiCurrentConfigInUse	1.3.6.1.4.1.207.8.12.2.3.5	INTEGER	read-only	Shows which NVRAM configuration store was used at last boot
INT atiConfigToUseOnReboot	1.3.6.1.4.1.207.8.12.2.3.6	INTEGER	read-write	Controls which NVRAM configuration store will be used on next reboot.
T/F atiOverTemperatureAlarm	1.3.6.1.4.1.207.8.12.2.3.7	TruthValue	read-only	Alarm status of overtemperature sensor in device enclosure.
INT atiCurrentTemperature	1.3.6.1.4.1.207.8.12.2.3.8	INTEGER	read-only	Current temperature in degrees celcius measured inside device enclosure.
atiFanStatusTable	1.3.6.1.4.1.207.8.12.2.3.9		not-accessible	Table of operational status of all internal cooling fans.
atiFanStatusEntry	1.3.6.1.4.1.207.8.12.2.3.9.1		not-accessible	Entry in table of all internal cooling fans.
INT atiFanNumber	1.3.6.1.4.1.207.8.12.2.3.9.1.1	INTEGER	read-only	Identifier of cooling fan, numbered from the front and/or left side of device.
T/F atiFanOperational	1.3.6.1.4.1.207.8.12.2.3.9.1.2	TruthValue	read-only	Operational status of a cooling fan.
T/F atiPrimaryPowerOperational	1.3.6.1.4.1.207.8.12.2.3.10	TruthValue	read-only	Operational status of internal power supply of a device.
INT atiRedundantPowerStatus	1.3.6.1.4.1.207.8.12.2.3.11	INTEGER	read-only	Operational status of an external redundant power supply to a device.
T/F atiRedundantPowerAlarm	1.3.6.1.4.1.207.8.12.2.3.12	TruthValue	read-only	Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition.
STR atiPrimarySoftwareRev	1.3.6.1.4.1.207.8.12.2.3.13	DisplayString	read-only	The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device.
STR atiSecondarySoftwareRev	1.3.6.1.4.1.207.8.12.2.3.14	DisplayString	read-only	The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device.
INT atiImageToUseOnReboot	1.3.6.1.4.1.207.8.12.2.3.15	INTEGER	read-write	Controls which image will be used on next reboot.
STR atiSystemID	1.3.6.1.4.1.207.8.12.2.3.16	DisplayString	read-only	This represents the System ID of the Switch.
STR atiSystemBoardID	1.3.6.1.4.1.207.8.12.2.3.17	DisplayString	read-only	This represents the Board ID of the Switch.
STR atiSystemLeftBoardID	1.3.6.1.4.1.207.8.12.2.3.18	DisplayString	read-only	This represents the Left Board ID of the Summit Switch.
STR atiSystemRightBoardID	1.3.6.1.4.1.207.8.12.2.3.19	DisplayString	read-only	This represents the Right Board ID of the Summit Switch.

RFC description

Bay Networks/Nortel Centrecom legacy vendor MIB for system-level management including device identification, uptime, and hardware configuration.

Start monitoring Allied Telesis CentreCOM Ethernet switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CENTRECOM-SYSTEM-MIB

What Is CENTRECOM-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description