Description: This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The cross feed direction is ninety degrees relative to the feed direction associated with this sub-unit. This dimension is measured in input sub-unit dimensional units (prtInputDimUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests. Otherwise, the value may be changed. The value (-1) means other and specifically means that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Refer to Standard Printer MIB for more details. Additional information: For trays 2, 3, and 5 (which can reliably sense this value) these objects behave exactly the same as prtInputMediaDimXFeedDirChosen. Attempting to set these objects for tray 2, 3, and 5 will cause to be returned. The default values assume the trays are configured for letter size paper (or COM10, in the case of the envelope feeder). For tray 1 the value is the dimension for the media size currently declared. Valid values are 0 to 268435455. If a value within 0.2 inches of a standard size (e.g. 85001) is chosen when setting these objects, the standard size will be set for the specified tray if the value of prtInputMediaDimFeedDirDeclared is also set to within 0.2 inches of the same standard size. If the value is not within 0.2 inches, Custom will be chosen as the size if it is supported by the specified tray, otherwise the first available standard size for the tray will be selected.